- 22 Aug, 2016 40 commits
-
-
Sachin Prabhu authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 8d9535b6 upstream. When opening a file with O_CREAT flag, check to see if the file opened is an existing directory. This prevents the directory from being opened which subsequently causes a crash when the close function for directories cifs_closedir() is called which frees up the file->private_data memory while the file is still listed on the open file list for the tcon. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reported-by:
Xiaoli Feng <xifeng@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Aurelien Aptel authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit a6b5058f upstream. if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but not any of the path components above: - store the /sub/dir/foo prefix in the cifs super_block info - in the superblock, set root dentry to the subpath dentry (instead of the share root) - set a flag in the superblock to remember it - use prefixpath when building path from a dentry fixes bso#8950 Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit abcfb5d9 upstream. The jbd2 journal stores the commit time in 64-bit seconds and 32-bit nanoseconds, which avoids an overflow in 2038, but it gets the numbers from current_kernel_time(), which uses 'long' seconds on 32-bit architectures. This simply changes the code to call current_kernel_time64() so we use 64-bit seconds consistently. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vineet Gupta authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 3925a16a upstream. LTP madvise05 was generating mm splat | [ARCLinux]# /sd/ltp/testcases/bin/madvise05 | BUG: Bad page map in process madvise05 pte:80e08211 pmd:9f7d4000 | page:9fdcfc90 count:1 mapcount:-1 mapping: (null) index:0x0 flags: 0x404(referenced|reserved) | page dumped because: bad pte | addr:200b8000 vm_flags:00000070 anon_vma: (null) mapping: (null) index:1005c | file: (null) fault: (null) mmap: (null) readpage: (null) | CPU: 2 PID: 6707 Comm: madvise05 And for newer kernels, the system was rendered unusable afterwards. The problem was mprotect->pte_modify() clearing PTE_SPECIAL (which is set to identify the special zero page wired to the pte). When pte was finally unmapped, special casing for zero page was not done, and instead it was treated as a "normal" page, tripping on the map counts etc. This fixes ARC STAR 9001053308 Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Dave Gerlach authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit d2e12e66 upstream. rproc_add adds the newly created remoteproc to a list for use by rproc_get_by_phandle and then does some additional processing to finish adding the remoteproc. This leaves a small window of time in which the rproc is available in the list but not yet fully initialized, so if another driver comes along and gets a handle to the rproc, it will be invalid. Rearrange the code in rproc_add to make sure the rproc is added to the list only after it has been successfuly initialized. Fixes: fec47d86 ("remoteproc: introduce rproc_get_by_phandle API") Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 76bc8e28 upstream. This does not work and does not make sense. So instead of fixing it (probably not hard) just disallow. Reported-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Roderick Colenbrander authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 67f8ecc5 upstream. Many devices use userspace bluetooth stacks like BlueZ or Bluedroid in combination with uhid. If any of these stacks is used with a HID device for which the driver performs a HID request as part .probe (or technically another HID operation), this results in a deadlock situation. The deadlock results in a 5 second timeout for I/O operations in HID drivers, so isn't fatal, but none of the I/O operations have a chance of succeeding. The root cause for the problem is that uhid only allows for one request to be processed at a time per uhid instance and locks out other operations. This means that if a user space is creating a new HID device through 'UHID_CREATE', which ultimately triggers '.probe' through the HID layer. Then any HID request e.g. a read for calibration data would trigger a HID operation on uhid again, but it won't go out to userspace, because it is still stuck in UHID_CREATE. In addition bluetooth stacks are typically single threaded, so they wouldn't be able to handle any requests while waiting on uhid. Lucikly the UHID spec is somewhat flexible and allows for fixing the issue, without breaking user space. The idea which the patch implements as discussed with David Herrmann is to decouple adding of a hid device (which triggers .probe) from UHID_CREATE. The