Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains a large batch with Netfilter fixes for
your net tree, they are:

1) Two patches to solve conntrack garbage collector cpu hogging, one to
   remove GC_MAX_EVICTS and another to look at the ratio (scanned entries
   vs. evicted entries) to make a decision on whether to reduce or not
   the scanning interval. From Florian Westphal.

2) Two patches to fix incorrect set element counting if NLM_F_EXCL is
   is not set. Moreover, don't decrenent set->nelems from abort patch
   if -ENFILE which leaks a spare slot in the set. This includes a
   patch to deconstify the set walk callback to update set->ndeact.

3) Two fixes for the fwmark_reflect sysctl feature: Propagate mark to
   reply packets both from nf_reject and local stack, from Pau Espin Pedrol.

4) Fix incorrect handling of loopback traffic in rpfilter and nf_tables
   fib expression, from Liping Zhang.

5) Fix oops on stateful objects netlink dump, when no filter is specified.
   Also from Liping Zhang.

6) Fix a build error if proc is not available in ipt_CLUSTERIP, related
   to fix that was applied in the previous batch for net. From Arnd Bergmann.

7) Fix lack of string validation in table, chain, set and stateful
   object names in nf_tables, from Liping Zhang. Moreover, restrict
   maximum log prefix length to 127 bytes, otherwise explicitly bail
   out.

8) Two patches to fix spelling and typos in nf_tables uapi header file
   and Kconfig, patches from Alexander Alemayhu and William Breathitt Gray.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - fix reference count handling on fragmentation error, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 17bedab2 ("bpf: xdp: Allow head adjustment in XDP prog")
added a new XDP helper to prepend and remove data from a frame.
Make virtio_net reject programs making use of this helper until
proper support is added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the small buffer case during driver unload we currently use
put_page instead of dev_kfree_skb. Resolve this by adding a check
for virtnet mode when checking XDP queue type. Also name the
function so that the code reads correctly to match the additional
check.

Fixes: bb91accf ("virtio-net: XDP support for small buffers")
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: fix scheduling napi

v3:
simply the argument for patch #3. Replace &tp->napi with napi.

v2:
Add smp_mb__after_atomic() for patch #1.

v1:
Scheduling the napi during the following periods would let it be ignored.
And the events wouldn't be handled until next napi_schedule() is called.

1. after napi_disable and before napi_enable().
2. after all actions of napi function is completed and before calling
   napi_complete().

If no next napi_schedule() is called, tx or rx would stop working.

In order to avoid these situations, the followings solutions are applied.

1. prevent start_xmit() from calling napi_schedule() during runtime suspend
   or after napi_disable().
2. re-schedule the napi for tx if it is necessary.
3. check if any rx is finished or not after napi_enable().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Schedule the napi after napi_enable() for rx, if it is necessary.

If the rx is completed when napi is disabled, the sheduling of napi
would be lost. Then, no one handles the rx packet until next napi
is scheduled.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Re-schedule napi after napi_complete() for tx, if it is necessay.

In r8152_poll(), if the tx is completed after tx_bottom() and before
napi_complete(), the scheduling of napi would be lost. Then, no
one handles the next tx until the next napi_schedule() is called.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stop the tx when the napi is disabled to prevent napi_schedule() is
called.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit()
from calling napi_schedule() directly during runtime suspend.

After calling napi_disable() or clearing the flag of WORK_ENABLE,
scheduling the napi is useless.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 448b4482 ("net: dsa: Add lockdep class to tx queues to avoid
lockdep splat") removed the netif_device_detach() call done in
dsa_slave_suspend() which is necessary, and paired with a corresponding
netif_device_attach(), bring it back.

