Rename gfs2_freeze to gfs2_freeze_super and gfs2_unfreeze to
gfs2_thaw_super to match the names of the corresponding super
operations.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

The transaction glock was repurposed to serve as the new freeze glock
years ago.  Don't refer to it as the transaction glock anymore.

Also, to be more precise, call it the "freeze glock" instead of the
"freeze lock".  Ditto for the journal glock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

The iomap-based read operations done by gfs2 for its system files, such
as rindex, may sometimes be interrupted and return -EINTR.   This
confuses some users of gfs2_internal_read().  Fix that by retrying
interrupted reads.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Some fields such as gt_logd_secs of the struct gfs2_tune are accessed
without holding the lock gt_spin in gfs2_show_options():

  val = sdp->sd_tune.gt_logd_secs;
  if (val != 30)
    seq_printf(s, ",commit=%d", val);

And thus can cause data races when gfs2_show_options() and other functions
such as gfs2_reconfigure() are concurrently executed:

  spin_lock(&gt->gt_spin);
  gt->gt_logd_secs = newargs->ar_commit;

To fix these possible data races, the lock sdp->sd_tune.gt_spin is
acquired before accessing the fields of gfs2_tune and released after these
accesses.

Further changes by Andreas:

- Don't hold the spin lock over the seq_printf operations.
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

In gfs2_file_buffered_write(), we currently jump from the second call of
function should_fault_in_pages() to above the first call, so
should_fault_in_pages() is getting called twice in a row, causing it to
accidentally fall back to single-page writes rather than trying the more
efficient multi-page writes first.

Fix that by moving the retry label to the correct place, behind the
first call to should_fault_in_pages().

Fixes: e1fa9ea8 ("gfs2: Stop using glock holder auto-demotion for now")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Since commit a2ad63da ("VFS: add FMODE_CAN_ODIRECT file flag"), file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.

Remove .direct_IO from gfs2_aops and set FMODE_CAN_ODIRECT in
gfs2_open_common for regular files that do not use data journalling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

This patch changes function evict_unlinked_inode so it does not call
gfs2_inode_remember_delete until it gets a good return code from
gfs2_dinode_dealloc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Function gfs2_free_di was changing the rgrp lvb count of unlinked
dinodes after the lock was released. This patch moves it inside the
lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

This patch fixes a case in which function gfs2_quota_hold encounters an
assert error and exits. The lack of gfs2_qa_put causes further problems
when the inode is evicted and the get/put count is non-zero.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Before this patch, function gfs2_dinode_dealloc would abort if it got a
bad return code from gfs2_rindex_update(). The problem is that it left the
dinode in the unlinked (not free) state, which meant subsequent fsck
would clean it up and flag an error. That meant some of our QE tests
would fail.

The sole purpose of gfs2_rindex_update(), in this code path, is to read in
any newer rgrps added by gfs2_grow. But since this is a delete operation
it won't actually use any of those new rgrps. It can really only twiddle
the bits from "Unlinked" to "Free" in an existing rgrp. Therefore the
error should not prevent the transition from unlinked to free.

This patch makes gfs2_dinode_dealloc ignore the bad return code and
proceed with freeing the dinode so the QE tests will not be tripped up.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

This patch introduces a new out_free label and consolidates the three
places function gdlm_put_lock freed the glock.  No change in
functionality.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull gfs2 fix from Andreas Gruenbacher:

 - Don't get stuck writing page onto itself under direct I/O

* tag 'gfs2-v6.4-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Don't get stuck writing page onto itself under direct I/O

Merge tag 'platform-drivers-x86-v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - various Microsoft Surface support fixes

 - one fix for the INT3472 driver

* tag 'platform-drivers-x86-v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: int3472: Avoid crash in unregistering regulator gpio
  platform/surface: aggregator_tabletsw: Add support for book mode in POS subsystem
  platform/surface: aggregator_tabletsw: Add support for book mode in KIP subsystem
  platform/surface: aggregator: Allow completion work-items to be executed in parallel
  platform/surface: aggregator: Make to_ssam_device_driver() respect constness

Pull HID fix from Jiri Kosina:

 - Final, confirmed fix for regression causing some devices connected
   via Logitech HID++ Unifying receiver take too long to initialize
   (Benjamin Tissoires)

* tag 'for-linus-2023060501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: hidpp: terminate retry loop on success

It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.

