The variables i and offset in block_write() are set in the code
before they are used. Remove the unneeded initializations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-6-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For cleaner code and improved readability we can reduce the number
of local variables in block_write(). Use a single variable for block
size, number of blocks and remaining size.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-5-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The second parameter of write_fw(), page_write() and block_write()
is a void pointer, but we always pass an u8 pointer. We can convert
this parameter to an u8 pointer. The pointer is not changed in the
functions, so we can safely remove the local variable bufferPtr.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-4-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the parameter buffSize of block_write() to avoid camel case.

buffSize -> size
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct a macro spelling mistake in rtw_fw.c.

MAX_REG_BOLCK_SIZE -> MAX_REG_BLOCK_SIZE
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below:

   (Thread 1)                |      (Thread 2)
                             | _set_timer()
rtw_joinbss_event_prehandle()|  mod_timer()
 spin_lock_bh() //(1)        |  (wait a time)
 ...                         | rtw_join_timeout_handler()
                             |  _rtw_join_timeout_handler()
 del_timer_sync()            |   spin_lock_bh() //(2)
 (wait timer to stop)        |   ...

We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409072135.74248-1-duoming@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a deadlock in rtw_joinbss_event_prehandle(), which is shown
below:

   (Thread 1)                |      (Thread 2)
                             | _set_timer()
rtw_joinbss_event_prehandle()|  mod_timer()
 spin_lock_bh() //(1)        |  (wait a time)
 ...                         | _rtw_join_timeout_handler()
 del_timer_sync()            |  spin_lock_bh() //(2)
 (wait timer to stop)        |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409064953.67420-1-duoming@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a deadlock in rtw_surveydone_event_callback(),
which is shown below:

   (Thread 1)                  |      (Thread 2)
                               | _set_timer()
rtw_surveydone_event_callback()|  mod_timer()
 spin_lock_bh() //(1)          |  (wait a time)
 ...                           | rtw_scan_timeout_handler()
 del_timer_sync()              |  spin_lock_bh() //(2)
 (wait timer to stop)          |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_surveydone_event_callback() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() in
rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise,
spin_lock_bh() will also cause deadlock() in timer handler.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409061836.60529-1-duoming@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adhere to linux coding style.

Reported by checkpatch:

spaces preferred around that '{operator}'.
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220413054517.6343-1-mahak_g@cs.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the optional remove callback for the soc_codec_dev_gbaudio
structure. The only place it is referenced is
snd_soc_component_remove() which is only called if the sound_component
pointer is non-null. The null function pointers here can be optionally
ommitted. When a sound component is registered this way, the remove
callback is optional. We can safely remove the whole gbcodec_remove
function, which used to be an empty function with a void return type.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/12037ae2502ad7d0311bcdf2178c3d2156293236.1649824370.git.jhpark1013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct a spelling typo from 'Atleast' to 'At least' in comment.
Issue found by checkpatch.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/2feb03de97ca4dbd27c22cf40f8e185f7dfaae29.1649824370.git.jhpark1013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Else is not necessary after return and break statements, hence remove
it.

Reported by checkpatch:

WARNING: else is not generally useful after a break or return
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220413052759.4859-1-mahak_g@cs.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove compat ALSA card, which has overlapping functionality with the
two other cards described by the driver (HDMI and headphones)

This handles TODO item "Revisit multi-cards options and PCM route mixer
control".

Move the S/PDIF device that was part of the compat ALSA card to the HDMI
card.

Only enable headphones card by default, because HDMI breaks when using
both vc4 and bcm2835-audio with HDMI card enabled.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220408150359.26661-1-athierry@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

rtllib_sta_ps() and ieee80211_sta_ps() will now run in process context
and have further concurrency (tasklets being serialized among themselves),
but this is done holding the ieee->lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-7-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is unused.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-6-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

The execution of the SME event will now occur in task context. There
are, however, changes in concurrency. Workqueues, unlike tasklets,
are not serialized among themselves and can run concurrently
updating sme_i.qhead. However, the current code is already exposed
in same ways, regardless of the deferral mechanism, in that
hostif_sme_enqueue() does unserialized enqueues updating sme_i.qtail.