Fixes: 448b4482 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geert Uytterhoeven says:

====================
net: phy: leds: Fix truncated LED trigger names and crashes

I started seeing crashes during s2ram and poweroff on all my ARM boards,
like:

    Unable to handle kernel NULL pointer dereference at virtual address 00000000
    ...
    [<c04116d4>] (__list_del_entry_valid) from [<c05e8948>] (led_trigger_unregister+0x34/0xcc)
    [<c05e8948>] (led_trigger_unregister) from [<c05336c4>] (phy_led_triggers_unregister+0x28/0x34)
    [<c05336c4>] (phy_led_triggers_unregister) from [<c0531d44>] (phy_detach+0x30/0x74)
    [<c0531d44>] (phy_detach) from [<c0538bdc>] (sh_eth_close+0x64/0x9c)
    [<c0538bdc>] (sh_eth_close) from [<c04d4ce0>] (dpm_run_callback+0x48/0xc8)

or:

    list_del corruption. prev->next should be dede6540, but was 2e323931
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:52!
    ...
    [<c02f6d70>] (__list_del_entry_valid) from [<c0425168>] (led_trigger_unregister+0x34/0xcc)
    [<c0425168>] (led_trigger_unregister) from [<c03a05a0>] (phy_led_triggers_unregister+0x28/0x34)
    [<c03a05a0>] (phy_led_triggers_unregister) from [<c039ec04>] (phy_detach+0x30/0x74)
    [<c039ec04>] (phy_detach) from [<c03a4fc0>] (sh_eth_close+0x6c/0xa4)
    [<c03a4fc0>] (sh_eth_close) from [<c0483234>] (__dev_close_many+0xac/0xd0)

As the only clue was a kernel message like

    sh-eth ee700000.ethernet eth0: No phy led trigger registered for speed(100)

I had to bisected this, leading to commit 4567d686 ("phy:
increase size of MII_BUS_ID_SIZE and bus_id").  Reverting that commit
fixed the issue.

More investigation revealed the crashes are due to the combination of
two things:
  - Truncated LED trigger names, leading to duplicate names, and
    registration failures,
  - Bad error handling in case of registration failures.

Both are fixed by this patch series.

Changes compared to v1:
  - Add Reviewed-by,
  - New patch "net: phy: leds: Break dependency of phy.h on
    phy_led_triggers.h",
  - Drop moving the include of <linux/phy_led_triggers.h>, as
    <linux/phy.h> no longer includes it,
  - #include <linux/phy.h> from <linux/phy_led_triggers.h>.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4567d686 ("phy: increase size of MII_BUS_ID_SIZE and
bus_id") increased the size of MII bus IDs, but forgot to update the
private definition in <linux/phy_led_triggers.h>.
This may cause:
  1. Truncation of LED trigger names,
  2. Duplicate LED trigger names,
  3. Failures registering LED triggers,
  4. Crashes due to bad error handling in the LED trigger failure path.

To fix this, and prevent the definitions going out of sync again in the
future, let the PHY LED trigger code use the existing MII_BUS_ID_SIZE
definition.

Example:
  - Before I had triggers "ee700000.etherne:01:100Mbps" and
    "ee700000.etherne:01:10Mbps",
  - After the increase of MII_BUS_ID_SIZE, both became
    "ee700000.ethernet-ffffffff:01:" => FAIL,
  - Now, the triggers are "ee700000.ethernet-ffffffff:01:100Mbps" and
    "ee700000.ethernet-ffffffff:01:10Mbps", which are unique again.

Fixes: 4567d686 ("phy: increase size of MII_BUS_ID_SIZE and bus_id")
Fixes: 2e0bc452 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

<linux/phy.h> includes <linux/phy_led_triggers.h>, which is not really
needed.  Drop the include from <linux/phy.h>, and add it to all users
that didn't include it explicitly.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy_attach_direct() ignores errors returned by
phy_led_triggers_register(). I think that's OK, as LED triggers can be
considered a non-critical feature.

However, this causes problems later:
  - phy_led_trigger_change_speed() will access the array
    phy_device.phy_led_triggers, which has been freed in the error path
    of phy_led_triggers_register(), which may lead to a crash.

