Skip to content

L
linux
Switch branch/tag
  1. 26 Nov, 2016 10 commits
  3. 25 Nov, 2016 8 commits
    • David S. Miller's avatar
      Merge branch 'cgroup-bpf' · ca89fa77
      David S. Miller authored 
      Daniel Mack says:

====================
Add eBPF hooks for cgroups

This is v9 of the patch set to allow eBPF programs for network
filtering and accounting to be attached to cgroups, so that they apply
to all sockets of all tasks placed in that cgroup. The logic also
allows to be extendeded for other cgroup based eBPF logic.

Again, only minor details are updated in this version.

Changes from v8:

* Move the egress hooks into ip_finish_output() and ip6_finish_output()
  so they run after the netfilter hooks. For IPv4 multicast, add a new
  ip_mc_finish_output() callback that is invoked on success by
  netfilter, and call the eBPF program from there.

Changes from v7:

* Replace the static inline function cgroup_bpf_run_filter() with
  two specific macros for ingress and egress.  This addresses David
  Miller's concern regarding skb->sk vs. sk in the egress path.
  Thanks a lot to Daniel Borkmann and Alexei Starovoitov for the
  suggestions.

Changes from v6:

* Rebased to 4.9-rc2

* Add EXPORT_SYMBOL(__cgroup_bpf_run_filter). The kbuild test robot
  now succeeds in building this version of the patch set.

* Switch from bpf_prog_run_save_cb() to bpf_prog_run_clear_cb() to not
  tamper with the contents of skb->cb[]. Pointed out by Daniel
  Borkmann.

* Use sk_to_full_sk() in the egress path, as suggested by Daniel
  Borkmann.

* Renamed BPF_PROG_TYPE_CGROUP_SOCKET to BPF_PROG_TYPE_CGROUP_SKB, as
  requested by David Ahern.

* Added Alexei's Acked-by tags.

Changes from v5:

* The eBPF programs now operate on L3 rather than on L2 of the packets,
  and the egress hooks were moved from __dev_queue_xmit() to
  ip*_output().

* For BPF_PROG_TYPE_CGROUP_SOCKET, disallow direct access to the skb
  through BPF_LD_[ABS|IND] instructions, but hook up the
  bpf_skb_load_bytes() access helper instead. Thanks to Daniel Borkmann
  for the help.

Changes from v4:

* Plug an skb leak when dropping packets due to eBPF verdicts in
  __dev_queue_xmit(). Spotted by Daniel Borkmann.

* Check for sk_fullsock(sk) in __cgroup_bpf_run_filter() so we don't
  operate on timewait or request sockets. Suggested by Daniel Borkmann.

* Add missing @parent parameter in kerneldoc of __cgroup_bpf_update().
  Spotted by Rami Rosen.

* Include linux/jump_label.h from bpf-cgroup.h to fix a kbuild error.

Changes from v3:

* Dropped the _FILTER suffix from BPF_PROG_TYPE_CGROUP_SOCKET_FILTER,
  renamed BPF_ATTACH_TYPE_CGROUP_INET_{E,IN}GRESS to
  BPF_CGROUP_INET_{IN,E}GRESS and alias BPF_MAX_ATTACH_TYPE to
  __BPF_MAX_ATTACH_TYPE, as suggested by Daniel Borkmann.

* Dropped the attach_flags member from the anonymous struct for BPF
  attach operations in union bpf_attr. They can be added later on via
  CHECK_ATTR. Requested by Daniel Borkmann and Alexei.

* Release old_prog at the end of __cgroup_bpf_update rather that at
  the beginning to fix a race gap between program updates and their
  users. Spotted by Daniel Borkmann.

* Plugged an skb leak when dropping packets on the egress path.
  Spotted by Daniel Borkmann.

* Add cgroups@vger.kernel.org to the loop, as suggested by Rami Rosen.

* Some minor coding style adoptions not worth mentioning in particular.

Changes from v2:

* Fixed the RCU locking details Tejun pointed out.

* Assert bpf_attr.flags == 0 in BPF_PROG_DETACH syscall handler.

Changes from v1:

* Moved all bpf specific cgroup code into its own file, and stub
  out related functions for !CONFIG_CGROUP_BPF as static inline nops.
  This way, the call sites are not cluttered with #ifdef guards while
  the feature remains compile-time configurable.

* Implemented the new scheme proposed by Tejun. Per cgroup, store one
  set of pointers that are pinned to the cgroup, and one for the
  programs that are effective. When a program is attached or detached,
  the change is propagated to all the cgroup's descendants. If a
  subcgroup has its own pinned program, skip the whole subbranch in
  order to allow delegation models.

* The hookup for egress packets is now done from __dev_queue_xmit().

* A static key is now used in both the ingress and egress fast paths
  to keep performance penalties close to zero if the feature is
  not in use.

* Overall cleanup to make the accessors use the program arrays.
  This should make it much easier to add new program types, which
  will then automatically follow the pinned vs. effective logic.

* Fixed locking issues, as pointed out by Eric Dumazet and Alexei
  Starovoitov. Changes to the program array are now done with
  xchg() and are protected by cgroup_mutex.

* eBPF programs are now expected to return 1 to let the packet pass,
  not >= 0. Pointed out by Alexei.

* Operation is now limited to INET sockets, so local AF_UNIX sockets
  are not affected. The enum members are renamed accordingly. In case
  other socket families should be supported, this can be extended in
  the future.

