- 12 May, 2015 22 commits
-
-
Christoph Hellwig authored
commit 118c855b upstream. The 3w-9xxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoph Hellwig authored
commit 9cd95546 upstream. The 3w-xxxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
-
Christoph Hellwig authored
commit 579d69bc upstream. The 3w-sas driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Torsten Luettgert <ml-lkml@enda.eu> Tested-by:
Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de> Acked-by:
-
Mike Christie authored
commit 35e9a9f9 upstream. This works around a issue with qnap iscsi targets not handling large IOs very well. The target returns: VPD INQUIRY: Block limits page (SBC) Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 4294967295 blocks Optimal transfer length: 4294967295 blocks Maximum prefetch, xdread, xdwrite transfer length: 0 blocks Maximum unmap LBA count: 8388607 Maximum unmap block descriptor count: 1 Optimal unmap granularity: 16383 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0xffffffff blocks Maximum atomic transfer length: 0 Atomic alignment: 0 Atomic transfer length granularity: 0 and it is *sometimes* able to handle at least one IO of size up to 8 MB. We have seen in traces where it will sometimes work, but other times it looks like it fails and it looks like it returns failures if we send multiple large IOs sometimes. Also it looks like it can return 2 different errors. It will sometimes send iscsi reject errors indicating out of resources or it will send invalid cdb illegal requests check conditions. And then when it sends iscsi rejects it does not seem to handle retries when there are command sequence holes, so I could not just add code to try and gracefully handle that error code. The problem is that we do not have a good contact for the company, so we are not able to determine under what conditions it returns which error and why it sometimes works. So, this patch just adds a new black list flag to set targets like this to the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19 caused this regression, so I also ccing stable. Reported-by:
Christian Hesse <list@eworm.de> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
-
Alex Deucher authored
commit cd17e02f upstream. Seems to have problems with high mclks. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Takashi Iwai authored
commit 07b0e5d4 upstream. The emux-synth driver has a possible AB/BA mutex deadlock at unloading the emu10k1 driver: snd_emux_free() -> snd_emux_detach_seq(): mutex_lock(&emu->register_mutex) -> snd_seq_delete_kernel_client() -> snd_seq_free_client(): mutex_lock(®ister_mutex) snd_seq_release() -> snd_seq_free_client(): mutex_lock(®ister_mutex) -> snd_seq_delete_all_ports() -> snd_emux_unuse(): mutex_lock(&emu->register_mutex) Basically snd_emux_detach_seq() doesn't need a protection of emu->register_mutex as it's already being unregistered. So, we can get rid of this for avoiding the deadlock. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit d0226082 upstream. Some models provide too long string for the shortname that has 32bytes including the terminator, and it results in a non-terminated string exposed to the user-space. This isn't too critical, though, as the string is stopped at the succeeding longname string. This patch fixes such entries by dropping "SB" prefix (it's enough to fit within 32 bytes, so far). Meanwhile, it also changes strcpy() with strlcpy() to make sure that this kind of problem won't happen in future, too. Signed-off-by:
-
Marek Szyprowski authored
commit 6829e274 upstream. Buffers allocated by dma_alloc_coherent() are always zeroed on Alpha, ARM (32bit), MIPS, PowerPC, x86/x86_64 and probably other architectures. It turned out that some drivers rely on this 'feature'. Allocated buffer might be also exposed to userspace with dma_mmap() call, so clearing it is desired from security point of view to avoid exposing random memory to userspace. This patch unifies dma_alloc_coherent() behavior on ARM64 architecture with other implementations by unconditionally zeroing allocated buffer. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> [ luis: backported to 3.16: - dropped changes to __alloc_from_pool() which doesn't exist in 3.16 ] Signed-off-by:
-
Takashi Iwai authored
commit 7290006d upstream. This patch adds the missing flag to enable "Mute-LED Mode" mixer enum ctl for Thinkpads that have also the software mute-LED control. Reported-and-tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit ee52e56e upstream. The mute-LED mode control has the fixed on/off states that are supposed to remain on/off regardless of the master switch. However, this doesn't work actually because the vmaster hook is called in the vmaster code itself. This patch fixes it by calling the hook indirectly after checking the mute LED mode. Reported-and-tested-by:
-
Omar Sandoval authored
commit 909e26dc upstream. Whenever the check for a send in progress introduced in commit 521e0546 (btrfs: protect snapshots from deleting during send) is hit, we return without unlocking inode->i_mutex. This is easy to see with lockdep enabled: [ +0.000059] ================================================ [ +0.000028] [ BUG: lock held when returning to user space! ] [ +0.000029] 4.0.0-rc5-00096-g3c435c1e #93 Not tainted [ +0.000026] ------------------------------------------------ [ +0.000029] btrfs/211 is leaving the kernel with locks still held! [ +0.000029] 1 lock held by btrfs/211: [ +0.000023] #0: (&type->i_mutex_dir_key){+.+.+.}, at: [<ffffffff8135b8df>] btrfs_ioctl_snap_destroy+0x2df/0x7a0 Make sure we unlock it in the error path. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Bard Liao authored
commit 74d6ea52 upstream. The PLL output will be unstable in some cases. We can fix it by setting some registers. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Charles Keepax authored
commit a2d97723 upstream. Correct small copy and paste error where autodisable was not being enabled for the SOC_DAPM_SINGLE_TLV_AUTODISABLE control. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Eric W. Biederman authored
commit cd4a4017 upstream. The only users of collect_mounts are in audit_tree.c In audit_trim_trees and audit_add_tree_rule the path passed into collect_mounts is generated from kern_path passed an audit_tree pathname which is guaranteed to be an absolute path. In those cases collect_mounts is obviously intended to work on mounted paths and if a race results in paths that are unmounted when collect_mounts it is reasonable to fail early. The paths passed into audit_tag_tree don't have the absolute path check. But are used to play with fsnotify and otherwise interact with the audit_trees, so again operating only on mounted paths appears reasonable. Avoid having to worry about what happens when we try and audit unmounted filesystems by restricting collect_mounts to mounts that appear in the mount tree. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
hujianyang authored
commit 9aa272b4 upstream. Running mtd-utils/tests/ubi-tests/io_basic.c could cause soft lockup or watchdog reset. It is because *updatevol* will perform ubi_check_volume() after updating finish and this function will full scan the updated lebs if the volume is initialized as STATIC_VOLUME. This patch adds *cond_resched()* in the loop of lebs scan to avoid soft lockup. Helped by Richard Weinberger <richard@nod.at> [ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1} (t=2101 jiffies g=1606 c=1605 q=56) [ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G O 3.10.53 #21 [ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14) [ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) [ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64) [ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60) [ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74) [ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8) [ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) [ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) [ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) [ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30) [ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c) [ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60) [ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50) [ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0) [ 2158.173092] 3c80: c4043ce4 00000019 [ 2158.173102] 3ca0: 1f8a865f c050ad10 1f8a864c 00000031 c04b5970 0003ebce 00000000 f3550000 [ 2158.173113] 3cc0: bf00bc68 00000800 0003ebce c4043ce0 c0186d14 c0186cb8 80000013 ffffffff [ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38) [ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f) [ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073] [ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash] Signed-off-by:
Wang Kai <morgan.wang@huawei.com> Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vineet Gupta authored
commit e4140819 upstream. A malicious signal handler / restorer can DOS the system by fudging the user regs saved on stack, causing weird things such as sigreturn returning to user mode PC but cpu state still being kernel mode.... Ensure that in sigreturn path status32 always has U bit; any other bogosity (gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms. Reproducer signal handler: void handle_sig(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); regs->scratch.status32 = 0; } Before the fix, kernel would go off to weeds like below: --------->8----------- [ARCLinux]$ ./signal-test Path: /signal-test CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65 task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000 [ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698 [EFA ]: 0x00000010 [BLINK ]: 0x2007c1ee [ERET ]: 0x10698 [STAT32]: 0x00000000 : <-------- BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000 LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000 ... --------->8----------- Reported-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [ luis: backported to 3.16: used Vineet's backport to 3.14 ] Signed-off-by:
