- 18 Nov, 2020 3 commits
-
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_trigger() to soc-component as snd_soc_component_compr_trigger(). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87d00h7v7k.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_free() to soc-component as snd_soc_component_compr_free(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_open() to soc-component as snd_soc_component_compr_open(). Signed-off-by:
-
- 17 Nov, 2020 5 commits
-
-
Geert Uytterhoeven authored
Some entries used 7 or 8 spaces instead if a single TAB. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201110174904.3413846-1-geert@linux-m68k.orgSigned-off-by:
-
Geert Uytterhoeven authored
The Intel Keem Bay audio module is only present on Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about this driver when configuring a kernel without Intel Keem Bay platform support. Fixes: c544912b ("ASoC: Intel: Add makefiles and kconfig changes for KeemBay") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110145001.3280479-1-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
The Freescale/NXP AUDIO TO HDMI TX module is only present on NXP i.MX 8 Series SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without i.MX 8 platform support. Fixes: 8a24c834 ("ASoC: fsl_aud2htx: Add aud2htx module driver") Signed-off-by:
-
Bogdan Togorean authored
Audio ADI reference designs are also used on some ZynqMP boards, and can also be used on Intel FPGA boards and also on some more complex FPGA combinations (FPGA cards connected through PCIe). This change removes the dependency on Microblaze and Zynq architectures to allow the usage of this driver for the systems described above. Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201110152213.37811-1-alexandru.ardelean@analog.comSigned-off-by:
-
Alexandru Ardelean authored
This change converts the old device-tree binding for ADAU1977 from text format to the new yaml format. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201110084754.46756-1-alexandru.ardelean@analog.comSigned-off-by:
-
- 16 Nov, 2020 16 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: catpt: Offload fixes and code optimization" from Cezary Rojewski <cezary.rojewski@intel.com>: First two of the series address bugs connected mainly to offload streams: - scenarios with very low buffer sizes: RESET_STREAM IPC timeouts - fix lp clock selection when switching between PAUSE <-> RESUME states: glitches on first offload when no additional stream is opened simultaneously Follow ups are: code reduction and optimization oriented patches. This has been foretold in: [PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point https://www.spinics.net/lists/alsa-devel/msg116440.html Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. First, optimize applying of user settings - prevent redundand calls from happening - and then as mentioned above, streamline power on/off sequence for LPT and WPT. Cezary Rojewski (5): ASoC: Intel: catpt: Skip position update for unprepared streams ASoC: Intel: catpt: Correct clock selection for dai trigger ASoC: Intel: catpt: Optimize applying user settings ASoC: Intel: catpt: Streamline power routines across LPT and WPT ASoC: Intel: catpt: Cleanup after power routines streamlining sound/soc/intel/catpt/core.h | 10 ++- sound/soc/intel/catpt/device.c | 18 +++--- sound/soc/intel/catpt/dsp.c | 56 ++-------------- sound/soc/intel/catpt/pcm.c | 113 ++++++++++++++++----------------- 4 files changed, 74 insertions(+), 123 deletions(-) -- 2.17.1 base-commit: 3650b228
-
Mark Brown authored
Merge series "ASoC: pcm512x: Patch series to set fmt from `set_fmt()`" from Kirill Marinushkin <kmarinushkin@birdec.com>: Set format from `set_fmt()` func instead of `hw_params()`, plus supportive commits Kirill Marinushkin (4): ASoC: pcm512x: Fix not setting word length if DAIFMT_CBS_CFS ASoC: pcm512x: Rearrange operations in `hw_params()` ASoC: pcm512x: Move format check into `set_fmt()` ASoC: pcm512x: Add support for more data formats sound/soc/codecs/pcm512x.c | 134 ++++++++++++++++++++++++++++----------------- 1 file changed, 84 insertions(+), 50 deletions(-) -- 2.13.6
-
V Sujith Kumar Reddy authored
Register shutdown handler to stop sc7180 lpass platform driver and to disable audio clocks. Signed-off-by:
V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1605292702-25046-1-git-send-email-srivasam@codeaurora.orgSigned-off-by:
-
V Sujith Kumar Reddy authored
Add 32 bit format support for capture in lpass-sc7180 snd_soc_dai_driver capabilities. Need to add contstraints in machine driver so that only specific format allowed. Signed-off-by:
-
Kai Vehmanen authored
Add Kconfig entries, PCI ID and chip info for Alderlake-S product. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201116142642.2106067-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Jerome Brunet authored
When compiled with CONFIG_HAVE_CLK, the kernel need to get provider for the clock API. This is usually selected by the platform and the sound drivers should not really care about this. However COMPILE_TEST is special and the platform required may not have been selected, leading to this type of error: > aiu-encoder-spdif.c:(.text+0x3a0): undefined reference to `clk_set_parent' Since we need a sane provider of the API with COMPILE_TEST, depends on COMMON_CLK. Fixes: 6dc4fa17 ("ASoC: meson: add axg fifo base driver") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201116172423.546855-1-jbrunet@baylibre.comSigned-off-by:
-
Dan Carpenter authored
The "no_headphone" variable is never set to "false" so it could be uninitialized. Fixes: e936619b ("ASoC: qcom: sc7180: Modify machine driver for sound card") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201116125950.GA44063@mwandaSigned-off-by:
-
Cezary Rojewski authored
With LPT switching to WPT-based power on/off routines, functions that have been previously used by it are rendered redundant so remove them. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20201116133332.8530-6-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
There is no need for separate power on/off routines for LPT and WPT as as the protocol is shared for both platforms. Make WPT routines generic and reuse them in LPT case too. Signed-off-by:
-
Cezary Rojewski authored
Initial user settings such as volume control need to be applied only once after stream is allocated. As prepare() operation can be invoked multiple times during the stream's lifetime, relocate catpt_dai_apply_usettings() and call it directly within catpt_dai_hw_params() rather than on every catpt_dai_prepare(). catpt_dai_apply_usettings() remains unchanged. Signed-off-by:
-
Cezary Rojewski authored
During stream start DSP firmware requires LPCS disabled as that moment in time is resource heavy. Currently high-clock is selected on start of second stream onwards while low-clock is re-selected before stream actually leaves RESUME state i.e. PAUSE_STREAM call. Fix this by always updating clock before RESUME_STREAM and directly after PAUSE_STREAM. Fixes: a126750f ("ASoC: Intel: catpt: PCM operations") Signed-off-by:
-
Cezary Rojewski authored
Playing with very low period sizes may lead to timeouts when awaiting RESET_STREAM reply for offload streams. This is caused by NOTIFY_POSITION appearing in the middle of trigger(stop). Stream is unprepared during trigger(stop) where PAUSE_STREAM IPC gets invoked. However, all data that is already mixed in DSP firmware's mixer stream will still be played regardless of the pause. For offload streams, this means possibility for another NOTIFY_POSITION to process. Keep these notifications in check by only handling them when stream is in prepared state. Fixes: a126750f ("ASoC: Intel: catpt: PCM operations") Signed-off-by:
-
Kirill Marinushkin authored
Currently, pcm512x driver supports only I2S data format. This commit adds RJ, LJ, DSP_A and DSP_B as well. I don't expect regression WRT existing sound cards, because: * default value in corresponding register of pcm512x codec is 0 == I2S * existing in-tree sound cards with pcm512x codec are configured for I2S * i don't see how existing off-tree sound cards with pcm512x codec could be configured differently - it would not work * tested explicitly, that there is no regression with Raspberry Pi + sound card `sound/soc/bcm/hifiberry_dacplus.c` Signed-off-by:
Kirill Marinushkin <kmarinushkin@birdec.com> Cc: Mark Brown <broonie@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Matthias Reichl <hias@horus.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20201115122306.18164-5-kmarinushkin@birdec.comSigned-off-by:
-
