To allow for two-step component registration, expose
snd_soc_component_initialize function and move it back to soc-core.c.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The various list iterators are able to handle an empty list.
The only effect of avoiding the loop is not initializing some
index variables.
Drop list_empty tests in cases where these variables are not
used.

The semantic patch that makes these changes is as follows:
(http://coccinelle.lip6.fr/)

<smpl>
@@
expression x,e;
iterator name list_for_each_entry;
statement S;
identifier i;
@@

-if (!(list_empty(x))) {
   list_for_each_entry(i,x,...) S
- }
 ... when != i
? i = e

@@
expression x,e;
iterator name list_for_each_entry_safe;
statement S;
identifier i,j;
@@

-if (!(list_empty(x))) {
   list_for_each_entry_safe(i,j,x,...) S
- }
 ... when != i
     when != j
(
  i = e;
|
? j = e;
)

@@
expression x,e;
iterator name list_for_each;
statement S;
identifier i;
@@

-if (!(list_empty(x))) {
   list_for_each(i,x) S
- }
 ... when != i
? i = e

@@
expression x,e;
iterator name list_for_each_safe;
statement S;
identifier i,j;
@@

-if (!(list_empty(x))) {
   list_for_each_safe(i,j,x) S
- }
 ... when != i
     when != j
(
  i = e;
|
? j = e;
)

// -------------------

@@
expression x,e;
statement S;
identifier i;
@@

-if (!(list_empty(x)))
   list_for_each_entry(i,x,...) S
 ... when != i
? i = e

@@
expression x,e;
statement S;
identifier i,j;
@@

-if (!(list_empty(x)))
   list_for_each_entry_safe(i,j,x,...) S
 ... when != i
     when != j
(
  i = e;
|
? j = e;
)

@@
expression x,e;
statement S;
identifier i;
@@

-if (!(list_empty(x)))
   list_for_each(i,x) S
 ... when != i
? i = e

@@
expression x,e;
statement S;
identifier i,j;
@@

-if (!(list_empty(x)))
   list_for_each_safe(i,j,x) S
 ... when != i
     when != j
(
  i = e;
|
? j = e;
)
</smpl>

---

 drivers/media/pci/saa7134/saa7134-core.c                      |   14 ++---
 drivers/media/usb/cx231xx/cx231xx-core.c                      |   16 ++----
 drivers/media/usb/tm6000/tm6000-core.c                        |   24 +++-------
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c |   13 ++---
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c    |    5 --
 drivers/net/ethernet/sfc/ptp.c                                |   20 +++-----
 drivers/net/wireless/ath/dfs_pattern_detector.c               |   15 ++----
 sound/soc/intel/atom/sst/sst_loader.c                         |   10 +---
 sound/soc/intel/skylake/skl-pcm.c                             |    8 +--
 sound/soc/intel/skylake/skl-topology.c                        |    5 --
 10 files changed, 53 insertions(+), 77 deletions(-)

PulseAudio (and perhaps other userspace utilities) can not detect any
jack for rk3399_gru_sound as the driver doesn't expose related Jack
kcontrols.

This patch adds two DAPM pins to the headset jack, where the
snd_soc_card_jack_new() call automatically creates "Headphones Jack" and
"Headset Mic Jack" kcontrols from them.

With an appropriate ALSA UCM config specifying JackControl fields for
the "Headphones" and "Headset" (mic) devices, PulseAudio can detect
plug/unplug events for both of them after this patch.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20200721182709.6895-1-alpernebiyasak@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

According to the WM8962 datasheet, there is no register at address 0x200.

WM8962_GPIO_BASE is just a base address for the GPIO registers and not a
real register, so remove it from wm8962_readable_register().

Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip
its access.

This fixes the following errors:

wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200717135959.19212-1-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use resource_size rather than a verbose computation on
the end and start fields.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1595751933-4952-1-git-send-email-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>

list_for_each_entry_safe is able to handle an empty list.
The only effect of avoiding the loop is not initializing the
index variable.
Drop list_empty tests in cases where these variables are not
used.

Note that list_for_each_entry_safe is defined in terms of
list_first_entry, which indicates that it should not be used on an
empty list.  But in list_for_each_entry_safe, the element obtained by
list_first_entry is not really accessed, only the address of its
list_head field is compared to the address of the list head, so the
list_first_entry is safe.

