- 18 Jul, 2018 40 commits
-
-
Keara Leibovitz authored
Create initial unit tests for the tc fw filter. Signed-off-by:
Keara Leibovitz <kleib@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Salvatore Mesoraca authored
We avoid 2 VLAs by using a pre-allocated field in dsa_switch. We also try to avoid dynamic allocation whenever possible (when using fewer than bits-per-long ports, which is the common case). Link: http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Link: http://lkml.kernel.org/r/20180505185145.GB32630@lunn.chSigned-off-by:
Salvatore Mesoraca <s.mesoraca16@gmail.com> [kees: tweak commit subject and message slightly] Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== PTP support for mv88e6165 family The mv88e6165 family of switches supports PTP. It is however not fully compatible with the current PTP support in the mv88e6xxx driver. This patchset adds a level of abstraction to the PTP code, and then adds the code needed to support the mv88e6165 family. v2: Correctly cluster local variables in mv88e6xxx_ptp_setup() Added Acked-by: Richard Cochran <richardcochran@gmail.com> ==================== Signed-off-by: -
Andrew Lunn authored
For slow processors using bit-banging MDIO, 20ms can be too short a timeout when waiting for the transmit timestamp to become available. Double it to 40ms. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Andrew Lunn authored
For the 6352 and newer switches, the PTP Ethertype defaults to ETH_P_1588. Hence it was not explicitly set. The 6165 however defaults to 0. So explicitly set the EtherType. Signed-off-by:
-
Andrew Lunn authored
The 6165 family supports a more restricted version of hardware time stamps. Only L2 PTP is supported. All ports have to use the same EtherType, and transport spec configuration. PTP can only be enabled/disabled globally, not per port. Signed-off-by:
-
Andrew Lunn authored
The 6165 only supports layer L2 PTP, where as the more modern devices also support UDP and UDPv6, i.e. L4. Abstract the supported receive filters. Signed-off-by:
-
Andrew Lunn authored
The 6165 family does not have per port PTP control registers. Also, it places the timestamp data in different registers. Abstract the current implementation of 6352 compatible PTP devices so that 6165 can be added. Signed-off-by:
-
Andrew Lunn authored
The mv88e6165 family has its global clock in the PTP global registers. It does not support any form of PTP events. Add a function to read the clock, fill in an ops structure, and register it with the two members of the family. Signed-off-by:
-
Andrew Lunn authored
The MV88E6165 PTP registers are all in AVB bank F, unlike newer generations which spread them over AVB bank E and F. Implement AVB ops for the MV88E6165 which hides this difference. Signed-off-by:
-
Andrew Lunn authored
The mv88e6165 family supports PTP, but its registers use a different layout to the currently supported devices. Abstract accessing the PTP registers into a set of ops, so making space for a second implementation. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: Drop OF dependency for some Broadcom drivers This patch series drops the CONFIG_OF dependency that some Broadcom drivers had, this is no longer necessary and goes against allowing build testing on more platforms. Let me know if kbuild or your own builds somehow fail. ==================== Signed-off-by: -
Florian Fainelli authored
NET_DSA_BCM_SF2 does not need to depend on CONFIG_OF anymore since we have stubs when that option is disabled. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Both BCMGENET and SYSTEMPORT build just fine with CONFIG_OF=n, we do have a dependency on HAS_IOMEM that was not being reflected for SYSTEMPORT so add that. Signed-off-by:
-
Florian Fainelli authored
The driver builds fine even with CONFIG_OF=n since we now have stubs that are provided. Signed-off-by:
-
YueHaibing authored
After commit eb929a91 ("tipc: improve poll() for group member socket"), it is no longer used. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
YueHaibing authored
tipc_link_is_active is no longer used and can be removed. Signed-off-by:
-
Arnd Bergmann authored
