- 24 Jul, 2012 2 commits
-
-
Masanari Iida authored
Correct spelling typo in debug messages and comments in drivers/iommu. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Masanari Iida authored
Correct spelling typo in debug messages and comments within drivers/video. Signed-off-by:
-
- 20 Jul, 2012 7 commits
-
-
Jesper Juhl authored
This patch simply adds a newline character at end-of-file to those files in Documentation/ that currently lack one. This is done for a few different reasons: A) It's rather annoying when you do "cat some_file.txt" that your prompt/cursor ends up at the end of the last line of output rather than on a new line. B) Some tools that process files line-by-line may get confused by the lack of a newline on the last line. C) The "\ No newline at end of file" line in diffs annoys me for some reason. So, let's just add the missing newline once and for all. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Geert Uytterhoeven authored
Obsoleted since commit 7c5763b8 ("drivers: misc: Remove MISC_DEVICES config option") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Masanari Iida authored
Correct spelling typo in cpufreq driver. Signed-off-by:
-
Masatake YAMATO authored
Signed-off-by:
Masatake YAMATO <yamato@redhat.com> Signed-off-by:
-
Masanari Iida authored
Correcting spelling typo in mach-omap2 Signed-off-by:
-
Krzysztof Wilczynski authored
This is to change use of "0x%08x" in favour of "%p" as per ../Documentation/printk-formats.txt, which also takes care about the following warning during compilation time: drivers/scsi/aha152x.c: In function ‘get_command’: drivers/scsi/aha152x.c:2987: warning: cast from pointer to integer of different size Signed-off-by:
Krzysztof Wilczynski <krzysztof.wilczynski@linux.com> Signed-off-by:
-
- 17 Jul, 2012 1 commit
-
-
Steve Glendinning authored
I no longer have a mailbox at smsc.com, and I've had two reports that that email address now bounces from people trying to contact me. This patch updates all references to that invalid address to one that I can be contacted on more permanently. This patch also updates the maintainer status to reflect the fact I'm no longer directly paid to maintain these drivers. Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
- 12 Jul, 2012 1 commit
-
-
Liu Bo authored
It should be convert_extent_bit. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
-
- 11 Jul, 2012 1 commit
-
-
Alan Cox authored
Reported-by: <dcb314@hotmail.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44331Signed-off-by:
-
- 10 Jul, 2012 1 commit
-
-
Liu Bo authored
poitner -> pointer. Signed-off-by:
-
- 09 Jul, 2012 1 commit
-
-
Martlin Ettl authored
Dredged out of bugzilla Reported-by:
Martlin Ettl <ettl.martin@gmx.de> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=15492Signed-off-by:
-
- 29 Jun, 2012 1 commit
-
-
Jiri Kosina authored
Conflicts: include/linux/mmzone.h Synced with Linus' tree so that trivial patch can be applied on top of up-to-date code properly. Reported-by:Stephen Rothwell <sfr@canb.auug.org.au>
-
- 28 Jun, 2012 8 commits
-
-
Paul Gortmaker authored
The CONFIG_X86_UP_APIC option no longer exists. Delete the reference of it. Cc: trivial@kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Christopher L. Simons authored
Fixed a spelling error (less that you -> less than you) Signed-off-by:
Christopher L. Simons <christopherleesimons@gmail.com> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Wanpeng Li authored
Signed-off-by:
Wanpeng Li <liwp.linux@gmail.com> Signed-off-by:
-
Wanpeng Li authored
Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Wanpeng Li authored
Since there are five lists in LRU cache, the array nr in get_scan_count should be: nr[0] = anon inactive pages to scan; nr[1] = anon active pages to scan nr[2] = file inactive pages to scan; nr[3] = file active pages to scan Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Akinobu Mita authored
Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by:
-
Paul Bolle authored
Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Paul Bolle authored
Signed-off-by:
-
- 27 Jun, 2012 1 commit
-
-
Alan Cox authored
Fix harmless reference off end of array Reported-by: <dcb314@hotmail.com> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?43861Signed-off-by:
-
- 05 Jun, 2012 2 commits
-
-
Paul Bolle authored
A quoted include starts with a superfluous "./". Clean up that quoted include. Signed-off-by:
-
Paul Bolle authored
A few quoted includes start with a superfluous "./". Clean up those quoted includes. Signed-off-by:
-
- 03 Jun, 2012 2 commits
-
-
Kazuo Moriwaka authored
Documenting description about max minor number of raw devices. Signed-off-by:
Kazuo Moriwaka <moriwaka@gmail.com> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
- 29 May, 2012 12 commits
-
-
Hugh Dickins authored
With mem_cgroup_disabled() now explicit, it becomes clear that the zone_reclaim_stat structure actually belongs in lruvec, per-zone when memcg is disabled but per-memcg per-zone when it's enabled. We can delete mem_cgroup_get_reclaim_stat(), and change update_page_reclaim_stat() to update just the one set of stats, the one which get_scan_count() will actually use. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Although one has to admire the skill with which it has been concealed, scanning_global_lru(mz) is actually just an interesting way to test mem_cgroup_disabled(). Too many developer hours have been wasted on confusing it with global_reclaim(): just use mem_cgroup_disabled(). Signed-off-by:
Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Hugh Dickins authored
That stuff __mem_cgroup_commit_charge_swapin() does with a swap entry, it has a name and even a declaration: just use mem_cgroup_uncharge_swap(). Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Hugh Dickins authored
