- 11 Nov, 2011 14 commits
-
-
Johannes Berg authored
Attempting to micro-optimise the scan by going fully live again when scanning the operating channel just made the code extremely complex and has little gain in most use cases. Remove all that code and simplify the state machine again. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Eliad Peller authored
mac80211 should set carrier_on for ibss vifs only while they are joined (similar to sta vifs) Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Rajkumar Manoharan authored
This patch sync up CalFreqPeir channel list and paprd rate mask of AR938x templates to the latest received from Systems team. Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
Configure xpa timing field while loading boad defaults to fix 11b CCK spur issue that was observed in EMI testing. Signed-off-by:
-
Rajkumar Manoharan authored
Read and configure quick drop feild from AR9003 eeprom inorder to help with strong signal. This patch also removes obsolate parameters ob, db_stage2, db_stage_3, db_stage4 from the eeprom templates. Signed-off-by:
-
Amitkumar Karwar authored
Following compilation warning is fixed by releasing referenced BSS structure returned by cfg80211_inform_bss(). "warning: ignoring return value of cfg80211_inform_bss, declared with attribute warn_unused_result" Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Cfg80211 stack allocates private area for driver use in struct cfg80211_bss. It will be freed by stack in bss_release(). Driver don't need to worry about it. In mwifiex driver, we use the private area just to store band information(u8). We don't allocate memory explicitly and store it's pointer in bss->priv. Hence we don't have any cleanup work to do in free_priv handler. Currently we try to free the allocated private area in free_priv handler which is not correct. This patch removes unnecessary free_priv handler. Signed-off-by:
-
Yogesh Ashok Powar authored
Following three warnings are fixed: >init.c +256 mwifiex_init_adapter(71) >warn: variable dereferenced before check 'adapter->sleep_cfm' >(see line 191) >sta_rx.c +193 mwifiex_process_sta_rx_packet(75) >warn: variable dereferenced before check 'priv' (see line 182) Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
Yogesh Ashok Powar authored
Rename DataRate to data_rate and arrange 'for' loop for better readability. Signed-off-by:
-
Yogesh Ashok Powar authored
Functions mwifiex_11n_dispatch_pkt_until_start_win and mwifiex_11n_scan_and_dispatch used to always return value zero for all inputs. Changing these functions to void. Signed-off-by:
-
Yogesh Ashok Powar authored
Use existing helper function mwifiex_fill_cap_info to fill the HT CAP info for ibss beacons. Also removing extra parenthesis block for better readability. Signed-off-by:
-
Yogesh Ashok Powar authored
A local variable is used to calculate ht_cap_info. Erroneously ht_cap.cap_info isn't updated in the ibss beacons after the calculation. This patch fixes it. Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
-
Arik Nemtsov authored
Initialize rate control algorithms only when supported rates are known for a TDLS peer sta. Direct Tx between peers is not allowed before the link is enabled. In turn, this only occurs after a change_station() call that sets supported rates. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
Dmitry Tarnyagin authored
The problem with PSM when a hidden SSID was used was originally reported by Juuso Oikarinen. - When generally scanning, the AP is getting a bss entry with a zero SSID. - When associating, a probe-req is sent to the AP with the SSID, and as a result a probe-response is received with the hidden SSID in place. As a consequence, a second bss entry is created for the AP, now with the real SSID. - After association, mac80211 executes ieee80211_recalc_ps(), but does not switch to powersave because the beacon-ies are missing. As result, the STA does not ever enter PSM. The patch merges in beacon ies of hidden bss from beacon to the probe response, creating a consistent set of ies in place. Patch is depended on "cfg80211: fix cmp_ies" made by Johannes. Signed-off-by:
Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by:
-
- 09 Nov, 2011 26 commits
-
-
Dan Carpenter authored
Probably we never hit this condition, but in case we do, we may as well put a return here instead of just printing a warning message and then corrupting memory. The caller doesn't check the return code. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Amitkumar Karwar authored
By default SDIO multiport aggregation is disabled. It's useful to get good throughput results. This patch enables it. Signed-off-by:
-
Dan Carpenter authored
We dereference adapter in the error handling code so this needed to be fixed. This function is always called like: adapter->if_ops.host_to_card(adapter, ...); so adapter can never be NULL and I've removed the NULL check. Signed-off-by:
-
Dan Carpenter authored
The previous if statement means this that pointer is NULL so there is no need to free it. Signed-off-by:
-
Julia Lawall authored
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by:
-
Johannes Berg authored
Implement the socket wifi TX status error queue reflection in mac80211. Signed-off-by:
-
Johannes Berg authored
The new wifi socket TX capability should be supported by wifi drivers, let them advertise whether they do or not. Signed-off-by:
-
Helmut Schaa authored
Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
Use SSB macros in order to clean up brcmfmac code Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
-
Franky Lin authored
Merged brcmf_sdbrcm_chip_attach into brcmf_sdio_chip_attach for better readability. Reviewed-by:
-
Franky Lin authored
Same register writes have been done in brcmf_sdbrcm_probe_init which is earlier in the same code path. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This will provide a better code flow that fits the logic Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
Franky Lin authored
This patch is part of abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
Currently backplane handle code is scatterd around dhd_sdio.c which is not good for maintenance and adding new backplane interconnect type support. This patch and the follow up patches are going to abstract all chip backplane control code specific for sdio bus into this new sdio_chip.c Reviewed-by:
-
Franky Lin authored
4329 with chiprev 0 can not be found on any product. The code can be removed. Reviewed-by:
-
Johannes Berg authored
For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by:
-