  - phy_led_triggers_unregister() will access the same array, leading to
    crashes during s2ram or poweroff, like:

	Unable to handle kernel NULL pointer dereference at virtual address
	00000000
	...
	[<c04116d4>] (__list_del_entry_valid) from [<c05e8948>] (led_trigger_unregister+0x34/0xcc)
	[<c05e8948>] (led_trigger_unregister) from [<c05336c4>] (phy_led_triggers_unregister+0x28/0x34)
	[<c05336c4>] (phy_led_triggers_unregister) from [<c0531d44>] (phy_detach+0x30/0x74)
	[<c0531d44>] (phy_detach) from [<c0538bdc>] (sh_eth_close+0x64/0x9c)
	[<c0538bdc>] (sh_eth_close) from [<c04d4ce0>] (dpm_run_callback+0x48/0xc8)

    or:

	list_del corruption. prev->next should be dede6540, but was 2e323931
	------------[ cut here ]------------
	kernel BUG at lib/list_debug.c:52!
	...
	[<c02f6d70>] (__list_del_entry_valid) from [<c0425168>] (led_trigger_unregister+0x34/0xcc)
	[<c0425168>] (led_trigger_unregister) from [<c03a05a0>] (phy_led_triggers_unregister+0x28/0x34)
	[<c03a05a0>] (phy_led_triggers_unregister) from [<c039ec04>] (phy_detach+0x30/0x74)
	[<c039ec04>] (phy_detach) from [<c03a4fc0>] (sh_eth_close+0x6c/0xa4)
	[<c03a4fc0>] (sh_eth_close) from [<c0483234>] (__dev_close_many+0xac/0xd0)

To fix this, clear phy_device.phy_num_led_triggers in the error path of
phy_led_triggers_register() fails.

Note that the "No phy led trigger registered for speed" message will
still be printed on link speed changes, which is a good cue that
something went wrong with the LED triggers.

Fixes: 2e0bc452 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the binding was defined, I was not aware that mt2701 was an earlier
version of the SoC. For sake of consistency, the ethernet driver should
use mt2701 inside the compat string as this is the earliest SoC with the
ethernet core.

The ethernet driver is currently of no real use until we finish and
upstream the DSA driver. There are no users of this binding yet. It should
be safe to fix this now before it is too late and we need to provide
backward compatibility for the mt7623-eth compat string.
Reported-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the binding was defined, I was not aware that mt2701 was an earlier
version of the SoC. For sake of consistency, the ethernet driver should
use mt2701 inside the compat string as this is the earliest SoC with the
ethernet core.

The ethernet driver is currently of no real use until we finish and
upstream the DSA driver. There are no users of this binding yet. It should
be safe to fix this now before it is too late and we need to provide
backward compatibility for the mt7623-eth compat string.
Reported-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Fix RTNL lock usage in bnxt_sp_task().

There are 2 function calls from bnxt_sp_task() that have buggy RTNL
usage.  These 2 functions take RTNL lock under some conditions, but
some callers (such as open, ethtool) have already taken RTNL.  These
3 patches fix the issue by making it clear that callers must take
RTNL.  If the caller is bnxt_sp_task() which does not automatically
take RTNL, we add a common scheme for bnxt_sp_task() to call these
functions properly under RTNL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_get_port_module_status() calls bnxt_update_link() which expects
RTNL to be held.  In bnxt_sp_task() that does not hold RTNL, we need to
call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to
be moved to the end of bnxt_sp_task().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_update_link() is called from multiple code paths.  Most callers,
such as open, ethtool, already hold RTNL.  Only the caller bnxt_sp_task()
does not.  So it is a bug to take RTNL inside bnxt_update_link().

Fix it by removing the RTNL inside bnxt_update_link().  The function
now expects the caller to always hold RTNL.

In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling
bnxt_update_link().  We also need to move the call to the end of
bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In bnxt_sp_task(), we set a bit BNXT_STATE_IN_SP_TASK so that bnxt_close()
will synchronize and wait for bnxt_sp_task() to finish.  Some functions
in bnxt_sp_task() require us to clear BNXT_STATE_IN_SP_TASK and then
acquire rtnl_lock() to prevent race conditions.

