- 30 May, 2014 1 commit
-
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Compile-Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 May, 2014 4 commits
-
-
David S. Miller authored
Daniel Mack says: ==================== mdio: Parse DT nodes for auto-probed PHYs Here's v2. v1 -> v2: * Switch to of_property_read_u32() in patch #1 * Check for mdio->dev_of_node in patch #2 * Added Florian's Reviewed-by: tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Mack authored
of_get_property() can be called with NULL as 2nd argument if the caller is not interested in the length of a property. Use that here so we can get rid of a variable. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Mack authored
Add a function to walk the list of subnodes of a mdio bus and look for a node that matches the phy's address with its 'reg' property. If found, set the of_node pointer for the phy. This allows auto-probed pyh devices to be augmented by information passed in via DT. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Mack authored
Factor out some logic into of_mdio_parse_addr() so it can be reused later. While at it, use of_property_read_u32() rather than open-coding the same logic again. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 May, 2014 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to e1000, e1000e, ixgbe and i40evf. Emil provides a fix for ixgbe so that non-fiber devices with MNG FW enabled are able to link at 100Mbps. Jacob provides several changes for ixgbe, most of which are PTP related. Renames ixgbe_ptp_enable() to ixgbe_ptp_feature_enable() to better reflect the functions purpose. Extracts the hardware setup logic for the PTP hardware bits from the ixgbe_ptp_set_ts_config() to enable future work for the ixgbe_ptp_reset(). Maintain the hwstamp configuration through a reset and extracts the creation of the PTP clock device from ptp_init() in order to properly handle a suspend/resume cycle and only calls it if we don't already have a ptp_clock pointer. David provides a patch to expend the e1000e driver to turn on unicast PROMISC when there is failure to write to a shared receive address register. The fix update_phy_task() for 82579 is expanded to include newer PHYs as well so that the dev_spec->eee_lp_ability has the correct value when going into SX states. Todd provides a e1000e fix an errata for 82574/82583 where it is possible bad bits are read from SYSTIMH/L so check to see that the time is incrementing at a reasonable rate and is a multiple of the time incremental value. Removes a redundant igb PHY power down register write. Andi Kleen out of lines two write functions for e1000e to save 30k text size. Tobias Klauser converts the e1000 and i40evf drivers to use the is_broadcast_ether_addr() and is_multicast_ether_addr(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 May, 2014 15 commits
-
-
Tobias Klauser authored
Use the is_multicast_ether_addr helper function from linux/etherdevice.h instead of open coding the multicast address check. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tobias Klauser authored
Use the is_broadcast_ether_addr/is_multicast_ether_addr helper functions from linux/etherdevice.h instead of open coding them. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Todd Fujinaka authored
One of the registers used to power down the PHY was found to be wrong (should be bit 2 not bit 1) on further inspection it was also found to be redundant. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Andi Kleen authored
Out of lining these two common inlines saves about 30k text size, due to their errata workarounds. 14131431 2008136 1507328 17646895 10d452f vmlinux-before-e1000e 14101415 2004040 1507328 17612783 10cbfef vmlinux-e1000e Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David Ertman authored
Previously, the update_phy_task was only calling e1000_set_eee_pchlan() for phy.type 82579. This patch is to cause this function to be called for 82579 and newer phy.types. This causes the dev_spec->eee_lp_ability to have the correct value when going into SX states. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David Ertman authored
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Todd Fujinaka authored
Due to a synchronization error, the value read from SYSTIML/SYSTIMH might be incorrect. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David Ertman authored
