- 26 Jan, 2021 4 commits
-
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 defconfig fixes for v5.11 Devicetree patches for SDM845 introduced in v5.11 requires the platform's interconnect driver to be buildin, or the kernel will fail to provide a valid console when we hit userspace. * tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Make INTERCONNECT_QCOM_SDM845 builtin Link: https://lore.kernel.org/r/20210125232412.642834-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 fixes for 5.11 This fixes a regression in Lenovo Yoga C630, where the touchpad in some units stopped working, by re-enabling the "tsc2" device. It also marks the LPASS related clocks as protected to allow DB845c and the Lenovo Yoga C630 to boot even if CONFIG_SDM_LPASSCC_845 is enabled. * tag 'qcom-arm64-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc arm64: dts: qcom: c630: keep both touchpad devices enabled Link: https://lore.kernel.org/r/20210125232039.642565-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm64: dts: amlogic: fixes for v5.11-rc - meson-g12: Set FL-adj property value * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: amlogic: meson-g12: Set FL-adj property value Link: https://lore.kernel.org/r/7hk0s0x3im.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.11, round 1 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix DRC02 uSD card detect polarity - use uSD card detect on DHCOM - Disable uSD WP on DHCOM - Disable TSC2004 on DRC02 - Fix GPIO hogs on DHCOM boards * tag 'stm32-dt-for-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX ARM: dts: stm32: Fix GPIO hog names on DHCOM ARM: dts: stm32: Disable optional TSC2004 on DRC02 board ARM: dts: stm32: Disable WP on DHCOM uSD slot ARM: dts: stm32: Connect card-detect signal on DHCOM ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect Link: https://lore.kernel.org/r/b7379980-857e-736a-85d8-58e2bd300141@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 22 Jan, 2021 6 commits
-
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.11, round 2: - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue. * tag 'imx-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset Link: https://lore.kernel.org/r/20210119091949.GD4356@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Stefan Wahren authored
Change the bcm2835 maintainer info in order to handle subsequent SoCs. After this get_maintainers.pl provides the proper maintainers for irqchip-bcm2836. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Bharat Gooty authored
Add a non-empty dma-ranges so that DMA address translation happens. Fixes: 2013a4b6 ("arm64: dts: broadcom: clear the warnings caused by empty dma-ranges") Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Claudiu Beznea authored
of_match_node() calls __of_match_node() which loops though the entries of matches array. It stops when condition: (matches->name[0] || matches->type[0] || matches->compatible[0]) is false. Thus, add a null entry at the end of at91_soc_allowed_list[] array. Fixes: caab13b4 ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs") Cc: stable@vger.kernel.org #4.12+ Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Sudeep Holla authored
Since at91_soc_init is called unconditionally from atmel_soc_device_init, we get the following warning on all non AT91 SoCs: " AT91: Could not find identification node" Fix the same by filtering with allowed AT91 SoC list. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: stable@vger.kernel.org #4.12+ Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201211135846.1334322-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'optee-rcu-sched-trace-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fix rcu_sched trace from OP-TEE invoke Replaces might_sleep() with a conditional call to cond_resched() in order to avoid the rcu_sched trace in some corner cases. * tag 'optee-rcu-sched-trace-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: replace might_sleep with cond_resched Link: https://lore.kernel.org/r/20210122074234.GA1074747@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 21 Jan, 2021 1 commit
-
-
Rouven Czerwinski authored
might_sleep() is a debugging aid and triggers rescheduling only for certain kernel configurations. Replace with an explicit check and reschedule to work for all kernel configurations. Fixes the following trace: [ 572.945146] rcu: INFO: rcu_sched self-detected stall on CPU [ 572.949275] rcu: 0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974 [ 572.957964] (t=2100 jiffies g=10393 q=21) [ 572.962054] NMI backtrace for cpu 0 [ 572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1 [ 572.971188] Hardware name: STM32 (Device Tree Support) [ 572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14) [ 572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8) [ 572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4) [ 572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130) [ 573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110) [ 573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88) [ 573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c) [ 573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8) [ 573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358) [ 573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc) [ 573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30) [ 