- 11 Oct, 2019 40 commits
-
-
Lu Shuaibing authored
[ Upstream commit 0ce772fe ] The p9_tag_alloc() does not initialize the transport error t_err field. The struct p9_req_t *req is allocated and stored in a struct p9_client variable. The field t_err is never initialized before p9_conn_cancel() checks its value. KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool) reports this bug. ================================================================== BUG: KUMSAN: use of uninitialized memory in p9_conn_cancel+0x2d9/0x3b0 Read of size 4 at addr ffff88805f9b600c by task kworker/1:2/1216 CPU: 1 PID: 1216 Comm: kworker/1:2 Not tainted 5.2.0-rc4+ #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Workqueue: events p9_write_work Call Trace: dump_stack+0x75/0xae __kumsan_report+0x17c/0x3e6 kumsan_report+0xe/0x20 p9_conn_cancel+0x2d9/0x3b0 p9_write_work+0x183/0x4a0 process_one_work+0x4d1/0x8c0 worker_thread+0x6e/0x780 kthread+0x1ca/0x1f0 ret_from_fork+0x35/0x40 Allocated by task 1979: save_stack+0x19/0x80 __kumsan_kmalloc.constprop.3+0xbc/0x120 kmem_cache_alloc+0xa7/0x170 p9_client_prepare_req.part.9+0x3b/0x380 p9_client_rpc+0x15e/0x880 p9_client_create+0x3d0/0xac0 v9fs_session_init+0x192/0xc80 v9fs_mount+0x67/0x470 legacy_get_tree+0x70/0xd0 vfs_get_tree+0x4a/0x1c0 do_mount+0xba9/0xf90 ksys_mount+0xa8/0x120 __x64_sys_mount+0x62/0x70 do_syscall_64+0x6d/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff88805f9b6008 which belongs to the cache p9_req_t of size 144 The buggy address is located 4 bytes inside of 144-byte region [ffff88805f9b6008, ffff88805f9b6098) The buggy address belongs to the page: page:ffffea00017e6d80 refcount:1 mapcount:0 mapping:ffff888068b63740 index:0xffff88805f9b7d90 compound_mapcount: 0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 ffff888068b66450 ffff888068b66450 ffff888068b63740 raw: ffff88805f9b7d90 0000000000100001 00000001ffffffff 0000000000000000 page dumped because: kumsan: bad access detected ================================================================== Link: http://lkml.kernel.org/r/20190613070854.10434-1-shuaibinglu@126.comSigned-off-by:
Lu Shuaibing <shuaibinglu@126.com> [dominique.martinet@cea.fr: grouped the added init with the others] Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jia-Ju Bai authored
[ Upstream commit e2751463 ] In encode_attrs(), there is an if statement on line 1145 to check whether label is NULL: if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL)) When label is NULL, it is used on lines 1178-1181: *p++ = cpu_to_be32(label->lfs); *p++ = cpu_to_be32(label->pi); *p++ = cpu_to_be32(label->len); p = xdr_encode_opaque_fixed(p, label->label, label->len); To fix these bugs, label is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit 4ece3125 ] integrity_kernel_read() can fail in which case we forward to call ahash_request_free() on a currently running request. We have to wait for its completion before we can free the request. This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0 cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit f5e10401 ] integrity_kernel_read() returns the number of bytes read. If this is a short read then this positive value is returned from ima_calc_file_hash_atfm(). Currently this is only indirectly called from ima_calc_file_hash() and this function only tests for the return value being zero or nonzero and also doesn't forward the return value. Nevertheless there's no point in returning a positive value as an error, so translate a short read into -EINVAL. Signed-off-by:
-
Will Deacon authored
commit d71be2b6 upstream. Armv8.5 introduces a new PSTATE bit known as Speculative Store Bypass Safe (SSBS) which can be used as a mitigation against Spectre variant 4. Additionally, a CPU may provide instructions to manipulate PSTATE.SSBS directly, so that userspace can toggle the SSBS control without trapping to the kernel. This patch probes for the existence of SSBS and advertise the new instructions to userspace if they exist. Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit f43e5210 upstream. In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075c ("nl80211: Add support for EDMG channels") Reported-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Vasily Gorbik authored
