- 17 Nov, 2022 21 commits
-
-
Lukas Bulwahn authored
Commit dd5c672d ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA") removes config ARCH_BCM4908 as config ARCH_BCMBCA has the same intent. Probably due to concurrent development, commit 002181f5 ("mtd: parsers: add Broadcom's U-Boot parser") introduces 'Broadcom's U-Boot partition parser' that depends on ARCH_BCM4908, but this use was not visible during the config refactoring from the commit above. Hence, these two changes create a reference to a non-existing config symbol. Adjust the MTD_BRCM_U_BOOT definition to refer to ARCH_BCMBCA instead of ARCH_BCM4908 to remove the reference to the non-existing config symbol ARCH_BCM4908. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221116124932.4748-1-lukas.bulwahn@gmail.com
-
Rob Herring authored
The schema for 'sercomm,scpart-id' is broken. The 'if' condition is never true because 'compatible' is in the parent node, not the child node the sub-schema applies to. The example passes as there are no constraints on additional/unevaluated properties. That's a secondary issue which is complicated due to nested partitions. Drop the if/then schema and the unnecessary 'allOf' so that the 'sercomm,scpart-id' property is at least defined. Cc: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Miquel Raynal authored
As recently requested by the binding maintaines, let's use 4 spaces in the examples. Signed-off-by:
-
Miquel Raynal authored
Setting an object type is redundant when a reference is made, so drop these useless lines. Signed-off-by:
-
Miquel Raynal authored
In most cases we try to avoid it but in some cases this is needed. Clarify why by adding a small comment. Signed-off-by:
-
Miquel Raynal authored
The aim of MTD nvmem-cells is to treat MTD partitions as NVMEM providers. Hence, MTD partition properties are valid here. Let's reference mtd/partition.yaml which gives us a chance to drop "additionalProperties: true" in favor of "unevaluatedProperties: false". Signed-off-by:
-
Miquel Raynal authored
Memory mapped devices such as parallel NOR flash could make use of the 'ranges' property to translate a nvmem 'reg' cell address to a CPU address but in practice there is no upstream user nor any declaration of this property being valid in this case yet, leading to a warning when constraining a bit more the schema: .../mtd/partitions/nvmem-cells.example.dtb: calibration@f00000: Unevaluated properties are not allowed ('ranges' was unexpected) So let's drop the property from the example, knowing that someone might actually properly define it some day. Signed-off-by: -
Miquel Raynal authored
As described in dd638202 ("dt-bindings: mtd: partitions: add additional example for qcom,smem-part"), the aim of documenting the subnodes was to be able to declare nvmem cells. Hence, the partition property does not really apply directly here, let's instead reference nvmem-cells.yaml first. Signed-off-by:
-
Miquel Raynal authored
Parser compatibles cannot be used anywhere, and the list is limited. In order to constrain this list, enumerate them all under the top "partitions" subnode. New parsers will have to add their own compatible here as well. Signed-off-by:
-
Miquel Raynal authored
The memory mapped MTD devices also share a lot with all the other MTD devices, so let's share the properties by referencing mtd.yaml. We can then drop mentioning the properties, to the cost of mentioning the possible "sram" node name prefix. Signed-off-by:
-
Miquel Raynal authored
When redefining common properties does not bring any additional information, just drop them from the SPI-NOR bindings because these properties already are definied in mtd.yaml. Signed-off-by:
-
Miquel Raynal authored
Copy-paste an existing DT node to ensure the dt_binding_check target would catch any unforeseen difference. Signed-off-by:
-
Miquel Raynal authored
The chip node name in this driver is expected to be different and should be prefixed with onenand instead of the regular "flash" string, so mention it. Signed-off-by:
-
Miquel Raynal authored
Defining partitions as subnodes of the controller has been deprecated long time ago, but unlike having partitions within the controller node, having an enveloppe named "partitions" (which is not itself within a chip subnode) is not that common, so keep this deprecated definition in this file. Signed-off-by:
-
Miquel Raynal authored
