An error occurred fetching the project authors.
- 13 Apr, 2021 7 commits
-
-
Bodo Stroesser authored
Make data_pages_per_blk changeable similar to the way it is done for max_data_area_mb. One can change the value by typing: echo "data_pages_per_blk=N" >control The value is printed when doing: cat info In addition, a new readonly attribute 'data_pages_per_blk' returns the value on read. Link: https://lore.kernel.org/r/20210324195758.2021-7-bostroesser@gmail.comSigned-off-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bodo Stroesser authored
Replace DATA_PAGES_PER_BLK and DATA_BLOCK_SIZE with new struct elements tcmu_dev->data_pages_per_blk and tcmu_dev->data_blk_size. These new variables are still loaded with constant definition DATA_PAGES_PER_BLK_DEF (= 1) and DATA_PAGES_PER_BLK_DEF * PAGE_SIZE. There is no way yet to set the values via configfs. Link: https://lore.kernel.org/r/20210324195758.2021-6-bostroesser@gmail.comSigned-off-by:
-
Bodo Stroesser authored
There is only one caller of tcmu_get_block_page left. Since it is a one-liner, we can remove the function. Link: https://lore.kernel.org/r/20210324195758.2021-5-bostroesser@gmail.comSigned-off-by:
-
Bodo Stroesser authored
Change tcmu to support DATA_BLOCK_SIZE being a multiple of PAGE_SIZE. There are two reasons why one would like to have a bigger DATA_BLOCK_SIZE: 1) If userspace - e.g. due to data compression, encryption or deduplication - needs to have receive or transmit data in a consecutive buffer, we can define DATA_BLOCK_SIZE to the maximum size of a SCSI READ/WRITE to enforce that userspace sees just one consecutive buffer. That way we can avoid the need for doing data copy in userspace. 2) Using a bigger data block size can speed up command processing in tcmu. The number of free data blocks to look up in bitmap is reduced substantially. The lookup for data pages in radix_tree can be done more efficiently if there are multiple pages in a data block. The maximum number of IOVs to set up is lower so cmd entries in the ring become smaller. Link: https://lore.kernel.org/r/20210324195758.2021-4-bostroesser@gmail.comSigned-off-by: -
Bodo Stroesser authored
Rename some variables and definitions as a first preparation for DATA_BLOCK_SIZE != PAGE_SIZE and add the new DATA_PAGES_PER_BLK definition containing the number of pages per data block. Rename tcmu_try_get_block_page() to tcmu_try_get_data_page(). Keep name tcmu_get_block_page() since it will go away in a following commit when there is only one caller left. Subsequent commits will then add full support for DATA_PAGES_PER_BLK != 1, which also means DATA_BLOCK_SIZE = DATA_PAGES_PER_BLK * PAGE_SIZE Link: https://lore.kernel.org/r/20210324195758.2021-3-bostroesser@gmail.comSigned-off-by:
-
Bodo Stroesser authored
Some definitions and members of struct tcmu_dev had misleading names. Examples: - ring_size was used for the size of mailbox + cmd ring + data area - CMDR_SIZE was used for size of mailbox + cmd ring I added the new definition MB_CMDR_SIZE (mailbox + command ring), changed CMDR_SIZE to hold the size of the command ring only and replaced in struct tcmu_dev the member ring_size with mmap_pages, because the member is now used in tcmu_mmap() only, where we need page count, not size. I also added the new struct tcmu_dev member 'cmdr' which is used to replace some occurences of '(void *)mb + CMDR_OFF' with 'udev->cmdr' for better readability. Link: https://lore.kernel.org/r/20210324195758.2021-2-bostroesser@gmail.comSigned-off-by:
-
Martin K. Petersen authored
Resolve a couple of conflicts between the 5.12 fixes branch and the 5.13 staging tree (iSCSI target and UFS). Signed-off-by:
-
- 06 Apr, 2021 33 commits
-
-
Luo Jiaxing authored
checkpatch reported several whitespace errors. Fix them all. Link: https://lore.kernel.org/r/1616675396-6108-3-git-send-email-luojiaxing@huawei.comSigned-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
checkpatch reported an error in sas_to_ata_err(). switch and case statements are incorrectly indented. Link: https://lore.kernel.org/r/1616675396-6108-2-git-send-email-luojiaxing@huawei.comSigned-off-by:
-
Tian Tao authored
Remove unnecessary include of linux/version.h. Link: https://lore.kernel.org/r/1617283618-19346-1-git-send-email-tiantao6@hisilicon.comSigned-off-by:
Tian Tao <tiantao6@hisilicon.com> Signed-off-by:
Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by:
-
Wan Jiabing authored
struct bfa_fcs_s is declared twice. First is declared at line 50, remove the duplicate. struct bfa_fcs_fabric_s is defined at line 175, remove unnecessary declaration. Link: https://lore.kernel.org/r/20210401063535.992487-1-wanjiabing@vivo.comSigned-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Fix the following out-of-bounds warnings by enclosing some structure members into new structure objects upiu_req and upiu_rsp: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] Refactor the code by making it more structured. The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). Now that a new struct _upiu_req_ enclosing all those adjacent members is introduced, memcpy() doesn't overrun the length of &treq.req_header, because the address of the new struct object _upiu_req_ is used as the destination, instead. The same problem is present when memcpy() overruns the length of the source &treq.rsp_header; in this case the address of the new struct object _upiu_rsp_ is used, instead. Also, this helps with the ongoing efforts to enable -Warray-bounds and avoid confusing the compiler. Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60640558.lsAxiK6otPwTo9rv%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210331224338.GA347171@embeddedorReported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Yang Yingliang authored
