- 05 May, 2014 5 commits
-
-
Dan Carpenter authored
commit b2a72ec3 upstream. qla2x00_mem_alloc() returns 1 on success and -ENOMEM on failure. On the one hand the caller assumes non-zero is success but on the other hand the caller also assumes that it returns an error code. I've fixed it to return zero on success and a negative error code on failure. This matches the documentation as well. [jejb: checkpatch fix] Fixes: e315cd28 ('[SCSI] qla2xxx: Code changes for qla data structure refactoring') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Igor Gnatenko authored
commit 6db249eb upstream. After suspend another Renesas PCI-X USB 3.0 card doesn't work. [root@fedora-20 ~]# lspci -vmnnd 1912: Device: 03:00.0 Class: USB controller [0c03] Vendor: Renesas Technology Corp. [1912] Device: uPD720202 USB 3.0 Host Controller [0015] SVendor: Renesas Technology Corp. [1912] SDevice: uPD720202 USB 3.0 Host Controller [0015] Rev: 02 ProgIf: 30 This patch should be applied to stable kernel 3.14 that contain the commit 1aa9578c "xhci: Fix resume issues on Renesas chips in Samsung laptops" Reported-and-tested-by:
Anatoly Kharchenko <rfr-bugs@yandex.ru> Reference: http://redmine.russianfedora.pro/issues/1315Signed-off-by:
Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Nishanth Menon authored
commit 07484ca3 upstream. Just like IS_PM34XX_ERRATUM, IS_PM44XX_ERRATUM is valid only if CONFIG_PM is enabled, else, disabling CONFIG_PM results in build failure complaining about the following: arch/arm/mach-omap2/built-in.o: In function `omap4_boot_secondary': :(.text+0x8a70): undefined reference to `pm44xx_errata' Fixes: c9621844 (ARM: OMAP4: PM: add errata support) Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.ocm> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Roger Quadros authored
commit c6c56697 upstream. OMAP3 doesn't contain "l3_init_clkdm" clock domain. Use the proper clock domains for USB Host and USB TLL modules. Gets rid of the following warnings during boot omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm Reported-by:
Roger Quadros <rogerq@ti.com> Fixes: de231388 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Partha Basak <parthab@india.ti.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Thomas Petazzoni authored
commit a6e03dd4 upstream. The mvmdio driver accesses some register of the Ethernet unit. It therefore takes a reference and enables a clock. However, on Armada 370/XP, no clock specification was given in the Device Tree, which leads the mvmdio driver to fail when being used as a module and loaded before the mvneta driver: it tries to access a register from a hardware unit that isn't clocked. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1395790439-21332-2-git-send-email-thomas.petazzoni@free-electrons.comAcked-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> [ luis: backported to 3.11: adjusted context ] Signed-off-by:
-
- 02 May, 2014 3 commits
-
-
Christopher Covington authored
commit 95c52fe0 upstream. The kcmp system call was ported to ARM in commit 3f7d1fe1 "ARM: 7665/1: Wire up kcmp syscall". Fixes: 3f7d1fe1 ("ARM: 7665/1: Wire up kcmp syscall") Signed-off-by:
Christopher Covington <cov@codeaurora.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Tedd Ho-Jeong An authored
commit ef4e5e4a upstream. This patch adds support for new Intel Bluetooth device. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a2a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Petr Mladek authored
commit 12729f14 upstream. If a failure occurs while modifying ftrace function, it bails out and will remove the tracepoints to be back to what the code originally was. There is missing the final sync run across the CPUs after the fix up is done and before the ftrace int3 handler flag is reset. Here's the description of the problem: CPU0 CPU1 ---- ---- remove_breakpoint(); modifying_ftrace_code = 0; [still sees breakpoint] <takes trap> [sees modifying_ftrace_code as zero] [no breakpoint handler] [goto failed case] [trap exception - kernel breakpoint, no handler] BUG() Link: http://lkml.kernel.org/r/1393258342-29978-2-git-send-email-pmladek@suse.cz Fixes: 8a4d0a68 "ftrace: Use breakpoint method to update ftrace caller" Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
Petr Mladek <pmladek@suse.cz> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 30 Apr, 2014 3 commits
-
-
Chew, Kean ho authored
commit 1b31e9b7 upstream. Add Device ID of Intel BayTrail SMBus Controller. Signed-off-by:
Chew, Kean ho <kean.ho.chew@intel.com> Signed-off-by:
Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: Rebecca Swee Fun Chang <rebecca.swee.fun.chang@intel.com> Signed-off-by:
-
James Ralston authored
commit afc65924 upstream. This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Tim Chen authored
