- 24 Feb, 2012 8 commits
-
-
Chris Kelly authored
Added tracing facilities and also memory allocation and URB tracking. This is for debugging purposes and is all optional and can be switched out at compile time. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
The event logging subsystem allows internal events in the driver to be logged. This facilitates testing the correct operation of the driver. This subsystem is optional and can be switched out at compile time. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
The character device provides a management interface to the driver and also provides an additional service to the protocol for side band communication with the device. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
The L2 protocol supports various services, one of which is USB. This provides the implementation of that service and plumbs it to the virtual USB HCD. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
Added the implementation of the virtual USB HCD that is used to present devices connected via the network to the USB subsystem. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
Added support for maintaining state and data buffering for devices connected via the network. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
Added the basic implementation of the L2 protocol support used to communicate with devices over the network. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Kelly authored
This series of patches adds the Ozmo USB over WiFi driver to the driver staging directory. This is a driver for a virtual USB HCD and uses an L2 network protocol to talk to the device. This patch adds the driver entry code and a README file with more details. Signed-off-by: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 Feb, 2012 1 commit
-
-
Greg Kroah-Hartman authored
It can't seem to build properly, so let's just mark it broken until stuff sorts itself out. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Feb, 2012 4 commits
-
-
Danny Kukawka authored
drivers/staging/sm7xx/smtcfb.c included 'linux/module.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jesper Juhl authored
In drivers/staging/rtl8192e/rtllib_softmac.c::rtllib_rx_assoc_resp() we allocate memory for 'network' with kzalloc() and then proceed to zero the already zeroed mem we got from kzalloc() with memset(). That's redundant, so remove the memset() We also fail to kfree() the memory we allocated for 'network' if we do not enter if (ieee->current_network.qos_data.supported == 1) { and the variable then goes out of scope. To fix that I simply moved the kfree() that was inside that 'if' statement to instead be just after it. It then covers both the case where we take the branch and when we don't. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roland Stigge authored
This patch adds a 3-channel ADC driver for the LPC32xx ARM SoC Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jorgyano Vieira authored
Improvement of debug macros to ensure safe use on if/else statements. Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 Feb, 2012 7 commits
-
-
Greg Kroah-Hartman authored
My old email address was in some TODO files, so this fixes that issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Magenheimer authored
RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM. This patch adds new files necessary for ramster support: The file ramster.h declares externs and some pampd bitfield manipulation. The file zcache.h declares some zcache functions that now must be accessed from the ramster glue code. The file r2net.c is the glue between zcache and the messaging layer, providing routines called from zcache that initiate messages, and routines that handle messages by calling zcache. TODO explains future plans for merging. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Magenheimer authored
RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM. This patch incorporates changes transforming zcache to work with a remote store. In tmem.[ch], new "repatriate" (provoke async get) and "localify" (handle incoming data resulting from an async get) routines combine with a handful of changes to existing pamops interfaces allow the generic tmem code to support asynchronous operations. Also, a new tmem_xhandle struct groups together key information that must be passed to remote tmem stores. Zcache-main.c is augmented with a large amount of ramster-specific code to handle remote operations and "foreign" pages on both ends of the "remotify" protocol. New "foreign" pools are auto-created on demand. A "selfshrinker" thread periodically repatriates remote persistent pages when local memory conditions allow. For certain operations, a queue is necessary to guarantee strict ordering as out-of-order puts/flushes can cause strange race conditions. Pampd pointers now either point to local memory OR describe a remote page; to allow the same 64-bits to describe either, the LSB is used to differentiate. Some acrobatics must be performed to ensure local memory is available to handle a remote persistent get, or deal with the data directly anyway if the malloc failed. Lots of ramster-specific statistics are available via sysfs. Note: Some debug ifdefs left in for now. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Magenheimer authored
RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM. Zcache is in the process of converting allocators, from xvmalloc to zsmalloc. Further, RAMster V5 testing to date has been done only with xvmalloc. To avoid merging problems, a linux-3.2 copy of xvmalloc is incorporated by this patch. Later patches will be able to eliminate xvmalloc and use zsmalloc. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Magenheimer authored
RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM. This patch copies files from drivers/staging/zcache. RAMster compresses pages locally before transmitting them to another node, so we can leverage the zcache and tmem code directly. Note: there are no ramster-specific changes yet to these files. (Why copy? The ramster tmem.c/tmem.h changes are definitely shareable between zcache and ramster; the eventual destination for tmem.c is the linux lib directory. Ramster changes to zcache are more substantial and zcache is currently undergoing some significant unrelated changes (including a new allocator and breaking zcache-main.c into smaller files), so it seemed best to branch temporarily and merge later.) Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Magenheimer authored
RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM. This patch provides the cluster and messaging foundation for RAMster, implementing the basic cluster discovery, mapping, heartbeat / keepalive, and messaging ("r2net") that RAMster requires for internode communication. This code heavily leverages code from the ocfs2 cluster layer but has been extended, interfaces to userland changed, and external functions renamed so that RAMster and ocfs2 can co-exist in the kernel and userland. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Magenheimer authored
RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM. Enable build of ramster as a staging driver Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 Feb, 2012 14 commits
-
-
Omar Ramirez Luna authored
There are two members of pr_ctxt allocated during bridge_open that are never freed resulting in memory leaks, these are stream_id and node_id, they are now freed on release of the handle (bridge_release) right before freeing pr_ctxt. Error path for bridge_open was also fixed since the same variables could result in memory leaking due to missing handling of failure scenarios. While at it, the indentation changes were introduced to avoid interleaved goto statements inside big if blocks. Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
DRIVER_HALT is a driver state that was originally defined as a #define statement. This patch moves it to the LedEvents type as an enumerated value for the purpose of removing a compile time warning: drivers/staging/bcm/led_control.c: In function ‘LEDControlThread’: drivers/staging/bcm/led_control.c:817:3: warning: case value ‘255’ not in enumerated type ‘LedEventInfo_t’ [-Wswitch] Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nitin Gupta authored
zram accepts number of devices to be created as a module parameter. This was renamed from num_devices to zram_num_devices (without updating the documentation!) since num_devices was declared as a non-static global variable, polluting the global namespace. Now, we declare it as a static variable and revert back the name change. The documentation (zram.txt) already mentions num_devices as the module parameter name. Signed-off-by: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Add a small evtest like application to monitor events generated by an IIO device. The application can be used as an example on how to listen for IIO events and also is usful for testing and debugging device drivers which generate IIO events. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Add macros for extracting whether the event is for a differential channel and the second channel number from the event code. These were the only two fields which did not have such an macro yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
We name this field "chan" throughout IIO with the exception of this one macro. Rename it to be more consistent. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Commit 43ba1100 ("staging:iio:events: Use waitqueue lock to protect event queue") removed the event_list_lock field from the iio_event_interface struct, but missed to remove the same field from the documentation for that function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josenivaldo Benito Jr authored
Declaration between .h and .c was mismatched. Matched both declara tions avoiding an sparse check error. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josenivaldo Benito Jr authored
Fixed a pointer declaration coding style issue. *foo not * foo Signed-off-by: Josenivaldo Benito Jr. <jrbenito@benito.qsl.br> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Axel Lin authored
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Szymon Janc authored
acpi_size is u32 or u64 depending on architecture. Cast it to unsigned long and use %lu for printing. This fix following build warning: drivers/staging/quickstart/quickstart.c: In function ‘quickstart_acpi_ghid’: drivers/staging/quickstart/quickstart.c:212:5: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 3 has type ‘acpi_size’ [-Wformat] Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Szymon Janc authored
Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Szymon Janc authored
Use scnprintf instead of snprintf in quickstart_pressed_button_show as suggested in Documentation/filesystems/sysfs.txt. Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Rientjes authored
/proc/pid/oom_adj is deprecated and will be removed in August 2012 according to Documentation/feature-removal-schedule.txt. Convert its usage in the lowmemorykiller to use the new interface, oom_score_adj, instead. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 Feb, 2012 3 commits
-
-
Alan Cox authored
SEP build fails if crypto is not selected. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
K. Y. Srinivasan authored
The storage driver (storvsc_drv.c) handles all block storage devices assigned to Linux guests hosted on Hyper-V. This driver has been in the staging tree for a while and this patch moves it out of the staging area. James was willing to apply this patch during the 3.3-rc phase and a decision was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc patches for 3.4. Now that Greg has applied all of the pending storvsc patches, I am sending this patch to move this driver out of staging. Based on James' recommendation, this patch gets rid of the unneeded files in the staging/hv directory. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Seth Jennings authored
linux/vmalloc.h added to zsmalloc-main.c to resolve implicit declaration errors. X86 dependency added to zsmalloc and dependent drivers zcache and zram. This X86 only requirement is not ideal. Working to find portable functions for __flush_tlb_one and set_pte. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 Feb, 2012 3 commits
-
-
Greg Kroah-Hartman authored
This was done to resolve some merge issues with the following files that had changed in both branches: drivers/staging/rtl8712/rtl871x_sta_mgt.c drivers/staging/tidspbridge/rmgr/drv_interface.c drivers/staging/zcache/zcache-main.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark A. Allyn authored
This gets the SEP crypto layer up and running with things like dmcrypt. It's a fairly big set of changes because it has to rework the whole context handling system. [This is picked out of the differences between the upstream driver and the staging driver. I'm resolving the differences as a series of updates -AC] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark A. Allyn authored
[This is picked out of the differences between the upstream driver and the staging driver. I'm resolving the differences as a series of updates -AC] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-