The semantic patch that makes this change is as follows (with another
variant for the no brace case): (http://coccinelle.lip6.fr/)

<smpl>
@@
expression x,e;
iterator name list_for_each_entry_safe;
statement S;
identifier i,j;
@@
-if (!(list_empty(x))) {
   list_for_each_entry_safe(i,j,x,...) S
- }
 ... when != i
     when != j
(
  i = e;
|
? j = e;
)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1595761112-11003-2-git-send-email-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: KMB: TDM Enablement patches" from Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>:

This patch series is to enable multiple features on the Keembay Platform

Michael Sit Wei Hong (4):
  ASoC: Intel: KMB: Add 8kHz audio support
  ASoC: Intel: KMB: Rework disable channel function
  ASoC: Intel: KMB: Enable TDM audio capture
  dt-bindings: sound: intel,keembay-i2s: Add channel-max property

 .../bindings/sound/intel,keembay-i2s.yaml     |   8 +
 sound/soc/intel/keembay/kmb_platform.c        | 137 +++++++++++++-----
 sound/soc/intel/keembay/kmb_platform.h        |   1 +
 3 files changed, 112 insertions(+), 34 deletions(-)

--
2.17.1

This patcheset is collection of fixes for the TDM input and output the
axg audio architecture. Its fixes:
 - slave mode format setting
 - g12 and sm1 skew offset
 - tdm clock inversion
 - standard daifmt props names which don't require a specific prefix

Jerome Brunet (4):
  ASoC: meson: axg-tdm-interface: fix link fmt setup
  ASoC: meson: axg-tdmin: fix g12a skew
  ASoC: meson: axg-tdm-formatters: fix sclk inversion
  ASoC: meson: cards: remove DT_PREFIX for standard daifmt properties

 sound/soc/meson/axg-tdm-formatter.c | 11 ++++++-----
 sound/soc/meson/axg-tdm-formatter.h |  1 -
 sound/soc/meson/axg-tdm-interface.c | 26 +++++++++++++++++---------
 sound/soc/meson/axg-tdmin.c         | 16 +++++++++++++++-
 sound/soc/meson/axg-tdmout.c        |  3 ---
 sound/soc/meson/meson-card-utils.c  |  2 +-
 6 files changed, 39 insertions(+), 20 deletions(-)

--
2.25.4

This patch switches from .txt base to .yaml base Document.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87mu4cxlo2.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87o8pf3923.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/873659bpbk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adding rt1015 hw_params which set Bit-clock ratio,
PLL and appropriate sys clk specific with RTK1015.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-6-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

DAI link support for RTK 1015 and providing the codec details
depending on the snd_soc_card selected by ACPI ID.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-5-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adding support for ALC1015 RTK codec in machine driver.
Passing specific card structure based on its ACPI ID.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-4-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Passing specific snd_soc_card structure depending on the ACPI ID.
In future we can add other IDs in the ACPI table and pass the structure.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-3-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

As in future our machine driver supports multiple codecs
So changing naming convention of snd_soc_card struct and its fields.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-2-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for voice and BT calls, along with standard
audio output via the speaker, earpiece, headphone jack, HDMI, and
any accessories compatible with Midas boards. This patch also supports
headphone/headset detection and headsets with inline buttons.

[m.szyprowski: adaptation to v5.1+ kernels (DAI links initialization)]
[s.nawrocki: removal of the clk API calls for CODEC MCLK, the jack data
 structure moved to struct midas_priv, coding style and typo fixes,
 conversion to new cpu/codec/dai-node binding]
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200728131111.14334-2-s.nawrocki@samsung.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds documentation of DT biding for the Midas sound complex.
Partially based on the *txt version by Simon Shields <simon@lineageos.org>.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200728131111.14334-1-s.nawrocki@samsung.comSigned-off-by: Mark Brown <broonie@kernel.org>

Reset the device before programming the registers or all programming
will be lost as the device resets registers to default settings.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200730142419.28205-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The header was updated to align with the data sheet to start the GPO_CFG
at GPO_CFG0.  The code was not updated to the change and therefore the
GPO_CFG0 register was not written to.