While some of the cavium drivers don't require PCI support, most others do, as shown by these build failures: WARNING: unmet direct dependencies detected for MDIO_THUNDER Depends on [n]: NETDEVICES [=y] && MDIO_BUS [=y] && 64BIT [=y] && PCI [=n] Selected by [y]: - THUNDER_NIC_BGX [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CAVIUM [=y] && 64BIT [=y] - THUNDER_NIC_RGX [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CAVIUM [=y] && 64BIT [=y] drivers/net/ethernet/cavium/thunder/nicvf_main.c: In function 'nicvf_set_irq_affinity': drivers/net/ethernet/cavium/thunder/nicvf_main.c:1095:25: error: implicit declaration of function 'pci_irq_vector'; did you mean 'rcu_irq_enter'? [-Werror=implicit-function-declaration] drivers/net/ethernet/cavium/thunder/nic_main.c: In function 'nic_mbx_intr_handler': drivers/net/ethernet/cavium/thunder/nic_main.c:1135:13: error: implicit declaration of function 'pci_irq_vector'; did you mean 'rcu_irq_enter'? [-Werror=implicit-function-declaration] In file included from drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:27: drivers/net/ethernet/cavium/liquidio/octeon_main.h: In function 'octeon_unmap_pci_barx': drivers/net/ethernet/cavium/liquidio/octeon_main.h:97:3: error: implicit declaration of function 'pci_release_region'; did you mean 'pci_release_regions'? [-Werror=implicit-function-declaration] drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c: In function 'octeon_mbox_process_cmd': drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c:263:3: error: implicit declaration of function 'pcie_capability_set_word'; did you mean 'has_capability_noaudit'? [-Werror=implicit-function-declaration] drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c: In function 'setup_cn23xx_octeon_pf_device': drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1315:22: error: 'data32' is used uninitialized in this function [-Werror=uninitialized] drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c: In function 'cn23xx_dump_vf_iq_regs': include/linux/dynamic_debug.h:135:3: error: 'regval' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/cavium/liquidio/lio_core.c: In function 'octeon_setup_interrupt': drivers/net/ethernet/cavium/liquidio/lio_core.c:1067:17: error: invalid application of 'sizeof' to incomplete type 'struct msix_entry' drivers/net/ethernet/cavium/liquidio/octeon_main.h: In function 'octeon_unmap_pci_barx': drivers/net/ethernet/cavium/liquidio/octeon_main.h:97:3: error: implicit declaration of function 'pci_release_region'; did you mean 'pci_release_regions'? [-Werror=implicit-function-declaration] This adds back the minimum set of dependencies to get everything to build cleanly again, but leaving the ones that build cleanly. Fixes: 7e2bc7fb ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stefano Brivio authored
Commit 784abe24 ("net: Add decrypted field to skb") introduced a 'decrypted' field that is explicitly copied on skb copy and clone. Move it between headers_start[0] and headers_end[0], so that we don't need to copy it explicitly as it's copied by the memcpy() in __copy_skb_header(). While at it, drop the assignment in __skb_clone(), it was already redundant. This doesn't change the size of sk_buff or cacheline boundaries. The 15-bits hole before tc_index becomes a 14-bits hole, and will be again a 15-bits hole when this change is merged with commit 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()"). v2: as reported by kbuild test robot (oops, I forgot to build with CONFIG_TLS_DEVICE it seems), we can't use CHECK_SKB_FIELD() on a bit-field member. Just drop the check for the moment being, perhaps we could think of some magic to also check bit-field members one day. Fixes: 784abe24 ("net: Add decrypted field to skb") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
YueHaibing authored
Fixes the following sparse warnings: drivers/net/ethernet/cavium/liquidio/lio_main.c:3068:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/lio_main.c:2909:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:385:27: warning: Using plain integer as NULL pointer Signed-off-by:
-
Arnd Bergmann authored
These dummy helpers are all intended to be inline functions, but one of them by accident came without the 'inline' keyword, causing a harmless warning: In file included from drivers/net/ethernet/mellanox/mlx5/core/main.c:63: drivers/net/ethernet/mellanox/mlx5/core/accel/tls.h:79:1: error: 'mlx5_accel_tls_add_flow' defined but not used [-Werror=unused-function] mlx5_accel_tls_add_flow(struct mlx5_core_dev *mdev, void *flow, Fixes: ab412e1d ("net/mlx5: Accel, add TLS rx offload routines") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
Smatch caught an uninitialized variable error which GCC seems to miss. Fixes: a25717d2 ("xdp: support simultaneous driver and hw XDP attachment") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Gustavo A. R. Silva authored
The use of the | operator always leads to true, which looks rather suspect in this case. Fix this by using & instead. Addresses-Coverity-ID: 1471903 ("Wrong operator used") Fixes: dba1d918 ("net: mvpp2: debugfs: add entries for classifier flows") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Ganesh Goudar authored
