This feels more at home in block-group.c than in extent-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>i
[ refresh ]
Signed-off-by: David Sterba <dsterba@suse.com>

We can now easily migrate this code as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Want to move these functions into block-group.c, so export them.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This can be easily migrated over now.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>

This can easily be moved now.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh ]
Signed-off-by: David Sterba <dsterba@suse.com>

This gets used by a few different logical chunks of the block group
code, export it while we move things around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

All of the prep work has been done so we can now cleanly move this chunk
over.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh, add btrfs_get_alloc_profile export, comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>

This is the removal code and the unused bgs code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh, move clear_incompat_bg_bits ]
Signed-off-by: David Sterba <dsterba@suse.com>

This is used in a few logical parts of the block group code, temporarily
export it so we can move things in pieces.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We can now just copy it over to block-group.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

None of the macros is used outside of sysfs.c.
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

The kobject should be pulled in via sysfs.h and that needs to include it
because it needs various definitions like kobj_attribute or kobject.
Signed-off-by: David Sterba <dsterba@suse.com>

Wrap the fsid renaming code and move it to sysfs.c.
Signed-off-by: David Sterba <dsterba@suse.com>

The helpers to create block group and space info directories already
live in sysfs.c, move the deletion part there too.
Signed-off-by: David Sterba <dsterba@suse.com>

The device uevent belongs to the sysfs API.
Signed-off-by: David Sterba <dsterba@suse.com>

In order to unexport the feature type array, add a helper for the
enum-to-string conversion.
Signed-off-by: David Sterba <dsterba@suse.com>

The last non-sysfs usage of space_info_ktype has been moved to a private
helper in previous patch so the variable can be made static.
Signed-off-by: David Sterba <dsterba@suse.com>

Move creation of data/metadata/system space info directories to sysfs.c.
Signed-off-by: David Sterba <dsterba@suse.com>

The last non-sysfs usage of btrfs_raid_ktype has been moved to a private
helper in previous patch so the variable can be made static.
Signed-off-by: David Sterba <dsterba@suse.com>

The part of link_block_group that just creates the sysfs object is
independent and can be factored out to a helper.
Signed-off-by: David Sterba <dsterba@suse.com>

As the header for sysfs code already exists, use it to clean up ctree.h.
Signed-off-by: David Sterba <dsterba@suse.com>

__btrfs_reset_dev_stats() is a small helper function to reset devices stat
values, and is used only once, instead just open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_dev_stat_reset() is an overdo in terms of wrapping. So this patch
open codes btrfs_dev_stat_reset().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When we try to delete qgroups, we're pretty cautious, we make sure both
qgroups exist and there is a relationship between them, then try to
delete the relation.

This behavior is OK, but the problem is we need to two relation items,
and if we failed the first item deletion, we error out, leaving the
other relation item in qgroup tree.

Sometimes the error from del_qgroup_relation_item() could just be
-ENOENT, thus we can ignore that error and continue without any problem.

Further more, such cautious behavior makes qgroup relation deletion
impossible for orphan relation items.

This patch will enhance __del_qgroup_relation():
- If both qgroups and their relation items exist
  Go the regular deletion routine and update their accounting if needed.

- If any qgroup or relation item doesn't exist
  Then we still try to delete the orphan items anyway, but don't trigger
  the accounting update.

By this, we try our best to remove relation items, and can handle orphan
relation items properly, while still keep the existing behavior for good
qgroup tree.
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In commit c11d2c23 ("Btrfs: add ioctl to get and reset the device
stats") the get_dev_stats ioctl was added.

Shortly thereafter, in commit b27f7c0c ("btrfs: join DEV_STATS
ioctls to one") , the flags field was added.  However, the calculation
for unused padding space was not updated, which also invalidated the
comment.

Clarify what happened to reduce confusion and wasted time for anyone
implementing this.
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If any call to find_first_clear_extent_bit() returns an unexpected result,
the test should fail and not just print an error message, otherwise it
makes detection of regressions much harder to notice.

Fixes: 1eaebb34 ("btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The test creates an extent io tree and sets several ranges with the
CHUNK_ALLOCATED and CHUNK_TRIMMED bits, resulting in the allocation of
several extent state structures. However the test never clears those
ranges, resulting in memory leaks of the extent state structures.

This is detected when CONFIG_BTRFS_DEBUG is set once we remove the
btrfs module (rmmod btrfs):

[57399.787918] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.790155] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.791941] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.793753] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.795188] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.796453] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.797765] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.799049] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.800142] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.801126] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.802106] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.803119] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.804153] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.805196] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.806191] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1

The start and end offsets reported correspond exactly to the ranges
used by the test.

So fix that by clearing all the ranges when the test finishes.

Fixes: 1eaebb34 ("btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Replaced by the sysfs exports that provide a more fine grained interface
for filesystem debugging.
Signed-off-by: David Sterba <dsterba@suse.com>

Add 'debug' directories to global sysfs and per-filesystem. This will
replace the debugfs directory. The sysfs location is simpler and builds
on top of the existing file hierarchy so there will hopefully be no more
questions about the sample debugfs file.

The directory is called 'debug' and only present under
CONFIG_BTRFS_DEBUG so this will not affect productions builds.
Signed-off-by: David Sterba <dsterba@suse.com>

extent-tree.c has a find_next_key that just walks up the path to find
the next key, but it is used for both the caching stuff and the snapshot
delete stuff.  The snapshot deletion stuff is special so it can't really
use btrfs_find_next_key, but the caching thread stuff can.  We just need
to fix btrfs_find_next_key to deal with ->skip_locking and then it works
exactly the same as the private find_next_key helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This is used in caching and reading block groups, so export it while we
move these chunks independently.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Man a lot of people use this stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We'll need this to move the caching stuff around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This will make it so we can move them easily.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ coding style updates ]
Signed-off-by: David Sterba <dsterba@suse.com>

These are relatively straightforward as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Another easy set to move over to block-group.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Move these bits first as they are the easiest to move.  Export two of
the helpers so they can be moved all at once.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor style updates ]
Signed-off-by: David Sterba <dsterba@suse.com>

This is prep work for moving all of the block group cache code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>

This is prep work for moving block_group_cache around.  Having this in
the header file makes the header file include need to be in a certain
order, which is awkward, so just move it into free-space-cache.c and
then we can re-arrange later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>