Previously, the check to turn on promiscuous mode only took into account the total number of SHared Receive Address (SHRA) registers and if the request was for a register within that range. It is possible that the Management Engine might have locked a number of SHRA and not allowed a new address to be written to the requested register. Add a function to determine the number of unlocked SHRA registers. Then determine if the number of registers available is sufficient for our needs, if not then return -ENOMEM so that UNICAST PROMISC mode is activated. Since the method by which ME claims SHRA registers is non-deterministic, also add a return value to the function attempting to write an address to a SHRA, and return a -E1000_ERR_CONFIG if the write fails. The error will be passed up the function chain and allow the driver to also set UNICAST PROMISC when this happens. Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Resume path calls .open but suspend path cannot call .stop because fdirs should not be freed and control over hardware should not be released until WoL is configured. To avoid having to duplicate all changes made in .stop on suspend path split out part of .stop that is relevant during suspend and call it from .stop and during suspend. This fix also ensures that ixgbe_ptp_suspend is called during the suspend path, and helps avoid similar errors. We can't call ixgbe_ptp_stop, since it will free the PTP clock device, which we shouldn't be doing during a suspend path. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Since we are adding proper support for suspend of PTP, extract out of ixgbe_ptp_stop those things relevant to suspend. Then, have ixgbe_ptp_stop call ixgbe_ptp_suspend. The next patch in the series will have ixgbe_ptp_suspend called from the ixgbe_suspend path. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
In order to properly handle a suspend/resume cycle, we cannot destroy the PTP clock device. As part of this, we should only re-create the device on first initialization. After a resume, when ixgbe_ptp_init is called, we won't create a new clock, and we will use the old clock device. To that end, this patch extracts the clock creation out of ptp_init, and only calls it if we don't already have a ptp_clock pointer. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Rather than clearing the hwtstamp configuration, we should use the known configuration requested by the user and call the function which has now been separated from the ioctl. This means that after a reset, the timestamp mode will be maintained rather than lost. We still can't maintain the clock value, however. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Currently all of the hardware setup logic for the PTP hardware bits is buried inside of the ioctl which sets the timestamp configuration. This makes it hard to use this logic in other places (primarily reset), and this means we can't restore current timestamp mode upon a MAC reset. Extracting this logic into a separate function will enable future work for the ixgbe_ptp_reset function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Since the name ixgbe_ptp_enable could be misconstrued as a function which enables the whole PTP core, rename this function so that it is clear the function is for enabling of the extra features such as PPS signal. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
Driver was calling setup_link to make sure that fiber interfaces with MNG FW enabled will get link on probe because the laser was most likely turned off. This prevented non-fiber devices with MNG FW from linking at 100Mbps. This patch adds a check to only call setup_link for fiber devices. Reported-and-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 26 May, 2014 6 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: sysfs: documentation updates This patch set contains some updates to the sysfs Documentation for the sysfs net class. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Document the network device statistics counter that are exposed as sysfs attributes. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Add sysfs documentation for the various attributes of a network interface exposed in /sys/class/<iface>/queues/{rx,tx}-<queue>/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Add documentation for the phys_port_id sysfs attribute of a network device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira authored