In almost all the schema mentioning a NAND chip child node, the name of the subnode contains a single index number. In practice there are currently no controller supporting more than 8 cs so even the [a-f] numbers are not needed. But let's be safe and limit the number of touched files by just allow a single number everywhere, so in practice up to 16 CS at most. This value can anyway be limited in each schema. Signed-off-by:
-
Miquel Raynal authored
generic files, so let's drop these properties from the individual NAND controller bindings when no additional information is provided rather than the possible presence of the property. Signed-off-by:
-
Miquel Raynal authored
A NAND chip is an MTD device. mtd.yaml already defines many useful and relevant properties, let's reference this file here to get access to these additional property definitions. Signed-off-by:
-
Miquel Raynal authored
There is already a real partitions.yaml file, so assuming everybody knows hot to read yaml schema now, this text file is no longer needed, so drop it. Depending on the situation, the lines referring to this file are either dropped or edited to point to mtd.yaml which includes partition{,s}.yaml. Signed-off-by: -
Miquel Raynal authored
Over time the various ways to define MTD partitions has evolved. Most of the controllers support several different bindings. Let's define all possible choices in one file and mark the legacy ones deprecated. This way, we can just reference this file and avoid dupplicating these definitions. Signed-off-by:
-
Hui Tang authored
It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL. Fixes: 96ba9dd6 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories") Signed-off-by:
Hui Tang <tanghui20@huawei.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Rafał Miłecki authored
TP-Link SafeLoader partitioning means flash contains multiple partitions defined in the on-flash table. Some of those partitions may have a special meaning and may require describing additionally. Allow that. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
-
- 07 Nov, 2022 14 commits
-
-
Jilin Yuan authored
Delete the redundant word 'it'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
-
Gaosheng Cui authored
I got the error report while inject fault in init_mtd(): sysfs: cannot create duplicate filename '/devices/virtual/bdi/mtd-0' Call Trace: <TASK> dump_stack_lvl+0x67/0x83 sysfs_warn_dup+0x60/0x70 sysfs_create_dir_ns+0x109/0x120 kobject_add_internal+0xce/0x2f0 kobject_add+0x98/0x110 device_add+0x179/0xc00 device_create_groups_vargs+0xf4/0x100 device_create+0x7b/0xb0 bdi_register_va.part.13+0x58/0x2d0 bdi_register+0x9b/0xb0 init_mtd+0x62/0x171 [mtd] do_one_initcall+0x6c/0x3c0 do_init_module+0x58/0x222 load_module+0x268e/0x27d0 __do_sys_finit_module+0xd5/0x140 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> kobject_add_internal failed for mtd-0 with -EEXIST, don't try to register things with the same name in the same directory. Error registering mtd class or bdi: -17 If init_mtdchar() fails in init_mtd(), mtd_bdi will not be unregistered, as a result, we can't load the mtd module again, to fix this by calling bdi_unregister(mtd_bdi) after out_procfs label. Fixes: 445caaa2 ("mtd: Allocate bdi objects dynamically") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Rafał Miłecki authored
This adds support for "linux,rootfs" binding that is used to mark flash partition containing rootfs. It's useful for devices using device tree that don't have bootloader passing root info in cmdline. Signed-off-by:
-
Rafał Miłecki authored
Linux needs to know what to use as root device. On embedded devices with flash the only common way to specify that is cmdline & root= parameter. That solution works with U-Boot which is Linux & cmdline aware but isn't available with all market bootloaders. Also that method is fragile: 1. Requires specific probing order on multi-flash devices 2. Uses hardcoded partitions indexes A lot of devices use different partitioning methods. It may be "fixed-partitions" or some dynamic partitioning (e.g. based on parts table). For such cases allow "linux,rootfs" property to mark correct flash partition. Signed-off-by:
-
Zhang Xiaoxu authored
