Move the bounds check in adjust_ptr_min_max_vals() into a small helper named
sanitize_check_bounds() in order to simplify the former a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Consolidate all error handling and provide more user-friendly error messages
from sanitize_ptr_alu() and sanitize_val_alu().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Small refactor with no semantic changes in order to consolidate the max
ptr_limit boundary check.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceed
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks.

Fixes: 2c78ee89 ("bpf: Implement CAP_BPF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Wait until after the UMEM is checked for null to dereference it.

Fixes: 43f1bc1e ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com

Reproduce:

  modprobe sch_teql
  tc qdisc add dev teql0 root teql0

This leads to (for instance in Centos 7 VM) OOPS:

[  532.366633] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[  532.366733] IP: [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[  532.366825] PGD 80000001376d5067 PUD 137e37067 PMD 0
[  532.366906] Oops: 0000 [#1] SMP
[  532.366987] Modules linked in: sch_teql ...
[  532.367945] CPU: 1 PID: 3026 Comm: tc Kdump: loaded Tainted: G               ------------ T 3.10.0-1062.7.1.el7.x86_64 #1
[  532.368041] Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.2 04/01/2014
[  532.368125] task: ffff8b7d37d31070 ti: ffff8b7c9fdbc000 task.ti: ffff8b7c9fdbc000
[  532.368224] RIP: 0010:[<ffffffffc06124a8>]  [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[  532.368320] RSP: 0018:ffff8b7c9fdbf8e0  EFLAGS: 00010286
[  532.368394] RAX: ffffffffc0612490 RBX: ffff8b7cb1565e00 RCX: ffff8b7d35ba2000
[  532.368476] RDX: ffff8b7d35ba2000 RSI: 0000000000000000 RDI: ffff8b7cb1565e00
[  532.368557] RBP: ffff8b7c9fdbf8f8 R08: ffff8b7d3fd1f140 R09: ffff8b7d3b001600
[  532.368638] R10: ffff8b7d3b001600 R11: ffffffff84c7d65b R12: 00000000ffffffd8
[  532.368719] R13: 0000000000008000 R14: ffff8b7d35ba2000 R15: ffff8b7c9fdbf9a8
[  532.368800] FS:  00007f6a4e872740(0000) GS:ffff8b7d3fd00000(0000) knlGS:0000000000000000
[  532.368885] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  532.368961] CR2: 00000000000000a8 CR3: 00000001396ee000 CR4: 00000000000206e0
[  532.369046] Call Trace:
[  532.369159]  [<ffffffff84c8192e>] qdisc_create+0x36e/0x450
[  532.369268]  [<ffffffff846a9b49>] ? ns_capable+0x29/0x50
[  532.369366]  [<ffffffff849afde2>] ? nla_parse+0x32/0x120
[  532.369442]  [<ffffffff84c81b4c>] tc_modify_qdisc+0x13c/0x610
[  532.371508]  [<ffffffff84c693e7>] rtnetlink_rcv_msg+0xa7/0x260
[  532.372668]  [<ffffffff84907b65>] ? sock_has_perm+0x75/0x90
[  532.373790]  [<ffffffff84c69340>] ? rtnl_newlink+0x890/0x890
[  532.374914]  [<ffffffff84c8da7b>] netlink_rcv_skb+0xab/0xc0
[  532.376055]  [<ffffffff84c63708>] rtnetlink_rcv+0x28/0x30
[  532.377204]  [<ffffffff84c8d400>] netlink_unicast+0x170/0x210
[  532.378333]  [<ffffffff84c8d7a8>] netlink_sendmsg+0x308/0x420
[  532.379465]  [<ffffffff84c2f3a6>] sock_sendmsg+0xb6/0xf0
[  532.380710]  [<ffffffffc034a56e>] ? __xfs_filemap_fault+0x8e/0x1d0 [xfs]
[  532.381868]  [<ffffffffc034a75c>] ? xfs_filemap_fault+0x2c/0x30 [xfs]
[  532.383037]  [<ffffffff847ec23a>] ? __do_fault.isra.61+0x8a/0x100
[  532.384144]  [<ffffffff84c30269>] ___sys_sendmsg+0x3e9/0x400
[  532.385268]  [<ffffffff847f3fad>] ? handle_mm_fault+0x39d/0x9b0
[  532.386387]  [<ffffffff84d88678>] ? __do_page_fault+0x238/0x500
[  532.387472]  [<ffffffff84c31921>] __sys_sendmsg+0x51/0x90
[  532.388560]  [<ffffffff84c31972>] SyS_sendmsg+0x12/0x20
[  532.389636]  [<ffffffff84d8dede>] system_call_fastpath+0x25/0x2a
[  532.390704]  [<ffffffff84d8de21>] ? system_call_after_swapgs+0xae/0x146
[  532.391753] Code: 00 00 00 00 00 00 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b b7 48 01 00 00 48 89 fb <48> 8b 8e a8 00 00 00 48 85 c9 74 43 48 89 ca eb 0f 0f 1f 80 00
[  532.394036] RIP  [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[  532.395127]  RSP <ffff8b7c9fdbf8e0>
[  532.396179] CR2: 00000000000000a8

