- 09 Jun, 2014 4 commits
-
-
Mikulas Patocka authored
commit 62496658 upstream. Mode setting in the TGA driver is broken for these reasons: - info->fix.line_length is set just once in tgafb_init_fix function. If we change videomode, info->fix.line_length is not recalculated - so the video mode is changed but the screen is corrupted because of wrong info->fix.line_length. - info->fix.smem_len is set in tgafb_init_fix to the size of the default video mode (640x480). If we set a higher resolution, info->fix.smem_len is smaller than the current screen size, preventing the userspace program from mapping the framebuffer. This patch fixes it: - info->fix.line_length initialization is moved to tgafb_set_par so that it is recalculated with each mode change. - info->fix.smem_len is set to a fixed value representing the real amount of video ram (the values are taken from xfree86 driver). - add a check to tgafb_check_var to prevent us from setting a videomode that doesn't fit into videoram. - in tgafb_register, tgafb_init_fix is moved upwards, to be called before fb_find_mode (because fb_find_mode already needs the videoram size set in tgafb_init_fix). Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vga.kernel.org Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Kieran Clancy authored
commit 3eba563e upstream. Address a regression caused by commit ad332c8a: (ACPI / EC: Clear stale EC events on Samsung systems) After the earlier patch, there was found to be a race condition on some earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was sometimes discarding a new EC event before its GPE was triggered by the system. In the case of these systems, this meant that the "lid open" event was not registered on resume if that was the cause of the wake, leading to problems when attempting to close the lid to suspend again. After testing on a number of Samsung systems, both those affected by the previous EC bug and those affected by the race condition, it seemed that the best course of action was to process rather than discard the events. On Samsung systems which accumulate stale EC events, there does not seem to be any adverse side-effects of running the associated _Q methods. This patch adds an argument to the static function acpi_ec_sync_query so that it may be used within the acpi_ec_clear loop in place of acpi_ec_query_unlocked which was used previously. With thanks to Stefan Biereigel for reporting the issue, and for all the people who helped test the new patch on affected systems. Fixes: ad332c8a (ACPI / EC: Clear stale EC events on Samsung systems) References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173Reported-by:
Stefan Biereigel <stefan@biereigel.de> Signed-off-by:
Kieran Clancy <clancy.kieran@gmail.com> Tested-by:
Dennis Jansen <dennis.jansen@web.de> Tested-by:
Nicolas Porcel <nicolasporcel06@gmail.com> Tested-by:
Maurizio D'Addona <mauritiusdadd@gmail.com> Tested-by:
Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Tested-by:
Giannis Koutsou <giannis.koutsou@gmail.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Kieran Clancy authored
commit ad332c8a upstream. A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc) continue to log events during sleep (lid open/close, AC plug/unplug, battery level change), which accumulate in the EC until a buffer fills. After the buffer is full (tests suggest it holds 8 events), GPEs stop being triggered for new events. This state persists on wake or even on power cycle, and prevents new events from being registered until the EC is manually polled. This is the root cause of a number of bugs, including AC not being detected properly, lid close not triggering suspend, and low ambient light not triggering the keyboard backlight. The bug also seemed to be responsible for performance issues on at least one user's machine. Juan Manuel Cabo found the cause of bug and the workaround of polling the EC manually on wake. The loop which clears the stale events is based on an earlier patch by Lan Tianyu (see referenced attachment). This patch: - Adds a function acpi_ec_clear() which polls the EC for stale _Q events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is logged if this limit is reached. - Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI system vendor is