commit 130fa5bc upstream. The crypto algorithm modules utilizing the crypto daemon could be used early when the system start up. Using module_init does not guarantee that the daemon's work queue is initialized when the cypto alorithm depending on crypto_wq starts. It is necessary to initialize the crypto work queue earlier at the subsystem init time to make sure that it is initialized when used. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 29 Apr, 2014 29 commits
-
-
Bjørn Mork authored
commit 34f972d6 upstream. A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit dd6b48ec upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by:
-
Bjørn Mork authored
commit 533b3994 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by:
Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by:
-
Bjørn Mork authored
commit bce4f588 upstream. Signed-off-by:
-
Bjørn Mork authored
commit 70a3615f upstream. Signed-off-by:
-
Bjørn Mork authored
commit a00986f8 upstream. Signed-off-by:
-
Johan Hovold authored
commit 5509076d upstream. During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by:
Ludovic Drolez <ldrolez@debian.org> Tested-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
David Cohen authored
commit 01bb59eb upstream. When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841 "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
Denis Turischev authored
commit c09ec25d upstream. The same issue like with Panther Point chipsets. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS have work around for this, but not all. One example is Compulab's mini-desktop, the Intense-PC2. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. This patch should be backported to stable kernels as old as 3.12, that contain the commit 638298dc "xhci: Fix spurious wakeups after S5 on Haswell" Signed-off-by:
Denis Turischev <denis@compulab.co.il> Signed-off-by:
-
Julius Werner authored
commit 1f81b6d2 upstream. We have observed a rare cycle state desync bug after Set TR Dequeue Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that doesn't fetch new TRBs and thus an unresponsive USB device). It always triggers when a previous Set TR Dequeue Pointer command has set the pointer to the final Link TRB of a segment, and then another URB gets enqueued and cancelled again before it can be completed. Further investigation showed that the xHC had returned the Link TRB in the TRB Pointer field of the Transfer Event (CC == Stopped -- Length Invalid), but when xhci_find_new_dequeue_state() later accesses the Endpoint Context's TR Dequeue Pointer field it is set to the first TRB of the next segment. The driver expects those two values to be the same in this situation, and uses the cycle state of the latter together with the address of the former. This should be fine according to the XHCI specification, since the endpoint ring should be stopped when returning the Transfer Event and thus should not advance over the Link TRB before it gets restarted. However, real-world XHCI implementations apparently don't really care that much about these details, so the driver should follow a more defensive approach to try to work around HC spec violations. This patch removes the stopped_trb variable that had been used to store the TRB Pointer from the last Transfer Event of a stopped TRB. Instead, xhci_find_new_dequeue_state() now relies only on the Endpoint Context, requiring a small amount of additional processing to find the virtual address corresponding to the TR Dequeue Pointer. Some other parts of the function were slightly rearranged to better fit into this model. This patch should be backported to kernels as old as 2.6.31 that contain the commit ae636747 "USB: xhci: URB cancellation support." Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
-
Miao Xie authored
commit 1c70d8fb upstream. Currently, with inode cache enabled, we will reuse its inode id immediately after unlinking file, we may hit something like following: |->iput inode |->return inode id into inode cache |->create dir,fsync |->power off An easy way to reproduce this problem is: mkfs.btrfs -f /dev/sdb mount /dev/sdb /mnt -o inode_cache,commit=100 dd if=/dev/zero of=/mnt/data bs=1M count=10 oflag=sync inode_id=`ls -i /mnt/data | awk '{print $1}'` rm -f /mnt/data i=1 while [ 1 ] do mkdir /mnt/dir_$i test1=`stat /mnt/dir_$i | grep Inode: | awk '{print $4}'` if [ $test1 -eq $inode_id ] then dd if=/dev/zero of=/mnt/dir_$i/data bs=1M count=1 oflag=sync echo b > /proc/sysrq-trigger fi sleep 1 i=$(($i+1)) done mount /dev/sdb /mnt umount /dev/sdb btrfs check /dev/sdb We fix this problem by adding unlinked inode's id into pinned tree, and we can not reuse them until committing transaction. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
Chris Mason <clm@fb.com> [ luis: backported to 3.11: adjusted context ] Signed-off-by:
-
Loic Poulain authored
