Add a node for the QMP AOSS.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-4-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the IPCC node, used to send and receive IPC signals with
remoteprocs.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-3-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

PM8150 ldo11 on the MTP is wired to VDD_SSC_CX and controlled in levels,
rather than as a regulator. As such it's available from the rpmhpd as
the SM8250_LCX power domain.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Fixes: ec13d5c2 ("arm64: dts: qcom: sm8250-mtp: Add pm8150, pm8150l and pm8009")
Link: https://lore.kernel.org/r/20200622222747.717306-2-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add device tree support for the Sony Xperia 10 and 10
Plus smartphones. They are all based on the Sony Ganges
platform (sdm630/636) and share a lot of common code.
The differences are really minor, so a Ganges-common DTSI
has been created to reduce clutter.

10 - Kirin
10 Plus - Mermaid

This platform is based on SoMC Nile, but there are some
major differences when it comes to pin configuration and
panel setup (among others).

The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Martin Botka <martin.botka1@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Martin Botka <martin.botka1@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-7-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.

XA2 - Pioneer
XA2 Plus - Voyager
XA2 Ultra - Discovery

The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Łukasz Patron <priv.luk@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-6-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add devicetree files for SDM630 SoC and its pin configuration.
This commit adds basic nodes like cpu, psci and other required
configuration for booting up from eMMC to the serial console.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-5-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add base DTS files for pm660(l) along with GPIOs, power-on and
rtc nodes.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-4-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Much like SDM845 each serial engine has 4 pins attached. Add all
possible I2C and SPI nodes for all 20 serial engines.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200606131300.3874987-1-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the TLMM pinctrl node for SM8250 and reserve pins 28-31 and 40-43 on
the MTP as firmware does not allow Linux to touch these pins.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200430181716.3797842-1-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add temperature alarm and thermal zone configuration to all three
pm8150 instances. Configuration is largely based on the msm-4.19 tree.
These alarms use main adc of the pmic. Separate temperature adc is not
supported yet.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200621192824.2069145-3-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Include files describing used PMIC chips, GPIOs, power on, etc nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200621192824.2069145-2-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add base DTS file for pm8009 along with GPIOs and power-on nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200621192824.2069145-1-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable mmc device found on ipq8074 devices
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1591702511-18571-1-git-send-email-sivaprak@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add device nodes for the USB3 controller, QMP SS PHY and
SNPS HS PHY.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vinod.koul@linaro.org>
Link: https://lore.kernel.org/r/1586566362-21450-3-git-send-email-wcheng@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

sm8150 has 27 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/1cdbebe6f7f69ccd8468a4138b56e8a200289d95.1591684754.git.amit.kucheria@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Added tsens bindings for sm8150 and sm8250
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/c3361043e66139812bd4cd85b917659d85e1564f.1591684754.git.amit.kucheria@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add nodes for the network-on-chip interconnect buses present on
MSM8916-based platforms.
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200617134515.25229-1-georgi.djakov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Link: https://lore.kernel.org/r/1592668635-10894-1-git-send-email-pillair@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add on-SoC watchdog device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200604004331.669936-7-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

apq8016-sbc.dtsi uses spaces on some lines instead of tabs.
Make this consistent by converting them to tabs.

Also remove some redundant comments from the DAI link definitions
- this is already visible from the comment block before the "sound"
node or the device node entries itself.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-4-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The original qcom kernel changed the PDM GPIOs to be pull-down
during sleep at some point. Reportedly this was done because
there was some "leakage at PDM outputs during sleep":

  https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0

I cannot say how effective this is, but everything seems to work
fine with this change so let's apply the same to mainline just
to be sure.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.

However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.

Change it to that instead.

Fixes: 143bb9ad ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

As of commit 4ff028f6 ("ASoC: qcom: lpass-cpu: Make I2S SD lines
configurable"), lpass now supports children nodes to configure the
MI2S SD lines to use for one of the I2S ports. For example:

lpass@7708000 {
	dai@3 {
		reg = <MI2S_QUATERNARY>;
		qcom,playback-sd-lines = <1>;
	};
};

The "reg" property refers to the DAI number in this case,
so we need to set #address-cells and #size-cells appropriately
to avoid DTC warnings.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-1-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

By specifying the modem firmware files, we can boot the modem subsystem
which also gives us wifi.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528185341.4891-1-jeffrey.l.hugo@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The label on the l15 regulator node does not follow the style of the
rest of the regulator nodes.  Luckily, no one has used the label yet,
so lets fix it.

Fixes: 2c6d2d3a ("arm64: dts: qcom: Add Lenovo Miix 630")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528145135.44269-1-jeffrey.l.hugo@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The label on the l15 regulator node does not follow the style of the
rest of the regulator nodes.  Luckily, no one has used the label yet,
so lets fix it.