And remove the ugly "goto exit" that can be replaced by a simpler "break"

Fixes: 586e8fed ("HID: logitech-hidpp: Retry commands when device is busy")
Suggested-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull asymmetric keys fix from Roberto Sassu:
 "Here is a small fix to make an unconditional copy of the buffer passed
  to crypto operations, to take into account the case of the stack not
  in the linear mapping area.

  It has been tested and verified to fix the bug"
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David Howells <dhowells@redhat.com>

* tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux:
  KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()

Pull irq fix from Borislav Petkov:

 - Fix open firmware quirks validation so that they don't get applied
   wrongly

* tag 'irq_urgent_for_v6.4_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Correctly validate OF quirk descriptors

Pull media fixes from Mauro Carvalho Chehab:
 "Some driver fixes:
   - a regression fix for the verisilicon driver
   - uvcvideo: don't expose unsupported video formats to userspace
   - camss-video: don't zero subdev format after init
   - mediatek: some fixes for 4K decoder formats
   - fix a Sphinx build warning (missing doc for client_caps)
   - some fixes for imx and atomisp staging drivers

  And two CEC core fixes:
   - don't set last_initiator if TX in progress
   - disable adapter in cec_devnode_unregister"

* tag 'media/v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: uvcvideo: Don't expose unsupported formats to userspace
  media: v4l2-subdev: Fix missing kerneldoc for client_caps
  media: staging: media: imx: initialize hs_settle to avoid warning
  media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
  media: staging: media: atomisp: init high & low vars
  media: cec: core: don't set last_initiator if tx in progress
  media: cec: core: disable adapter in cec_devnode_unregister
  media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats
  media: camss: camss-video: Don't zero subdev format again after initialization
  media: verisilicon: Additional fix for the crash when opening the driver

Pull char/misc driver fixes from Greg KH:
 "Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
  resolve a number of reported issues. Included in here are:

   - iio driver fixes

   - fpga driver fixes

   - test_firmware bugfixes

   - fastrpc driver tiny bugfixes

   - MAINTAINERS file updates for some subsystems

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits)
  test_firmware: fix the memory leak of the allocated firmware buffer
  test_firmware: fix a memory leak with reqs buffer
  test_firmware: prevent race conditions by a correct implementation of locking
  firmware_loader: Fix a NULL vs IS_ERR() check
  MAINTAINERS: Vaibhav Gupta is the new ipack maintainer
  dt-bindings: fpga: replace Ivan Bornyakov maintainership
  MAINTAINERS: update Microchip MPF FPGA reviewers
  misc: fastrpc: reject new invocations during device removal
  misc: fastrpc: return -EPIPE to invocations on device removal
  misc: fastrpc: Reassign memory ownership only for remote heap
  misc: fastrpc: Pass proper scm arguments for secure map request
  iio: imu: inv_icm42600: fix timestamp reset
  iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
  iio: dac: mcp4725: Fix i2c_master_send() return value handling
  iio: accel: kx022a fix irq getting
  iio: bu27034: Ensure reset is written
  iio: dac: build ad5758 driver when AD5758 is selected
  iio: addac: ad74413: fix resistance input processing
  iio: light: vcnl4035: fixed chip ID check
  ...

Pull driver core fixes from Greg KH:
 "Here are two small driver core cacheinfo fixes for 6.4-rc5 that
  resolve a number of reported issues with that file. These changes have
  been in linux-next this past week with no reported problems"

* tag 'driver-core-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: base: cacheinfo: Update cpu_map_populated during CPU Hotplug
  drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 6.4-rc5 that have all
  been in linux-next this past week with no reported problems. Included
  in here are:

   - 8250_tegra driver bugfix

   - fsl uart driver bugfixes

   - Kconfig fix for dependancy issue

   - dt-bindings fix for the 8250_omap driver"

* tag 'tty-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  dt-bindings: serial: 8250_omap: add rs485-rts-active-high
  serial: cpm_uart: Fix a COMPILE_TEST dependency
  soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST
  tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK
  serial: 8250_tegra: Fix an error handling path in tegra_uart_probe()

Pull USB fixes from Greg KH:
 "Here are some USB driver and core fixes for 6.4-rc5. Most of these are
  tiny driver fixes, including:

   - udc driver bugfix

   - f_fs gadget driver bugfix

   - cdns3 driver bugfix

   - typec bugfixes

  But the "big" thing in here is a fix yet-again for how the USB buffers
  are handled from userspace when dealing with DMA issues. The changes
  were discussed a lot, and tested a lot, on the list, and acked by the
  relevant mm maintainers and have been in linux-next all this past week
  with no reported problems"

* tag 'usb-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tps6598x: Fix broken polling mode after system suspend/resume
  mm: page_table_check: Ensure user pages are not slab pages
  mm: page_table_check: Make it dependent on EXCLUSIVE_SYSTEM_RAM
  usb: usbfs: Use consistent mmap functions
  usb: usbfs: Enforce page requirements for mmap
  dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type
  usb: gadget: udc: fix NULL dereference in remove()
  usb: gadget: f_fs: Add unbind event before functionfs_unbind
  usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Address some fallout of the locking rework, this time affecting the
     way the vgic is configured

   - Fix an issue where the page table walker frees a subtree and then
     proceeds with walking what it has just freed...

   - Check that a given PA donated to the guest is actually memory (only
     affecting pKVM)

   - Correctly handle MTE CMOs by Set/Way

   - Fix the reported address of a watchpoint forwarded to userspace

   - Fix the freeing of the root of stage-2 page tables

   - Stop creating spurious PMU events to perform detection of the
     default PMU and use the existing PMU list instead

  x86:

   - Fix a memslot lookup bug in the NX recovery thread that could
     theoretically let userspace bypass the NX hugepage mitigation

   - Fix a s/BLOCKING/PENDING bug in SVM's vNMI support

   - Account exit stats for fastpath VM-Exits that never leave the super
     tight run-loop

   - Fix an out-of-bounds bug in the optimized APIC map code, and add a
     regression test for the race"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Add test for race in kvm_recalculate_apic_map()
  KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
  KVM: x86: Account fastpath-only VM-Exits in vCPU stats
  KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
  KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
  KVM: arm64: Document default vPMU behavior on heterogeneous systems
  KVM: arm64: Iterate arm_pmus list to probe for default PMU
  KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed()
  KVM: arm64: Populate fault info for watchpoint
  KVM: arm64: Reload PTE after invoking walker callback on preorder traversal
  KVM: arm64: Handle trap of tagged Set/Way CMOs
  arm64: Add missing Set/Way CMO encodings
  KVM: arm64: Prevent unconditional donation of unmapped regions from the host
  KVM: arm64: vgic: Fix a comment
  KVM: arm64: vgic: Fix locking comment
  KVM: arm64: vgic: Wrap vgic_its_create() with config_lock
  KVM: arm64: vgic: Fix a circular locking issue

Pull powerpc fixes from Michael Ellerman:

 - Fix link errors in new aes-gcm-p10 code when built-in with other
   drivers

 - Limit number of TCEs passed to H_STUFF_TCE hcall as per spec

 - Use KSYM_NAME_LEN in xmon array size to avoid possible OOB write

Thanks to Gaurav Batra and Maninder Singh Vishal Chourasia.

* tag 'powerpc-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xmon: Use KSYM_NAME_LEN in array size
  powerpc/iommu: Limit number of TCEs to 512 for H_STUFF_TCE hcall
  powerpc/crypto: Fix aes-gcm-p10 link errors

KVM x86 fixes for 6.4

 - Fix a memslot lookup bug in the NX recovery thread that could
   theoretically let userspace bypass the NX hugepage mitigation

 - Fix a s/BLOCKING/PENDING bug in SVM's vNMI support

 - Account exit stats for fastpath VM-Exits that never leave the super
   tight run-loop

 - Fix an out-of-bounds bug in the optimized APIC map code, and add a
   regression test for the race.

Merge tag 'kvmarm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.4, take #3

- Fix the reported address of a watchpoint forwarded to userspace

- Fix the freeing of the root of stage-2 page tables

- Stop creating spurious PMU events to perform detection of the
  default PMU and use the existing PMU list instead.

Merge tag 'kvmarm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.4, take #2

- Address some fallout of the locking rework, this time affecting
  the way the vgic is configured

- Fix an issue where the page table walker frees a subtree and
  then proceeds with walking what it has just freed...

- Check that a given PA donated to the gues is actually memory
  (only affecting pKVM)

- Correctly handle MTE CMOs by Set/Way

Pull SCSI fixes from James Bottomley:
 "Five fixes, all in drivers.