commit f8fd1b03 upstream. __dma_tx_complete is not protected against concurrent call of serial8250_tx_dma. it can lead to circular tail index corruption or parallel call of serial_tx_dma on the same data portion. This patch fixes this issue by holding the port lock. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Loic Poulain authored
commit b08c9c31 upstream. On transmit-hold-register empty, serial8250_tx_chars should be called only if we don't use DMA. DMA has its own tx cycle. Signed-off-by:
-
Johan Hovold authored
commit 10164c2a upstream. Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by:
-
Liu Hua authored
commit 56b700fd upstream. For vmcore generated by LPAE enabled kernel, user space utility such as crash needs additional infomation to parse. So this patch add arch_crash_save_vmcoreinfo as what PAE enabled i386 linux does. Reviewed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Liu Hua <sdu.liu@huawei.com> Signed-off-by:
-
Xiangyu Lu authored
commit 80bb3ef1 upstream. In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Alex Wu <wuquanming@huawei.com> Signed-off-by:
Xiangyu Lu <luxiangyu@huawei.com> Signed-off-by:
-
Linus Torvalds authored
commit 1b17844b upstream. fixup_user_fault() is used by the futex code when the direct user access fails, and the futex code wants it to either map in the page in a usable form or return an error. It relied on handle_mm_fault() to map the page, and correctly checked the error return from that, but while that does map the page, it doesn't actually guarantee that the page will be mapped with sufficient permissions to be then accessed. So do the appropriate tests of the vma access rights by hand. [ Side note: arguably handle_mm_fault() could just do that itself, but we have traditionally done it in the caller, because some callers - notably get_user_pages() - have been able to access pages even when they are mapped with PROT_NONE. Maybe we should re-visit that design decision, but in the meantime this is the minimal patch. ] Found by Dave Jones running his trinity tool. Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Deucher authored
commit e9a4099a upstream. Some newer PX laptops have the pci device class set to DISPLAY_OTHER rather than DISPLAY_VGA. This properly detects ATPX on those laptops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: airlied@gmail.com Signed-off-by:
-
Alex Deucher authored
commit 3ed9a335 upstream. Avoids a crash in certain cases when thermal irqs are generated before the display structures have been initialized. v2: fix the vblank and vrefresh helpers as well bug: https://bugzilla.kernel.org/show_bug.cgi?id=73931Signed-off-by:
-
Alex Deucher authored
commit 7e95cfb0 upstream. Should be 5 rather than 4. Noticed-by:
Mathias Fröhlich <Mathias.Froehlich@gmx.net> Signed-off-by:
Christian König <christian.koenig@amd.com> [ luis: backported to 3.11: - cik_sdma_ring_test() defined in cik.c instead of cik_sdma.c ] Signed-off-by:
-
Hans de Goede authored
commit 46a2986e upstream. We expect that all the Haswell series will need such quirks, sigh. The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad, with the same min/max issue. The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation. The X1 and T431s share a PnPID with the T540p, but the reported ranges are closer to those of the T440s. HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me, S1 Yoga and X1 are written by Benjamin Tissoires. Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the X240, X1 uses the same touchpad as the T440. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dan Williams authored
commit 8a4aeec8 upstream. The AHCI spec allows implementations to issue commands in tag order rather than FIFO order: 5.3.2.12 P:SelectCmd HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1) or HBA selects the command to issue that has had the PxCI bit set to '1' longer than any other command pending to be issued. The result is that commands posted sequentially (time-wise) may play out of sequence when issued by hardware. This behavior has likely been hidden by drives that arrange for commands to complete in issue order. However, it appears recent drives (two from different vendors that we have found so far) inflict out-of-order completions as a matter of course. So, we need to take care to maintain ordered submission, otherwise we risk triggering a drive to fall out of sequential-io automation and back to random-io processing, which incurs large latency and degrades throughput. This issue was found in simple benchmarks where QD=2 seq-write performance was 30-50% *greater* than QD=32 seq-write performance. Tagging for -stable and making the change globally since it has a low risk-to-reward ratio. Also, word is that recent versions of an unnamed OS also does it this way now. So, drives in the field are already experienced with this tag ordering scheme. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ed Ciechanowski <ed.ciechanowski@intel.com> Reviewed-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Alexander Gordeev authored