display free rx and tx page count in the meminfo of an adapter. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Introduce initial Spectrum-2 support This patch set adds initial support for the Spectrum-2 ASIC. The first two patches add Spectrum-2 specific KVD linear (KVDL) manager. Unlike the Spectrum ASIC, there is no linear memory and instead the type of the entry (e.g., nexthop) and its index are hashed and the entry is placed in the computed address in the hash-based KVD memory. The third patch adds Spectrum-2 stubs in the multicast routing code. Support for multicast routing will be added later on. Patches 4-15 add ACL support. The Spectrum-2 ASIC includes an algorithmic TCAM (A-TCAM) and a regular circuit TCAM (C-TCAM) for rules that can't be inserted into the A-TCAM. This set does not make use of the A-TCAM and only places rules in the C-TCAM. This provides equivalent scale and performance to the Spectrum ASIC. A follow-up patch set will introduce A-TCAM support. The last patch extends the main driver file to work with both ASICs. ==================== Signed-off-by: -
Jiri Pirko authored
Extend existing driver for Spectrum ASIC to support Spectrum-2 ASIC. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Utilize only C-TCAM for now. Do very minimal A-TCAM initialization in order to make C-TCAM work. Signed-off-by:
-
Ido Schimmel authored
In Spectrum-2, ACL regions that use 8 or 12 key blocks require several consecutive hardware regions. In order to allow defragmentation, the device stores a mapping from a logical region ID to an hardware region ID, which is similar to the page table that is used to translate virtual addresses to physical addresses. Add the region association callback to the region create sequence and implement it as a NOP in Spectrum which does not require it. Signed-off-by:
-
Ido Schimmel authored
Encode each flexible key block in the general block scheme according its block index. Signed-off-by:
-
Ido Schimmel authored
In Spectrum the key (and mask) block layout is very straight forward and every block is 16 bytes aligned. However, in Spectrum-2 the blocks are not even byte aligned, which makes it difficult to encode them using current method. Instead, first encode each block and then encode the block in the general blocks layout. Signed-off-by:
-
Ido Schimmel authored
The PGCR register configures general Policy-Engine settings. Specifically, we are going to use it in order to set the default action base pointer, which determines where the default action (when there is no hit) is located for each region. Signed-off-by:
-
Ido Schimmel authored
The PERERP register configures the region eRPs. It can be used, for example, to enable lookup in the C-TCAM in addition to the A-TCAM. To be able to perform a lookup in the C-TCAM we need to "use" the eRP table. This is done by marking the pointer as valid, but zeroing the eRP table vector. Signed-off-by:
-
Ido Schimmel authored
The PERCR register configures the region parameters such as whether to consult the bloom filter before performing a lookup using a specific eRP. For C-TCAM only usage we don't need to accurately set the master mask. Instead, we can set all of its bits to make sure all the extracted keys are actually used. Signed-off-by:
-
Jiri Pirko authored
The PERAR register is used to associate a hw region for region_id's. Signed-off-by:
-
Jiri Pirko authored
In Spectrum-2, activity cannot be find out by TCAM rule (PTCEv2 register), but rather by associated action set. For that purpose, extend action ops to allow query activity from PEFA register. Block activity is decided according to activity of the first set. Signed-off-by:
-
Jiri Pirko authored
In Spectrum-2, the PEFA register is extend to report if the action set was hit during processing of packets. Introduce this extension and adjust the code around this accordingly. Signed-off-by:
-
Jiri Pirko authored
Introduce key blocks for Spectrum-2 that contains the same elements used already for Spectrum1. Along with that, introduce encoder stub. Signed-off-by:
-
Jiri Pirko authored
In Spectrum-2, no action set is stored directly in TCAM, all are located in KVD linear. So ask core to treat the first set as dummy empty one, to be just used for PTCEV2 purposes. Signed-off-by:
-
Jiri Pirko authored
Add dummy ops for now. The ops are going to be implemented later on. Signed-off-by:
-
Jiri Pirko authored
In Spectrum-2, KVD linear indexes are hashed into KVD hash. Therefore it is possible for multiple resource types to use same indexes. There are multiple index spaces. Also, the index space is bigger than the actual KVD hash area, which allows to have holes in the index space without any penalization. The HW has to be told in case the index for particular resource type is no longer used so it can be freed from KVD hash. IEDR register is used for that. Signed-off-by:
-