-
Matt Fleming authored
commit 44be28e9 upstream. It appears that the BayTrail-T class of hardware requires EFI in order to powerdown and reboot and no other reliable method exists. This quirk is generally applicable to all hardware that has the ACPI Hardware Reduced bit set, since usually ACPI would be the preferred method. Cc: Len Brown <len.brown@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> [ luis: backported to 3.16: - move changes from quirks.c into efi.c - adjusted context ] Signed-off-by:
-
Matt Fleming authored
commit 0c5ed61a upstream. Not only can EfiResetSystem() be used to reboot, it can also be used to power down machines. By and large, this functionality doesn't work very well across the range of EFI machines in the wild, so it should definitely only be used as a last resort. In an ideal world, this wouldn't be needed at all. Unfortunately, we're starting to see machines where EFI is the *only* reliable way to power down, and nothing else, not PCI, not ACPI, works. efi_poweroff_required() should be implemented on a per-architecture basis, since exactly when we should be using EFI runtime services is a platform-specific decision. There's no analogue for reboot because each architecture handles reboot very differently - the x86 code in particular is pretty complex. Patches to enable this for specific classes of hardware will be submitted separately. Tested-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
-
Matt Fleming authored
commit 8562c99c upstream. Implement efi_reboot(), which is really just a wrapper around the EfiResetSystem() EFI runtime service, but it does at least allow us to funnel all callers through a single location. It also simplifies the callsites since users no longer need to check to see whether EFI_RUNTIME_SERVICES are enabled. Cc: Tony Luck <tony.luck@intel.com> Tested-by:
-
Ido Shamay authored
commit 07841f9d upstream. When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Benjamin Poirier authored
commit 42eab005 upstream. By default, the number of tx queues is limited by the number of online cpus in mlx4_en_get_profile(). However, this limit no longer holds after the ethtool .set_channels method has been called. In that situation, the driver may access invalid bits of certain cpumask variables when queue_index >= nr_cpu_ids. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Acked-by:
-
Luis Henriques authored
Signed-off-by:
-
- 06 May, 2015 18 commits
-
-
David S. Miller authored
commit a134f083 upstream. If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Wen Xu <hotdog3645@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 0f2af21a upstream. Currently there is a bug in zero range code which causes zero range calls to only allocate block aligned portion of the range, while ignoring the rest in some cases. In some cases, namely if the end of the range is past i_size, we do attempt to preallocate the last nonaligned block. However this might cause kernel to BUG() in some carefully designed zero range requests on setups where page size > block size. Fix this problem by first preallocating the entire range, including the nonaligned edges and converting the written extents to unwritten in the next step. This approach will also give us the advantage of having the range to be as linearly contiguous as possible. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
-
Theodore Ts'o authored
commit 713e8dde upstream. We accidently aliased EXT4_EX_NOCACHE and EXT4_GET_CONVERT_UNWRITTEN falgs, which apparently was hiding a bug that was unmasked when this flag aliasing issue was addressed (see the subsequent commit). The reproduction case was: fsx -N 10000 -l 500000 -r 4096 -t 4096 -w 4096 -Z -R -W /vdb/junk ... which would cause fsx to report corruption in the data file. The fix we have is a bit of an overkill, but I'd much rather be conservative for now, and we can optimize ZERO_RANGE_FL handling later. The fact that we need to zap the extent_status cache for the inode is unfortunate, but correctness is far more important than performance. Signed-off-by:
-
Theodore Ts'o authored