Null pointer dereference happens on master->slaves dereference in
teql_destroy() as master is null-pointer.

When qdisc_create() calls teql_qdisc_init() it imediately fails after
check "if (m->dev == dev)" because both devices are teql0, and it does
not set qdisc_priv(sch)->m leaving it zero on error path, then
qdisc_create() imediately calls teql_destroy() which does not expect
zero master pointer and we get OOPS.

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2021-04-08

The following pull-request contains BPF updates for your *net* tree.

We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).

The main changes are:

1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.

2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
   sock map, from John Fastabend.

====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-04-08.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes berg says:

====================
Various small fixes:
 * S1G beacon validation
 * potential leak in nl80211
 * fast-RX confusion with 4-addr mode
 * erroneous WARN_ON that userspace can trigger
 * wrong time units in virt_wifi
 * rfkill userspace API breakage
 * TXQ AC confusing that led to traffic stopped forever
 * connection monitoring time after/before confusion
 * netlink beacon head validation buffer overrun
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.

This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Action initalization fixes

This series fixes reference counting of action instances and modules in
several parts of action init code. The first patch reverts previous fix
that didn't properly account for rollback from a failure in the middle of
the loop in tcf_action_init() which is properly fixed by the following
patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.

Reproduction:

$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
                      action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1

        action order 0: Simple <"2">
         index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple             20480  -1

Fix the issue by modifying module reference counting handling in action
initialization code:

- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.

- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.

- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.

Fixes: d349f997 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Action init code increments reference counter when it changes an action.
This is the desired behavior for cls API which needs to obtain action
reference for every classifier that points to action. However, act API just
needs to change the action and releases the reference before returning.
This sequence breaks when the requested action doesn't exist, which causes
act API init code to create new action with specified index, but action is
still released before returning and is deleted (unless it was referenced
concurrently by cls API).

Reproduction:

$ sudo tc actions ls action gact
$ sudo tc actions change action gact drop index 1
$ sudo tc actions ls action gact

Extend tcf_action_init() to accept 'init_res' array and initialize it with
action->ops->init() result. In tcf_action_add() remove pointers to created
actions from actions array before passing it to tcf_action_put_many().

Fixes: cae422f3 ("net: sched: use reference counting action init")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 6855e821.

Following commit in series fixes the issue without introducing regression
in error rollback of tcf_action_destroy().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the beacon head attribute (NL80211_ATTR_BEACON_HEAD)
is too short to even contain the frame control field,
we access uninitialized data beyond the buffer. Fix this
by checking the minimal required size first. We used to
do this until S1G support was added, where the fixed
data portion has a different size.

Reported-and-tested-by: syzbot+72b99dcf4607e8c770f3@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 1d47f119 ("nl80211: correctly validate S1G beacon head")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210408154518.d9b06d39b4ee.Iff908997b2a4067e8d456b3cb96cab9771d252b8@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The branch displacement logic in the BPF JIT compilers for x86 assumes
that, for any generated branch instruction, the distance cannot
increase between optimization passes.

But this assumption can be violated due to how the distances are
computed. Specifically, whenever a backward branch is processed in
do_jit(), the distance is computed by subtracting the positions in the
machine code from different optimization passes. This is because part
of addrs[] is already updated for the current optimization pass, before
the branch instruction is visited.

And so the optimizer can expand blocks of machine code in some cases.

This can confuse the optimizer logic, where it assumes that a fixed
point has been reached for all machine code blocks once the total
program size stops changing. And then the JIT compiler can output
abnormal machine code containing incorrect branch displacements.