The spinlock and list head of fnic_list are initialized statically. It is unnecessary to initialize them. Link: https://lore.kernel.org/r/20210330125911.1050879-1-yangyingliang@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
zhouchuangao authored
BUG_ON() uses unlikely in if() which can be optimized at compile time. Link: https://lore.kernel.org/r/1617108361-6870-1-git-send-email-zhouchuangao@vivo.comSigned-off-by:
zhouchuangao <zhouchuangao@vivo.com> Signed-off-by:
-
Sreekanth Reddy authored
While diag reset is in progress there is short duration where all access to controller's PCI config space from the host needs to be blocked. This is due to a hardware limitation of the IOC controllers. Block all access to controller's config space from userland applications by calling pci_cfg_access_lock() while diag reset is in progress and unlocking it again after the controller comes back to ready state. Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.4.108+ Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
Covert ActiveCablePowerRequirement's value to target CPU endian before displaying it. Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
Whenever the driver is adding a vSES to virtual-phys list it is reinitializing the list head. Hence those vSES devices which were added previously are lost. Stop reinitializing the list every time a new vSES device is added. Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.11.10+ Signed-off-by:
-
Konstantin Shelekhin authored
Create the device for the virtual LUN 0 using the DUMMY flag. This change makes it possible to remove some special-casing in the INQUIRY code. Link: https://lore.kernel.org/r/20210322200938.53300-3-k.shelekhin@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
-
Konstantin Shelekhin authored
This commit adds the DUMMY flag to the rd_mcp backend that forces a logical unit to report itself as not connected device of an unknown type. Essentially this allows users to create devices identical to the device for the virtual LUN 0, making it possible to explicitly create a LUN 0 device and configure its WWNs (e.g. vendor or product name). Link: https://lore.kernel.org/r/20210322200938.53300-2-k.shelekhin@yadro.comReviewed-by:
-
Ewan D. Milne authored
Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the RTPG extended header so remove the check for INVALID FIELD IN CDB. Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.comReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
John Pittman authored
Due to the frequency that alua_rtpg() is called, the path group info print within can print the same info multiple times in the logs, subsequent prints adding no new information or value. To reproduce: # modprobe scsi_debug vpd_use_hostno=0 # systemctl start multipathd.service To fix, check stored values, only printing at alua attach/activate and if any of the values change. Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.comReviewed-by:David Jeffery <djeffery@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
John Pittman <jpittman@redhat.com> Signed-off-by:
-
Martin Wilck authored
rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with srp_reconnect_work(), a warning is printed: Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18. Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------ Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22 Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace: Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90 Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp] Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp] Avoid this by not trying to block targets for rports in SRP_PORT_LOST state. Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Roman Bolshakov authored
target_sequencer_start event is triggered inside target_cmd_init_cdb(). se_cmd.tag is not initialized with ITT at the moment so the event always prints zero tag. Link: https://lore.kernel.org/r/20210403215415.95077-1-r.bolshakov@yadro.com Cc: stable@vger.kernel.org # 5.10+ Reviewed-by:
-
Viswas G authored
Inbound and outbound queues were not properly configured and that lead to MPI configuration failure. Fixes: 05c6c029 ("scsi: pm80xx: Increase number of supported queues") Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.comReported-and-tested-by:
Ash Izat <ash@ai0.uk> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Signed-off-by:
-
Don Brace authored
Update version. Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhildaReviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Kevin Barnett authored