commit bd30d702 upstream. Commit b8a86845 introduced an accidental flag aliasing between EXT4_EX_NOCACHE and EXT4_GET_BLOCKS_CONVERT_UNWRITTEN. Fortunately, this didn't introduce any untorward side effects --- we got lucky. Nevertheless, fix this and leave a warning to hopefully avoid this from happening in the future. Signed-off-by:
-
Rainer Koenig authored
commit 47c1ffb2 upstream. Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by:
Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ulrik De Bie authored
commit 0dc15879 upstream. The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by:
Stefan Valouch <stefan@valouch.com> Tested-by:
Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
NeilBrown authored
commit c42bfd7f upstream. This button is treated as a wakeup source, so we need to initialise it correctly. Without the device_init_wakeup() call, dev->power.wakeup will be NULL, and pm_wakeup_event() will do nothing. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Ethan Zhao authored
commit cb57720b upstream. If ACPI _PPC changed notification happens before governor was initiated while kernel is booting, a NULL pointer dereference will be triggered: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 PGD 0 Oops: 0000 [#1] SMP ... ... RIP: 0010:[<ffffffff81470453>] [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 RSP: 0018:ffff881fcfbcfbb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff881fd11b3980 RCX: ffff88407fc20000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff881fd11b3980 RBP: ffff881fcfbcfbd8 R08: 0000000000000000 R09: 000000000000000f R10: ffffffff818068d0 R11: 0000000000000043 R12: 0000000000000004 R13: 0000000000000000 R14: ffffffff8196cae0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff881fffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000000018ae000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:3 (pid: 750, threadinfo ffff881fcfbce000, task ffff881fcf556400) Stack: ffff881fffc17d00 ffff881fcfbcfc18 ffff881fd11b3980 0000000000000000 ffff881fcfbcfc08 ffffffff81470d08 ffff881fd11b3980 0000000000000007 ffff881fcfbcfc18 ffff881fffc17d00 ffff881fcfbcfd28 ffffffff81472e9a Call Trace: [<ffffffff81470d08>] __cpufreq_set_policy+0x1b8/0x2e0 [<ffffffff81472e9a>] cpufreq_update_policy+0xca/0x150 [<ffffffff81472f20>] ? cpufreq_update_policy+0x150/0x150 [<ffffffff81324a96>] acpi_processor_ppc_has_changed+0x71/0x7b [<ffffffff81320bcd>] acpi_processor_notify+0x55/0x115 [<ffffffff812f9c29>] acpi_device_notify+0x19/0x1b [<ffffffff813084ca>] acpi_ev_notify_dispatch+0x41/0x5f [<ffffffff812f64a4>] acpi_os_execute_deferred+0x27/0x34 The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver were initiated, but cpufreq_governor wasn't and _PPC changed notification happened, __cpufreq_governor() was called within acpi_os_execute_deferred kernel thread context. To fix this panic issue, add pointer checking code in __cpufreq_governor() before pointer policy->governor is to be dereferenced. Signed-off-by:
Ethan Zhao <ethan.zhao@oracle.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Thomas D authored
commit f82263c6 upstream. Since commit ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") turbostat's Makefile is using [...] BUILD_OUTPUT := $(PWD) [...] which obviously causes trouble when building "turbostat" with make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat because GNU make does not update nor guarantee that $PWD is set. This patch changes the Makefile to use $CURDIR instead, which GNU make guarantees to set and update (i.e. when using "make -C ...") and also adds support for the O= option (see "make help" in your root of your kernel source tree for more details). Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 13f6b191 upstream. Using the indenting we can see the curly braces were obviously intended. This is a static checker fix, but my guess is that we don't read enough bytes, because we don't calculate "t_len" correctly. Fixes: f1d82698 ('memstick: use fully asynchronous request processing') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Nicolas Iooss authored
commit d43698e8 upstream. Commit 2473238e ("ihex: add support for CS:IP/EIP records") removes the "default:" statement in the switch block, making the "return usage();" line dead code and ihex2fw silently ignoring unknown options. Restore this statement. This bug was found by building with HOSTCC=clang and adding -Wunreachable-code-return to HOSTCFLAGS. Fixes: 2473238e ("ihex: add support for CS:IP/EIP records") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Herbert Xu authored