To mitigate this issue, we assert that a fixed point is reached while
populating the output image. This rejects any problematic programs.
The issue affects both x86-32 and x86-64. We mitigate separately to
ease backporting.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The branch displacement logic in the BPF JIT compilers for x86 assumes
that, for any generated branch instruction, the distance cannot
increase between optimization passes.

But this assumption can be violated due to how the distances are
computed. Specifically, whenever a backward branch is processed in
do_jit(), the distance is computed by subtracting the positions in the
machine code from different optimization passes. This is because part
of addrs[] is already updated for the current optimization pass, before
the branch instruction is visited.

And so the optimizer can expand blocks of machine code in some cases.

This can confuse the optimizer logic, where it assumes that a fixed
point has been reached for all machine code blocks once the total
program size stops changing. And then the JIT compiler can output
abnormal machine code containing incorrect branch displacements.

To mitigate this issue, we assert that a fixed point is reached while
populating the output image. This rejects any problematic programs.
The issue affects both x86-32 and x86-64. We mitigate separately to
ease backporting.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In case nl80211_parse_unsol_bcast_probe_resp() results in an
error, need to "goto out" instead of just returning to free
possibly allocated data.

Fixes: 7443dcd1 ("nl80211: Unsolicited broadcast probe response support")
Link: https://lore.kernel.org/r/20210408142833.d8bc2e2e454a.If290b1ba85789726a671ff0b237726d4851b5b0f@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

We need to check the length of this element so that we don't
access data beyond its end. Fix that.

Fixes: 9eaffe50 ("cfg80211: convert S1G beacon to scan results")
Link: https://lore.kernel.org/r/20210408142826.f6f4525012de.I9fdeff0afdc683a6024e5ea49d2daa3cd2459d11@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211_inform_bss expects to receive a TSF value, but is given the
time since boot in nanoseconds. TSF values are expected to be at
microsecond scale rather than nanosecond scale.
Signed-off-by: A. Cody Schuffelen <schuffelen@google.com>
Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple
send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which
should be anticipated and handled by the wireless driver. Remove this WARN_ON()
to prevent kernel panic if kernel is configured to "panic_on_warn".

Bug reported by syzbot.

Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The incorrect timeout check caused probing to happen when it did
not need to happen.  This in turn caused tx performance drop
for around 5 seconds in ath10k-ct driver.  Possibly that tx drop
is due to a secondary issue, but fixing the probe to not happen
when traffic is running fixes the symptom.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Fixes: 9abf4e49 ("mac80211: optimize station connection monitor")
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Normally, TXQs have

  txq->tid = tid;
  txq->ac = ieee80211_ac_from_tid(tid);

However, the special management TXQ actually has

  txq->tid = IEEE80211_NUM_TIDS; // 16
  txq->ac = IEEE80211_AC_VO;

This makes sense, but ieee80211_ac_from_tid(16) is the same
as ieee80211_ac_from_tid(0) which is just IEEE80211_AC_BE.

Now, normally this is fine. However, if the netdev queues
were stopped, then the code in ieee80211_tx_dequeue() will
propagate the stop from the interface (vif->txqs_stopped[])
if the AC 2 (ieee80211_ac_from_tid(txq->tid)) is marked as
stopped. On wake, however, __ieee80211_wake_txqs() will wake
the TXQ if AC 0 (txq->ac) is woken up.

If a driver stops all queues with ieee80211_stop_tx_queues()
and then wakes them again with ieee80211_wake_tx_queues(),
the ieee80211_wake_txqs() tasklet will run to resync queue
and TXQ state. If all queues were woken, then what'll happen
is that _ieee80211_wake_txqs() will run in order of HW queues
0-3, typically (and certainly for iwlwifi) corresponding to
ACs 0-3, so it'll call __ieee80211_wake_txqs() for each AC in
order 0-3.

When __ieee80211_wake_txqs() is called for AC 0 (VO) that'll
wake up the management TXQ (remember its tid is 16), and the
driver's wake_tx_queue() will be called. That tries to get a
frame, which will immediately *stop* the TXQ again, because
now we check against AC 2, and AC 2 hasn't yet been marked as
woken up again in sdata->vif.txqs_stopped[] since we're only
in the __ieee80211_wake_txqs() call for AC 0.

