- 28 Oct, 2022 15 commits
-
-
Vidya Sagar authored
Set ENABLE_L2_EXIT_RATE_CHANGE register bit to request UPHY PLL rate change to Gen1 during initialization. This helps in the below surprise link down cases, - Surprise link down happens at Gen3/Gen4 link speed. - Surprise link down happens and external REFCLK is cut off, which causes UPHY PLL rate to deviate to an invalid rate. Signed-off-by:
Vidya Sagar <vidyas@nvidia.com> Link: https://lore.kernel.org/r/20221013183854.21087-9-vidyas@nvidia.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Johan Hovold authored
The power-down delay was included in the first version of the QMP driver as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). Let's keep the delay for now, but drop the redundant delay period configuration while increasing the unnecessarily low timer slack somewhat. Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221012081241.18273-15-johan+linaro@kernel.orgSigned-off-by:
-
Johan Hovold authored
The SC8280XP PHY does not need a delay before starting the PHY (which is what the has_pwrdn_delay config option really controls) so drop the unnecessary delay. Signed-off-by:
-
Johan Hovold authored
The power-down delay was included in the first version of the QMP driver as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). Let's keep the delay for now, but drop the redundant delay period configuration while increasing the unnecessarily low timer slack somewhat. Reviewed-by:
-
Johan Hovold authored
The SC8280XP combo PHY does not need a delay before starting the USB PHY (which is what the has_pwrdn_delay config option really controls) so drop the unnecessary delay. Signed-off-by:
-
Johan Hovold authored
The power-down delay was included in the first version of the QMP driver for MSM8996 as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). Let's keep the delay for now, but drop the redundant configuration options while increasing the unnecessarily low timer slack somewhat. Reviewed-by:
-
Johan Hovold authored
The power-down delay was included in the first version of the QMP driver as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). But as the vendor kernel do have a 1 ms delay *after* starting the PHY and before starting to poll the status it is possible that later contributors have simply not noticed that the mainline power-down delay is not equivalent. As the current delay before even starting the PHY is pretty much pointless and likely a mistake, move the delay after starting the PHY which avoids a few iterations of polling and speeds up startup by 1 ms (the poll loop otherwise takes about 1.8 ms). Note that MSM8998 has never used a power-down delay so add a flag to skip the delay in case starting the PHY is faster on MSM8998. This can be removed after someone takes a measurement. Signed-off-by:
-
Johan Hovold authored
The power-down delay was included in the first version of the QMP driver as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). Let's keep the delay for now, but drop the redundant delay period configuration while increasing the unnecessarily low timer slack somewhat. Reviewed-by:
-
Johan Hovold authored
The QMP USB PHY driver does not use the "in-layout" configuration macro to configure registers that are typically accessed using "regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused feature. Signed-off-by:
-
Johan Hovold authored
The QMP UFS PHY driver does not use the "in-layout" configuration macro to configure registers that are typically accessed using "regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused feature. Reviewed-by:
-
Johan Hovold authored
The MSM8996 QMP PCIe PHY driver no longer uses the "in-layout" configuration macro to configure registers that are typically accessed using "regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused feature. Reviewed-by:
-
Johan Hovold authored
The PCS initialisation table for IPQ8074 includes updates of the reset and start-control registers which is already handled explicitly by the driver during power on. Drop the redundant register write from the IPQ8074 configuration table and along with it the now unused "in-layout" configuration macro and code. Reviewed-by:
-
Johan Hovold authored
The QMP combo PHY driver does not use the "in-layout" configuration macro to configure registers that are typically accessed using "regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused feature. Reviewed-by:
-
Johan Hovold authored
Drop some unnecessary or incorrect comments. Reviewed-by:
-
Johan Hovold authored
Regulator core already logs an error message in case requesting a regulator fails so drop the mostly redundant error message from probe. Reviewed-by:
-
- 17 Oct, 2022 24 commits
-
-
Johan Hovold authored
Since commit 0d58280c ("phy: Update PHY power control sequence") the PHY is powered on before configuring the registers and only the MSM8996 PCIe PHY, which includes the POWER_DOWN_CONTROL register in its PCS initialisation table, may possibly require a second update afterwards. To make things worse, the POWER_DOWN_CONTROL register lies at a different offset on more recent SoCs so that the second update, which still used a hard-coded offset, would write to an unrelated register (e.g. a revision-id register on SC8280XP). As the MSM8996 PCIe PHY is now handled by a separate driver, simply drop the bogus register update. Fixes: e4d8b05a ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") added support Reviewed-by:
-
Johan Hovold authored
Keep the clock lists together and sorted by symbol name. Reviewed-by:
-
Johan Hovold authored
Always define the POWER_DOWN_CONTROL register instead of falling back to the v2 (and v3) offset during power on and power off. Reviewed-by:
-
Johan Hovold authored
Always define the POWER_DOWN_CONTROL register instead of falling back to the v2 (and v4) offset during power on and power off. Reviewed-by:
-
Johan Hovold authored
Always define the POWER_DOWN_CONTROL register instead of falling back to the v2 (and v3) offset during power on and power off. Reviewed-by:
-
Johan Hovold authored
This driver uses v2 registers only so drop the unnecessary POWER_DOWN_CONTROL override. Note that this register is already hard-coded when powering on the PHY. Reviewed-by:
-
Johan Hovold authored
Move the power-down-control register update that powers on the PHY to the power-on handler so that it matches the power-off handler. Note that the power-on handler is currently always called directly after init. Reviewed-by:
-
Johan Hovold authored
Always define the POWER_DOWN_CONTROL register instead of falling back to the v2 offset during power on and power off. Reviewed-by:
-
Johan Hovold authored
Drop the common-block register defines that are unused since the QMP driver split. Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
Johan Hovold authored
Drop the unused UFS reset code which isn't used since the QMP driver split. Reviewed-by:
-
Johan Hovold authored
All QMP drivers but the MSM8996 and combo ones handle exactly one PHY and the corresponding memory resources are not per-lane, but per PHY. Update the obsolete comments. Reviewed-by:
-
Dmitry Baryshkov authored
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being used in the EP mode. Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Jingoo Han <jingoohan1@gmail.com> Reviewed-by:
Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20220927092207.161501-6-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being used in the RC mode. Reviewed-by:
-
Dmitry Baryshkov authored
Add support for using PCIe1 (gen4x2) in EP mode on SM8450. The tables to program are mostly common with the RC mode tables, so only register difference are split into separate RC and EP tables. Signed-off-by:
-
Dmitry Baryshkov authored
The PCIe QMP PHY requires different programming sequences when being used for the RC (Root Complex) or for the EP (End Point) modes. Allow selecting the submode and thus selecting a set of PHY programming tables. Since the RC and EP modes share common some common init sequence, the common sequence is kept in the main table and the sequence differences are pushed to the extra tables. Reviewed-by:
-
Dmitry Baryshkov authored
SM8250 configuration tables are split into two parts: the common one and the PHY-specific tables. Make this split more formal. Rather than having a blind renamed copy of all QMP table fields, add separate struct qmp_phy_cfg_tables and add two instances of this structure to the struct qmp_phy_cfg. Later on this will be used to support different PHY modes (RC vs EP). Reviewed-by:
-
Pali Rohár authored
Turris MOX board with older ARM Trusted Firmware version v1.5 is not able to detect any USB 3.0 device connected to USB-A port on Mox-A module after commit 0a6fc70d ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support"). On the other hand USB 2.0 devices connected to the same USB-A port are working fine. It looks as if the older firmware configures COMPHY registers for USB 3.0 somehow incompatibly for kernel driver. Experiments show that resetting COMPHY registers via setting SFT_RST auto-clearing bit in COMPHY_SFT_RESET register fixes this issue. Reset the COMPHY in mvebu_a3700_comphy_usb3_power_on() function as a first step after selecting COMPHY lane and USB 3.0 function. With this change Turris MOX board can successfully detect USB 3.0 devices again. Before the above mentioned commit this reset was implemented in PHY reset method, so this is the reason why there was no issue with older firmware version then. Fixes: 0a6fc70d ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support") Reported-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Pali Rohár <pali@kernel.org> Tested-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20220920121154.30115-1-pali@kernel.orgSigned-off-by:
-
Richard Zhu authored
Add i.MX8MP PCIe PHY support. Signed-off-by:
Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Marek Vasut <marex@denx.de> Tested-by:
Richard Leitner <richard.leitner@skidata.com> Tested-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/1665625622-20551-5-git-send-email-hongxing.zhu@nxp.comSigned-off-by:
-
Richard Zhu authored
To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY driver. - Use gpr compatible string to avoid the codes duplications when add another platform PCIe PHY support. - Re-arrange the codes to let it more flexible and easy to expand. No functional change. Re-arrange the TX tuning, since internal registers can be wrote through APB interface before assertion of CMN_RST. Signed-off-by:
-
Richard Zhu authored
No function changes, refine PHY register definitions. - Keep align with other CMN PHY registers, refine the definitions of PHY_CMN_REG75. - Remove two BIT definitions that are not used at all. Signed-off-by:
-
Richard Zhu authored
Add i.MX8MP PCIe PHY binding. On i.MX8MM, the initialized default value of PERST bit(BIT3) of SRC_PCIEPHY_RCR is 1b'1. But i.MX8MP has one inversed default value 1b'0 of PERST bit. And the PERST bit should be kept 1b'1 after power and clocks are stable. So add one more PERST explicitly for i.MX8MP PCIe PHY. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1665625622-20551-2-git-send-email-hongxing.zhu@nxp.comSigned-off-by:
-
Matt Ranostay authored
Add support for j784s4-wiz-10g device which has two core reference clocks (e.g core_ref_clk, core_ref1_clk) which requires an additional mux selection option. Acked-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20221015201123.195477-3-mranostay@ti.comSigned-off-by:
-
Matt Ranostay authored
Add ti,j784s4-wiz-10g compatible string to binding documentation. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221015201123.195477-2-mranostay@ti.comSigned-off-by:
-
Dan Carpenter authored
If "index > usbphyc->nphys" is true then this returns success but it should return -EINVAL. Fixes: 94c358da ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/Y0kq8j6S+5nDdMpr@kiliSigned-off-by:
-
- 16 Oct, 2022 1 commit
-
-
Linus Torvalds authored
-