commit 213dd74a upstream. On Wed, Apr 15, 2015 at 05:41:26PM +0200, Nicolas Dichtel wrote: > Le 15/04/2015 15:57, Herbert Xu a écrit : > >On Wed, Apr 15, 2015 at 06:22:29PM +0800, Herbert Xu wrote: > [snip] > >Subject: skbuff: Do not scrub skb mark within the same name space > > > >The commit ea23192e ("tunnels: > Maybe add a Fixes tag? > Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") > > >harmonize cleanup done on skb on rx path") broke anyone trying to > >use netfilter marking across IPv4 tunnels. While most of the > >fields that are cleared by skb_scrub_packet don't matter, the > >netfilter mark must be preserved. > > > >This patch rearranges skb_scurb_packet to preserve the mark field. > nit: s/scurb/scrub > > Else it's fine for me. Sure. PS I used the wrong email for James the first time around. So let me repeat the question here. Should secmark be preserved or cleared across tunnels within the same name space? In fact, do our security models even support name spaces? ---8<--- The commit ea23192e ("tunnels: harmonize cleanup done on skb on rx path") broke anyone trying to use netfilter marking across IPv4 tunnels. While most of the fields that are cleared by skb_scrub_packet don't matter, the netfilter mark must be preserved. This patch rearranges skb_scrub_packet to preserve the mark field. Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Honggang LI authored
commit 59d2d18c upstream. If CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for x86 systems and physical memory is more than 4GB, dma_map_page may return a valid memory address which greater than 0xffffffff. As a result, the mlx5 device page allocator RB tree will be initialized with valid addresses greater than 0xfffffff. However, (addr & PAGE_MASK) set the high four bytes to zeros. So, it's impossible for the function, free_4k, to release the pages whose addresses greater than 4GB. Memory leaks. And mlx5_ib module can't release the pages when user try to remove the module, as a result, system hang. [root@rdma05 root]# dmesg | grep addr | head addr = 3fe384000 addr & PAGE_MASK = fe384000 [root@rdma05 root]# rmmod mlx5_ib <---- hang on ---------------------- cosnole log ----------------- mlx5_ib 0000:04:00.0: irq 138 for MSI/MSI-X alloc irq_desc for 139 on node -1 alloc kstat_irqs on node -1 mlx5_ib 0000:04:00.0: irq 139 for MSI/MSI-X 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found ---------------------- cosnole log ----------------- Fixes: bf0bf77f ('mlx5: Support communicating arbitrary host page size to firmware') Signed-off-by:
Honggang Li <honli@redhat.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Sagi Grimberg authored
commit a065fe6a upstream. This length miss-calculation may cause a silent data corruption in the DIX case and cause the device to reference unmapped area. Fixes: d77e6535 ('libiscsi, iser: Adjust data_length to include protection information') Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
commit ca9b590c upstream. The current code decreases from the mss size (which is the gso_size from the kernel skb) the size of the packet headers. It shouldn't do that because the mss that comes from the stack (e.g IPoIB) includes only the tcp payload without the headers. The result is indication to the HW that each packet that the HW sends is smaller than what it could be, and too many packets will be sent for big messages. An easy way to demonstrate one more aspect of the problem is by configuring the ipoib mtu to be less than 2*hlen (2*56) and then run app sending big TCP messages. This will tell the HW to send packets with giant (negative value which under unsigned arithmetics becomes a huge positive one) length and the QP moves to SQE state. Fixes: b832be1e ('IB/mlx4: Add IPoIB LSO support') Reported-by:
Matthew Finlay <matt@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Mark Brown authored
commit c1c21f4e upstream. Current -next fails to link an ARM allmodconfig because drivers that use the core recovery functions can be built as modules but those functions are not exported: ERROR: "i2c_generic_gpio_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_generic_scl_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_recover_bus" [drivers/i2c/busses/i2c-davinci.ko] undefined! Add exports to fix this. Fixes: 5f9296ba (i2c: Add bus recovery infrastructure) Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Dave Olson authored
commit f7e9e358 upstream. This problem appears to have been introduced in 2.6.29 by commit 93197a36 "Rewrite sysfs processor cache info code". This caused lscpu to error out on at least e500v2 devices, eg: error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory Some embedded powerpc systems use cache-size in DTS for the unified L2 cache size, not d-cache-size, so we need to allow for both DTS names. Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle this. Fixes: 93197a36 ("powerpc: Rewrite sysfs processor cache info code") Signed-off-by:
Dave Olson <olson@cumulusnetworks.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Radim Krčmář authored
commit ca3f0874 upstream. kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