Samsung. This check could be replaced by several more specific DMI vendor/product pairs, but it's likely that the bug affects more Samsung products than just the five series mentioned above. Further, it should not be harmful to run acpi_ec_clear() on systems without the bug; it will return immediately after finding no data waiting. - Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add() - Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions() References: https://bugzilla.kernel.org/show_bug.cgi?id=44161 References: https://bugzilla.kernel.org/show_bug.cgi?id=45461 References: https://bugzilla.kernel.org/show_bug.cgi?id=57271 References: https://bugzilla.kernel.org/attachment.cgi?id=126801Suggested-by:
Lan Tianyu <tianyu.lan@intel.com> Reviewed-by:
San Zamoyski <san@plusnet.pl> Signed-off-by:
-
Andreas Schwab authored
commit 8fe9c93e upstream. GCC 4.8 now generates out-of-line vr save/restore functions when optimizing for size. They are needed for the raid6 altivec support. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
- 18 May, 2014 35 commits
-
-
Ben Hutchings authored
-
Matthew Daley authored
commit 2145e15e upstream. Do not leak kernel-only floppy_raw_cmd structure members to userspace. This includes the linked-list pointer and the pointer to the allocated DMA space. Signed-off-by:
Matthew Daley <mattd@bugfuzz.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Matthew Daley authored
commit ef87dbe7 upstream. Always clear out these floppy_raw_cmd struct members after copying the entire structure from userspace so that the in-kernel version is always valid and never left in an interdeterminate state. Signed-off-by:
-
Peter Hurley authored
commit 4291086b upstream. The tty atomic_write_lock does not provide an exclusion guarantee for the tty driver if the termios settings are LECHO & !OPOST. And since it is unexpected and not allowed to call TTY buffer helpers like tty_insert_flip_string concurrently, this may lead to crashes when concurrect writers call pty_write. In that case the following two writers: * the ECHOing from a workqueue and * pty_write from the process race and can overflow the corresponding TTY buffer like follows. If we look into tty_insert_flip_string_fixed_flag, there is: int space = __tty_buffer_request_room(port, goal, flags); struct tty_buffer *tb = port->buf.tail; ... memcpy(char_buf_ptr(tb, tb->used), chars, space); ... tb->used += space; so the race of the two can result in something like this: A B __tty_buffer_request_room __tty_buffer_request_room memcpy(buf(tb->used), ...) tb->used += space; memcpy(buf(tb->used), ...) ->BOOM B's memcpy is past the tty_buffer due to the previous A's tb->used increment. Since the N_TTY line discipline input processing can output concurrently with a tty write, obtain the N_TTY ldisc output_lock to serialize echo output with normal tty writes. This ensures the tty buffer helper tty_insert_flip_string is not called concurrently and everything is fine. Note that this is nicely reproducible by an ordinary user using forkpty and some setup around that (raw termios + ECHO). And it is present in kernels at least after commit d945cb9c (pty: Rework the pty layer to use the normal buffering logic) in 2.6.31-rc3. js: add more info to the commit log js: switch to bool js: lock unconditionally js: lock only the tty->ops->write call References: CVE-2014-0196 Reported-and-tested-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: output_lock is a member of struct tty_struct] Signed-off-by:
-
Ben Hutchings authored
Dmitry Semyonov reported that after upgrading from 3.2.54 to 3.2.57 the rtl8192ce driver will crash when its interface is brought up. The oops message shows: [ 1833.611397] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 1833.611455] IP: [<ffffffffa0410c6a>] rtl92ce_update_hal_rate_tbl+0x29/0x4db [rtl8192ce] ... [ 1833.613326] Call Trace: [ 1833.613346] [<ffffffffa02ad9c6>] ? rtl92c_dm_watchdog+0xd0b/0xec9 [rtl8192c_common] [ 1833.613391] [<ffffffff8105b5cf>] ? process_one_work+0x161/0x269 [ 1833.613425] [<ffffffff8105c598>] ? worker_thread+0xc2/0x145 [ 1833.613458] [<ffffffff8105c4d6>] ? manage_workers.isra.25+0x15b/0x15b [ 1833.613496] [<ffffffff8105f6d9>] ? kthread+0x76/0x7e [ 1833.613527] [<ffffffff81356b74>] ? kernel_thread_helper+0x4/0x10 [ 1833.613563] [<ffffffff8105f663>] ? kthread_worker_fn+0x139/0x139 [ 1833.613598] [<ffffffff81356b70>] ? gs_change+0x13/0x13 Disassembly of rtl92ce_update_hal_rate_tbl() shows that the 'sta' parameter was null. None of the changes to the rtlwifi family between 3.2.54 and 3.2.57 seem to directly cause this, and reverting commit f78bccd7 ('rtlwifi: rtl8192ce: Fix too long disable of IRQs') doesn't fix it. rtl92c_dm_watchdog() calls rtl92ce_update_hal_rate_tbl() via rtl92c_dm_refresh_rate_adaptive_mask(), which does not appear in the call trace as it was inlined. That function has been completely removed upstream which may explain why this crash wasn't seen there. I'm not sure that it is sensible to completely remove rtl92c_dm_refresh_rate_adaptive_mask() without making other compensating changes elsewhere, so try to work around this for 3.2 by checking for a null pointer in rtl92c_dm_refresh_rate_adaptive_mask() and then skipping the call to rtl92ce_update_hal_rate_tbl(). References: https://bugs.debian.org/745137 References: https://bugs.debian.org/745462Reported-by:
Dmitry Semyonov <linulin@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit 34f972d6 upstream. A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit dd6b48ec upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by:
-
Bjørn Mork authored
commit 533b3994 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by:
Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by:
-
Johan Hovold authored
commit 5509076d upstream. During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by:
Ludovic Drolez <ldrolez@debian.org> Tested-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
David Cohen authored
commit 01bb59eb upstream. When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841 "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Julius Werner authored
commit 1f81b6d2 upstream. We have observed a rare cycle state desync bug after Set TR Dequeue Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that doesn't fetch new TRBs and thus an unresponsive USB device). It always triggers when a previous Set TR Dequeue Pointer command has set the pointer to the final Link TRB of a segment, and then another URB gets enqueued and cancelled again before it can be completed. Further investigation showed that the xHC had returned the Link TRB in the TRB Pointer field of the Transfer Event (CC == Stopped -- Length Invalid), but when xhci_find_new_dequeue_state() later accesses the Endpoint Context's TR Dequeue Pointer field it is set to the first TRB of the next segment. The driver expects those two values to be the same in this situation, and uses the cycle state of the latter together with the address of the former. This should be fine according to the XHCI specification, since the endpoint ring should be stopped when returning the Transfer Event and thus should not advance over the Link TRB before it gets restarted. However, real-world XHCI implementations apparently don't really care that much about these details, so the driver should follow a more defensive approach to try to work around HC spec violations. This patch removes the stopped_trb variable that had been used to store the TRB Pointer from the last Transfer Event of a stopped TRB. Instead, xhci_find_new_dequeue_state() now relies only on the Endpoint Context, requiring a small amount of additional processing to find the virtual address corresponding to the TR Dequeue Pointer. Some other parts of the function were slightly rearranged to better fit into this model. This patch should be backported to kernels as old as 2.6.31 that contain the commit ae636747 "USB: xhci: URB cancellation support." Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
-
Hans de Goede authored
commit c4bedb77 upstream. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Miao Xie authored