Thus, the management TXQ will never be started again.

Fix this by checking txq->ac directly instead of calculating
the AC as ieee80211_ac_from_tid(txq->tid).

Fixes: adf8ed01 ("mac80211: add an optional TXQ for other PS-buffered frames")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210323210500.bf4d50afea4a.I136ffde910486301f8818f5442e3c9bf8670a9c4@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Recompiling with the new extended version of struct rfkill_event
broke systemd in *two* ways:
 - It used "sizeof(struct rfkill_event)" to read the event, but
   then complained if it actually got something != 8, this broke
   it on new kernels (that include the updated API);
 - It used sizeof(struct rfkill_event) to write a command, but
   didn't implement the intended expansion protocol where the
   kernel returns only how many bytes it accepted, and errored
   out due to the unexpected smaller size on kernels that didn't
   include the updated API.

Even though systemd has now been fixed, that fix may not be always
deployed, and other applications could potentially have similar
issues.

As such, in the interest of avoiding regressions, revert the
default API "struct rfkill_event" back to the original size.

Instead, add a new "struct rfkill_event_ext" that extends it by
the new field, and even more clearly document that applications
should be prepared for extensions in two ways:
 * write might only accept fewer bytes on older kernels, and
   will return how many to let userspace know which data may
   have been ignored;
 * read might return anything between 8 (the original size) and
   whatever size the application sized its buffer at, indicating
   how much event data was supported by the kernel.

Perhaps that will help avoid such issues in the future and we
won't have to come up with another version of the struct if we
ever need to extend it again.

Applications that want to take advantage of the new field will
have to be modified to use struct rfkill_event_ext instead now,
which comes with the danger of them having already been updated
to use it from 'struct rfkill_event', but I found no evidence
of that, and it's still relatively new.

Cc: stable@vger.kernel.org # 5.11
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64)
Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In some race conditions, with more clients and traffic configuration,
below crash is seen when making the interface down. sta->fast_rx wasn't
cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is
due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev)
which has been deleted already.

Resolve this by clearing sta->fast_rx pointer when STA removes
from a 4-addr VLAN.

[  239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[  239.449531] pgd = 80204000
...
[  239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227
[  239.481591] Hardware name: Generic DT based system
[  239.487665] task: be05b700 ti: be08e000 task.ti: be08e000
[  239.492360] PC is at get_rps_cpu+0x2d4/0x31c
[  239.497823] LR is at 0xbe08fc54
...
[  239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac)
[  239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4)
[  239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211])
[  239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8
            0211])
[  239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k])
[  239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k])
[  239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb]
            )
[  239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c)
[  239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228)
[  239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108)
[  239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4)
[  239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94)
[  239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74)
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Multiple ttys try to claim the same the minor number causing a double
unregistration of the same device. The first unregistration succeeds
but the next one results in a null-ptr-deref.

The get_free_serial_index() function returns an available minor number
but doesn't assign it immediately. The assignment is done by the caller
later. But before this assignment, calls to get_free_serial_index()
would return the same minor number.

Fix this by modifying get_free_serial_index to assign the minor number
immediately after one is found to be and rename it to obtain_minor()
to better reflect what it does. Similary, rename set_serial_by_index()
to release_minor() and modify it to free up the minor number of the
given hso_serial. Every obtain_minor() should have corresponding
release_minor() call.

Fixes: 72dc1c09 ("HSO: add option hso driver")
Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com
Tested-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ieee802154-for-davem-2021-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2021-04-07

An update from ieee802154 for your *net* tree.

Most of these are coming from the flood of syzkaller reports
lately got for the ieee802154 subsystem. There are likely to
come more for this, but this is a good batch to get out for now.

Alexander Aring created a patchset to avoid llsec handling on a
monitor interface, which we do not support.
Alex Shi removed a unused macro.
Pavel Skripkin fixed another protection fault found by syzkaller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2021-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.12

Third, and last, set of fixes for v5.12. Small fixes, iwlwifi having
most of them. brcmfmac regression caused by cfg80211 changes is the
most important here.

iwlwifi

* fix a lockdep warning

* fix regulatory feature detection in certain firmware versions

* new hardware support

* fix lockdep warning

* mvm: fix beacon protection checks

mt76

* mt7921: fix airtime reporting

brcmfmac

* fix a deadlock regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Danielle Ratson says:

====================
Fix link_mode derived params functionality

Currently, link_mode parameter derives 3 other link parameters, speed,
lanes and duplex, and the derived information is sent to user space.