There are some bugs related to this logic. This patch refactors the code
to have common bnxt_rtnl_lock_sp() and bnxt_rtnl_unlock_sp() to handle
the RTNL and the clearing/setting of the bit.  Multiple functions will
need the same logic.  We also need to move bnxt_reset() to the end of
bnxt_sp_task().  Functions that clear BNXT_STATE_IN_SP_TASK must be the
last functions to be called in bnxt_sp_task().  The common scheme will
handle the condition properly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit().
Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient.

Fixes: 3c715127 ("tcp: add memory barriers to write space paths")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now sctp gso puts segments into skb's frag_list, then processes these
segments in skb_segment. But skb_segment handles them only when gs is
enabled, as it's in the same branch with skb's frags.

Although almost all the NICs support sg other than some old ones, but
since commit 1e16aa3d ("net: gso: use feature flag argument in all
protocol gso handlers"), features &= skb->dev->hw_enc_features, and
xfrm_output_gso call skb_segment with features = 0, which means sctp
gso would call skb_segment with sg = 0, and skb_segment would not work
as expected.

This patch is to fix it by setting features param with NETIF_F_SG when
calling skb_segment so that it can go the right branch to process the
skb's frag_list.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_addr_id2transport is a function for sockopt to look up assoc by
address. As the address is from userspace, it can be a v4-mapped v6
address. But in sctp protocol stack, it always handles a v4-mapped
v6 address as a v4 address. So it's necessary to convert it to a v4
address before looking up assoc by address.

This patch is to fix it by calling sctp_verify_addr in which it can do
this conversion before calling sctp_endpoint_lookup_assoc, just like
what sctp_sendmsg and __sctp_connect do for the address from users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Robert Shearman says:

====================
net: Fix oops on state free after lwt module unload

An oops is seen in lwtstate_free after an lwt ops module has been
unloaded. This patchset fixes this by preventing modules implementing
lwtunnel ops from being unloaded whilst there's state alive using
those ops. The first patch adds fills in a new owner field in all lwt
ops and the second patch makes use of this to reference count the
modules as state is built and destroyed using them.

Changes in v3:
 - don't put module reference if try_module_get fails on building state

Changes in v2:
 - specify module owner for all modules as suggested by DaveM
 - reference count all modules building lwt state, not just those ops
   implementing destroy_state, as also suggested by DaveM.
 - rebased on top of David Ahern's lwtunnel changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When attempting to free lwtunnel state after the module for the encap
has been unloaded an oops occurs:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: lwtstate_free+0x18/0x40
[..]
task: ffff88003e372380 task.stack: ffffc900001fc000
RIP: 0010:lwtstate_free+0x18/0x40
RSP: 0018:ffff88003fd83e88 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88002bbb3380 RCX: ffff88000c91a300
[..]
Call Trace:
 <IRQ>
 free_fib_info_rcu+0x195/0x1a0
 ? rt_fibinfo_free+0x50/0x50
 rcu_process_callbacks+0x2d3/0x850
 ? rcu_process_callbacks+0x296/0x850
 __do_softirq+0xe4/0x4cb
 irq_exit+0xb0/0xc0
 smp_apic_timer_interrupt+0x3d/0x50
 apic_timer_interrupt+0x93/0xa0
[..]
Code: e8 6e c6 fc ff 89 d8 5b 5d c3 bb de ff ff ff eb f4 66 90 66 66 66 66 90 55 48 89 e5 53 0f b7 07 48 89 fb 48 8b 04 c5 00 81 d5 81 <48> 8b 40 08 48 85 c0 74 13 ff d0 48 8d 7b 20 be 20 00 00 00 e8

The problem is after the module for the encap can be unloaded the
corresponding ops is removed and is thus NULL here.

Modules implementing lwtunnel ops should not be allowed to unload
while there is state alive using those ops, so grab the module
reference for the ops on creating lwtunnel state and of course release
the reference when freeing the state.