commit 2cf532f5 upstream. In multiple MSI mode all AHCI ports (including dummy) get assigned separate MSI vectors and (as result of execution pci_enable_msi_exact() function) separate IRQ numbers, (mapped to the MSI vectors). Therefore, although interrupts from dummy ports are not desired they are still enabled. We do not request IRQs for dummy ports, but that only means we do not assign AHCI-specific ISRs to corresponding IRQ numbers. As result, dummy port interrupts still could come and traverse all the way from the PCI device to the kernel, causing unnecessary overhead. This update disables IRQs for dummy ports and prevents the described issue. Signed-off-by:
Alexander Gordeev <agordeev@redhat.com> Signed-off-by:
David Milburn <dmilburn@redhat.com> Cc: linux-ide@vger.kernel.org Fixes: 5ca72c4f ("AHCI: Support multiple MSIs") Signed-off-by:
-
Jeff Layton authored
commit 3758cf7e upstream. ...otherwise the logic in the timeout handling doesn't work correctly. Spotted-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 8db6e510 upstream. After hotplugging CPU1 the first call of interrupt handler for CPU1 oneshot timer was called on CPU0 because it fired before setting IRQ affinity. Affected are SoCs where Multi Core Timer interrupts are shared (SPI), e.g. Exynos 4210. During setup of the MCT timers the clock event device should be registered after setting the affinity for interrupt. This will prevent starting the timer too early. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com>, Cc: Daniel Lezcano <daniel.lezcano@linaro.org>, Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-arm-kernel@lists.infradead.org, Link: http://lkml.kernel.org/r/20140416143316.299247848@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
commit ffde1de6 upstream. To support the affinity setting of per cpu timers in the early startup of a not yet online cpu, implement the force logic, which disables the cpu online check. Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Signed-off-by:
-
Thomas Gleixner authored
commit 01f8fa4f upstream. The current implementation of irq_set_affinity() refuses rightfully to route an interrupt to an offline cpu. But there is a special case, where this is actually desired. Some of the ARM SoCs have per cpu timers which require setting the affinity during cpu startup where the cpu is not yet in the online mask. If we can't do that, then the local timer interrupt for the about to become online cpu is routed to some random online cpu. The developers of the affected machines tried to work around that issue, but that results in a massive mess in that timer code. We have a yet unused argument in the set_affinity callbacks of the irq chips, which I added back then for a similar reason. It was never required so it got not used. But I'm happy that I never removed it. That allows us to implement a sane handling of the above scenario. So the affected SoC drivers can add the required force handling to their interrupt chip, switch the timer code to irq_force_affinity() and things just work. This does not affect any existing user of irq_set_affinity(). Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Reported-and-tested-by:
-
David Milburn authored
commit 9ae794ac upstream. System may crash in ahci_hw_interrupt() or ahci_thread_fn() when accessing the interrupt status in a port's private_data if the port is actually a DUMMY port. 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller <snip console output for linux-3.15-rc1> [ 9.352080] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode [ 9.352084] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 9.368155] Console: switching to colour frame buffer device 128x48 [ 9.439759] mgag200 0000:11:00.0: fb0: mgadrmfb frame buffer device [ 9.446765] mgag200 0000:11:00.0: registered panic notifier [ 9.470166] scsi1 : ahci [ 9.479166] scsi2 : ahci [ 9.488172] scsi3 : ahci [ 9.497174] scsi4 : ahci [ 9.506175] scsi5 : ahci [ 9.515174] scsi6 : ahci [ 9.518181] ata1: SATA max UDMA/133 abar m2048@0x95c00000 port 0x95c00100 irq 91 [ 9.526448] ata2: DUMMY [ 9.529182] ata3: DUMMY [ 9.531916] ata4: DUMMY [ 9.534650] ata5: DUMMY [ 9.537382] ata6: DUMMY [ 9.576196] [drm] Initialized mgag200 1.0.0 20110418 for 0000:11:00.0 on minor 0 [ 9.845257] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.865161] ata1.