Few bugs were found in that functionality.
First, some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback and cause receiving wrong link mode
information in user space. And also, some drivers can report random
values in the 'link_mode' field and cause general protection fault.

Second, the link parameters are only derived in netlink path so in ioctl
path, we don't any reasonable values.

Third, setting 'speed 10000 lanes 1' fails since the lanes parameter
wasn't set for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT.

Patch #1 solves the first two problems by removing link_mode parameter
and deriving the link parameters in driver instead of ethtool.
Patch #2 solves the third one, by setting the lanes parameter for the
link_mode.

v3:
	* Remove the link_mode parameter in the first patch to solve
	  both two issues from patch#1 and patch#2.
	* Add the second patch to solve the third issue.

v2:
	* Add patch #2.
	* Introduce 'cap_link_mode_supported' instead of adding a
	  validity field to 'ethtool_link_ksettings' struct in patch #1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Lanes field is missing for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode and it causes a failure when trying to set
'speed 10000 lanes 1' on Spectrum-2 machines when autoneg is set to on.

Add the lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode.

Fixes: c8907043 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback, before populating it with actual values.
Such drivers will set the new 'link_mode' field to zero, resulting in
user space receiving wrong link mode information given that zero is a
valid value for the field.

Another problem is that some drivers (notably tun) can report random
values in the 'link_mode' field. This can result in a general protection
fault when the field is used as an index to the 'link_mode_params' array
[1].

This happens because such drivers implement their set_link_ksettings()
callback by simply overwriting their private copy of
'ethtool_link_ksettings' struct with the one they get from the stack,
which is not always properly initialized.

Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings'
and instead have drivers call ethtool_params_from_link_mode() with the
current link mode. The function will derive the link parameters (e.g.,
speed) from the link mode and fill them in the 'ethtool_link_ksettings'
struct.

v3:
	* Remove link_mode parameter and derive the link parameters in
	  the driver instead of passing link_mode parameter to ethtool
	  and derive it there.

v2:
	* Introduce 'cap_link_mode_supported' instead of adding a
	  validity field to 'ethtool_link_ksettings' struct.

[1]
general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967]
CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446
Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03
+38 d0 7c 08 84 d2 0f 85 b9
RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000
RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960
RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f
R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000
R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210
FS:  0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37
 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586
 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656
 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620
 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842
 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c8907043 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2021-04-06

This series provides some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These patches fix a series of spelling errors in net/tipc module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reset MAC header in HSR Tx path. This is needed, because direct packet
transmission, e.g. by specifying PACKET_QDISC_BYPASS does not reset the MAC
header.

This has been observed using the following setup:

|$ ip link add name hsr0 type hsr slave1 lan0 slave2 lan1 supervision 45 version 1
|$ ifconfig hsr0 up
|$ ./test hsr0

The test binary is using mmap'ed sockets and is specifying the
PACKET_QDISC_BYPASS socket option.

This patch resolves the following warning on a non-patched kernel:

|[  112.725394] ------------[ cut here ]------------
|[  112.731418] WARNING: CPU: 1 PID: 257 at net/hsr/hsr_forward.c:560 hsr_forward_skb+0x484/0x568
|[  112.739962] net/hsr/hsr_forward.c:560: Malformed frame (port_src hsr0)

The warning can be safely removed, because the other call sites of
hsr_forward_skb() make sure that the skb is prepared correctly.

Fixes: d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: kdoc fixes

Number of kdoc fixes to ethtool headers. All comment changes.

With all the patches posted kdoc script seems happy:
$ ./scripts/kernel-doc -none include/uapi/linux/ethtool.h include/linux/ethtool.h
$

Note that some of the changes are in -next, e.g. the FEC
documentation update so full effect will be seen after
trees converge.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix remaining issues with kdoc in the ethtool headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a note on expected handling of reserved fields,
and references to all kdocs. This fixes a bunch
of kdoc warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extended link state structures and enums use kdoc headers
but then do not describe any of the members.

Convert to normal comments.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
is freed and later under spinlock, causing potential use-after-free.
Set the free pointer to NULL to avoid undefined behavior.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>