Fixes: 1104d9ba ("lwtunnel: Add destroy state operation")
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modules implementing lwtunnel ops should not be allowed to unload
while there is state alive using those ops, so specify the owning
module for all lwtunnel ops.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Parthasarathy Bhuvaragan says:

====================
tipc: topology server fixes for nametable soft lockup

In this series, we revert the commit 333f7962 ("tipc: fix a
race condition leading to subscriber refcnt bug") and provide an
alternate solution to fix the race conditions in commits 2-4.

We have to do this as the above commit introduced a nametbl soft
lockup at module exit as described by patch#4.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In tipc_server_stop(), we iterate over the connections with limiting
factor as server's idr_in_use. We ignore the fact that this variable
is decremented in tipc_close_conn(), leading to premature exit.

In this commit, we iterate until the we have no connections left.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In tipc_conn_sendmsg(), we first queue the request to the outqueue
followed by the connection state check. If the connection is not
connected, we should not queue this message.

In this commit, we reject the messages if the connection state is
not CF_CONNECTED.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 333f7962 ("tipc: fix a race condition leading to
subscriber refcnt bug") reveals a soft lockup while acquiring
nametbl_lock.

Before commit 333f7962, we call tipc_conn_shutdown() from
tipc_close_conn() in the context of tipc_topsrv_stop(). In that
context, we are allowed to grab the nametbl_lock.

Commit 333f7962, moved tipc_conn_release (renamed from
tipc_conn_shutdown) to the connection refcount cleanup. This allows
either tipc_nametbl_withdraw() or tipc_topsrv_stop() to the cleanup.

Since tipc_exit_net() first calls tipc_topsrv_stop() and then
tipc_nametble_withdraw() increases the chances for the later to
perform the connection cleanup.

The soft lockup occurs in the call chain of tipc_nametbl_withdraw(),
when it performs the tipc_conn_kref_release() as it tries to grab
nametbl_lock again while holding it already.
tipc_nametbl_withdraw() grabs nametbl_lock
  tipc_nametbl_remove_publ()
    tipc_subscrp_report_overlap()
      tipc_subscrp_send_event()
        tipc_conn_sendmsg()
          << if (con->flags != CF_CONNECTED) we do conn_put(),
             triggering the cleanup as refcount=0. >>
          tipc_conn_kref_release
            tipc_sock_release
              tipc_conn_release
                tipc_subscrb_delete
                  tipc_subscrp_delete
                    tipc_nametbl_unsubscribe << Soft Lockup >>

The previous changes in this series fixes the race conditions fixed
by commit 333f7962. Hence we can now revert the commit.

Fixes: 333f7962 ("tipc: fix a race condition leading to subscriber refcnt bug")
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Until now, the generic server framework maintains the connection
id's per subscriber in server's conn_idr. At tipc_close_conn, we
remove the connection id from the server list, but the connection is
valid until we call the refcount cleanup. Hence we have a window
where the server allocates the same connection to an new subscriber
leading to inconsistent reference count. We have another refcount
warning we grab the refcount in tipc_conn_lookup() for connections
with flag with CF_CONNECTED not set. This usually occurs at shutdown
when the we stop the topology server and withdraw TIPC_CFG_SRV
publication thereby triggering a withdraw message to subscribers.

In this commit, we:
1. remove the connection from the server list at recount cleanup.
2. grab the refcount for a connection only if CF_CONNECTED is set.
Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Until now, the subscribers keep track of the subscriptions using
reference count at subscriber level. At subscription cancel or
subscriber delete, we delete the subscription only if the timer
was pending for the subscription. This approach is incorrect as:
1. del_timer() is not SMP safe, if on CPU0 the check for pending
   timer returns true but CPU1 might schedule the timer callback
   thereby deleting the subscription. Thus when CPU0 is scheduled,
   it deletes an invalid subscription.
2. We export tipc_subscrp_report_overlap(), which accesses the
   subscription pointer multiple times. Meanwhile the subscription
   timer can expire thereby freeing the subscription and we might
   continue to access the subscription pointer leading to memory
   violations.

