- 10 Mar, 2021 35 commits
-
-
Kuninori Morimoto authored
This patch cleanups below ppcheck warning. sound/soc/sh/rcar/ssi.c:170:19: style: The scope of the variable 'mod' can be reduced. [variableScope] struct rsnd_mod *mod; ^ sound/soc/sh/rcar/ssi.c:535:6: style: The scope of the variable 'i' can be reduced. [variableScope] int i; ^ sound/soc/sh/rcar/ssi.c:1212:19: style: The scope of the variable 'mod' can be reduced. [variableScope] struct rsnd_mod *mod; ^ sound/soc/sh/rcar/ssi.c:328:16: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour [shiftTooManyBitsSigned] ssi->cr_clk = FORCE | rsnd_rdai_width_to_swl(rdai) | ^ sound/soc/sh/rcar/ssi.c:387:12: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour [shiftTooManyBitsSigned] cr_own |= FORCE | rsnd_rdai_width_to_swl(rdai); ^ Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k0qxro2j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
This patch cleanups below ppcheck warning. sound/soc/sh/rcar/ssiu.c:212:10: style: The scope of the variable 'shift' can be reduced. [variableScope] int i, shift; ^ sound/soc/sh/rcar/ssiu.c:337:19: style: The scope of the variable 'mod' can be reduced. [variableScope] struct rsnd_mod *mod; ^ sound/soc/sh/rcar/ssiu.c:362:22: style: The scope of the variable 'np' can be reduced. [variableScope] struct device_node *np; ^ sound/soc/sh/rcar/ssiu.c:363:19: style: The scope of the variable 'mod' can be reduced. [variableScope] struct rsnd_mod *mod; ^ sound/soc/sh/rcar/ssiu.c:366:6: style: The scope of the variable 'i' can be reduced. [variableScope] int i; ^ sound/soc/sh/rcar/ssiu.c:397:13: style: The scope of the variable 'ret' can be reduced. [variableScope] int i, nr, ret; ^ Signed-off-by: -
Mark Brown authored
Merge series "ASoC: sdm845: array out of bound issues" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: During testing John Stultz and Amit reported few array our bound issues after enabling bound sanitizer This patch series attempts to fix those! changes since v1: - make sure the wcd is not de-referenced without intialization Srinivas Kandagatla (3): ASoC: qcom: sdm845: Fix array out of bounds access ASoC: qcom: sdm845: Fix array out of range on rx slim channels ASoC: codecs: wcd934x: add a sanity check in set channel map sound/soc/codecs/wcd934x.c | 6 ++++++ sound/soc/qcom/sdm845.c | 6 +++--- 2 files changed, 9 insertions(+), 3 deletions(-) -- 2.21.0
-
Pan Xiuli authored
The ADSPCS_SPA is Set Power Active bit. To check if DSP is powered down, we need to check ADSPCS_CPA, the Current Power Active bit. Fixes: 747503b1 ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations") Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210309004127.4940-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Srinivas Kandagatla authored
set channel map can be passed with a channel maps, however if the number of channels that are passed are more than the actual supported channels then we would be accessing array out of bounds. So add a sanity check to validate these numbers! Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-4-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
WCD934x has only 13 RX SLIM ports however we are setting it as 16 in set_channel_map, this will lead to array out of bounds error! Orignally caught by enabling USBAN array out of bounds check: Fixes: 5caf64c6 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga") Reported-by:
-
Srinivas Kandagatla authored
Static analysis Coverity had detected a potential array out-of-bounds write issue due to the fact that MAX AFE port Id was set to 16 instead of using AFE_PORT_MAX macro. Fix this by properly using AFE_PORT_MAX macro. Fixes: 1b93a884 ("ASoC: qcom: sdm845: handle soundwire stream") Reported-by:
-
Mark Brown authored
Merge series "Report jack and button detection + Capture Support" from Lucas Tanure <tanureal@opensource.cirrus.com>: Hi All, Here is a patch series for reporting to user space jack and button events and add the support for Capture. With some cleanups and fixes along the way. Regards, Lucas Tanure Lucas Tanure (12): ASoC: cs42l42: Fix Bitclock polarity inversion ASoC: cs42l42: Fix channel width support ASoC: cs42l42: Fix mixer volume control ASoC: cs42l42: Don't enable/disable regulator at Bias Level ASoC: cs42l42: Always wait at least 3ms after reset ASoC: cs42l42: Remove power if the driver is being removed ASoC: cs42l42: Disable regulators if probe fails ASoC: cs42l42: Provide finer control on playback path ASoC: cs42l42: Set clock source for both ways of stream ASoC: cs42l42: Add Capture Support ASoC: cs42l42: Report jack and button detection ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Richard Fitzgerald (3): ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT ASoC: cs42l42: Only start PLL if it is needed ASoC: cs42l42: Wait for PLL to lock before switching to it sound/soc/codecs/cs42l42.c | 437 +++++++++++++++++++++---------------- sound/soc/codecs/cs42l42.h | 41 +++- 2 files changed, 282 insertions(+), 196 deletions(-) -- 2.30.1