573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240) [ 573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44) [ 573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0) [ 573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90) [ 573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90) [ 573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40) [ 573.119732] fce0: ffff0004 00000000 [ 573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000 [ 573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff [ 573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20) [ 573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44) [ 573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154) [ 573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190) [ 573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0) [ 573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c) [ 573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54) [ 573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0) [ 573.205803] ffa0: be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8 [ 573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8 [ 573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8 seen on STM32 DK2 with CONFIG_PREEMPT_NONE. Fixes: 9f02b8f6 ("tee: optee: add might_sleep for RPC requests") Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> [jw: added fixes tag + small adjustments in the code] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-
- 18 Jan, 2021 5 commits
-
-
Randy Dunlap authored
Fix build error in firmware/imx/ selecting SOC_BUS. riscv32-linux-ld: drivers/firmware/imx/imx-scu-soc.o: in function `.L9': imx-scu-soc.c:(.text+0x1b0): undefined reference to `soc_device_register' Fixes: edbee095 ("firmware: imx: add SCU firmware driver support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jacky Bai authored
On i.MX8MP, The GPIO3's secondary gpio-ranges's 'gpio controller offset' cell value should be 26, so correct it. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Fixes: 6d9b8d20 ("arm64: dts: freescale: Add i.MX8MP dtsi support") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Russell King authored
The PHY address bit 2 is configured by the LED pin. Attaching a LED to this pin is not sufficient to guarantee this configuration pin is correctly read. This leads to some platforms having their PHY at address 0 and others at address 4. If there is no phy-handle specified, the FEC driver will scan the PHY bus for a PHY and use that. Consequently, adding the DT configuration of the PHY and the phy properties to the FEC driver broke some boards. Fix this by removing the phy-handle property, and listing two PHY entries for both possible PHY addresses, so that the DT configuration for the PHY can be found by the PHY driver. Fixes: 86b08bd5 ("ARM: dts: imx6-sr-som: add ethernet PHY configuration") Reported-by: Christoph Mattheis <christoph.mattheis@arcor.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Max Krummenacher authored
When the kernel is configured to use the Thumb-2 instruction set "suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL (i.MX 6ULL) and Apalis iMX6 (i.MX 6Q). It looks like the CPU resumes unconditionally in ARM instruction mode and then chokes on the presented Thumb-2 code it should execute. Fix this by using the arm instruction set for all code in suspend-imx6.S. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Fixes: df595746 ("ARM: imx: add suspend in ocram support for i.mx6q") Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bruno Thomsen authored
RTC pcf2127 device driver has changed default behaviour of the watchdog feature in v5.11-rc1. Now you need to explicitly enable it with a device tree property, "reset-source", when used in the board design. Fixes: 71ac1345 ("rtc: pcf2127: only use watchdog when explicitly available") Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: Bruno Thomsen <bth@kamstrup.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 15 Jan, 2021 4 commits
-
-
Linus Walleij authored
The Ux500 platforms have some memory carveouts set aside for communicating with the modem and for the initial secure software (ISSW). These areas are protected by the memory controller and will result in an external abort if accessed like common read/write memory. On the legacy boot loaders, these were set aside by using cmdline arguments such as this: mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M mem=638M@385M Reserve the relevant areas in the device tree instead. The "mali", "hwmem", "mem_ram_console" and the trailing 1MB at the end of the memory reservations in the list are not relevant for the upstream kernel as these are nowadays replaced with upstream technologies such as CMA. The modem and ISSW reservations are necessary. This was manifested in a bug that surfaced in response to commit 7fef431b ("mm/page_alloc: place pages to tail in __free_pages_core()") which changes the behaviour of memory allocations in such a way that the platform will sooner run into these dangerous areas, with "Unhandled fault: imprecise external abort (0xc06) at 0xb6fd83dc" or similar: the real reason turns out to be that the PTE is pointing right into one of the reserved memory areas. We were just lucky until now. We need to augment the DB8500 and DB8520 SoCs similarly and also create a new include for the DB9500 used in the Snowball since this does not have a modem and thus does not need the modem memory reservation, albeit it needs the ISSW reservation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Cc: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Nishanth Menon authored