commit ea298e6e upstream. Fix the following kasan finding: BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140 Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561 CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G B Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: ([<0000000231b3db7e>] show_stack+0x14e/0x1a8) [<0000000233826410>] dump_stack+0x1d0/0x218 [<000000023216fac4>] print_address_description+0x64/0x380 [<000000023216f5a8>] __kasan_report+0x138/0x168 [<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140 [<00000002332b618a>] group_store+0x3a/0x50 [<00000002323ac706>] kernfs_fop_write+0x246/0x3b8 [<00000002321d409a>] vfs_write+0x132/0x450 [<00000002321d47da>] ksys_write+0x122/0x208 [<0000000233877102>] system_call+0x2a6/0x2c8 Triggered by: openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group", O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16 write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26 The problem is that __get_next_id in ccwgroup_create_dev might set "buf" buffer pointer to NULL and explicit check for that is required. Cc: stable@vger.kernel.org Reviewed-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Johan Hovold authored
commit 7fd25e6f upstream. The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008 ("ieee802154: add support for atusb transceiver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Alexander Aring <alex.aring@gmail.com> Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Juergen Gross authored
commit a8fabb38 upstream. In case a user process using xenbus has open transactions and is killed e.g. via ctrl-C the following cleanup of the allocated resources might result in a deadlock due to trying to end a transaction in the xenbus worker thread: [ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds. [ 2551.492215] Tainted: P OE 5.0.0-29-generic #5 [ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2551.528585] xenbus D 0 37 2 0x80000080 [ 2551.528590] Call Trace: [ 2551.528603] __schedule+0x2c0/0x870 [ 2551.528606] ? _cond_resched+0x19/0x40 [ 2551.528632] schedule+0x2c/0x70 [ 2551.528637] xs_talkv+0x1ec/0x2b0 [ 2551.528642] ? wait_woken+0x80/0x80 [ 2551.528645] xs_single+0x53/0x80 [ 2551.528648] xenbus_transaction_end+0x3b/0x70 [ 2551.528651] xenbus_file_free+0x5a/0x160 [ 2551.528654] xenbus_dev_queue_reply+0xc4/0x220 [ 2551.528657] xenbus_thread+0x7de/0x880 [ 2551.528660] ? wait_woken+0x80/0x80 [ 2551.528665] kthread+0x121/0x140 [ 2551.528667] ? xb_read+0x1d0/0x1d0 [ 2551.528670] ? kthread_park+0x90/0x90 [ 2551.528673] ret_from_fork+0x35/0x40 Fix this by doing the cleanup via a workqueue instead. Reported-by:
James Dingwall <james@dingwall.me.uk> Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Wanpeng Li authored
commit 89340d09 upstream. This patch reverts commit 75437bb3 (locking/pvqspinlock: Don't wait if vCPU is preempted). A large performance regression was caused by this commit. on over-subscription scenarios. The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads, with three VMs of 80 vCPUs each. The score of ebizzy -M is reduced from 13000-14000 records/s to 1700-1800 records/s: Host Guest score vanilla w/o kvm optimizations upstream 1700-1800 records/s vanilla w/o kvm optimizations revert 13000-14000 records/s vanilla w/ kvm optimizations upstream 4500-5000 records/s vanilla w/ kvm optimizations revert 14000-15500 records/s Exit from aggressive wait-early mechanism can result in premature yield and extra scheduling latency. Actually, only 6% of wait_early events are caused by vcpu_is_preempted() being true. However, when one vCPU voluntarily releases its vCPU, all the subsequently waiters in the queue will do the same and the cascading effect leads to bad performance. kvm optimizations: [1] commit d73eb57b (KVM: Boost vCPUs that are delivering interrupts) [2] commit 266e85a5 (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption) Tested-by: loobinliu@tencent.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: loobinliu@tencent.com Cc: stable@vger.kernel.org Fixes: 75437bb3 (locking/pvqspinlock: Don't wait if vCPU is preempted) Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Russell King authored
commit 121bd08b upstream. We must not unconditionally set the DMA snoop bit; if the DMA API is assuming that the device is not DMA coherent, and the device snoops the CPU caches, the device can see stale cache lines brought in by speculative prefetch. This leads to the device seeing stale data, potentially resulting in corrupted data transfers. Commonly, this results in a descriptor fetch error such as: mmc0: ADMA error mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000040d8 mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001 mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 mmc0: sdhci: Host ctl2: 0x00000000 mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c mmc0: sdhci: ============================================ mmc0: error -5 whilst initialising SD card but can lead to other errors, and potentially direct the SDHCI controller to read/write data to other memory locations (e.g. if a valid descriptor is visible to the device in a stale cache line.) Fix this by ensuring that the DMA snoop bit corresponds with the behaviour of the DMA API. Since the driver currently only supports DT, use of_dma_is_coherent(). Note that device_get_dma_attr() can not be used as that risks re-introducing this bug if/when the driver is converted to ACPI. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Russell King authored