The need_fixup arg to mem_cgroup_move_swap_account() is always false, so just remove it. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch changes memcg's behavior at task_move(). At task_move(), the kernel scans a task's page table and move the changes for mapped pages from source cgroup to target cgroup. There has been a bug at handling shared anonymous pages for a long time. Before patch: - The spec says 'shared anonymous pages are not moved.' - The implementation was 'shared anonymoys pages may be moved'. If page_mapcount <=2, shared anonymous pages's charge were moved. After patch: - The spec says 'all anonymous pages are moved'. - The implementation is 'all anonymous pages are moved'. Considering usage of memcg, this will not affect user's experience. 'shared anonymous' pages only exists between a tree of processes which don't do exec(). Moving one of process without exec() seems not sane. For example, libcgroup will not be affected by this change. (Anyway, no one noticed the implementation for a long time...) Below is a discussion log: - current spec/implementation are complex - Now, shared file caches are moved - It adds unclear check as page_mapcount(). To do correct check, we should check swap users, etc. - No one notice this implementation behavior. So, no one get benefit from the design. - In general, once task is moved to a cgroup for running, it will not be moved.... - Finally, we have control knob as memory.move_charge_at_immigrate. Here is a patch to allow moving shared pages, completely. This makes memcg simpler and fix current broken code. Suggested-by: -
Gavin Shan authored
The overall memblock has been organized into the memory regions and reserved regions. Initially, the memory regions and reserved regions are stored in the predetermined arrays of "struct memblock _region". It's possible for the arrays to be enlarged when we have newly added regions, but no free space left there. The policy here is to create double-sized array either by slab allocator or memblock allocator. Unfortunately, we didn't free the old array, which might be allocated through slab allocator before. That would cause memory leak. The patch introduces 2 variables to trace where (slab or memblock) the memory and reserved regions come from. The memory for the memory or reserved regions will be deallocated by kfree() if that was allocated by slab allocator. Thus to fix the memory leak issue. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Gavin Shan authored
The overall memblock has been organized into the memory regions and reserved regions. Initially, the memory regions and reserved regions are stored in the predetermined arrays of "struct memblock _region". It's possible for the arrays to be enlarged when we have newly added regions for them, but no enough space there. Under the situation, We will created double-sized array to meet the requirement. However, the original implementation converted the VA (Virtual Address) of the newly allocated array of regions to PA (Physical Address), then translate back when we allocates the new array from slab. That's actually unnecessary. The patch removes the duplicate VA/PA conversion. Signed-off-by:
-
Pravin B Shelar authored
Transparent huge pages can change page->flags (PG_compound_lock) without taking Slab lock. Since THP can not break slab pages we can safely access compound page without taking compound lock. Specifically this patch fixes a race between compound_unlock() and slab functions which perform page-flags updates. This can occur when get_page()/put_page() is called on a page from slab. [akpm@linux-foundation.org: tweak comment text, fix comment layout, fix label indenting] Reported-by:
Amey Bhide <abhide@nicira.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Acked-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
KyongHo authored
The transfer of ->flags causes some of the static mapping virtual addresses to be prematurely freed (before the mapping is removed) because VM_LAZY_FREE gets "set" if tmp->flags has VM_IOREMAP set. This might cause subsequent vmalloc/ioremap calls to fail because it might allocate one of the freed virtual address ranges that aren't unmapped. va->flags has different types of flags from tmp->flags. If a region with VM_IOREMAP set is registered with vm_area_add_early(), it will be removed by __purge_vmap_area_lazy(). Fix vmalloc_init() to correctly initialize vmap_area for the given vm_struct. Also initialise va->vm. If it is not set, find_vm_area() for the early vm regions will always fail. Signed-off-by:
KyongHo Cho <pullip.cho@samsung.com> Cc: "Olav Haugan" <ohaugan@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andrea Arcangeli authored
When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by:Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
-
David Rientjes authored
The oom_score_adj scale ranges from -1000 to 1000 and represents the proportion of memory available to the process at allocation time. This means an oom_score_adj value of 300, for example, will bias a process as though it was using an extra 30.0% of available memory and a value of -350 will discount 35.0% of available memory from its usage. The oom killer badness heuristic also uses this scale to report the oom score for each eligible process in determining the "best" process to kill. Thus, it can only differentiate each process's memory usage by 0.1% of system RAM. On large systems, this can end up being a large amount of memory: 256MB on 256GB systems, for example. This can be fixed by having the badness heuristic to use the actual memory usage in scoring threads and then normalizing it to the oom_score_adj scale for userspace. This results in better comparison between eligible threads for kill and no change from the userspace perspective. Suggested-by:
Dave Jones <davej@redhat.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Satoru Moriya authored
Sometimes we'd like to avoid swapping out anonymous memory. In particular, avoid swapping out pages of important process or process groups while there is a reasonable amount of pagecache on RAM so that we can satisfy our customers' requirements. OTOH, we can control how aggressive the kernel will swap memory pages with /proc/sys/vm/swappiness for global and /sys/fs/cgroup/memory/memory.swappiness for each memcg. But with current reclaim implementation, the kernel may swap out even if we set swappiness=0 and there is pagecache in RAM. This patch changes the behavior with swappiness==0. If we set swappiness==0, the kernel does not swap out completely (for global reclaim until the amount of free pages and filebacked pages in a zone has been reduced to something very very small (nr_free + nr_filebacked < high watermark)). Signed-off-by:
Satoru Moriya <satoru.moriya@hds.com> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