With [1] integrated and all users of the config symbols removed, we can safely remove the options from defconfig. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20201026170624.24241-1-nm@ti.com/Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210107132228.6577-1-nm@ti.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Sumera Priyadarsini authored
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in arm-integrator-lm.c by inserting of_node_put() before a return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200829174154.GA9319@Kaladin Link: https://lore.kernel.org/r/20210112092549.251548-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.11: - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from #pwm-cells conversion. - Fix duplicated bus node name for i.MX8MN SoC. - Fix reset register offset on LS1028A SoC. - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device index consistent with previous kernel version. - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure with i.MX8M SoC driver. - Fix typos with status property on imx6qdl-kontron-samx6i board. - Fix duplicated regulator-name on imx6qdl-gw52xx board. * tag 'imx-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status ARM: imx: fix imx8m dependencies ARM: dts: tbs2910: rename MMC node aliases arm64: dts: ls1028a: fix the offset of the reset register arm64: dts: imx8mn: Fix duplicate node name ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight Link: https://lore.kernel.org/r/20210112131224.GI28365@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 14 Jan, 2021 7 commits
-
-
Marek Vasut authored
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the correctness of the DT. Fixes: fde180f0 ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and using output-low DT property leads to the GPIO being set high instead. Fixes: ac68793f ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The GPIO hog node name should match regex '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', make it so and fix the following two make dtbs_check warnings: arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dt.yaml: hog-usb-port-power: $nodename:0: 'hog-usb-port-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: hog-usb-hub: $nodename:0: 'hog-usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' Fixes: ac68793f ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The DRC02 has no use for the on-SoM touchscreen controller, and the on-SoM touchscreen controller may not even be populated, which then results in error messages in kernel log. Disable the touchscreen controller in DT. Fixes: fde180f0 ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The uSD slot has no WP detection, disable it. Fixes: 34e0c784 ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1, describe it in the DT. Fixes: 34e0c784 ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The uSD card detect signal on the DH DRC02 is active-high, with a default pull down resistor on the board. Invert the polarity. Fixes: fde180f0 ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org -- Note that this could not be tested on prototype SoMs, now that it is tested, this issue surfaced, so it needs to be fixed. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
- 13 Jan, 2021 1 commit
-
-
Bjorn Andersson authored
The GCC_LPASS_Q6_AXI_CLK and GCC_LPASS_SWAY_CLK clocks may not be touched on a typical UEFI based SDM845 device, but when the kernel is built with CONFIG_SDM_LPASSCC_845 this happens, unless they are marked as protected-clocks in the DT. This was done for the MTP and the Pocophone, but not for DB845c and the Lenovo Yoga C630 - causing these to fail to boot if the LPASS clock controller is enabled (which it typically isn't). Tested-by: Vinod Koul <vkoul@kernel.org> #on db845c Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201222001103.3112306-1-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-
- 11 Jan, 2021 4 commits
-
-
Koen Vandeputte authored
2 regulator descriptions carry identical naming. This leads to following boot warning: [ 0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present! Fix this by renaming the one used for audio. Fixes: 5051bff3 ("ARM: dts: imx: ventana: add LTC3676 PMIC support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marco Felsch authored
Fix typo so the gpio i2c busses are really disabled. Fixes: 21252127 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Arnd Bergmann authored
Selecting ARM_GIC_V3 on non-CP15 processors leads to build failures like arch/arm/include/asm/arch_gicv3.h: In function 'write_ICC_AP1R3_EL1': arch/arm/include/asm/arch_gicv3.h:36:40: error: 'c12' undeclared (first use in this function) 36 | #define __ICC_AP1Rx(x) __ACCESS_CP15(c12, 0, c9, x) | ^~~ Add a dependency to only enable the gic driver when building for at an ARMv7 target, which is the closes approximation to the ARMv8 processor that is actually in this chip. Fixes: fc40200e ("soc: imx: increase build coverage for imx8m soc driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Soeren Moch authored