  The most extensive is the target change to fix the hang in the login
  code, which involves changing timers from per login to per connection"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: stex: Fix gcc 13 warnings
  scsi: qla2xxx: Fix NULL pointer dereference in target mode
  scsi: target: iscsi: Prevent login threads from racing between each other
  scsi: target: iscsi: Remove unused transport_timer
  scsi: target: iscsi: Fix hang in the iSCSI login code

Pull LED fix from Johan Hovold:
 "Here's a fix for a regression in 6.4-rc1 which broke the backlight on
  machines such as the Lenovo ThinkPad X13s"
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/lkml/20230602091928.GR449117@google.com/

* tag 'leds-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/linux:
  leds: qcom-lpg: Fix PWM period limits

The introduction of high resolution PWM support changed the order of the
operations in the calculation of min and max period. The result in both
divisions is in most cases a truncation to 0, which limits the period to
the range of [0, 0].

Both numerators (and denominators) are within 64 bits, so the whole
expression can be put directly into the div64_u64, instead of doing it
partially.

Fixes: b00d2ed3 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Lee Jones <lee@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20230515162604.649203-1-quic_bjorande@quicinc.comSigned-off-by: Johan Hovold <johan@kernel.org>

Pull probes fixes from Masami Hiramatsu:

 - Return NULL if the trace_probe list on trace_probe_event is empty

 - selftests/ftrace: Choose testing symbol name for filtering feature
   from sample data instead of fixed symbol

* tag 'probes-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  selftests/ftrace: Choose target function for filter test from samples
  tracing/probe: trace_probe_primary_from_call(): checked list_first_entry

Since the event-filter-function.tc expects the 'exit_mmap()' directly
calls 'kmem_cache_free()', this is vulnerable to code modifications.

Choose the target function for the filter test from the sample
event data so that it can keep test running correctly even if the caller
function name will be changed.

Link: https://lore.kernel.org/linux-trace-kernel/167919441260.1922645.18355804179347364057.stgit@mhiramat.roam.corp.google.com/

Link: https://lore.kernel.org/all/CA+G9fYtF-XEKi9YNGgR=Kf==7iRb2FrmEC7qtwAeQbfyah-UhA@mail.gmail.com/Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 7f09d639 ("tracing/selftests: Add test for event filtering on function name")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Keep switching between LAPIC_MODE_X2APIC and LAPIC_MODE_DISABLED during
APIC map construction to hunt for TOCTOU bugs in KVM.  KVM's optimized map
recalc makes multiple passes over the list of vCPUs, and the calculations
ignore vCPU's whose APIC is hardware-disabled, i.e. there's a window where
toggling LAPIC_MODE_DISABLED is quite interesting.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230602233250.1014316-4-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Bail from kvm_recalculate_phys_map() and disable the optimized map if the
target vCPU's x2APIC ID is out-of-bounds, i.e. if the vCPU was added
and/or enabled its local APIC after the map was allocated.  This fixes an
out-of-bounds access bug in the !x2apic_format path where KVM would write
beyond the end of phys_map.

Check the x2APIC ID regardless of whether or not x2APIC is enabled,
as KVM's hardcodes x2APIC ID to be the vCPU ID, i.e. it can't change, and
the map allocation in kvm_recalculate_apic_map() doesn't check for x2APIC
being enabled, i.e. the check won't get false postivies.

Note, this also affects the x2apic_format path, which previously just
ignored the "x2apic_id > new->max_apic_id" case.  That too is arguably a
bug fix, as ignoring the vCPU meant that KVM would not send interrupts to
the vCPU until the next map recalculation.  In practice, that "bug" is
likely benign as a newly present vCPU/APIC would immediately trigger a
recalc.  But, there's no functional downside to disabling the map, and
a future patch will gracefully handle the -E2BIG case by retrying instead
of simply disabling the optimized map.

Opportunistically add a sanity check on the xAPIC ID size, along with a
comment explaining why the xAPIC ID is guaranteed to be "good".
Reported-by: Michal Luczaj <mhal@rbox.co>
Fixes: 5b84b029 ("KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602233250.1014316-2-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Increment vcpu->stat.exits when handling a fastpath VM-Exit without
going through any part of the "slow" path.  Not bumping the exits stat
can result in wildly misleading exit counts, e.g. if the primary reason
the guest is exiting is to program the TSC deadline timer.

