Declarations of dummy/template packet headers and offsets can be
minified to improve readability and simplify adding new templates.
Move all the repetitive constructions into two macros and let them
do the name and type expansions.
Linewrap removal is yet another positive side effect.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_find_dummy_packet() contains a lot of boilerplate code and a
nice room for copy-paste mistakes.
Instead of passing 3 separate pointers back and forth to get packet
template (dummy) params, directly return a structure containing
them. Then, use a macro to compose compound literals and avoid code
duplication on return path.
Now, dummy packet type/name is needed only once to return a full
correct triple pkt-pkt_len-offsets, and those are all one-liners.
dummy_ipv4_gtpu_ipv4_packet_offsets is just moved around and renamed
(as well as dummy_ipv6_gtp_packet_offsets) with no function changes.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

A loop performing header modification according to the provided mask
in ice_fill_adv_dummy_packet() is very cryptic (and error-prone).
Replace two identical cast-deferences with a variable. Replace three
struct-member-array-accesses with a variable. Invert the condition,
reduce the indentation by one -> eliminate line wraps.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_adv_lkup_elem fields h_u and m_u are being accessed as raw u16
arrays in several places.
To reduce cast and braces burden, add permanent array-of-u16 aliases
with the same size as the `union ice_prot_hdr` itself via anonymous
unions to the actual struct declaration, and just access them
directly.

This:
 - removes the need to cast the union to u16[] and then dereference
   it each time -> reduces the horizon for potential bugs;
 - improves -Warray-bounds coverage -- the array size is now known
   at compilation time;
 - addresses cppcheck complaints.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently, when user adds a tc action and the action gets offloaded,
the user expects the HW stats to be counted also. This limits the
amount of supported offloaded filters, as HW counter resources may
be quite limited. Without counter assigned, the HW is capable to
carry much more filters.

To resolve the issue above, the following types of HW stats are
offloaded and supported by the driver:

any       - current default, user does not care about the type.
delayed   - polled from HW periodically.
disabled  - no HW stats needed.
immediate - not supported.

Example:
  tc filter add dev PORT ingress proto ip flower skip_sw ip_proto 0x11 \
    action drop
  tc filter add dev PORT ingress proto ip flower skip_sw ip_proto 0x12 \
    action drop hw_stats disabled
  tc filter add dev sw1p1 ingress proto ip flower skip_sw ip_proto 0x14 \
    action drop hw_stats delayed
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Link: https://lore.kernel.org/r/1649164814-18731-1-git-send-email-volodymyr.mytnyk@plvision.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

idev->addr_list needs to be protected by idev->lock. However, it is not
always possible to do so while iterating and performing actions on
inet6_ifaddr instances. For example, multiple functions (like
addrconf_{join,leave}_anycast) eventually call down to other functions
that acquire the idev->lock. The current code temporarily unlocked the
idev->lock during the loops, which can cause race conditions. Moving the
locks up is also not an appropriate solution as the ordering of lock
acquisition will be inconsistent with for example mc_lock.

This solution adds an additional field to inet6_ifaddr that is used
to temporarily add the instances to a temporary list while holding
idev->lock. The temporary list can then be traversed without holding
idev->lock. This change was done in two places. In addrconf_ifdown, the
list_for_each_entry_safe variant of the list loop is also no longer
necessary as there is no deletion within that specific loop.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix:

  drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c: In function ‘bnx2x_check_blocks_with_parity3’:
  drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:4917:4: error: case label does not reduce to an integer constant
      case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
      ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220405151517.29753-4-bp@alien8.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We had various bugs over the years with code
breaking the assumption that tp->snd_cwnd is greater
than zero.

Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added
in commit 8b8a321f ("tcp: fix zero cwnd in tcp_cwnd_reduction")
can trigger, and without a repro we would have to spend
considerable time finding the bug.

Instead of complaining too late, we want to catch where
and when tp->snd_cwnd is set to an illegal value.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a same action when the variable is initialized
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver for LAN Media WAN interfaces spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.

Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.

Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_alloc_skb() has assigned ssi->netdev to skb->dev if successed,
no need to repeat assignment.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"little-endian" has no specific content, use more helper function
of_property_read_bool() instead of of_get_property()
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Felix Fietkau says:

====================
MediaTek SoC flow offload improvements + wireless support

This series contains the following improvements to mediatek ethernet flow
offload support:

- support dma-coherent on ethernet to improve performance
- add ipv6 offload support
- rework hardware flow table entry handling to improve dealing with hash
  collisions and competing flows
- support creating offload entries from user space
- support creating offload entries with just source/destination mac address,
  vlan and output device information
- add driver changes for supporting the Wireless Ethernet Dispatch core,
  which can be used to offload flows from ethernet to MT7915 PCIe WLAN
  devices

Changes in v2:
- add missing dt-bindings patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used to implement a limited form of bridge offloading.
Since the hardware does not support flow table entries with just source
and destination MAC address, the driver has to emulate it.

The hardware automatically creates entries entries for incoming flows, even
when they are bridged instead of routed, and reports when packets for these
flows have reached the minimum PPS rate for offloading.

After this happens, we look up the L2 flow offload entry based on the MAC
header and fill in the output routing information in the flow table.
The dynamically created per-flow entries are automatically removed when
either the hardware flowtable entry expires, is replaced, or if the offload
rule they belong to is removed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to MediaTek, this feature is not supported in current hardware
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware was designed to handle flow detection and creation of flow entries
by itself, relying on the software primarily for filling in egress routing
information.
When there is a hash collision between multiple flows, this allows the hardware
to maintain the entry for the most active flow.
Additionally, the hardware only keeps offloading active for entries with at
least 30 packets per second.