In this commit, we introduce subscription refcount to avoid deleting
an invalid subscription.
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We trigger a soft lockup as we grab nametbl_lock twice if the node
has a pending node up/down or link up/down event while:
- we process an incoming named message in tipc_named_rcv() and
  perform an tipc_update_nametbl().
- we have pending backlog items in the name distributor queue
  during a nametable update using tipc_nametbl_publish() or
  tipc_nametbl_withdraw().

The following are the call chain associated:
tipc_named_rcv() Grabs nametbl_lock
   tipc_update_nametbl() (publish/withdraw)
     tipc_node_subscribe()/unsubscribe()
       tipc_node_write_unlock()
          << lockup occurs if an outstanding node/link event
             exits, as we grabs nametbl_lock again >>

tipc_nametbl_withdraw() Grab nametbl_lock
  tipc_named_process_backlog()
    tipc_update_nametbl()
      << rest as above >>

The function tipc_node_write_unlock(), in addition to releasing the
lock processes the outstanding node/link up/down events. To do this,
we need to grab the nametbl_lock again leading to the lockup.

In this commit we fix the soft lockup by introducing a fast variant of
node_unlock(), where we just release the lock. We adapt the
node_subscribe()/node_unsubscribe() to use the fast variants.
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing set->ndeact update on each deactivated element from the set
flush path. Otherwise, sets with fixed size break after flush since
accounting breaks.

 # nft add set x y { type ipv4_addr\; size 2\; }
 # nft add element x y { 1.1.1.1 }
 # nft add element x y { 1.1.1.2 }
 # nft flush set x y
 # nft add element x y { 1.1.1.1 }
 <cmdline>:1:1-28: Error: Could not process rule: Too many open files in system

Fixes: 8411b644 ("netfilter: nf_tables: support for set flushing")
Reported-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The flush operation needs to modify set and element objects, so let's
deconstify this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If the element exists and no NLM_F_EXCL is specified, do not bump
set->nelems, otherwise we leak one set element slot. This problem
amplifies if the set is full since the abort path always decrements the
counter for the -ENFILE case too, giving one spare extra slot.

Fix this by moving set->nelems update to nft_add_set_elem() after
successful element insertion. Moreover, remove the element if the set is
full so there is no need to rely on the abort path to undo things
anymore.

Fixes: c016c7e4 ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127,
at nf_log_packet(), so the extra part is useless.

Second, after adding a log rule with a very very long prefix, we will
fail to dump the nft rules after this _special_ one, but acctually,
they do exist. For example:
  # name_65000=$(printf "%0.sQ" {1..65000})
  # nft add rule filter output log prefix "$name_65000"
  # nft add rule filter output counter
  # nft add rule filter output counter
  # nft list chain filter output
  table ip filter {
      chain output {
          type filter hook output priority 0; policy accept;
      }
  }

So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1.

Fixes: 96518518 ("netfilter: add nftables")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Tobias Regnery says:

====================
alx: fix fallout from multi queue conversion

Here are 3 fixes for the multi queue conversion in v4.10.

The first patch fixes a wrong condition in an if statement.

Patches 2 and 3 fixes regressions in the corner case when requesting msi-x
interrupts fails and we fall back to msi or legacy interrupts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If requesting msi-x interrupts fails in alx_request_irq we fall back to
a single tx queue and msi or legacy interrupts.

Currently the adapter stops working in this case and we get tx watchdog
timeouts. For reasons unknown the adapter gets confused when we load the
dma adresses to the chip in alx_init_ring_ptrs twice: the first time with
multiple queues and the second time in the fallback case with a single
queue.

To fix this move the the call to alx_reinit_rings (which calls
alx_init_ring_ptrs) after alx_request_irq. At this time it is clear how
much tx queues we have and which dma addresses we use.

Fixes: d768319c ("alx: enable multiple tx queues")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If requesting msi-x interrupts fails we should fall back to msi or
legacy interrupts. However alx_realloc_ressources don't call
alx_init_intr, so we fail to set the right number of tx queues.
This results in watchdog timeouts and a nonfunctional adapter.

Fixes: d768319c ("alx: enable multiple tx queues")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>