-
Peter Robinson authored
In 61fbeb5d the sirf prima/atlas drivers were removed. This cleans up a stray header and some Kconfig entries for the codec that were missed in the process. Fixes: 61fbeb5d (ASoC: remove sirf prima/atlas drivers) Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210307162338.1160604-1-pbrobinson@gmail.comSigned-off-by:
-
Jonathan Marek authored
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these controls are incorrectly toggling the first bit of the register, which is part of the FS_RATE field. Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX" control, which is to use SND_SOC_NOPM as the register and use an enum in the shift field instead. Fixes: 2c4066e5 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Reviewed-by:
-
Jonathan Marek authored
An interface can have multiple decimators enabled, so loop over all active decimators. Otherwise only one channel will be unmuted, and other channels will be zero. This fixes recording from dual DMIC as a single two channel stream. Also remove the now unused "active_decimator" field. Fixes: 908e6b1d ("ASoC: codecs: lpass-va-macro: Add support to VA Macro") Signed-off-by:
-
Lucas Tanure authored
This delay is part of the power-up sequence defined in the datasheet. A runtime_resume is a power-up so must also include the delay. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.comSigned-off-by:
-
Lucas Tanure authored
dev_pm_ops already enable/disable the codec if not in use Signed-off-by:
-
Lucas Tanure authored
The minimum value is 0x3f (-63dB), which also is mute Signed-off-by:
-
Lucas Tanure authored
Remove the hard coded 32 bits width and replace with the correct width calculated by params_width. Signed-off-by:
-
Lucas Tanure authored
The driver was setting bit clock polarity opposite to intended polarity. Also simplify the code by grouping ADC and DAC clock configurations into a single field. Signed-off-by:
-
Jon Hunter authored
Many systems do not use ACPI and hence do not provide a DMI table. On non-ACPI systems a warning, such as the following, is printed on boot. WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name! The variable 'dmi_available' is not exported and so currently cannot be used by kernel modules without adding an accessor. However, it is possible to use the function is_acpi_device_node() to determine if the sound card is an ACPI device and hence indicate if we expect a DMI table to be present. Therefore, call is_acpi_device_node() to see if we are using ACPI and only parse the DMI table if we are booting with ACPI. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210303115526.419458-1-jonathanh@nvidia.comSigned-off-by:
-
Pierre-Louis Bossart authored
We only unregister the platform device during the .remove operation, but if the probe fails we will never reach this sequence. Suggested-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Fixes: dd96daca ("ASoC: SOF: Intel: Add APL/CNL HW DSP support") Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302003410.1178535-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Mark Brown authored
Hi All, Here is a series of rt5640/rt5651 volume-control fixes which I wrote while working on a bytcr-rt5640 UCM profile patch-series adding hardware-volume control to devices using this UCM profile. The UCM series will also work on older kernels, but it works best on kernels with this series applied, giving e.g. finer grained volume control and support for hardware muting the outputs. Regards, Hans Hans de Goede (5): ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10 ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10 ASoC: rt5640: Add emulated 'DAC1 Playback Switch' control ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' ASoC: Intel: bytcr_rt5640: Add used AIF to the components string sound/soc/codecs/rt5640.c | 106 +++++++++++++++++++++++--- sound/soc/codecs/rt5640.h | 4 + sound/soc/codecs/rt5651.c | 4 +- sound/soc/intel/boards/bytcr_rt5640.c | 11 ++- 4 files changed, 111 insertions(+), 14 deletions(-) -- 2.30.1 -
Hans de Goede authored
Most steps in this table are steps of 3dB (300 centi-dB), so we can simplify the table. This not only reduces the amount of space it takes inside the kernel, this also makes alsa-lib's mixer code actually accept the table, where as before this change alsa-lib saw the "ADC PGA Gain" control as a control without a dB scale. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.comSigned-off-by:
-
Benjamin Rood authored
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has the following bit field definitions: | BITS | FIELD | RW | RESET | DEFINITION | | 15 | RSVD | RO | 0x0 | Reserved | | 14 | RSVD | RW | 0x1 | Reserved | | 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode | | 11:10 | RSVD | RO | 0x0 | Reserved | | 9:8 | LBI_RESP | RW | 0x1 | Integrator Response | | 7:6 | RSVD | RO | 0x0 | Reserved | | 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode | | 4:1 | RSVD | RO | 0x0 | Reserved | | 0 | EN | RW | 0x0 | Enable/Disable AVC | The original default value written to the DAP_AVC_CTRL register during sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to bits 4 and 10, which are defined as RESERVED. It would also not set bits 12 and 14 to their correct RESET values of 0x1, and instead set them to 0x0. While the DAP_AVC module is effectively disabled because the EN bit is 0, this default value is still writing invalid values to registers that are marked as read-only and RESERVED as well as not setting bits 12 and 14 to their correct default values as defined by the datasheet. The correct value that should be written to the DAP_AVC_CTRL register is 0x5100, which configures the register bits to the default values defined by the datasheet, and prevents any writes to bits defined as 'read-only'. Generally speaking, it is best practice to NOT attempt to write values to registers/bits defined as RESERVED, as it generally produces unwanted/undefined behavior, or errors. Also, all credit for this patch should go to my colleague Dan MacDonald <dmacdonald@curbellmedical.com> for finding this error in the first place. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdfSigned-off-by:
Benjamin Rood <benjaminjrood@gmail.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-devSigned-off-by:
-
Hans de Goede authored
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Note this mirrors commit 3f31f7d9 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver. Signed-off-by:
-
Hans de Goede authored
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Note this mirrors commit 3f31f7d9 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver. Signed-off-by:
-
Hans de Goede authored
When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX models since these use almost the same settings. While doing this I accidentally also copied and kept the non-standard OVCD_TH_1500UA setting used on those models. This too low threshold is causing headsets to often be seen as headphones (without a headset-mic) and when correctly identified it is causing ghost play/pause button-presses to get detected. Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA setting, fixing these problems. Fixes: fbdae7d6 ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks") Signed-off-by:
-
Mark Brown authored
Hi All, While working on adding hardware-volume control support to the UCM profile for the rt5672 and on adding LED trigger support to the rt5670 codec driver. I hit / noticed a couple of issues this series fixes these issues. Regards, Hans Hans de Goede (4): ASoC: rt5670: Remove 'OUT Channel Switch' control ASoC: rt5670: Remove 'HP Playback Switch' control ASoC: rt5670: Remove ADC vol-ctrl mute bits poking from Sto1 ADC mixer settings ASoC: rt5670: Add emulated 'DAC1 Playback Switch' control sound/soc/codecs/rt5670.c | 110 +++++++++++++++++++++++++++++++++----- sound/soc/codecs/rt5670.h | 9 ++-- 2 files changed, 101 insertions(+), 18 deletions(-) -- 2.30.1 -
Shengjiu Wang authored
Add missed MODULE_DEVICE_TABLE for the driver can be loaded automatically at boot. Fixes: 92088477 ("ASoC: ak5558: Add support for AK5558 ADC driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1614149872-25510-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Add missed MODULE_DEVICE_TABLE for the driver can be loaded automatically at boot. Fixes: 08660086 ("ASoC: ak4458: Add support for AK4458 DAC driver") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