Fixes: 31c1f0e3 ("arm64: dts: qcom: msm8998: Add RPM and regulators for MTP")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528144814.44143-1-jeffrey.l.hugo@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The modem node has an address of 4080000 and thus should come after tlmm
and before gpu. Move the node to the right place to maintainer proper
address sort order.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Fixes: e14a15eb ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200521010337.229177-1-swboyd@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The ufs-qcom driver checks that the name matches the androidboot.bootdevice
parameter provided by the bootloader, which uses the name ufshc. Without
this change UFS fails to probe.

I think this is broken behavior from the ufs-qcom driver, but using the
name ufshc is consistent with dts for sdm845/sm8150/etc.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200523175232.13721-1-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Other dts have nodes sorted by physical address, be consistent with that.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200523132223.31108-1-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The pm8150 dtsi files refer to it as spmi_bus, so change it.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200523132104.31046-1-jonathan@marek.ca
[bjorn: Dropped qcom, from node name while we're poking at it]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Use the dt-bindings defines for qupv3_id_1 node's clocks.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200523131213.18653-1-jonathan@marek.caSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Pull SafeSetID update from Micah Morton:
 "Add additional LSM hooks for SafeSetID

  SafeSetID is capable of making allow/deny decisions for set*uid calls
  on a system, and we want to add similar functionality for set*gid
  calls.

  The work to do that is not yet complete, so probably won't make it in
  for v5.8, but we are looking to get this simple patch in for v5.8
  since we have it ready.

  We are planning on the rest of the work for extending the SafeSetID
  LSM being merged during the v5.9 merge window"

* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
  security: Add LSM hooks to set*gid syscalls

The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>

Pull btrfs updates from David Sterba:
 "This reverts the direct io port to iomap infrastructure of btrfs
  merged in the first pull request. We found problems in invalidate page
  that don't seem to be fixable as regressions or without changing iomap
  code that would not affect other filesystems.

  There are four reverts in total, but three of them are followup
  cleanups needed to revert a43a67a2 cleanly. The result is the
  buffer head based implementation of direct io.

  Reverts are not great, but under current circumstances I don't see
  better options"

* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: switch to iomap_dio_rw() for dio"
  Revert "fs: remove dio_end_io()"
  Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
  Revert "btrfs: split btrfs_direct_IO to read and write part"

Pull networking fixes from David Miller:

 1) Fix cfg80211 deadlock, from Johannes Berg.

 2) RXRPC fails to send norigications, from David Howells.

 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
    Geliang Tang.

 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.

 5) The ucc_geth driver needs __netdev_watchdog_up exported, from
    Valentin Longchamp.

 6) Fix hashtable memory leak in dccp, from Wang Hai.

 7) Fix how nexthops are marked as FDB nexthops, from David Ahern.

 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.

 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.

10) Fix link speed reporting in iavf driver, from Brett Creeley.

11) When a channel is used for XSK and then reused again later for XSK,
    we forget to clear out the relevant data structures in mlx5 which
    causes all kinds of problems. Fix from Maxim Mikityanskiy.

12) Fix memory leak in genetlink, from Cong Wang.

13) Disallow sockmap attachments to UDP sockets, it simply won't work.
    From Lorenz Bauer.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  net: ethernet: ti: ale: fix allmulti for nu type ale
  net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
  net: atm: Remove the error message according to the atomic context
  bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
  libbpf: Support pre-initializing .bss global variables
  tools/bpftool: Fix skeleton codegen
  bpf: Fix memlock accounting for sock_hash
  bpf: sockmap: Don't attach programs to UDP sockets
  bpf: tcp: Recv() should return 0 when the peer socket is closed
  ibmvnic: Flush existing work items before device removal
  genetlink: clean up family attributes allocations
  net: ipa: header pad field only valid for AP->modem endpoint
  net: ipa: program upper nibbles of sequencer type
  net: ipa: fix modem LAN RX endpoint id
  net: ipa: program metadata mask differently
  ionic: add pcie_print_link_status
  rxrpc: Fix race between incoming ACK parser and retransmitter
  net/mlx5: E-Switch, Fix some error pointer dereferences
  net/mlx5: Don't fail driver on failure to create debugfs
  net/mlx5e: CT: Fix ipv6 nat header rewrite actions
  ...

This reverts commit a43a67a2.

This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.

The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.

Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.

There have been discussions how to fix that, but revert seems to be the
least intrusive option.

Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: David Sterba <dsterba@suse.com>

On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.

This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").

Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().

Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-06-12

The following pull-request contains BPF updates for your *net* tree.

We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).

The main changes are:

1) sock_hash accounting fix, from Andrey.

2) libbpf fix and probe_mem sanitizing, from Andrii.

3) sock_hash fixes, from Jakub.

4) devmap_val fix, from Jesper.

5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>