Fixes: 404d5d7b ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602011920.787844-2-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

While testing Hyper-V enabled Windows Server 2019 guests on Zen4 hardware
I noticed that with vCPU count large enough (> 16) they sometimes froze at
boot.
With vCPU count of 64 they never booted successfully - suggesting some kind
of a race condition.

Since adding "vnmi=0" module parameter made these guests boot successfully
it was clear that the problem is most likely (v)NMI-related.

Running kvm-unit-tests quickly showed failing NMI-related tests cases, like
"multiple nmi" and "pending nmi" from apic-split, x2apic and xapic tests
and the NMI parts of eventinj test.

The issue was that once one NMI was being serviced no other NMI was allowed
to be set pending (NMI limit = 0), which was traced to
svm_is_vnmi_pending() wrongly testing for the "NMI blocked" flag rather
than for the "NMI pending" flag.

Fix this by testing for the right flag in svm_is_vnmi_pending().
Once this is done, the NMI-related kvm-unit-tests pass successfully and
the Windows guest no longer freezes at boot.

Fixes: fa4c027a ("KVM: x86: Add support for SVM's Virtual NMI")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/be4ca192eb0c1e69a210db3009ca984e6a54ae69.1684495380.git.maciej.szmigiero@oracle.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Factor in the address space (non-SMM vs. SMM) of the target shadow page
when recovering potential NX huge pages, otherwise KVM will retrieve the
wrong memslot when zapping shadow pages that were created for SMM.  The
bug most visibly manifests as a WARN on the memslot being non-NULL, but
the worst case scenario is that KVM could unaccount the shadow page
without ensuring KVM won't install a huge page, i.e. if the non-SMM slot
is being dirty logged, but the SMM slot is not.

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 3911 at arch/x86/kvm/mmu/mmu.c:7015
 kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm]
 CPU: 1 PID: 3911 Comm: kvm-nx-lpage-re
 RIP: 0010:kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm]
 RSP: 0018:ffff99b284f0be68 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff99b284edd000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffff9271397024e0 R08: 0000000000000000 R09: ffff927139702450
 R10: 0000000000000000 R11: 0000000000000001 R12: ffff99b284f0be98
 R13: 0000000000000000 R14: ffff9270991fcd80 R15: 0000000000000003
 FS:  0000000000000000(0000) GS:ffff927f9f640000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f0aacad3ae0 CR3: 000000088fc2c005 CR4: 00000000003726e0
 Call Trace:
  <TASK>
__pfx_kvm_nx_huge_page_recovery_worker+0x10/0x10 [kvm]
  kvm_vm_worker_thread+0x106/0x1c0 [kvm]
  kthread+0xd9/0x100
  ret_from_fork+0x2c/0x50
  </TASK>
 ---[ end trace 0000000000000000 ]---

This bug was exposed by commit edbdb43f ("KVM: x86: Preserve TDP MMU
roots until they are explicitly invalidated"), which allowed KVM to retain
SMM TDP MMU roots effectively indefinitely.  Before commit edbdb43f,
KVM would zap all SMM TDP MMU roots and thus all SMM TDP MMU shadow pages
once all vCPUs exited SMM, which made the window where this bug (recovering
an SMM NX huge page) could be encountered quite tiny.  To hit the bug, the
NX recovery thread would have to run while at least one vCPU was in SMM.
Most VMs typically only use SMM during boot, and so the problematic shadow
pages were gone by the time the NX recovery thread ran.

Now that KVM preserves TDP MMU roots until they are explicitly invalidated
(e.g. by a memslot deletion), the window to trigger the bug is effectively
never closed because most VMMs don't delete memslots after boot (except
for a handful of special scenarios).

Fixes: eb298605 ("KVM: x86/mmu: Do not recover dirty-tracked NX Huge Pages")
Reported-by: Fabio Coatti <fabio.coatti@gmail.com>
Closes: https://lore.kernel.org/all/CADpTngX9LESCdHVu_2mQkNGena_Ng2CphWNwsRGSMxzDsTjU2A@mail.gmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602010137.784664-1-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

With commit 858e8b79 ("tpm, tpm_tis: Avoid cache incoherency in test
for interrupts") bit accessor functions are used to access flags in
tpm_tis_data->flags.

However these functions expect bit numbers, while the flags are defined
as bit masks in enum tpm_tis_flag.

Fix this inconsistency by using numbers instead of masks also for the
flags in the enum.
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 858e8b79 ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: stable@vger.kernel.org
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>