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100 [ 9.891407] ata1.00: configured for UDMA/100 [ 9.900525] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5 [ 10.247399] iTCO_vendor_support: vendor-support=0 [ 10.261572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.269764] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.301932] sd 0:2:0:0: [sda] 570310656 512-byte logical blocks: (291 GB/271 GiB) [ 10.317085] sd 0:2:0:0: [sda] Write Protect is off [ 10.328326] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 10.375452] BUG: unable to handle kernel NULL pointer dereference at 000000000000003c [ 10.384217] IP: [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.392101] PGD 0 [ 10.394353] Oops: 0000 [#1] SMP [ 10.397978] Modules linked in: sr_mod(+) cdrom sd_mod iTCO_wdt crc_t10dif iTCO_vendor_support crct10dif_common ahci libahci libata lpc_ich mfd_core mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm i2c_core megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 10.426499] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1 #1 [ 10.433495] Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011 [ 10.443886] task: ffffffff81906460 ti: ffffffff818f0000 task.ti: ffffffff818f0000 [ 10.452239] RIP: 0010:[<ffffffffa0133df0>] [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.462838] RSP: 0018:ffff880033c03d98 EFLAGS: 00010046 [ 10.468767] RAX: 0000000000a400a4 RBX: ffff880029a6bc18 RCX: 00000000fffffffa [ 10.476731] RDX: 00000000000000a4 RSI: ffff880029bb0000 RDI: ffff880029a6bc18 [ 10.484696] RBP: ffff880033c03dc8 R08: 0000000000000000 R09: ffff88002f800490 [ 10.492661] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000000 [ 10.500625] R13: ffff880029a6bd98 R14: 0000000000000000 R15: ffffc90000194000 [ 10.508590] FS: 0000000000000000(0000) GS:ffff880033c00000(0000) knlGS:0000000000000000 [ 10.517623] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 10.524035] CR2: 000000000000003c CR3: 00000000328ff000 CR4: 00000000000007b0 [ 10.531999] Stack: [ 10.534241] 0000000000000017 ffff880031ba7d00 000000000000005c ffff880031ba7d00 [ 10.542535] 0000000000000000 000000000000005c ffff880033c03e10 ffffffff810c2a1e [ 10.550827] ffff880031ae2900 000000008108fb4f ffff880031ae2900 ffff880031ae2984 [ 10.559121] Call Trace: [ 10.561849] <IRQ> [ 10.563994] [<ffffffff810c2a1e>] handle_irq_event_percpu+0x3e/0x1a0 [ 10.571309] [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60 [ 10.577631] [<ffffffff810c4fdd>] try_one_irq.isra.6+0x8d/0xf0 [ 10.584142] [<ffffffff810c5313>] note_interrupt+0x173/0x1f0 [ 10.590460] [<ffffffff810c2a8e>] handle_irq_event_percpu+0xae/0x1a0 [ 10.597554] [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60 [ 10.603872] [<ffffffff810c5727>] handle_edge_irq+0x77/0x130 [ 10.610199] [<ffffffff81014b8f>] handle_irq+0xbf/0x150 [ 10.616040] [<ffffffff8109ff4e>] ? vtime_account_idle+0xe/0x50 [ 10.622654] [<ffffffff815fca1a>] ? atomic_notifier_call_chain+0x1a/0x20 [ 10.630140] [<ffffffff816038cf>] do_IRQ+0x4f/0xf0 [ 10.635490] [<ffffffff815f8aed>] common_interrupt+0x6d/0x6d [ 10.641805] <EOI> [ 10.643950] [<ffffffff8149ca9f>] ? cpuidle_enter_state+0x4f/0xc0 [ 10.650972] [<ffffffff8149ca98>] ? cpuidle_enter_state+0x48/0xc0 [ 10.657775] [<ffffffff8149cb47>] cpuidle_enter+0x17/0x20 [ 10.663807] [<ffffffff810b0070>] cpu_startup_entry+0x2c0/0x3d0 [ 10.670423] [<ffffffff815dfcc7>] rest_init+0x77/0x80 [ 10.676065] [<ffffffff81a60f47>] start_kernel+0x40f/0x41a [ 10.682190] [<ffffffff81a60941>] ? repair_env_string+0x5c/0x5c [ 10.688799] [<ffffffff81a60120>] ? early_idt_handlers+0x120/0x120 [ 10.695699] [<ffffffff81a605ee>] x86_64_start_reservations+0x2a/0x2c [ 10.702889] [<ffffffff81a60733>] x86_64_start_kernel+0x143/0x152 [ 10.709689] Code: a0 fc ff 85 c0 8b 4d d4 74 c3 48 8b 7b 08 89 ca 48 c7 c6 60 66 13 a0 31 c0 e8 9d 70 28 e1 8b 4d d4 eb aa 0f 1f 84 00 00 00 00 00 <45> 8b 64 24 3c 48 89 df e8 23 47 4c e1 41 83 fc 01 19 c0 48 83 [ 10.731470] RIP [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.739441] RSP <ffff880033c03d98> [ 10.743333] CR2: 000000000000003c [ 10.747032] ---[ end trace b6e82636970e2690 ]--- [ 10.760190] Kernel panic - not syncing: Fatal exception in interrupt [ 10.767291] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Cc: Alexander Gordeev <agordeev@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-of-by:
-
Roger Quadros authored
commit 9c1b7036 upstream. It was impossible to enumerate on a SuperSpeed (XHCI) host with alternate setting = 1 due to the wrongly set 'bMaxBurst' field in the SuperSpeed Endpoint Companion descriptor. Testcase: <host> modprobe -r usbtest; modprobe usbtest alt=1 <device> modprobe g_zero plug device to SuperSpeed port on the host. Without this patch the host always complains like so "usb 12-2: Not enough bandwidth for new device state. usb 12-2: Not enough bandwidth for altsetting 1" Bug was introduced by commit cf9a08ae in v3.9 Fixes: cf9a08ae (usb: gadget: convert source sink and loopback to new function interface) Reviewed-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