Before f5efc696 ("netfilter: nf_tables: Add meta expression key for bridge interface name"), the entire net/bridge/netfilter/ directory depended on BRIDGE_NF_EBTABLES, ie. on ebtables. However, that directory already contained the nf_tables bridge extension that we should allow to compile separately. In f5efc696, we tried to generalize this by using CONFIG_BRIDGE_NETFILTER which was not a good idea since this option already existed and it is dedicated to enable the Netfilter bridge IP/ARP filtering. Let's try to fix this mess by: 1) making net/bridge/netfilter/ dependent on the toplevel CONFIG_NETFILTER option, just like we do with the net/netfilter and net/ipv{4,6}/netfilter/ directories. 2) Changing 'selects' to 'depends on' NETFILTER_XTABLES for BRIDGE_NF_EBTABLES. I believe this problem was already before f5efc696: warning: (BRIDGE_NF_EBTABLES) selects NETFILTER_XTABLES which has unmet direct dependencies (NET && INET && NETFILTER) 3) Fix ebtables/nf_tables bridge dependencies by making NF_TABLES_BRIDGE and BRIDGE_NF_EBTABLES dependent on BRIDGE and NETFILTER: warning: (NF_TABLES_BRIDGE && BRIDGE_NF_EBTABLES) selects BRIDGE_NETFILTER which has unmet direct dependencies (NET && BRIDGE && NETFILTER && INET && NETFILTER_ADVANCED) net/built-in.o: In function `br_parse_ip_options': br_netfilter.c:(.text+0x4a5ba): undefined reference to `ip_options_compile' br_netfilter.c:(.text+0x4a5ed): undefined reference to `ip_options_rcv_srr' net/built-in.o: In function `br_nf_pre_routing_finish': br_netfilter.c:(.text+0x4a8a4): undefined reference to `ip_route_input_noref' br_netfilter.c:(.text+0x4a987): undefined reference to `ip_route_output_flow' make: *** [vmlinux] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Engelmayer authored
Commit de906af1 (net: phy: make of_set_phy_supported work with genphy driver) removed the last user of variable 'max_speed' in function of_mdiobus_register_phy(), leading to compile warning "unused variable ‘max_speed’ [-Wunused-variable]". Thus remove it. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 May, 2014 2 commits
-
-
Prashant Sreedharan authored
When cable is not present the clock speed of some of the devices is reduced based upon power saving mode setting in NVRAM. Due to this NVRAM reads take long time to complete as a result CPU soft lockup message is seen. Fix is to override clock, disable link aware and link idle modes before NVRAM reads and restore them back after the reads are complete. During this period also check if the thread needs to be rescheduled and if there are any signals to handle. Also decrease the NVRAM command execution timeout value to 1ms. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Wei authored
kernel always invokes a pair of rtnl_lock adn rtnl_unlock to protect dev_ethtool(), so its not neccessary to invoke spin_lock/unlock in ethtool_ops. Signed-off-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 May, 2014 8 commits
-
-
Daniel Borkmann authored
sock_fprog and sock_fprog_kern are of equal size, however it's cleaner to just use sizeof(*fprog) instead to always have correct type. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
As it may then take longer than what the user specified using setsockopt(SO_RCVTIMEO). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Boyd says: ==================== ks8851 DT/regulator/gpio updates This set of patches properly documents the micrel ks8851 spi ethernet controller, converts to devm_regulator_get_optional() to make error paths slightly simpler, and finally adds supports for another optional regulator and a reset gpio. This allows me to use the ks8851 on my MSM8960 CDP board. Changes since v1: * Dropped vendor prefix patch as that should go through DT tree ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Boyd authored
Users are currently just providing "ks8851" as the compatible for this driver in device tree. Add a compatible string that provides the vendor name along with the device name to be more explicit. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Boyd authored
Allow the ks8851 driver to enable an optional 1.8V vdd_io regulator and assert the reset pin to the phy if a reset gpio is present in device tree. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Boyd authored
This simplifies error paths and removes the need to regulator_put(). Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Boyd authored
The ks8851 SPI ethernet wasn't documented, but we documented the optional regulator supply for it under the mll based ethernet chip. Furthermore, that compatible string needed another 'l'. Fix all of this and document the optional vdd-io and reset-gpios properties. Cc: Nishanth Menon <nm@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 May, 2014 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "A small bunch of bug fixes, in particular: 1) On older cpus we need a different chunk of virtual address space to map the huge page TSB. 2) Missing memory barrier in Niagara2 memcpy. 3) trinity showed some places where fault validation was unnecessarily loud on sparc64 4) Some sysfs printf's need a type adjustment, from Toralf Förster" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: fix format string mismatch in arch/sparc/kernel/sysfs.c sparc64: Add membar to Niagara2 memcpy code. sparc64: Fix huge TSB mapping on pre-UltraSPARC-III cpus. sparc64: Don't bark so loudly about 32-bit tasks generating 64-bit fault addresses.