There is a kmemleak when register device failed: unreferenced object 0xffff888101aab550 (size 8): comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s) hex dump (first 8 bytes): 6d 74 64 30 00 88 ff ff mtd0.... backtrace: [<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150 [<000000003c32b416>] kvasprintf+0xb0/0x130 [<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0 [<000000006e781163>] dev_set_name+0xab/0xe0 [<00000000e30d0c78>] add_mtd_device+0x4bb/0x700 [<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0 [<00000000c0d88488>] 0xffffffffa0238457 [<00000000b40d0922>] 0xffffffffa02a008f [<0000000023d17b9d>] do_one_initcall+0x87/0x2a0 [<00000000770f6ca6>] do_init_module+0xdf/0x320 [<000000007b6768fe>] load_module+0x2f98/0x3330 [<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0 [<00000000674c2290>] do_syscall_64+0x35/0x80 [<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 If register device failed, should call put_device() to give up the reference. Fixes: 1f24b5a8 ("[MTD] driver model updates") Signed-off-by:Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Arnd Bergmann authored
The sa1100 lart platform was removed, so its flash driver is no longer useful. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dan Carpenter authored
On 64 bit systems, the highest 32 bits of the "offset" variable are not initialized. Also the existing code is not endian safe (it will fail on big endian systems). Change the type of "offset" to a u32. Fixes: aec4d5f5ffd0 ("mtd: parsers: add TP-Link SafeLoader partitions table parser") Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Rafał Miłecki authored
This parser deals with most TP-Link home routers. It reads info about partitions and registers them in the MTD subsystem. Example from TP-Link Archer C5 V2: spi-nor spi0.0: s25fl128s1 (16384 Kbytes) 15 tplink-safeloader partitions found on MTD device spi0.0 Creating 15 MTD partitions on "spi0.0": 0x000000000000-0x000000040000 : "fs-uboot" 0x000000040000-0x000000440000 : "os-image" 0x000000440000-0x000000e40000 : "rootfs" 0x000000e40000-0x000000e40200 : "default-mac" 0x000000e40200-0x000000e40400 : "pin" 0x000000e40400-0x000000e40600 : "product-info" 0x000000e50000-0x000000e60000 : "partition-table" 0x000000e60000-0x000000e60200 : "soft-version" 0x000000e61000-0x000000e70000 : "support-list" 0x000000e70000-0x000000e80000 : "profile" 0x000000e80000-0x000000e90000 : "default-config" 0x000000e90000-0x000000ee0000 : "user-config" 0x000000ee0000-0x000000fe0000 : "log" 0x000000fe0000-0x000000ff0000 : "radio_bk" 0x000000ff0000-0x000001000000 : "radio" Signed-off-by:
-
Rafał Miłecki authored
Most TP-Link home routers use the same partitioning system based on a custom ASCII table. It doesn't seem to have any official name. GPL sources contain tool named simply "make_flash" and Makefile target "FlashMaker". This partitions table format was first found in devices with a custom SafeLoader bootloader so it was called SafeLoader by a community. Later it was ported to other bootloaders but it seems the name sticked. Add binding for describing flashes with SafeLoader partitions table. It allows operating systems to parse it properly and register proper flash layout. Signed-off-by:
-
Ray Zhang authored
The panic function disables the local interrupts, preemption, and all other processors. When the invoked mtdoops needs to erase a used page, calling schedule_work() to do it will not work. Instead, just call mtdoops_erase function immediately. Tested: ~# echo c > /proc/sysrq-trigger [ 171.654759] sysrq: Trigger a crash [ 171.658325] Kernel panic - not syncing: sysrq triggered crash ...... [ 172.406423] mtdoops: not ready 34, 35 (erase immediately) [ 172.432285] mtdoops: ready 34, 35 [ 172.435633] Rebooting in 10 seconds.. Signed-off-by:
Ray Zhang <sgzhang@google.com> Signed-off-by:
-
Ray Zhang authored
Preparing for next patch with minimal code difference, add mtdoops_erase function and move mtdoops_inc_counter to after it, with no functional change. Signed-off-by:
-
Ray Zhang authored
To comply with latest kernel code requirement, change printk() to counterpart pr_ functions in mtdoops driver: - change printk(INFO) to pr_info() - change printk(DEBUG) to pr_debug() - change printk(WARNING) to pr_warn() - change printk(ERR) to pr_err() Note that only if dynamic debugging is enabled or DEBUG is defined, printk(KERN_DEBUG) and pr_debug() are equivalent; Otherwise pr_debug() is no-op, causing different behavior. Signed-off-by:
-
Rafał Miłecki authored
So far this feature was limited to the top-level "nvmem-cells" node. There are multiple parsers creating partitions and subpartitions dynamically. Extend that code to handle them too. This allows finding partition-* node for every MTD (sub)partition. Random example: partitions { compatible = "brcm,bcm947xx-cfe-partitions"; partition-firmware { compatible = "brcm,trx"; partition-loader { }; }; }; Cc: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: -