Fixes: 6617cff6 ("ASoC: tlv320adcx140: Add GPO configuration and drive output config")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200730142419.28205-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

All channels are enabled at boot up, this patch ensures that all
channels are disabled at boot and whenever the function is called.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200730055319.1522-3-michael.wei.hong.sit@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Enable 8kHz audio support for Intel Keem Bay platform.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200730055319.1522-2-michael.wei.hong.sit@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Standard dai format property don't need the "amlogic," prefix.
There nothing amlogic specific about them. Just remove it.

Fixes: 435857e0 ("ASoC: meson: align axg card driver with DT bindings documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-5-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

After carefully checking, it appears that both tdmout and tdmin require the
rising edge of the sclk they get to be synchronized with the frame sync
event (which should be a rising edge of lrclk).

TDMIN was improperly set before this patch. Remove the sclk_invert quirk
which is no longer needed and fix the sclk phase.

Fixes: 1a11d88f ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-4-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

After carefully checking the result provided by the TDMIN on the g12a and
sm1 SoC families, the TDMIN skew offset appears to be 3 instead of 2 on the
axg.

Fixes: f01bc67f ("ASoC: meson: axg-tdm-formatter: rework quirks settings")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-3-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

The .set_fmt() callback of the axg tdm interface incorrectly
test the content of SND_SOC_DAIFMT_MASTER_MASK as if it was a
bitfield, which it is not.

Implement the test correctly.

Fixes: d60e4f1e ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-2-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add General Purpose Output (GPO) configuration and driver output
configuration.  The GPOs can be configured as a GPO, IRQ, SDOUT or a
PDMCLK output.  In addition the output drive can be configured with
various configurations.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728160833.24130-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add properties for configuring the General Purpose Outputs (GPO). The
GPOs. There are 2 settings for each GPO, configuration and the output drive
type.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728160833.24130-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix white space issues and remove else case where it was not needed.
Convert "static const char *" to "static const char * const"

Fixes: 689c7655 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728164339.16841-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Revert 5b235b55 ("ASoC: dt-bindings: ak4613: switch to yaml base
Documentation") for the time being since it depends on other conversions.
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Silence clk_get() error with dev_dbg() on -EPROBE_DEFER.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Link: https://lore.kernel.org/r/1595564371-13692-1-git-send-email-sw0312.kim@samsung.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "SOF Fixes for S0iX suspend/resume sequence" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:

This set of patches is required for facilitating system S0ix
entry when the DSP is in D0I3. This first patch adds the missing
CORB/RIRB DMA stop and restart to the suspend/resume sequence along
with powering up/down the links. The second patch ensures that the
FW traces are disabled when the system enters S0ix with the DSP in D0I3.

Marcin Rajwa (2):
  ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry
  ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3

 sound/soc/sof/intel/hda-dsp.c | 48 ++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 4 deletions(-)

--
2.25.1

Convert the TAS2562 text file to yaml format.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200723160838.9738-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update the shutdown GPIO property to be shutdown from shut-down.

Fixes: c173dba4 ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200723160838.9738-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch converts Everest Semiconductor ES8316 low power audio
CODEC binding to DT schema.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200724155933.1040501-1-katsuhiro@katsuster.netSigned-off-by: Mark Brown <broonie@kernel.org>

Set the channel number on each AIF widget to allow unused channels not
to be powered up across AIFs.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200728144141.16104-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

We should always disable DMA trace on S0Ix. When staying at S0-D0I3,
we should enable DMA trace while both DMA Trace debug is enabled and
hda_enable_trace_D0I3_S0 is set. This commit corrects the existed
logic errors about that.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch fixes the suspend & resume procedure to allow entry into the
low power states with some streams being active as a wake source - wake on
voice is a perfect example. The current implementation does not stop
the CORB/RIRB DMA and does not power down the HDA links. With firmware's
help, the platform has been able to still enter s0ix state on older
platforms, but the sequence is still incorrect, and the additional
driver actions are needed to ensure correct s0ix behaviour.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-2-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: intel: use asoc_substream_to_rtd()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

I have posted "ASoC: add asoc_substream_to_rtd() macro"
patch-set to ALSA SoC ML (= see Link), and then Pierre-Louis
wanted that Intel patch was separated for boards.