commit 1c70d8fb upstream. Currently, with inode cache enabled, we will reuse its inode id immediately after unlinking file, we may hit something like following: |->iput inode |->return inode id into inode cache |->create dir,fsync |->power off An easy way to reproduce this problem is: mkfs.btrfs -f /dev/sdb mount /dev/sdb /mnt -o inode_cache,commit=100 dd if=/dev/zero of=/mnt/data bs=1M count=10 oflag=sync inode_id=`ls -i /mnt/data | awk '{print $1}'` rm -f /mnt/data i=1 while [ 1 ] do mkdir /mnt/dir_$i test1=`stat /mnt/dir_$i | grep Inode: | awk '{print $4}'` if [ $test1 -eq $inode_id ] then dd if=/dev/zero of=/mnt/dir_$i/data bs=1M count=1 oflag=sync echo b > /proc/sysrq-trigger fi sleep 1 i=$(($i+1)) done mount /dev/sdb /mnt umount /dev/sdb btrfs check /dev/sdb We fix this problem by adding unlinked inode's id into pinned tree, and we can not reuse them until committing transaction. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
Chris Mason <clm@fb.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Stefan Behrens authored
commit ff76b056 upstream. Due to an off-by-one error, it is possible to reproduce a bug when the inode cache is used. The same inode number is assigned twice, the second time this leads to an EEXIST in btrfs_insert_empty_items(). The issue can happen when a file is removed right after a subvolume is created and then a new inode number is created before the inodes in free_inode_pinned are processed. unlink() calls btrfs_return_ino() which calls start_caching() in this case which adds [highest_ino + 1, BTRFS_LAST_FREE_OBJECTID] by searching for the highest inode (which already cannot find the unlinked one anymore in btrfs_find_free_objectid()). So if this unlinked inode's number is equal to the highest_ino + 1 (or >= this value instead of > this value which was the off-by-one error), we mustn't add the inode number to free_ino_pinned (caching_thread() does it right). In this case we need to try directly to add the number to the inode_cache which will fail in this case. When this inode number is allocated while it is still in free_ino_pinned, it is allocated and still added to the free inode cache when the pinned inodes are processed, thus one of the following inode number allocations will get an inode that is already in use and fail with EEXIST in btrfs_insert_empty_items(). One example which was created with the reproducer below: Create a snapshot, work in the newly created snapshot for the rest. In unlink(inode 34284) call btrfs_return_ino() which calls start_caching(). start_caching() calls add_free_space [34284, 18446744073709517077]. In btrfs_return_ino(), call start_caching pinned [34284, 1] which is wrong. mkdir() call btrfs_find_ino_for_alloc() which returns the number 34284. btrfs_unpin_free_ino calls add_free_space [34284, 1]. mkdir() call btrfs_find_ino_for_alloc() which returns the number 34284. EEXIST when the new inode is inserted. One possible reproducer is this one: #!/bin/sh # preparation TEST_DEV=/dev/sdc1 TEST_MNT=/mnt umount ${TEST_MNT} 2>/dev/null || true mkfs.btrfs -f ${TEST_DEV} mount ${TEST_DEV} ${TEST_MNT} -o \ rw,relatime,compress=lzo,space_cache,inode_cache btrfs subv create ${TEST_MNT}/s1 for i in `seq 34027`; do touch ${TEST_MNT}/s1/${i}; done btrfs subv snap ${TEST_MNT}/s1 ${TEST_MNT}/s2 FILENAME=`find ${TEST_MNT}/s1/ -inum 4085 | sed 's|^.*/\([^/]*\)$|\1|'` rm ${TEST_MNT}/s2/$FILENAME touch ${TEST_MNT}/s2/$FILENAME # the following steps can be repeated to reproduce the issue again and again [ -e ${TEST_MNT}/s3 ] && btrfs subv del ${TEST_MNT}/s3 btrfs subv snap ${TEST_MNT}/s2 ${TEST_MNT}/s3 rm ${TEST_MNT}/s3/$FILENAME touch ${TEST_MNT}/s3/$FILENAME ls -alFi ${TEST_MNT}/s?/$FILENAME touch ${TEST_MNT}/s3/_1 || logger FAILED ls -alFi ${TEST_MNT}/s?/_1 touch ${TEST_MNT}/s3/_2 || logger FAILED ls -alFi ${TEST_MNT}/s?/_2 touch ${TEST_MNT}/s3/__1 || logger FAILED ls -alFi ${TEST_MNT}/s?/__1 touch ${TEST_MNT}/s3/__2 || logger FAILED ls -alFi ${TEST_MNT}/s?/__2 # if the above is not enough, add the following loop: for i in `seq 3 9`; do touch ${TEST_MNT}/s3/__${i} || logger FAILED; done #for i in `seq 3 34027`; do touch ${TEST_MNT}/s3/__${i} || logger FAILED; done # one of the touch(1) calls in s3 fail due to EEXIST because the inode is # already in use that btrfs_find_ino_for_alloc() returns. Signed-off-by:
Stefan Behrens <sbehrens@giantdisaster.de> Reviewed-by:
Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Johan Hovold authored
commit 10164c2a upstream. Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by:
-
Xiangyu Lu authored
commit 80bb3ef1 upstream. In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Alex Wu <wuquanming@huawei.com> Signed-off-by:
Xiangyu Lu <luxiangyu@huawei.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Linus Torvalds authored
commit 1b17844b upstream. fixup_user_fault() is used by the futex code when the direct user access fails, and the futex code wants it to either map in the page in a usable form or return an error. It relied on handle_mm_fault() to map the page, and correctly checked the error return from that, but while that does map the page, it doesn't actually guarantee that the page will be mapped with sufficient permissions to be then accessed. So do the appropriate tests of the vma access rights by hand. [ Side note: arguably handle_mm_fault() could just do that itself, but we have traditionally done it in the caller, because some callers - notably get_user_pages() - have been able to access pages even when they are mapped with PROT_NONE. Maybe we should re-visit that design decision, but in the meantime this is the minimal patch. ] Found by Dave Jones running his trinity tool. Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Hans de Goede authored
commit 46a2986e upstream. We expect that all the Haswell series will need such quirks, sigh. The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad, with the same min/max issue. The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation. The X1 and T431s share a PnPID with the T540p, but the reported ranges are closer to those of the T440s. HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me, S1 Yoga and X1 are written by Benjamin Tissoires. Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the X240, X1 uses the same touchpad as the T440. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jani Nikula authored
commit 5017b285 upstream. dmi_match() considers a substring match to be a successful match. This is not always sufficient to distinguish between DMI data for different systems. Add support for exact string matching using strcmp() in addition to the substring matching using strstr(). The specific use case in the i915 driver is to allow us to use an exact match for D510MO, without also incorrectly matching D510MOV: { .ident = "Intel D510MO", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), DMI_EXACT_MATCH(DMI_BOARD_NAME, "D510MO"), }, } Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Cc: <annndddrr@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Cornel Panceac <cpanceac@gmail.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mizuma, Masayoshi authored
commit 7848a4bf upstream. soft lockup in freeing gigantic hugepage fixed in commit 55f67141 "mm: hugetlb: fix softlockup when a large number of hugepages are freed." can happen in return_unused_surplus_pages(), so let's fix it. Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Dan Williams authored
commit 8a4aeec8 upstream. The AHCI spec allows implementations to issue commands in tag order rather than FIFO order: 5.3.2.12 P:SelectCmd HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1) or HBA selects the command to issue that has had the PxCI bit set to '1' longer than any other command pending to be issued. The result is that commands posted sequentially (time-wise) may play out of sequence when issued by hardware. This behavior has likely been hidden by drives that arrange for commands to complete in issue order. However, it appears recent drives (two from different vendors that we have found so far) inflict out-of-order completions as a matter of course. So, we need to take care to maintain ordered submission, otherwise we risk triggering a drive to fall out of sequential-io automation and back to random-io processing, which incurs large latency and degrades throughput. This issue was found in simple benchmarks where QD=2 seq-write performance was 30-50% *greater* than QD=32 seq-write performance. Tagging for -stable and making the change globally since it has a low risk-to-reward ratio. Also, word is that recent versions of an unnamed OS also does it this way now. So, drives in the field are already experienced with this tag ordering scheme. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ed Ciechanowski <ed.ciechanowski@intel.com> Reviewed-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jeff Layton authored