commit d1c536e3 upstream. ADMA errors are potentially data corrupting events; although we print the register state, we do not usefully print the ADMA descriptors. Worse than that, we print them by referencing their virtual address which is meaningless when the register state gives us the DMA address of the failing descriptor. Print the ADMA descriptors giving their DMA addresses rather than their virtual addresses, and print them using SDHCI_DUMP() rather than DBG(). We also do not show the correct value of the interrupt status register; the register dump shows the current value, after we have cleared the pending interrupts we are going to service. What is more useful is to print the interrupts that _were_ pending at the time the ADMA error was encountered. Fix that too. Signed-off-by:
-
Xiaolin Zhang authored
commit 0a3242bd upstream. when creating a vGPU workload, the guest context head pointer should be updated correctly by comparing with the exsiting workload in the guest worklod queue including the current running context. in some situation, there is a running context A and then received 2 new vGPU workload context B and A. in the new workload context A, it's head pointer should be updated with the running context A's tail. v2: walk through guest workload list in backward way. Cc: stable@vger.kernel.org Signed-off-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Lyude Paul authored
commit 698c1aa9 upstream. On the ThinkPad P71, we have one eDP connector exposed along with 5 DP connectors, resulting in a total of 11 TMDS encoders. Since the GPU on this system is also capable of MST, we create an additional 4 fake MST encoders for each DP port. Unfortunately, we also do this for the eDP port as well, resulting in: 1 eDP port: +1 TMDS encoder +4 DPMST encoders 5 DP ports: +2 TMDS encoders +4 DPMST encoders *5 ports == 35 encoders Which breaks things, since DRM has a hard coded limit of 32 encoders. So, fix this by not creating MSTMs for any eDP connectors. This brings us down to 31 encoders, although we can do better. This fixes driver probing for nouveau on the ThinkPad P71. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Sean Paul authored
commit 5fb9b797 upstream. clk_get_parent returns an error pointer upon failure, not NULL. So the checks as they exist won't catch a failure. This patch changes the checks and the return values to properly handle an error pointer. Fixes: c4d8cfe5 ("drm/msm/dsi: add implementation for helper functions") Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Rob Clark <robdclark@chromium.org> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Tomi Valkeinen authored
commit e2c4ed14 upstream. The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Adam Ford <aford173@gmail.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.comTested-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Srikar Dronamraju authored
commit 443f2d5b upstream. Observe a segmentation fault when 'perf stat' is asked to repeat forever with the interval option. Without fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.000211692 3,13,89,82,34,157 cycles 10.000380119 1,53,98,52,22,294 cycles 10.040467280 17,16,79,265 cycles Segmentation fault This problem was only observed when we use forever option aka -r 0 and works with limited repeats. Calling print_counter with ts being set to NULL, is not a correct option when interval is set. Hence avoid print_counter(NULL,..) if interval is set. With fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.019866622 3,15,14,43,08,697 cycles 10.039865756 3,15,16,31,95,261 cycles 10.059950628 1,26,05,47,158 cycles 5.009902655 3,14,52,62,33,932 cycles 10.019880228 3,14,52,22,89,154 cycles 10.030543876 66,90,18,333 cycles 5.009848281 3,14,51,98,25,437 cycles 10.029854402 3,15,14,93,04,918 cycles 5.009834177 3,14,51,95,92,316 cycles Committer notes: Did the 'git bisect' to find the cset introducing the problem to add the Fixes tag below, and at that time the problem reproduced as: (gdb) run stat -r0 -I500 sleep 1 <SNIP> Program received signal SIGSEGV, Segmentation fault. print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); (gdb) bt #0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 #1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938 #2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411 #3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370 #4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429 #5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473 #6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588 (gdb) Mostly the same as just before this patch: Program received signal SIGSEGV, Segmentation fault. 