Also get rid of the bogus (power save) tasklet enabling, as it
is never disabled to begin with.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-5-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

The completion_bh tasklet will now run in process context and have
further concurrency (tasklets being serialized among themselves),
but this is done holding the ctlxq.lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-4-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

The reaper_bh tasklet will now run in process context and have further
concurrency (tasklets being serialized among themselves), but this
is done holding the ctlxq.lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-3-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so. A more suitable equivalent
is to converted to threaded irq instead and service channels in
regular task context.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-2-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove do-while(0) and CamelCase macro PCAvDelayByIO as
it is not accepted by checkpatch.pl
As the macro is just used once with a constant <= 50 the
functionality of the macro is implemented by using
udelay() directly.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e8267e7566d389f318a72d911083e52b02e37210.1649706687.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch warnings of precedence issues. Added parentheses
around macro arguments 'offset' and 'word_en'.
Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com>
Link: https://lore.kernel.org/r/20220412071456.40980-1-aliyarahmani786@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
efuse_read_phymap_from_txpktbuf.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-10-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
iol_execute.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-9-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
LPS_RF_ON_check.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-8-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LPS_RF_ON_check is used only in rtw_pwrctrl.c. Make it a static function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-7-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
rtw_check_join_candidate.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-6-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
rtl8188e_firmware_download.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-5-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Summarize the two if statements at the end of send_beacon.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-4-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the rtw_get_passing_time_ms call in send_beacon.

Calling rtw_get_passing_time_ms makes no sense if we discard the result.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-3-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The else branch at the end of send_beacon is not necessary. We return in
the if branch.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-2-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit f9a8ee8c ("pwm: Always allocate PWM chip base ID
dynamically") the value held in base isn't used any more in the PWM
framework. All PMWs get assigned a dynamic ID, so the assignment is
redundant and can be dropped.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220411113010.208500-1-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the HW_VAR_H2C_FW_PWRMODE case from SetHwReg8188EU() and move
its functionality to a new function in rtw_pwrctrl.c. This is part of
the ongoing effort to get rid of the unwanted hal layer.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220409120627.10633-5-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the HW_VAR_FIFO_CLEARN_UP case from SetHwReg8188EU() and move
its functionality to a new static function in os_intfs.c. This is part
of the ongoing effort to get rid of the unwanted hal layer.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220409120627.10633-4-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the HW_VAR_MLME_JOIN case from SetHwReg8188EU() and move its
functionality to a new static function in rtw_mlme_ext.c. This is part
of the ongoing effort to get rid of the unwanted hal layer.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220409120627.10633-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the HW_VAR_INITIAL_GAIN case from SetHwReg8188EU() and move its
functionality to a new static function in rtw_mlme_ext.c. This is part
of the ongoing effort to get rid of the unwanted hal layer.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220409120627.10633-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The else if in this block is redundant, it can be a simple else.

if (x) {
  ...
} else if (!x) {
  ...
}

Convert two such else if statements to simple else in rw_led.c.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220408163825.29069-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The check for if rtw_skb_alloc() fails is done twice and is written
in a confusing way.  Move the "if (!recvbuf->pskb)" right after
the allocation.  The "if (recvbuf->pskb)" check can now be deleted
and the code pulled in one tab.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Link: https://lore.kernel.org/r/20220408144442.17611-1-hanyihao@vivo.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the staging fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull serial driver fix from Greg KH:
 "This is a single serial driver fix for a build issue that showed up
  due to changes that came in through the tty tree in 5.18-rc1 that were
  missed previously. It resolves a build error with the mpc52xx_uart
  driver.

  It has been in linux-next this week with no reported problems"

* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.