With this rework, the code no longer creates a hardware entries directly.
Instead, the hardware entry is only created when the PPE reports a matching
unbound flow with the minimum target rate.
In order to reduce CPU overhead, looking for flows belonging to a hash entry
is rate limited to once every 100ms.

This rework is also used as preparation for emulating bridge offload by
managing L4 offload entries on demand.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Preparation for adding more data to it, which will increase its size.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows offload entries to be created from user space
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the missing IPv6 flow offloading support for routing only.
Hardware flow offloading is done by the packet processing engine (PPE)
of the Ethernet MAC and as it doesn't support mangling of IPv6 packets,
IPv6 NAT cannot be supported.
Signed-off-by: David Bentham <db260179@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce wed0 and wed1 nodes in order to enable offloading forwarding
between ethernet and wireless devices on the mt7622 chipset.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows hardware flow offloading from Ethernet to WLAN on MT7622 SoC
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Wireless Ethernet Dispatch subsystem on the MT7622 SoC can be
configured to intercept and handle access to the DMA queues and
PCIe interrupts for a MT7615/MT7915 wireless card.
It can manage the internal WDMA (Wireless DMA) controller, which allows
ethernet packets to be passed from the packet switch engine (PSE) to the
wireless card, bypassing the CPU entirely.
This can be used to implement hardware flow offloading from ethernet to
WLAN.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the pcie mirror document bindings for MT7622 SoC.
The feature is used for intercepting PCIe MMIO access for the WED core
Add related info in mediatek-net bindings.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the binding for the Wireless Ethernet Dispatch core on the MT7622
SoC, which is used for Ethernet->WLAN offloading
Add related info in mediatek-net bindings.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

It improves performance by eliminating the need for a cache flush on rx and tx
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

It improves performance by eliminating the need for a cache flush on rx and tx
In preparation for supporting WED (Wireless Ethernet Dispatch), also add a
function for disabling coherent DMA at runtime.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce dma-coherent, cci-control and hifsys optional properties to
the mediatek ethernet controller bindings
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Walle says:

====================
net: phy: mscc-miim: add MDIO bus frequency support

Introduce MDIO bus frequency support. This way the board can have a
faster (or maybe slower) bus frequency than the hardware default.

changes since v2:
 - resend, no RFC anymore, because net-next is open again
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Until now, the MDIO bus will have the hardware default bus frequency.
Read the desired frequency of the bus from the device tree and configure
it.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the (optional) clock input of the MDIO controller and indicate that
the common clock-frequency property is supported. The driver can use it
to set the desired MDIO bus frequency.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the mscc-miim device tree binding to the new YAML format.

The original binding don't mention if the interrupt property is optional
or not. But on the SparX-5 SoC, for example, the interrupt property isn't
used, thus in the new binding that property is optional. FWIW the driver
doesn't use interrupts at all.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In include/uapi/linux/tipc_config.h, there's a comment that it includes
arpa/inet.h for ntohs; but ntohs is not defined in any UAPI header. For
now, reuse the definitions from include/linux/byteorder/generic.h, since
the various conversion functions do exist in UAPI headers:
include/uapi/linux/byteorder/big_endian.h
include/uapi/linux/byteorder/little_endian.h

We would like to get to the point where we can build UAPI header tests
with -nostdinc, meaning that kernel UAPI headers should not have a
circular dependency on libc headers.

Link: https://android-review.googlesource.com/c/platform/bionic/+/2048127Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_recv_datagram() has two parameters 'flags' and 'noblock' that are
merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)'

As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags'
into 'flags' and 'noblock' with finally obsolete bit operations like this:

skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc);

And this is not even done consistently with the 'flags' parameter.

This patch removes the obsolete and costly splitting into two parameters
and only performs bit operations when really needed on the caller side.

One missing conversion thankfully reported by kernel test robot. I missed
to enable kunit tests to build the mctp code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In [1], Will raised a potential issue that the cfg80211 code,
which does (from a locking perspective)

  rtnl_lock()
  wiphy_lock()
  rtnl_unlock()

might be suspectible to ABBA deadlocks, because rtnl_unlock()
calls netdev_run_todo(), which might end up calling rtnl_lock()
again, which could then deadlock (see the comment in the code
added here for the scenario).

Some back and forth and thinking ensued, but clearly this can't
happen if the net_todo_list is empty at the rtnl_unlock() here.
Clearly, the code here cannot actually put an entry on it, and
all other users of rtnl_unlock() will empty it since that will
always go through netdev_run_todo(), emptying the list.

So the only other way to get there would be to add to the list
and then unlock the RTNL without going through rtnl_unlock(),
which is only possible through __rtnl_unlock(). However, this
isn't exported and not used in many places, and none of them
seem to be able to unregister before using it.

Therefore, add a WARN_ON() in the code to ensure this invariant
won't be broken, so that the cfg80211 (or any similar) code
stays safe.

[1] https://lore.kernel.org/r/Yjzpo3TfZxtKPMAG@google.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220404113847.0ee02e4a70da.Ic73d206e217db20fd22dcec14fe5442ca732804b@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The setting of i here
err_nexthop6_group_get:
	i = nrt6;
Is redundant, i is already nrt6.  So remove
this statement.

The for loop for the unwinding
err_rt6_create:
	for (i--; i >= 0; i--) {
Is equivelent to
	for (; i > 0; i--) {

Two consecutive labels can be reduced to one.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220402121516.2750284-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"