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep); (gdb) bt #0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 #1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670) at util/stat-display.c:1172 #2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656 #3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960 #4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310 #5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362 #6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406 #7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531 (gdb) Fixes: d4f63a47 ("perf stat: Introduce print_counters function") Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.2+ Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.comSigned-off-by:
-
Rasmus Villemoes authored
commit 144783a8 upstream. Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228e "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dkSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Sumit Saxena authored
commit d2182b2d upstream. In a Resizable BAR Control Register, bits 13:8 control the size of the BAR. The encoded values of these bits are as follows (see PCIe r5.0, sec 7.8.6.3): Value BAR size 0 1 MB (2^20 bytes) 1 2 MB (2^21 bytes) 2 4 MB (2^22 bytes) ... 43 8 EB (2^63 bytes) Previously we incorrectly set the BAR size bits for a 1 MB BAR to 0x1f instead of 0, so devices that support that size, e.g., new megaraid_sas and mpt3sas adapters, fail to initialize during resume from S3 sleep. Correctly calculate the BAR size bits for Resizable BAR control registers. Link: https://lore.kernel.org/r/20190725192552.24295-1-sumit.saxena@broadcom.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203939 Fixes: d3252ace ("PCI: Restore resized BAR state on resume") Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Jon Derrick authored
commit a1a30170 upstream. The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
-
Li RongQing authored
commit e430d802 upstream. The timer delayed for more than 3 seconds warning was triggered during testing. Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xee/0x100 ... Call Trace: process_one_work+0x18c/0x3a0 worker_thread+0x30/0x380 kthread+0x113/0x130 ret_from_fork+0x22/0x40 The reason is that the code in collect_expired_timers() uses jiffies unprotected: if (next_event > jiffies) base->clk = jiffies; As the compiler is allowed to reload the value base->clk can advance between the check and the store and in the worst case advance farther than next event. That causes the timer expiry to be delayed until the wheel pointer wraps around. Convert the code to use READ_ONCE() Fixes: 23696838 ("timers: Optimize collect_expired_timers() for NOHZ") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Liang ZhiCheng <liangzhicheng@baidu.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1568894687-14499-1-git-send-email-lirongqing@baidu.comSigned-off-by:
-
Kees Cook authored
commit 314eed30 upstream. When running on a system with >512MB RAM with a 32-bit kernel built with: CONFIG_DEBUG_VIRTUAL=y CONFIG_HIGHMEM=y CONFIG_HARDENED_USERCOPY=y all execve()s will fail due to argv copying into kmap()ed pages, and on usercopy checking the calls ultimately of virt_to_page() will be looking for "bad" kmap (highmem) pointers due to CONFIG_DEBUG_VIRTUAL=y: ------------[ cut here ]------------ kernel BUG at ../arch/x86/mm/physaddr.c:83! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc8 #6 Hardware name: Dell Inc. Inspiron 1318/0C236D, BIOS A04 01/15/2009 EIP: __phys_addr+0xaf/0x100 ... Call Trace: __check_object_size+0xaf/0x3c0 ? __might_sleep+0x80/0xa0 copy_strings+0x1c2/0x370 copy_strings_kernel+0x2b/0x40 __do_execve_file+0x4ca/0x810 ? kmem_cache_alloc+0x1c7/0x370 do_execve+0x1b/0x20 ... The check is from arch/x86/mm/physaddr.c: VIRTUAL_BUG_ON((phys_addr >> PAGE_SHIFT) > max_low_pfn); Due to the kmap() in fs/exec.c: kaddr = kmap(kmapped_page); ... if (copy_from_user(kaddr+offset, str, bytes_to_copy)) ... Now we can fetch the correct page to avoid the pfn check. In both cases, hardened usercopy will need to walk the page-span checker (if enabled) to do sanity checking. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/201909171056.7F2FFD17@keescookSigned-off-by:
-
Tom Zanussi authored
commit 17f8607a upstream. Original changelog from Steve Rostedt (except last sentence which explains the problem, and the Fixes: tag): I performed a three way histogram with the following commands: echo 'irq_lat u64 lat pid_t pid' > synthetic_events echo 'wake_lat u64 lat u64 irqlat pid_t pid' >> synthetic_events echo 'hist:keys=common_pid:irqts=common_timestamp.usecs if function == 0xffffffff81200580' > events/timer/hrtimer_start/trigger echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$irqts:onmatch(timer.hrtimer_start).irq_lat($lat,pid) if common_flags & 1' > events/sched/sched_waking/trigger echo 'hist:keys=pid:wakets=common_timestamp.usecs,irqlat=lat' > events/synthetic/irq_lat/trigger echo 'hist:keys=next_pid:lat=common_timestamp.usecs-$wakets,irqlat=$irqlat:onmatch(synthetic.irq_lat).wake_lat($lat,$irqlat,next_pid)' > events/sched/sched_switch/trigger echo 1 > events/synthetic/wake_lat/enable Basically I wanted to see: hrtimer_start (calling function tick_sched_timer) Note: # grep tick_sched_timer /proc/kallsyms ffffffff81200580 t tick_sched_timer And save the time of that, and then record sched_waking if it is called in interrupt context and with the same pid as the hrtimer_start, it will record the latency between that and the waking event. I then look at when the task that is woken is scheduled in, and record the latency between the wakeup and the task running. At the end, the wake_lat synthetic event will show the wakeup to scheduled latency, as well as the irq latency in from hritmer_start to the wakeup. The problem is that I found this: <idle>-0 [007] d... 190.485261: wake_lat: lat=27 irqlat=190485230 pid=698 <idle>-0 [005] d... 190.485283: wake_lat: lat=40 irqlat=190485239 pid=10 <idle>-0 [002] d... 190.488327: wake_lat: lat=56 irqlat=190488266 pid=335 <idle>-0 [005] d... 190.489330: wake_lat: lat=64 irqlat=190489262 pid=10 <idle>-0 [003] d... 190.490312: wake_lat: lat=43 irqlat=190490265 pid=77 <idle>-0 [005] d... 190.493322: wake_lat: lat=54 irqlat=190493262 pid=10 <idle>-0 [005] d... 190.497305: wake_lat: lat=35 irqlat=190497267 pid=10 <idle>-0 [005] d... 190.501319: wake_lat: lat=50 irqlat=190501264 pid=10 The irqlat seemed quite large! Investigating this further, if I had enabled the irq_lat synthetic event, I noticed this: <idle>-0 [002] d.s. 249.429308: irq_lat: lat=164968 pid=335 <idle>-0 [002] d... 249.429369: wake_lat: lat=55 irqlat=249429308 pid=335 Notice that the timestamp of the irq_lat "249.429308" is awfully similar to the reported irqlat variable. In fact, all instances were like this. It appeared that: irqlat=$irqlat Wasn't assigning the old $irqlat to the new irqlat variable, but instead was assigning the $irqts to it. The issue is that assigning the old $irqlat to the new irqlat variable creates a variable reference alias, but the alias creation code forgets to make sure the alias uses the same var_ref_idx to access the reference. Link: http://lkml.kernel.org/r/1567375321.5282.12.camel@kernel.org Cc: Linux Trace Devel <linux-trace-devel@vger.kernel.org> Cc: linux-rt-users <linux-rt-users@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: 7e8b88a3 ("tracing: Add hist trigger support for variable reference aliases") Reported-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Tom Zanussi <zanussi@kernel.org> Signed-off-by:
-
Michael Nosthoff authored
commit fe55e770 upstream. when the battery is set to sbs-mode and no gpio detection is enabled "health" is always returning a value even when the battery is not present. All other fields return "not present". This leads to a scenario where the driver is constantly switching between "present" and "not present" state. This generates a lot of constant traffic on the i2c. This commit changes the response of "health" to an error when the battery is not responding leading to a consistent "not present" state. Fixes: 76b16f4c ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats") Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Nosthoff <committed@heine.so> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Michael Nosthoff authored
commit 99956a9e upstream. the type flag is stored in the chip->flags field not in the client->flags field. This currently leads to never using the ti specific health function as client->flags doesn't use that bit. So it's always falling back to the general one. Fixes: 76b16f4c ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats") Cc: <stable@vger.kernel.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Jiaxun Yang authored