Kirill Marinushkin authored
I would like to describe the reasoning by quoting Peter Ujfalusi <peter.ujfalusi@ti.com> from his review of this patch series v1 [1]: > When you bind a link you will use set_fmt for the two sides to see if > they can agree, that both can support what has been asked. > > The pcm512x driver just saves the fmt and say back to that card: > whatever, I'm fine with it. But runtime during hw_params it can fail due > to unsupported bus format, which it actually acked to be ok. > > This is the difference. > > Sure, some device have constraint based on the fmt towards the hw_params > and it is perfectly OK to do such a checks and rejections or build > rules/constraints based on fmt, but failing hw_params just because > set_fmt did not checked that the bus format is not even supported is not > a nice thing to do. [1] https://patchwork.kernel.org/project/alsa-devel/patch/ 20201109212133.25869-1-kmarinushkin@birdec.com/ Signed-off-by:
-
Kirill Marinushkin authored
This commit is a preparation for the next patch in the series. It's goal is to make format check easy-to-move-out. Theoretically, more butifications are possile in `hw_params()` func, but my intention in this commit is to keep behaviour unchanged. Signed-off-by:
-
Kirill Marinushkin authored
In `pcm512x_hw_params()`, the following switch-case: ~~~~ switch (pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: ~~~~ returns 0, which was preventing word length from being written into codecs register. Fixed by writing it into register before checking `SND_SOC_DAIFMT_MASTER_MASK`. Tested with Raspberry Pi + sound card `hifiberry_dacplus` in CBS_CFS format Signed-off-by:
-
- 13 Nov, 2020 7 commits
-
-
Mark Brown authored
Merge series "ASoC: use inclusive language for bclk/fsync/topology" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: The SOF (Sound Open Firmware) tree contains a lot of references in topology files to 'codec_slave'/'codec_master' terms, which in turn come from alsa-lib and ALSA/ASoC topology support at the kernel level. These terms are no longer compatible with the guidelines adopted by the kernel community [1], standard organizations, and need to change in backwards-compatible ways. The main/secondary terms typically suggested in guidelines don't mean anything for clocks, this patchset suggests instead the use of 'provider' and 'consumer' terms, with the 'codec' prefix kept to make it clear that the codec is the reference. The CM/CS suffixes are also replaced by CP/CC. It can be argued that the change of suffix is invasive, but finding a replacement that keeps the M and S shortcuts has proven difficult in quite a few contexts. The previous definitions are kept for backwards-compatibility so this change should not have any functional impact. It is suggested that new contributions only use the new terms but there is no requirement to transition immediately to the new definitions for existing code. Intel will however update all its past contributions related to bit clock/frame sync configurations immediately. This patchset contains the kernel changes only, the alsa-lib changes were shared separately. Feedback welcome ~Pierre [1] https://lkml.org/lkml/2020/7/4/229 Pierre-Louis Bossart (4): ASoC: topology: use inclusive language for bclk and fsync ASoC: SOF: use inclusive language for bclk and fsync ASoC: Intel: atom: use inclusive language for SSP bclk/fsync ASoC: Intel: keembay: use inclusive language for bclk and fsync include/sound/soc-dai.h | 32 +++++++++++++++--------- include/sound/sof/dai.h | 16 ++++++++---- include/uapi/sound/asoc.h | 22 ++++++++++------ sound/soc/intel/atom/sst-atom-controls.c | 12 ++++----- sound/soc/intel/atom/sst-atom-controls.h | 4 +-- sound/soc/intel/keembay/kmb_platform.c | 22 ++++++++-------- sound/soc/intel/keembay/kmb_platform.h | 8 +++--- sound/soc/soc-topology.c | 24 +++++++++--------- sound/soc/sof/topology.c | 18 ++++++------- 9 files changed, 89 insertions(+), 69 deletions(-) -- 2.25.1
-
Oder Chiou authored
The patch adds a new property to the drice tree for the DMIC clcok driving. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20201113055400.11242-2-oder_chiou@realtek.comSigned-off-by:
-
Oder Chiou authored
The patch adds a new property to set the DMIC clock driving. Signed-off-by:
-
Pierre-Louis Bossart authored