Rafał Miłecki authored
1. Don't hardcode "partition-" string twice 2. Use simpler logic & use ->name to avoid of_property_read_string() 3. Use mtd_get_of_node() helper Cc: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
- 30 Oct, 2022 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "A use-after-free bugfix in the smscufx driver and various minor error path fixes, smaller build fixes, sysfs fixes and typos in comments in the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb drivers" * tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: cyber2000fb: fix missing pci_disable_device() fbdev: sisfb: use explicitly signed char fbdev: smscufx: Fix several use-after-free bugs fbdev: xilinxfb: Make xilinxfb_release() return void fbdev: sisfb: fix repeated word in comment fbdev: gbefb: Convert sysfs snprintf to sysfs_emit fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards fbdev: da8xx-fb: Fix error handling in .remove() fbdev: MIPS supports iomem addresses
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Some small driver fixes for 6.1-rc3. They include: - iio driver bugfixes - counter driver bugfixes - coresight bugfixes, including a revert and then a second fix to get it right. All of these have been in linux-next with no reported problems" * tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) misc: sgi-gru: use explicitly signed char coresight: cti: Fix hang in cti_disable_hw() Revert "coresight: cti: Fix hang in cti_disable_hw()" counter: 104-quad-8: Fix race getting function mode and direction counter: microchip-tcb-capture: Handle Signal1 read and Synapse coresight: cti: Fix hang in cti_disable_hw() coresight: Fix possible deadlock with lock dependency counter: ti-ecap-capture: fix IS_ERR() vs NULL check counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array iio: bmc150-accel-core: Fix unsafe buffer attributes iio: adxl367: Fix unsafe buffer attributes iio: adxl372: Fix unsafe buffer attributes iio: at91-sama5d2_adc: Fix unsafe buffer attributes iio: temperature: ltc2983: allocate iio channels once tools: iio: iio_utils: fix digit calculation iio: adc: stm32-adc: fix channel sampling time init iio: adc: mcp3911: mask out device ID in debug prints iio: adc: mcp3911: use correct id bits iio: adc: mcp3911: return proper error code on failure to allocate trigger iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "A few small USB fixes for 6.1-rc3. Include in here are: - MAINTAINERS update, including a big one for the USB gadget subsystem. Many thanks to Felipe for all of the years of hard work he has done on this codebase, it was greatly appreciated. - dwc3 driver fixes for reported problems. - xhci driver fixes for reported problems. - typec driver fixes for minor issues - uvc gadget driver change, and then revert as it wasn't relevant for 6.1-final, as it is a new feature and people are still reviewing and modifying it. All of these have been in the linux-next tree with no reported issues" * tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: gadget: Don't set IMI for no_interrupt usb: dwc3: gadget: Stop processing more requests on IMI Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets" xhci: Remove device endpoints from bandwidth list when freeing the device xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices xhci: Add quirk to reset host back to default state at shutdown usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller usb: dwc3: st: Rely on child's compatible instead of name usb: gadget: uvc: limit isoc_sg to super speed gadgets usb: bdc: change state when port disconnected usb: typec: ucsi: acpi: Implement resume callback usb: typec: ucsi: Check the connection on resume usb: gadget: aspeed: Fix probe regression usb: gadget: uvc: fix sg handling during video encode usb: gadget: uvc: fix sg handling in error case usb: gadget: uvc: fix dropped frame after missed isoc usb: dwc3: gadget: Don't delay End Transfer on delayed_status usb: dwc3: Don't switch OTG -> peripheral if extcon is present MAINTAINERS: Update maintainers for broadcom USB MAINTAINERS: move USB gadget and phy entries under the main USB entry -
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - convert gpio-tegra to using an immutable irqchip - MAINTAINERS update * tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: Change myself to a maintainer gpio: tegra: Convert to immutable irq chip
-