commit d2f96554 upstream. Recently, binutils had split Loongson-3 Extensions into four ASEs: MMI, CAM, EXT, EXT2. This patch do the samething in kernel and expose them in cpuinfo so applications can probe supported ASEs at runtime. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Yunqiang Su <ysu@wavecomp.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Gilad Ben-Yossef authored
commit 7a4be6c1 upstream. In case of AEAD decryption verifcation error we were using the wrong value to zero out the plaintext buffer leaving the end of the buffer with the false plaintext. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Fixes: ff27e85a ("crypto: ccree - add AEAD support") CC: stable@vger.kernel.org # v4.17+ Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Gilad Ben-Yossef authored
commit 76a95bd8 upstream. When ccree driver runs it checks the state of the Trusted Execution Environment CryptoCell driver before proceeding. We did not account for cases where the TEE side is not ready or not available at all. Fix it by only considering TEE error state after sync with the TEE side driver. Signed-off-by:
-
Horia Geantă authored
commit 48f89d2a upstream. IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed to be scheduled before the data transfer from ofifo to external memory (set up at [38]: [29] 10FA0004 ld: ind-nfifo (len=4) imm [30] 81F00010 <nfifo_entry: ofifo->class2 type=msg len=16> [31] 14820004 ld: ccb2-datasz len=4 offs=0 imm [32] 00000010 data:0x00000010 [33] 8210010D operation: cls1-op aes cbc init-final enc [34] A8080B04 math: (seqin + math0)->vseqout len=4 [35] 28000010 seqfifold: skip len=16 [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [38] 69300000 seqfifostr: msg len=vseqoutsz [39] 5C20000C seqstr: ccb2 ctx len=12 offs=0 If ofifo -> external memory transfer happens first, DECO will hang (issuing a Watchdog Timeout error, if WDOG is enabled) waiting for data availability in ofifo for the ofifo -> c2 ififo transfer. Make sure IV transfer happens first by waiting for all CAAM internal transfers to end before starting payload transfer. New descriptor with jump command inserted at [37]: [..] [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] A1000401 jump: jsl1 all-match[!nfifopend] offset=[01] local->[38] [38] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [39] 69300000 seqfifostr: msg len=vseqoutsz [40] 5C20000C seqstr: ccb2 ctx len=12 offs=0 [Note: the issue is present in the descriptor from the very beginning (cf. Fixes tag). However I've marked it v4.19+ since it's the oldest maintained kernel that the patch applies clean against.] Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 1acebad3 ("crypto: caam - faster aead implementation") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Wei Yongjun authored
commit c552ffb5 upstream. When using single_open() for opening, single_release() should be used instead of seq_release(), otherwise there is a memory leak. Fixes: 09ae5d37 ("crypto: zip - Add Compression/Decompression statistics") Cc: <stable@vger.kernel.org> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Herbert Xu authored
commit 0ba3c026 upstream. skcipher_walk_done may be called with an error by internal or external callers. For those internal callers we shouldn't unmap pages but for external callers we must unmap any pages that are in use. This patch distinguishes between the two cases by checking whether walk->nbytes is zero or not. For internal callers, we now set walk->nbytes to zero prior to the call. For external callers, walk->nbytes has always been non-zero (as zero is used to indicate the termination of a walk). Reported-by:
-
Alexander Sverdlin authored
commit 1b82feb6 upstream. It seems that smp_processor_id() is only used for a best-effort load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible to disable preemption for the duration of the crypto requests. Therefore, just silence the warning. This commit is similar to e7a9b05c ("crypto: cavium - Fix smp_processor_id() warnings"). Silences the following splat: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904 caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1 ... Call Trace: dump_stack+0x5f/0x86 check_preemption_disabled+0xd3/0xe0 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] skcipher_setkey_ablkcipher+0x2b/0x40 __test_skcipher+0x1f3/0xb20 ? cpumask_next_and+0x26/0x40 ? find_busiest_group+0x10e/0x9d0 ? preempt_count_add+0x49/0xa0 ? try_module_get+0x61/0xf0 ? crypto_mod_get+0x15/0x30 ? __kmalloc+0x1df/0x1f0 ? __crypto_alloc_tfm+0x116/0x180 ? crypto_skcipher_init_tfm+0xa6/0x180 ? crypto_create_tfm+0x4b/0xf0 test_skcipher+0x21/0xa0 alg_test_skcipher+0x3f/0xa0 alg_test.part.6+0x126/0x2a0 ? finish_task_switch+0x21b/0x260 ? __schedule+0x1e9/0x800 ? __wake_up_common+0x8d/0x140 cryptomgr_test+0x40/0x50 kthread+0xff/0x130 ? cryptomgr_notify+0x540/0x540 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x24/0x50 Fixes: ed8ccaef ("crypto: qat - Add support for SRIOV") Cc: stable@vger.kernel.org Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 82a2f884 upstream. The tools/lib/traceevent/Makefile had a test added to it to detect a failure of the "nm" when making the dynamic list file (whatever that is). The problem is that the test sorts the values "U W w" and some versions of sort will place "w" ahead of "W" (even though it has a higher ASCII value, and break the test. Add 'tr "w" "W"' to merge the two and not worry about the ordering. Reported-by:
Tzvetomir Stoyanov <tstoyanov@vmware.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit d84ea212 upstream. Some boards take longer than 5ms to power up after a reset, so allow some retries attempts before giving up. Fixes: ff06d611 ("can: mcp251x: Improve mcp251x_hw_reset()") Cc: linux-stable <stable@vger.kernel.org> Tested-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 677733e2 upstream. The store ordering vs tlbie issue mentioned in commit a5d4b589 ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9") is fixed for Nimbus 2.3 and Cumulus 1.3 revisions. We don't need to apply the fixup if we are running on them We can only do this on PowerNV. On pseries guest with KVM we still don't support redoing the feature fixup after migration. So we should be enabling all the workarounds needed, because whe can possibly migrate between DD 2.3 and DD 2.2 Fixes: a5d4b589 ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190924035254.24612-1-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Alexey Kardashevskiy authored
commit 56090a39 upstream. pnv_tce() returns a pointer to a TCE entry and originally a TCE table would be pre-allocated. For the default case of 2GB window the table needs only a single level and that is fine. However if more levels are requested, it is possible to get a race when 2 threads want a pointer to a TCE entry from the same page of TCEs. This adds cmpxchg to handle the race. Note that once TCE is non-zero, it cannot become zero again. Fixes: a68bd126 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand") CC: stable@vger.kernel.org # v4.19+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Andrew Donnellan authored
commit e7de4f7b upstream. Currently the OPAL symbol map is globally readable, which seems bad as it contains physical addresses. Restrict it to root. Fixes: c8742f85 ("powerpc/powernv: Expose OPAL firmware symbol map") Cc: stable@vger.kernel.org # v3.19+ Suggested-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Santosh Sivaraj authored
commit b5bda626 upstream. schedule_work() cannot be called from MCE exception context as MCE can interrupt even in interrupt disabled context. Fixes: 733e4a4c ("powerpc/mce: hookup memory_failure for UE errors") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Balbir Singh authored
commit 99ead78a upstream. The current code would fail on huge pages addresses, since the shift would be incorrect. Use the correct page shift value returned by __find_linux_pte() to get the correct physical address. The code is more generic and can handle both regular and compound pages. Fixes: ba41e1e1 ("powerpc/mce: Hookup derror (load/store) UE errors") Signed-off-by:
Reza Arbab <arbab@linux.ibm.com> Tested-by:
-
Oleksandr Suvorov authored
commit b1f373a1 upstream. VAG power control is improved to fit the manual [1]. This patch fixes as minimum one bug: if customer muxes Headphone to Line-In right after boot, the VAG power remains off that leads to poor sound quality from line-in. I.e. after boot: - Connect sound source to Line-In jack; - Connect headphone to HP jack; - Run following commands: $ amixer set 'Headphone' 80% $ amixer set 'Headphone Mux' LINE_IN Change VAG power on/off control according to the following algorithm: - turn VAG power ON on the 1st incoming event. - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In). - turn VAG power OFF when there is the latest consumer's pre-down event come. - always delay after VAG power OFF to avoid pop. - delay after VAG power ON if the initiative consumer is Line-In, this prevents pop during line-in muxing. According to the data sheet [1], to avoid any pops/clicks, the outputs should be muted during input/output routing changes. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Cc: stable@vger.kernel.org Fixes: 9b34e6cc ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by:
Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