Use 'clock provider' and 'clock consumer' terms. Signed-off-by:
-
Pierre-Louis Bossart authored
Use 'provider' and 'consumer' terms. Signed-off-by:
-
Pierre-Louis Bossart authored
Mirror alsa-lib definitions w/ codec_provider (CP) and codec_consumer (CC). Signed-off-by:
-
Pierre-Louis Bossart authored
Mirror suggested changes in alsa-lib. Signed-off-by:
-
- 12 Nov, 2020 9 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: Kconfig corrections" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Three cosmetic patches and a fix for a randconfig issue. v2: rebase to remove git am issue (worked with --3way before) Pierre-Louis Bossart (1): ASoC: SOF: Intel: fix Kconfig dependency for SND_INTEL_DSP_CONFIG Randy Dunlap (3): ASoC: SOF: imx: fix Kconfig punctuation ASoC: SOF: Kconfig: fix Kconfig punctuation and wording ASoC: SOF: Intel: fix Kconfig punctuation and wording sound/soc/sof/Kconfig | 42 ++++++++++++------------ sound/soc/sof/imx/Kconfig | 10 +++--- sound/soc/sof/intel/Kconfig | 64 ++++++++++++++++++------------------- 3 files changed, 58 insertions(+), 58 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "Support SC7180 sound card variation without headset" from xuyuqing <xuyuqing@huaqin.corp-partner.google.com>: Use compatible string to let machine driver handle the case where ALC5682 headset codec is replaced with ADAU7002 dmic codec xuyuqing (2): ASoC: google: dt-bindings: add new compatible for sc7180-coachz ASoC: qcom: sc7180: Add machine driver for sound card .../bindings/sound/google,sc7180-trogdor.yaml | 4 +- sound/soc/qcom/Kconfig | 1 + sound/soc/qcom/sc7180.c | 86 ++++++++++++++++--- 3 files changed, 77 insertions(+), 14 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: soundwire: SDCA device quirk and cleanups" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Add one quirk to handle new TigerLake-SDCA device and cleanup code. Pierre-Louis Bossart (4): ASoC: Intel: sof_sdw: add quirk for new TigerLake-SDCA device ASoC: codecs: rt*.c: remove useless pointer cast ASoC: rt711: remove warnings ASoC: codecs: max98373-sdw: align regmap use with other codecs sound/soc/codecs/max98373-sdw.c | 2 +- sound/soc/codecs/rt1308-sdw.c | 2 +- sound/soc/codecs/rt5682-sdw.c | 2 +- sound/soc/codecs/rt700.c | 2 +- sound/soc/codecs/rt711-sdw.c | 15 ++++++++------- sound/soc/codecs/rt711.c | 2 +- sound/soc/codecs/rt715.c | 2 +- sound/soc/intel/boards/sof_sdw.c | 10 ++++++++++ 8 files changed, 24 insertions(+), 13 deletions(-) -- 2.25.1
-
Mark Brown authored
The first patch fixed a wrong free in wm8997_probe. The remaining three patches fixed PM disable depth imbalance on error handling. Zhang Qilong (4): ASoC: arizona: Fix a wrong free in wm8997_probe ASoC: arizona: Fix PM disable depth imbalance on error ASoC: wm8994: Fix PM disable depth imbalance on error ASoC: wm8998: Fix PM disable depth imbalance on error sound/soc/codecs/wm8994.c | 6 +++++- sound/soc/codecs/wm8997.c | 8 ++++++-- sound/soc/codecs/wm8998.c | 4 +++- 3 files changed, 14 insertions(+), 4 deletions(-) -- 2.25.4
-
Fabio Estevam authored
The imx-ssi driver was only used by i.MX non-DT platforms. Since 5.10-rc1, i.MX has been converted to a DT-only platform and all board files are gone. Remove the imx-ssi audio driver as there are no more users at all. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201110203937.25684-6-festevam@gmail.comSigned-off-by:
-
Fabio Estevam authored
SND_SOC_IMX_SSI was only used by i.MX non-DT platforms. SND_SOC_EUKREA_TLV320 already selects the SND_SOC_FSL_SSI symbol, which is enough. Remove the unneeded SND_SOC_IMX_SSI selection. Signed-off-by:
-
Fabio Estevam authored
The imx-mc13783 was used on imx27-pdk and imx31-pdk non-DT platforms. Since 5.10-rc1, i.MX has been converted to a DT-only platform and all board files are gone. Remove the imx-mc13783 audio machine driver as there is no user at all. Signed-off-by:
-
Fabio Estevam authored
Since commit e1324ece ("ARM: imx: Remove i.MX35 board files"), the MACH_PCM043 and MACH_PCA100 non-DT platform are no longer supported, so get rid of their machine audio driver too. Signed-off-by:
-
Fabio Estevam authored
Since commit 879c0e5e ("ARM: imx: Remove i.MX27 board files"), the MACH_IMX27_VISSTRIM_M10 non-DT platform is no longer supported, so get rid of its machine audio driver too. Signed-off-by:
-