commit 3758cf7e upstream. ...otherwise the logic in the timeout handling doesn't work correctly. Spotted-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [bwh: Backported to 3.2: max_cb_time() takes no parameters] Signed-off-by:
-
Michael Ulbricht authored
commit 895d240d upstream. By specifying NO_UNION_NORMAL the ACM driver does only use the first two USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA interfaces are left to the USB serial driver. Signed-off-by:
Michael Ulbricht <michael.ulbricht@systec-electronic.com> Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Aaron Sanders authored
commit b16c02fb upstream. Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays: LD960: 03f0:0B39 LCM220: 03f0:3139 LCM960: 03f0:3239 [ Johan: fix indentation and sort PIDs numerically ] Signed-off-by:
Aaron Sanders <aaron.sanders@hp.com> Signed-off-by:
-
Tristan Bruns authored
commit 72b30079 upstream. Signed-off-by:
Tristan Bruns <tristan@tristanbruns.de> Signed-off-by:
-
Daniele Palmas authored
commit d6de486b upstream. option driver, added VID/PID for Telit UE910v2 modem Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 2e01280d upstream. This reverts commit 1ebca9da. This device was erroneously added to the sierra driver even though it's not a Sierra device and was already handled by the option driver. Cc: Richard Farina <sidhayn@gmail.com> Signed-off-by:
-
Michele Baldessari authored
commit efe26e16 upstream. Custom VID/PIDs for Brainboxes cards as reported in https://bugzilla.redhat.com/show_bug.cgi?id=1071914Signed-off-by:
Michele Baldessari <michele@acksyn.org> Signed-off-by:
-
Larry Finger authored
commit f764cd68 upstream. Zero-initializing ether_type masked that the ether type would never be obtained for 8021x packets and the comparison against eapol_type would always fail. Reported-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Chris Mason authored
commit c98235cb upstream. The mlx4 driver is triggering schedules while atomic inside mlx4_en_netpoll: spin_lock_irqsave(&cq->lock, flags); napi_synchronize(&cq->napi); ^^^^^ msleep here mlx4_en_process_rx_cq(dev, cq, 0); spin_unlock_irqrestore(&cq->lock, flags); This was part of a patch by Alexander Guller from Mellanox in 2011, but it still isn't upstream. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jeff Layton authored
commit f1c6bb2c upstream. A fl->fl_break_time of 0 has a special meaning to the lease break code that basically means "never break the lease". knfsd uses this to ensure that leases don't disappear out from under it. Unfortunately, the code in __break_lease can end up passing this value to wait_event_interruptible as a timeout, which prevents it from going to sleep at all. This makes __break_lease to spin in a tight loop and causes soft lockups. Fix this by ensuring that we pass a minimum value of 1 as a timeout instead. Cc: J. Bruce Fields <bfields@fieldses.org> Reported-by:
Terry Barnaby <terry1@beam.ltd.uk> Signed-off-by:
-
Helge Deller authored
commit ab3e55b1 upstream. This bug was detected with the libio-epoll-perl debian package where the test case IO-Ppoll-compat.t failed. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Theodore Ts'o authored
commit 6e6358fc upstream. We haven't taken i_mutex yet, so we need to use i_size_read(). Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Matthew Wilcox authored
commit 9503c67c upstream. ext4_end_bio() currently throws away the error that it receives. Chances are this is part of a spate of errors, one of which will end up getting the error returned to userspace somehow, but we shouldn't take that risk. Also print out the errno to aid in debug. Signed-off-by:
Jan Kara <jack@suse.cz> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Kazuya Mio authored
commit 4adb6ab3 upstream. When we try to get 2^32-1 block of the file which has the extent (ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON in ext4_ext_put_gap_in_cache(). To avoid the problem, ext4_map_blocks() needs to check the file logical block number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot handle 2^32-1 because the maximum file logical block number is 2^32-2. Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid. So ext4_map_blocks() should also return the same errno. Signed-off-by:
Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by:
-
- 30 Apr, 2014 1 commit
-
-
Ben Hutchings authored
-