* The sample program learned to support both ingress and egress, and
  can now optionally make the eBPF program drop packets by making it
  return 0.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ca89fa77
    • Daniel Mack's avatar
      samples: bpf: add userspace example for attaching eBPF programs to cgroups · d8c5b17f
      Daniel Mack authored 
      Add a simple userpace program to demonstrate the new API to attach eBPF
programs to cgroups. This is what it does:

 * Create arraymap in kernel with 4 byte keys and 8 byte values

 * Load eBPF program

   The eBPF program accesses the map passed in to store two pieces of
   information. The number of invocations of the program, which maps
   to the number of packets received, is stored to key 0. Key 1 is
   incremented on each iteration by the number of bytes stored in
   the skb.

 * Detach any eBPF program previously attached to the cgroup

 * Attach the new program to the cgroup using BPF_PROG_ATTACH

 * Once a second, read map[0] and map[1] to see how many bytes and
   packets were seen on any socket of tasks in the given cgroup.

The program takes a cgroup path as 1st argument, and either "ingress"
or "egress" as 2nd. Optionally, "drop" can be passed as 3rd argument,
which will make the generated eBPF program return 0 instead of 1, so
the kernel will drop the packet.

libbpf gained two new wrappers for the new syscall commands.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8c5b17f
    • Daniel Mack's avatar
      net: ipv4, ipv6: run cgroup eBPF egress programs · 33b48679
      Daniel Mack authored 
      If the cgroup associated with the receiving socket has an eBPF
programs installed, run them from ip_output(), ip6_output() and
ip_mc_output(). From mentioned functions we have two socket contexts
as per 7026b1dd ("netfilter: Pass socket pointer down through
okfn()."). We explicitly need to use sk instead of skb->sk here,
since otherwise the same program would run multiple times on egress
when encap devices are involved, which is not desired in our case.

eBPF programs used in this context are expected to either return 1 to
let the packet pass, or != 1 to drop them. The programs have access to
the skb through bpf_skb_load_bytes(), and the payload starts at the
network headers (L3).

Note that cgroup_bpf_run_filter() is stubbed out as static inline nop
for !CONFIG_CGROUP_BPF, and is otherwise guarded by a static key if
the feature is unused.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33b48679
    • Daniel Mack's avatar
      net: filter: run cgroup eBPF ingress programs · c11cd3a6
      Daniel Mack authored 
      If the cgroup associated with the receiving socket has an eBPF
programs installed, run them from sk_filter_trim_cap().

eBPF programs used in this context are expected to either return 1 to
let the packet pass, or != 1 to drop them. The programs have access to
the skb through bpf_skb_load_bytes(), and the payload starts at the
network headers (L3).

Note that cgroup_bpf_run_filter() is stubbed out as static inline nop
for !CONFIG_CGROUP_BPF, and is otherwise guarded by a static key if
the feature is unused.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c11cd3a6
    • Daniel Mack's avatar
      bpf: add BPF_PROG_ATTACH and BPF_PROG_DETACH commands · f4324551
      Daniel Mack authored 
      Extend the bpf(2) syscall by two new commands, BPF_PROG_ATTACH and
BPF_PROG_DETACH which allow attaching and detaching eBPF programs
to a target.

On the API level, the target could be anything that has an fd in
userspace, hence the name of the field in union bpf_attr is called
'target_fd'.

When called with BPF_ATTACH_TYPE_CGROUP_INET_{E,IN}GRESS, the target is
expected to be a valid file descriptor of a cgroup v2 directory which
has the bpf controller enabled. These are the only use-cases
implemented by this patch at this point, but more can be added.

If a program of the given type already exists in the given cgroup,
the program is swapped automically, so userspace does not have to drop
an existing program first before installing a new one, which would
otherwise leave a gap in which no program is attached.

For more information on the propagation logic to subcgroups, please
refer to the bpf cgroup controller implementation.

The API is guarded by CAP_NET_ADMIN.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f4324551
    • Daniel Mack's avatar
      cgroup: add support for eBPF programs · 30070984
      Daniel Mack authored 
      This patch adds two sets of eBPF program pointers to struct cgroup.
One for such that are directly pinned to a cgroup, and one for such
that are effective for it.

To illustrate the logic behind that, assume the following example
cgroup hierarchy.

  A - B - C
        \ D - E

If only B has a program attached, it will be effective for B, C, D
and E. If D then attaches a program itself, that will be effective for
both D and E, and the program in B will only affect B and C. Only one
program of a given type is effective for a cgroup.

Attaching and detaching programs will be done through the bpf(2)
syscall. For now, ingress and egress inet socket filtering are the
only supported use-cases.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      30070984
    • Daniel Mack's avatar
      bpf: add new prog type for cgroup socket filtering · 0e33661d
      Daniel Mack authored 
      This program type is similar to BPF_PROG_TYPE_SOCKET_FILTER, except that
it does not allow BPF_LD_[ABS|IND] instructions and hooks up the
bpf_skb_load_bytes() helper.

Programs of this type will be attached to cgroups for network filtering
and accounting.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e33661d
    • Colin Ian King's avatar
      cxgb4: fix memory leak on txq_info · 619228d8
      Colin Ian King authored 
      Currently if txq_info->uldtxq cannot be allocated then
txq_info->txq is being kfree'd (which is redundant because it
is NULL) instead of txq_info. Fix this by instead kfree'ing
txq_info.
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      619228d8
  5. 24 Nov, 2016 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7