The patches which are not for Intel were already accepted.
This is for Intel, and Intel boards.

Link: https://lore.kernel.org/r/87y2nf0yw2.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/877duz0ysw.wl-kuninori.morimoto.gx@renesas.com

Kuninori Morimoto (2):
  ASoC: intel/boards: use asoc_substream_to_rtd()
  ASoC: intel: use asoc_substream_to_rtd()

 sound/soc/intel/atom/sst-mfld-platform-pcm.c     |  6 +++---
 sound/soc/intel/baytrail/sst-baytrail-pcm.c      | 16 ++++++++--------
 sound/soc/intel/boards/bdw-rt5650.c              |  2 +-
 sound/soc/intel/boards/bdw-rt5677.c              |  4 ++--
 sound/soc/intel/boards/broadwell.c               |  2 +-
 sound/soc/intel/boards/bxt_rt298.c               |  2 +-
 sound/soc/intel/boards/byt-rt5640.c              |  2 +-
 sound/soc/intel/boards/bytcht_da7213.c           |  4 ++--
 sound/soc/intel/boards/bytcr_rt5640.c            |  2 +-
 sound/soc/intel/boards/bytcr_rt5651.c            |  2 +-
 sound/soc/intel/boards/cht_bsw_max98090_ti.c     |  2 +-
 sound/soc/intel/boards/cht_bsw_nau8824.c         |  2 +-
 sound/soc/intel/boards/cht_bsw_rt5645.c          |  2 +-
 sound/soc/intel/boards/cht_bsw_rt5672.c          |  2 +-
 sound/soc/intel/boards/cml_rt1011_rt5682.c       |  4 ++--
 sound/soc/intel/boards/ehl_rt5660.c              |  2 +-
 sound/soc/intel/boards/glk_rt5682_max98357a.c    |  2 +-
 sound/soc/intel/boards/haswell.c                 |  2 +-
 sound/soc/intel/boards/kbl_da7219_max98927.c     |  8 ++++----
 sound/soc/intel/boards/kbl_rt5660.c              |  2 +-
 sound/soc/intel/boards/kbl_rt5663_max98927.c     |  4 ++--
 .../intel/boards/kbl_rt5663_rt5514_max98927.c    |  4 ++--
 sound/soc/intel/boards/skl_nau88l25_max98357a.c  |  2 +-
 sound/soc/intel/boards/skl_nau88l25_ssm4567.c    |  2 +-
 sound/soc/intel/boards/skl_rt286.c               |  2 +-
 sound/soc/intel/boards/sof_da7219_max98373.c     |  2 +-
 sound/soc/intel/boards/sof_maxim_common.c        |  4 ++--
 sound/soc/intel/boards/sof_pcm512x.c             |  4 ++--
 sound/soc/intel/boards/sof_rt5682.c              |  4 ++--
 sound/soc/intel/boards/sof_sdw_rt1308.c          |  2 +-
 sound/soc/intel/boards/sof_wm8804.c              |  2 +-
 sound/soc/intel/haswell/sst-haswell-pcm.c        | 12 ++++++------
 sound/soc/intel/keembay/kmb_platform.c           |  2 +-
 sound/soc/intel/skylake/skl-pcm.c                |  8 ++++----
 34 files changed, 62 insertions(+), 62 deletions(-)

--
2.25.1

Right now the direction of a DAI has to be specified as a literal
number in the device tree, e.g.:

	dai@0 {
		reg = <0>;
		direction = <2>;
	};

but this does not make it immediately clear that this is a
playback/RX-only DAI.

Actually, q6asm-dai.c has useful defines for this. Move them to the
dt-bindings header to allow using them in the dts(i) files.
The example above then becomes:

	dai@0 {
		reg = <0>;
		direction = <Q6ASM_DAI_RX>;
	};

which is immediately recognizable as playback/RX-only DAI.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

PME_EN state needs to restored to the value set by fmw.
For the devices which are not using I2S wake event which gets
enabled by PME_EN bit, keeping PME_EN enabled burns considerable amount
of power as it blocks low power state.
For the devices using I2S wake event, PME_EN gets enabled in fmw and the
state should be maintained after ACP Power On.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200724195600.11798-1-akshu.agrawal@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tuxtydcz.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>