to be consistent with kernel versions up to v5.9 (mmc aliases not used here). usdhc1 is not wired up on this board and therefore cannot be used. Start mmc aliases with usdhc2. Signed-off-by: Soeren Moch <smoch@web.de> Cc: stable@vger.kernel.org # 5.10.x Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 10 Jan, 2021 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Search for <ncurses.h> in the default header path of HOSTCC - Tweak the option order to be kind to old BSD awk - Remove 'kvmconfig' and 'xenconfig' shorthands - Fix documentation * tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: kbuild: Fix section reference kconfig: remove 'kvmconfig' and 'xenconfig' shorthands lib/raid6: Let $(UNROLL) rules work with macOS userland kconfig: Support building mconf with vendor sysroot ncurses kconfig: config script: add a little user help MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is two driver fixes (megaraid_sas and hisi_sas). The megaraid one is a revert of a previous revert of a cpu hotplug fix which exposed a bug in the block layer which has been fixed in this merge window. The hisi_sas performance enhancement comes from switching to interrupt managed completion queues, which depended on the addition of devm_platform_get_irqs_affinity() which is now upstream via the irq tree in the last merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Expose HW queues for v2 hw Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Missing CRC32 selections (Arnd) - Fix for a merge window regression with bdev inode init (Christoph) - bcache fixes - rnbd fixes - NVMe pull request from Christoph: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im) - Use-after-free fix for partition iteration (Ming) - Missing blk-mq debugfs flag annotation (John) - Bdev freeze regression fix (Satya) - blk-iocost NULL pointer deref fix (Tejun) * tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits) bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket bcache: check unsupported feature sets for bcache register bcache: fix typo from SUUP to SUPP in features.h bcache: set pdev_set_uuid before scond loop iteration blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED block/rnbd-clt: avoid module unload race with close confirmation block/rnbd: Adding name to the Contributors List block/rnbd-clt: Fix sg table use after free block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close block/rnbd: Select SG_POOL for RNBD_CLIENT block: pre-initialize struct block_device in bdev_alloc_inode fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A bit larger than I had hoped at this point, but it's all changes that will be directed towards stable anyway. In detail: - Fix a merge window regression on error return (Matthew) - Remove useless variable declaration/assignment (Ye Bin) - IOPOLL fixes (Pavel) - Exit and cancelation fixes (Pavel) - fasync lockdep complaint fix (Pavel) - Ensure SQPOLL is synchronized with creator life time (Pavel)" * tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block: io_uring: stop SQPOLL submit on creator's death io_uring: add warn_once for io_uring_flush() io_uring: inline io_uring_attempt_task_drop() io_uring: io_rw_reissue lockdep annotations io_uring: synchronise ev_posted() with waitqueues io_uring: dont kill fasync under completion_lock io_uring: trigger eventfd for IOPOLL io_uring: Fix return value from alloc_fixed_file_ref_node io_uring: Delete useless variable ‘id’ in io_prep_async_work io_uring: cancel more aggressively in exit_work io_uring: drop file refs after task cancel io_uring: patch up IOPOLL overflow_flush sync io_uring: synchronise IOPOLL on task_submit fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.11-rc3. Include in here are: - USB gadget driver fixes for reported issues - new usb-serial driver ids - dma from stack bugfixes - typec bugfixes - dwc3 bugfixes - xhci driver bugfixes - other small misc usb driver bugfixes All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: dwc3: gadget: Clear wait flag on dequeue usb: typec: Send uevent for num_altmodes update usb: typec: Fix copy paste error for NVIDIA alt-mode description usb: gadget: enable super speed plus kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb usb: uas: Add PNY USB Portable SSD to unusual_uas usb: gadget: configfs: Preserve function ordering after bind failure usb: gadget: select CONFIG_CRC32 usb: gadget: core: change the comment for usb_gadget_connect usb: gadget: configfs: Fix use-after-free issue with udc_name usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup usb: usbip: vhci_hcd: protect shift size USB: usblp: fix DMA to stack USB: serial: iuu_phoenix: fix DMA from stack USB: serial: option: add LongSung M5710 module support USB: serial: option: add Quectel EM160R-GL USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug usb: gadget: f_uac2: reset wMaxPacketSize usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.11-rc3. Nothing major, just resolving some reported issues: - cleanup some remaining mentions of the ION drivers that were removed in 5.11-rc1 - comedi driver bugfix - two error path memory leak fixes All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ION: remove some references to CONFIG_ION staging: mt7621-dma: Fix a resource leak in an error handling path Staging: comedi: Return -EFAULT if copy_to_user() fails staging: spmi: hisi-spmi-controller: Fix some error handling paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ...
-