For reliable output-mute LED control we need a "DAC1 Playback Switch" control. The "DAC Playback volume" control is the only control in the path from the DAC1 data input to the speaker output, so the UCM profile for the speaker output will have its PlaybackMixerElem set to "DAC1". But userspace (pulseaudio) will set the "DAC1 Playback Volume" control to its softest setting (which is not fully muted) while still showing the speaker as being enabled at a low volume in the UI. If we were to set the SNDRV_CTL_ELEM_ACCESS_SPK_LED on the "DAC1 Playback Volume" control, this would mean then what pressing KEY_VOLUMEDOWN the speaker-mute LED (embedded in the volume-mute toggle key) would light while the UI is still showing the speaker as being enabled at a low volume, meaning that the UI and the LED are out of sync. Only after an _extra_ KEY_VOLUMEDOWN press would the UI show the speaker as being muted. The path from DAC1 data input to the speaker output does have a digital mixer with DAC1's data as one of its inputs direclty after the "DAC1 Playback Volume" control. This commit adds an emulated "DAC1 Playback Switch" control by: 1. Declaring the enable flag for that mixers DAC1 input as well as the "DAC1 Playback Switch" control both as SND_SOC_NOPM controls. 2. Storing the settings of both controls as driver-private data 3. Only clearing the mute flag for the DAC1 input of that mixer if the stored values indicate both controls are enabled. This is a preparation patch for adding "audio-mute" LED trigger support. Signed-off-by:
-
Hans de Goede authored
The SND_SOC_DAPM_MIXER declaration for "Sto1 ADC MIXL" and "Sto1 ADC MIXR" was using the mute bits from the RT5670_STO1_ADC_DIG_VOL control as mixer master mute bits. But these bits are already exposed to userspace as controls as part of the "ADC Capture Volume" / "ADC Capture Switch" control pair: SOC_DOUBLE("ADC Capture Switch", RT5670_STO1_ADC_DIG_VOL, RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("ADC Capture Volume", RT5670_STO1_ADC_DIG_VOL, RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 127, 0, adc_vol_tlv), Both the fact that the mute bits belong to the same reg as the vol-ctrl and the "Digital Mixer Path" diagram in the datasheet clearly shows that these mute bits are not part of the mixer and having 2 separate controls poking at the same bits is a bad idea. Remove the master-mute bits settings from the "Sto1 ADC MIXL" and "Sto1 ADC MIXR" DAPM widget declarations, avoiding these bits getting poked from 2 different places. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there already set the "ADC Capture Switch" as needed. Signed-off-by: -
Hans de Goede authored
The RT5670_L_MUTE_SFT and RT5670_R_MUTE_SFT bits (bits 15 and 7) of the RT5670_HP_VOL register are set / unset by the headphones deplop code run by rt5670_hp_event() on SND_SOC_DAPM_POST_PMU / SND_SOC_DAPM_PRE_PMD. So we should not also export a control to userspace which toggles these same bits. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "HP Playback Switch" control. Signed-off-by:
-
Hans de Goede authored
The "OUT Channel Switch" control is a left over from code copied from thr rt5640 codec driver. With the rt5640 codec driver the output volume controls have 2 pairs of mute bits: bit 7, 15: Mute Control for Spk/Headphone/Line Output Port bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel Bits 7 and 15 are normal mute bits on the rt5670/5672 which are controlled by 2 dapm widgets: SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0, &lout_l_enable_control), SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0, &lout_r_enable_control), But on the 5670/5672 bit 6 is always reserved, where as bit 14 is "LOUT Differential Mode" on the 5670 and also reserved on the 5672. So the "OUT Channel Switch" control which is controlling bits 6+14 of the "LINE Output Control" register is bogus -> remove it. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "OUT Channel Switch" control. Signed-off-by: -
Alexander Shiyan authored
When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt() function rewrites the number of slots previously set by the fsl_ssi_set_dai_tdm_slot() function to 2 by default. To fix this, let's use the saved slot count value or, if TDM is not used and the slot count is not set, proceed as before. Fixes: 4f14f5c1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode") Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ruSigned-off-by:
-
Colin Ian King authored
There is potential read of the uninitialized variable ec_tx if the call to snd_soc_component_read fails or returns an unrecognized w->name. To avoid this corner case, initialize ec_tx to -1 so that it is caught later when ec_tx is bounds checked. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 4f692926 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210215163313.84026-1-colin.king@canonical.comSigned-off-by:
-
Jack Yu authored
Enable BCLK detection after calibration. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210222090057.29532-2-jack.yu@realtek.comSigned-off-by:
-
Jack Yu authored
Remove 0x100 cache re-sync to solve i2c communication error. Signed-off-by:
-
- 06 Mar, 2021 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 1 commit
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