work will kick off roughly once UHID_CREATE completed (or else will wait a tiny bit of time in .probe for a lock). A HID driver has to call HID to call 'hid_hw_start()' as part of .probe once it is ready for I/O, which triggers UHID_START to user space. Any HID operations should function now within .probe and won't deadlock because userspace is stuck on UHID_CREATE. We verified this patch on Bluedroid with Android 6.0 and on desktop Linux with BlueZ stacks. Prior to the patch they had the deadlock issue. [jkosina@suse.cz: reword subject] Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Borislav Petkov authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit bba14295 upstream. c44696ff ("EDAC: Remove arbitrary limit on number of channels") lifted the arbitrary limit on memory controller channels in EDAC. However, the dynamic channel attributes dynamic_csrow_dimm_attr and dynamic_csrow_ce_count_attr remained 6. This wasn't a problem except channels 6 and 7 weren't visible in sysfs on machines with more than 6 channels after the conversion to static attr groups with 2c1946b6 ("EDAC: Use static attribute groups for managing sysfs entries") [ without that, we're exploding in edac_create_sysfs_mci_device() because we're dereferencing out of the bounds of the dynamic_csrow_dimm_attr array. ] Add attributes for channels 6 and 7 along with a guard for the future, should more channels be required and/or to sanity check for misconfigured machines. We still need to check against the number of channels present on the MC first, as Thor reported. Signed-off-by:
Borislav Petkov <bp@suse.de> Reported-by:
Hironobu Ishii <ishii.hironobu@jp.fujitsu.com> Tested-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
-
Amadeusz Sławiński authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 23bc6ab0 upstream. When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by:
Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Andy Shevchenko authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 152bc19e upstream. It seems the commit e5262d05 ("spi: spi-pxa2xx: SPI support for Intel Quark X1000") misses one place to be adapted for Intel Quark, i.e. in reset_sccr1(). Clear all RFT bits when call reset_sccr1() on Intel Quark. Fixes: e5262d05 ("spi: spi-pxa2xx: SPI support for Intel Quark X1000") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Alexey Khoroshilov authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 7dd91d52 upstream. There is the only failure path in efm32_i2c_probe(), where clk_disable_unprepare() is missed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: 1b5b2371 ("i2c: efm32: new bus driver") Signed-off-by:
-
Javier Martinez Canillas authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 6311f126 upstream. When s5p_mfc_remove() calls put_device() for the reserved memory region devs, the driver core warns that the dev doesn't have a release callback: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Also, the declared DMA memory using dma_declare_coherent_memory() isn't relased so add a dev .release that calls dma_release_declared_memory(). Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 29debab0 upstream. The devices don't have a name set, so makes dev_name() returns NULL which makes harder to identify the devices that are causing issues, for example: WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90 Device '(null)' does not have a release() function, it is broken and must be fixed. And after setting the device name: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
-
Alex Hung authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit fc8a601e upstream. Several users reported wifi cannot be unblocked as discussed in [1]. This patch removes the use of the 2009 flag by BIOS but uses the actual WMI function calls - it will be skipped if WMI reports unsupported. [1] https://bugzilla.kernel.org/show_bug.cgi?id=69131Signed-off-by:
Alex Hung <alex.hung@canonical.com> Tested-by:
Evgenii Shatokhin <eugene.shatokhin@yandex.ru> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Mike Snitzer authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit eaf9a736 upstream. Otherwise, there is potential for both DMF_SUSPENDED* and DMF_NOFLUSH_SUSPENDING to not be set during dm_suspend() -- which is definitely _not_ a valid state. This fix, in conjuction with "dm rq: fix the starting and stopping of blk-mq queues", addresses the potential for request-based DM multipath's __multipath_map() to see !dm_noflush_suspending() during suspend. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Florian Echtler authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 6a858815 upstream. Closing the V4L2 device sometimes triggers a kernel oops. Present patch fixes this. Signed-off-by:
Martin Kaltenbrunner <modin@yuri.at> Signed-off-by:
Florian Echtler <floe@butterbrot.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Florian Echtler authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit af766ee0 upstream. The framerate sometimes drops below 60 Hz if the poll interval is too high. Lowering it to the minimum of 1 ms fixes this. Signed-off-by:
-
Jonathan McDowell authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit bbdb34c9 upstream. Fix RC5 decoding with Fintek CIR chipset Commit e87b540b tightened up the RC5 decoding by adding a check for trailing silence to ensure a valid RC5 command had been received. Unfortunately the trailer length checked was 10 units and the Fintek CIR device does not want to provide details of a space longer than 6350us. This meant that RC5 remotes working on a Fintek setup on 3.16 failed on 3.17 and later. Fix this by shortening the trailer check to 6 units (allowing for a previous space in the received remote command). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117221Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Sakari Ailus authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 126f4029 upstream. An earlier patch fixing an input validation issue introduced another issue: vb2_core_dqbuf() is called with pb argument value NULL in some cases, causing a NULL pointer dereference. Fix this by skipping the verification as there's nothing to verify. Fixes: e7e0c3e2 ("[media] videobuf2-core: Check user space planes array in dqbuf") Signed-off-by:
David R <david@unsolicited.net> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
-
Soeren Moch authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit ca6e6126 upstream. Implement memory barriers according to Documentation/circular-buffers.txt: - use smp_store_release() to update ringbuffer read/write pointers - use smp_load_acquire() to load write pointer on reader side - use ACCESS_ONCE() to load read pointer on writer side This fixes data stream corruptions observed e.g. on an ARM Cortex-A9 quad core system with different types (PCI, USB) of DVB tuners. Signed-off-by:
Soeren Moch <smoch@web.de> Signed-off-by:
-
Matthew Leach authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 2a00932f upstream. When disconnecting the usbtv device, the sound card is unregistered from ALSA and the snd member of the usbtv struct is set to NULL. If the usbtv snd_trigger work is running, this can cause a race condition where the kernel will attempt to access free'd resources, shown in [1]. This patch fixes the disconnection code by cancelling any snd_trigger work before unregistering the sound card from ALSA and checking that the snd member still exists in the work function. [1]: usb 3-1.2: USB disconnect, device number 6 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff81093850>] process_one_work+0x30/0x480 PGD 405bbf067 PUD 405bbe067 PMD 0 Call Trace: [<ffffffff81093ce8>] worker_thread+0x48/0x4e0 [<ffffffff81093ca0>] ? process_one_work+0x480/0x480 [<ffffffff81093ca0>] ? process_one_work+0x480/0x480 [<ffffffff81099998>] kthread+0xd8/0xf0 [<ffffffff815c73c2>] ret_from_fork+0x22/0x40 [<ffffffff810998c0>] ? kthread_worker_fn+0x170/0x170 ---[ end trace 0f3dac5c1a38e610 ]--- Signed-off-by:
Matthew Leach <matthew@mattleach.net> Tested-by:
Peter Sutton <foxxy@foxdogstudios.com> Signed-off-by:
-
Linus Walleij authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit f37be01e upstream. The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Linus Walleij authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 9835f1b7 upstream. The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Fixes: 58e21438 ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by:
-
Jan Kiszka authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 5fc8f707 upstream. If MSR_CONFIG_TDP_CONTROL is locked, we currently try to address some MSR 0x80000648 or so. Mask out the relevant level bits 0 and 1. Found while running over the Jailhouse hypervisor which became upset about this strange MSR index. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jim Mattson authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 2f1fe811 upstream. When freeing the nested resources of a vcpu, there is an assumption that the vcpu's vmcs01 is the current VMCS on the CPU that executes nested_release_vmcs12(). If this assumption is violated, the vcpu's vmcs01 may be made active on multiple CPUs at the same time, in violation of Intel's specification. Moreover, since the vcpu's vmcs01 is not VMCLEARed on every CPU on which it is active, it can linger in a CPU's VMCS cache after it has been freed and potentially repurposed. Subsequent eviction from the CPU's VMCS cache on a capacity miss can result in memory corruption. It is not sufficient for vmx_free_vcpu() to call vmx_load_vmcs01(). If the vcpu in question was last loaded on a different CPU, it must be migrated to the current CPU before calling vmx_load_vmcs01(). Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Cao, Lei authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit b244c9fc upstream. With PML enabled, guest will shut down if a PML full VMEXIT occurs during event delivery. According to Intel SDM 27.2.3, PML full VMEXIT can occur when event is being delivered through IDT, so KVM should not exit to user space with error. Instead, it should let EXIT_REASON_PML_FULL go through and the event will be re-injected on the next VMENTRY. Signed-off-by:
Lei Cao <lei.cao@stratus.com> Fixes: 843e4330 ("KVM: VMX: Add PML support in VMX") [Shortened the summary and Cc'd stable.] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Alexis Dambricourt authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 30b072ce upstream. The following #PF may occurs: [ 1403.317041] BUG: unable to handle kernel paging request at 0000000200000068 [ 1403.317045] IP: [<ffffffffc04c20b0>] __mtrr_lookup_var_next+0x10/0xa0 [kvm] [ 1403.317123] Call Trace: [ 1403.317134] [<ffffffffc04c2a65>] ? kvm_mtrr_check_gfn_range_consistency+0xc5/0x120 [kvm] [ 1403.317143] [<ffffffffc04ac11f>] ? tdp_page_fault+0x9f/0x2c0 [kvm] [ 1403.317152] [<ffffffffc0498128>] ? kvm_set_msr_common+0x858/0xc00 [kvm] [ 1403.317161] [<ffffffffc04b8883>] ? x86_emulate_insn+0x273/0xd30 [kvm] [ 1403.317171] [<ffffffffc04c04e4>] ? kvm_cpuid+0x34/0x190 [kvm] [ 1403.317180] [<ffffffffc04a5bb9>] ? kvm_mmu_page_fault+0x59/0xe0 [kvm] [ 1403.317183] [<ffffffffc0d729e1>] ? vmx_handle_exit+0x1d1/0x14a0 [kvm_intel] [ 1403.317185] [<ffffffffc0d75f3f>] ? atomic_switch_perf_msrs+0x6f/0xa0 [kvm_intel] [ 1403.317187] [<ffffffffc0d7621d>] ? vmx_vcpu_run+0x2ad/0x420 [kvm_intel] [ 1403.317196] [<ffffffffc04a0962>] ? kvm_arch_vcpu_ioctl_run+0x622/0x1550 [kvm] [ 1403.317204] [<ffffffffc049abb9>] ? kvm_arch_vcpu_load+0x59/0x210 [kvm] [ 1403.317206] [<ffffffff81036245>] ? __kernel_fpu_end+0x35/0x100 [ 1403.317213] [<ffffffffc0487eb6>] ? kvm_vcpu_ioctl+0x316/0x5d0 [kvm] [ 1403.317215] [<ffffffff81088225>] ? do_sigtimedwait+0xd5/0x220 [ 1403.317217] [<ffffffff811f84dd>] ? do_vfs_ioctl+0x9d/0x5c0 [ 1403.317224] [<ffffffffc04928ae>] ? kvm_on_user_return+0x3e/0x70 [kvm] [ 1403.317225] [<ffffffff811f8a74>] ? SyS_ioctl+0x74/0x80 [ 1403.317227] [<ffffffff815bf0b6>] ? entry_SYSCALL_64_fastpath+0x1e/0xa8 [ 1403.317242] RIP [<ffffffffc04c20b0>] __mtrr_lookup_var_next+0x10/0xa0 [kvm] At mtrr_lookup_fixed_next(), when the condition 'if (iter->index >= ARRAY_SIZE(iter->mtrr_state->fixed_ranges))' becomes true, mtrr_lookup_var_start() is called with iter->range with gargabe values from the fixed MTRR union field. Then, list_prepare_entry() do not call list_entry() initialization, keeping a garbage pointer in iter->range which is accessed in the following __mtrr_lookup_var_next() call. Fixes: f571c097Signed-off-by:
Alexis Dambricourt <alexis@blade-group.com> Signed-off-by:
-
Paul Mackerras authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 93d17397 upstream. It turns out that if the guest does a H_CEDE while the CPU is in a transactional state, and the H_CEDE does a nap, and the nap loses the architected state of the CPU (which is is allowed to do), then we lose the checkpointed state of the virtual CPU. In addition, the transactional-memory state recorded in the MSR gets reset back to non-transactional, and when we try to return to the guest, we take a TM bad thing type of program interrupt because we are trying to transition from non-transactional to transactional with a hrfid instruction, which is not permitted. The result of the program interrupt occurring at that point is that the host CPU will hang in an infinite loop with interrupts disabled. Thus this is a denial of service vulnerability in the host which can be triggered by any guest (and depending on the guest kernel, it can potentially triggered by unprivileged userspace in the guest). This vulnerability has been assigned the ID CVE-2016-5412. To fix this, we save the TM state before napping and restore it on exit from the nap, when handling a H_CEDE in real mode. The case where H_CEDE exits to host virtual mode is already OK (as are other hcalls which exit to host virtual mode) because the exit path saves the TM state. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit f024ee09 upstream. This moves the transactional memory state save and restore sequences out of the guest entry/exit paths into separate procedures. This is so that these sequences can be used in going into and out of nap in a subsequent patch. The only code changes here are (a) saving and restore LR on the stack, since these new procedures get called with a bl instruction, (b) explicitly saving r1 into the PACA instead of assuming that HSTATE_HOST_R1(r13) is already set, and (c) removing an unnecessary and redundant setting of MSR[TM] that should have been removed by commit 9d4d0bdd9e0a ("KVM: PPC: Book3S HV: Add transactional memory support", 2013-09-24) but wasn't. Signed-off-by:
-
Ard Biesheuvel authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 04a84810 upstream. As reported by Zijun, the fdt_check_header() call in __fixmap_remap_fdt() is not safe since it is not guaranteed that the FDT header is mapped completely. Due to the minimum alignment of 8 bytes, the only fields we can assume to be mapped are 'magic' and 'totalsize'. Since the OF layer is in charge of validating the FDT image, and we are only interested in making reasonably sure that the size field contains a meaningful value, replace the fdt_check_header() call with an explicit comparison of the magic field's value against the expected value. Reported-by:
Zijun Hu <zijun_hu@htc.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Caesar Wang authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit ad1cfdf5 upstream. The 2nd additional region is the GIC virtual cpu interface register base and size. As the gic400 of rk3368 says, the cpu interface register map as below : -0x0000 GICC_CTRL . . . -0x00fc GICC_IIDR -0x1000 GICC_IDR Obviously, the region size should be greater than 0x1000. So we should make sure to include the GICC_IDR since the kernel will access it in some cases. Fixes: b790c2ca ("arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board") Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dan O'Donovan authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 0bd50d71 upstream. Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor series, a common lock must be used to prevent concurrent accesses across the 4 GPIO controllers managed by this driver. See Intel Atom Z8000 Processor Series Specification Update (Rev. 005), errata #CHT34, for further information. Signed-off-by:
Dan O'Donovan <dan@emutex.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Loic Poulain authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 32b9ccbc upstream. gpiod_get_optional can return either ERR_PTR or NULL pointer. NULL case is not tested and then dereferenced later in desc_to_gpio. Fix this by using non optional version which returns ERR_PTR in any error case (this is not an optional gpio). Use the same non optional version for the host-wake gpio. Fixes: 765ea3ab ("Bluetooth: hci_intel: Retrieve host-wake IRQ") Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Andy Shevchenko authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 3dbd3212 upstream. The commit d56d6b3d ("gpio: langwell: add Intel Merrifield support") doesn't look at all as a proper support for Intel Merrifield and I dare to say that it distorts the behaviour of the hardware. The register map is different on Intel Merrifield, i.e. only 6 out of 8 register have the same purpose but none of them has same location in the address space. The current case potentially harmful to existing hardware since it's poking registers on wrong offsets and may set some pin to be GPIO output when connected hardware doesn't expect such. Besides the above GPIO and pinctrl on Intel Merrifield have been located in different IP blocks. The functionality has been extended as well, i.e. added support of level interrupts, special registers for wake capable sources and thus, in my opinion, requires a completele separate driver. If someone wondering the existing gpio-intel-mid.c would be converted to actual pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do that. Fixes: d56d6b3d ("gpio: langwell: add Intel Merrifield support") Signed-off-by:
-
Vignesh R authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit a246b819 upstream. NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 0058f087 upstream. When using DMA, half duplex doesn't work properly because rx is not stopped before starting tx. Ensure we call atmel_stop_rx() in the DMA case. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit e51e4d8a upstream. When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe finishes with success but uses invalid (ERR_PTR) values. This leads to dereferencing of ERR_PTR stored under ourport->clk: 12c30000.serial: Controller clock not found (...) 