Add support for newer hardware. Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Correct system hangs when resuming from hibernation after first successful hibernation/resume cycle. Rare condition involving OFA. Note: Suspend/resume is not supported on many platforms. It was originally intended for workstations. Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhildaReviewed-by:
-
Murthy Bhat authored
Update enclosure identifier field corresponding to physical devices in lsscsi/sysfs. During device add the SCSI devtype is filled in during slave_configure(). However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns zero for the SCSI devtype field, and valid devtype is overwritten by zero. Due to this, lsscsi output shows wrong values. Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhildaReviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Kevin Barnett authored
LUN resets can take longer to complete. Adding in more driver logging helps show where the driver is in the reset process. Add a timeout in pqi_device_wait_for_pending_io() to cap how long the driver will wait for outstanding commands. Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhildaReviewed-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Reviewed-by:
-
Murthy Bhat authored
Export valid sas initiator_port_protocols and target_port_protocols to sysfs. Needed for lsscsi to show correct values. Link: https://lore.kernel.org/r/161549384532.25025.1469409935400845385.stgit@brunhildaReviewed-by:
-
Murthy Bhat authored
Display topology using PHY numbers. PHY (both local and remote) numbers corresponding to physical drives are read from BMIC_IDENTIFY_PHYSICAL_DEVICE. Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
The entire Linux kernel has been slowly migrating from snprintf() to scnprintf(), so we are doing our part. This article explains the rationale for this change: https: //lwn.net/Articles/69419/ Link: https://lore.kernel.org/r/161549383357.25025.12363435617789964291.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
- Synchronize OFA and controller offline events. Prevent I/O during the above conditions. - Cleanup pqi_device_wait_for_pending_io() by checking the device->scsi_cmds_outstanding instead of walking the device's list of commands. - Stop failing all I/O for all devices. This was causing OS to retry them, delaying OFA. - Clean up cache flush. The controller is checked for offline status in lower level functions. Link: https://lore.kernel.org/r/161549382770.25025.789855864026860170.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Change return type from EINPROGRESS to EBUSY to signal applications to retry a REGNEWD if the driver cannot process the REGNEWD. Events such as OFA, suspend, and shutdown return EINPROGRESS if a scan is currently running. This prevents applications from immediately retrying REGNEWD. Schedule a new REGNEWD if system low on memory. Link: https://lore.kernel.org/r/161549382157.25025.16054784597622125373.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
OFA, Online Firmware Activation, allows users to update firmware without a reboot. - Change OFA setup to a worker thread - Delay soft resets - Add OFA event handler to allow FW to initiate OFA - Add in-memory allocation to OFA events - Update OFA buffer size calculations - Add ability to cancel OFA events - Update OFA quiesce/un-quiesce - Prevent Kernel crashes while issuing ioctl during OFA - Returned EBUSY for pass-through IOCTLs throughout all stages of OFA - Add mutex to prevent parallel OFA updates. Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Simplify AIO retry management by removing retry list and list management. Need to retry is already set in the response status. Also remove the bypass worker thread. Accelerated I/O requests bypass the RAID engine and go directly to either an HBA disk or to a physical component of a RAID volume. Link: https://lore.kernel.org/r/161549380976.25025.11776487034357231156.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
For suspend/resume and shutdown prevent: Controller events, any new I/O requests, controller requests, REGNEWD, and reset operations. Wait for any pending completions from the controller to complete to avoid controller NMI events. Link: https://lore.kernel.org/r/161549380398.25025.12266769502766103580.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Remove some flags used to check for device resets already in progress. Allow only 1 reset operation at a time for the host. Link: https://lore.kernel.org/r/161549379810.25025.10194117431886743795.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows controller firmware updates without a reboot. OFA updates require an on-line controller reset to activate the updated firmware. There were some missing actions for some of the reset cases. The controller is first set back to sis mode before returning to pqi mode. Check to ensure the controller is in sis mode. Release QRM memory (OFA buffer) on OFA error conditions. Clean up controller state which can cause a kernel panic upon reboot after an unsuccessful OFA. Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Change the data types for event_id and additional_event_id. Link: https://lore.kernel.org/r/161549378628.25025.14338046567871170916.stgit@brunhildaReviewed-by:
-