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 Unable to handle kernel paging request at virtual address fffffdfb (clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128) (s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40) (uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c) (uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418) (s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0) (platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0) (driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c) (bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100) (__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c) (bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c) (deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328) (process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac) (worker_thread) from [<c0135320>] (kthread+0xd8/0xf4) (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to exit with failure but the s3c24xx_uart_port is left half-configured (e.g. port->mapbase is set, clk contains ERR_PTR). On next re-probe, the function s3c24xx_serial_init_port() will exit early with success because of configured port->mapbase and driver will use old values, including the ERR_PTR as clock. Fix this by cleaning the port->mapbase on error path so each re-probe will initialize all of the port settings. Fixes: 60e93575 ("serial: samsung: enable clock before clearing pending interrupts during init") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Bjorn Andersson authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 30acf549 upstream. For dm uarts in pio mode tx data is transferred to the fifo register 4 bytes at a time, but care is not taken when these 4 bytes spans the end of the xmit buffer so the loop might read up to 3 bytes past the buffer and then skip the actual data at the beginning of the buffer. Fix this by, analogous to the DMA case, make sure the chunk doesn't wrap the xmit buffer. Fixes: 3a878c43 ("tty: serial: msm: Add TX DMA support") Cc: Ivan Ivanov <iivanov.xz@gmail.com> Reported-by:
Frank Rowand <frowand.list@gmail.com> Reported-by:
Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Tested-by:
Frank Rowand <frank.rowand@am.sony.com> Reviewed-by:
-
Suzuki K Poulose authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 9113c2aa upstream. In smp_prepare_boot_cpu(), we invoke cpuinfo_store_boot_cpu to store the cpuinfo in a per-cpu ptr, before initialising the per-cpu offset for the boot CPU. This patch reorders the sequence to make sure we initialise the per-cpu offset before accessing the per-cpu area. Commit 4b998ff1 ("arm64: Delay cpuinfo_store_boot_cpu") fixed the issue where we modified the per-cpu area even before the kernel initialises the per-cpu areas, but failed to wait until the boot cpu updated it's offset. Fixes: 4b998ff1 ("arm64: Delay cpuinfo_store_boot_cpu") Cc: <stable@vger.kernel.org> # 4.4+ Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 2ce39ad1 upstream. Clearing PSTATE.D is one of the requirements for generating a debug exception. The arm64 booting protocol requires that PSTATE.D is set, since many of the debug registers (for example, the hw_breakpoint registers) are UNKNOWN out of reset and could potentially generate spurious, fatal debug exceptions in early boot code if PSTATE.D was clear. Once the debug registers have been safely initialised, PSTATE.D is cleared, however this is currently broken for two reasons: (1) The boot CPU clears PSTATE.D in a postcore_initcall and secondary CPUs clear PSTATE.D in secondary_start_kernel. Since the initcall runs after SMP (and the scheduler) have been initialised, there is no guarantee that it is actually running on the boot CPU. In this case, the boot CPU is left with PSTATE.D set and is not capable of generating debug exceptions. (2) In a preemptible kernel, we may explicitly schedule on the IRQ return path to EL1. If an IRQ occurs with PSTATE.D set in the idle thread, then we may schedule the kthread_init thread, run the postcore_initcall to clear PSTATE.D and then context switch back to the idle thread before returning from the IRQ. The exception return path will then restore PSTATE.D from the stack, and set it again. This patch fixes the problem by moving the clearing of PSTATE.D earlier to proc.S. This has the desirable effect of clearing it in one place for all CPUs, long before we have to worry about the scheduler or any exception handling. We ensure that the previous reset of MDSCR_EL1 has completed before unmasking the exception, so that any spurious exceptions resulting from UNKNOWN debug registers are not generated. Without this patch applied, the kprobes selftests have been seen to fail under KVM, where we end up attempting to step the OOL instruction buffer with PSTATE.D set and therefore fail to complete the step. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