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "It looks like a sizeble collection but this is nearly 3 weeks of bug fixing while you were away. 1) Fix crashes over IPSEC tunnels with NAT, the latter can reroute the packet through a non-IPSEC protected path and the code has to be able to handle SKBs attached to routes lacking an attached xfrm state. From Steffen Klassert. 2) Fix OOPSs in ipv4 and ipv6 ipsec layers for unsupported sub-protocols, also from Steffen Klassert. 3) Set local_df on fragmented netfilter skbs otherwise we won't be able to forward successfully, from Florian Westphal. 4) cdc_mbim ipv6 neighbour code does __vlan_find_dev_deep without holding RCU lock, from Bjorn Mork. 5) local_df test in ip_may_fragment is inverted, from Florian Westphal. 6) jme driver doesn't check for DMA mapping failures, from Neil Horman. 7) qlogic driver doesn't calculate number of TX queues properly, from Shahed Shaikh. 8) fib_info_cnt can drift irreversibly positive if we fail to allocate the fi->fib_metrics array, from Sergey Popovich. 9) Fix use after free in ip6_route_me_harder(), also from Sergey Popovich. 10) When SYSCTL is disabled, we don't handle local_port_range and ping_group_range defaults properly at all, from Cong Wang. 11) Unaccelerated VLAN tagged frames improperly handled by cdc_mbim driver, fix from Bjorn Mork. 12) cassini driver needs nested lock annotations for TX locking, from Emil Goode. 13) On init error ipv6 VTI driver can unregister pernet ops twice, oops. Fix from Mahtias Krause. 14) If macvlan device is down, don't propagate IFF_ALLMULTI changes, from Peter Christensen. 15) Missing NULL pointer check while parsing netlink config options in ip6_tnl_validate(). From Susant Sahani. 16) Fix handling of neighbour entries during ipv6 router reachability probing, from Duan Jiong. 17) x86 and s390 JIT address randomization has some address calculation bugs leading to crashes, from Alexei Starovoitov and Heiko Carstens. 18) Clear up those uglies with nop patching and net_get_random_once(), from Hannes Frederic Sowa. 19) Option length miscalculated in ip6_append_data(), fix also from Hannes Frederic Sowa. 20) A while ago we fixed a race during device unregistry when a namespace went down, turns out there is a second place that needs similar protection. From Cong Wang. 21) In the new Altera TSE driver multicast filtering isn't working, disable it and just use promisc mode until the cause is found. From Vince Bridgers. 22) When we disable router enabling in ipv6 we have to flush the cached routes explicitly, from Duan Jiong. 23) NBMA tunnels should not cache routes on the tunnel object because the key is variable, from Timo Teräs. 24) With stacked devices GRO information in skb->cb[] can be not setup properly, make sure it is in all code paths. From Eric Dumazet. 25) Really fix stacked vlan locking, multiple levels of nesting with intervening non-vlan devices are possible. From Vlad Yasevich. 26) Fallback ipip tunnel device's mtu is not setup properly, from Steffen Klassert. 27) The packet scheduler's tcindex filter can crash because we structure copy objects with list_head's inside, oops. From Cong Wang. 28) Fix CHECKSUM_COMPLETE handling for ipv6 GRE tunnels, from Eric Dumazet. 29) In some configurations 'itag' in __mkroute_input() can end up being used uninitialized because of how fib_validate_source() works. Fix it by explitly initializing itag to zero like all the other fib_validate_source() callers do, from Li RongQing" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) batman: fix a bogus warning from batadv_is_on_batman_iface() ipv4: initialise the itag variable in __mkroute_input bonding: Send ALB learning packets using the right source bonding: Don't assume 802.1Q when sending alb learning packets. net: doc: Update references to skb->rxhash stmmac: Remove unbalanced clk_disable call ipv6: gro: fix CHECKSUM_COMPLETE support net_sched: fix an oops in tcindex filter can: peak_pci: prevent use after free at netdev removal ip_tunnel: Initialize the fallback device properly vlan: Fix build error wth vlan_get_encap_level() can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option MAINTAINERS: Pravin Shelar is Open vSwitch maintainer. bnx2x: Convert return 0 to return rc bonding: Fix alb mode to only use first level vlans. bonding: Fix stacked device detection in arp monitoring macvlan: Fix lockdep warnings with stacked macvlan devices vlan: Fix lockdep warning with stacked vlan devices. net: Allow for more then a single subclass for netif_addr_lock net: Find the nesting level of a given device by type. ...
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF updates These were still in my queue. Please see individual patches for details. I have rebased these on top of current net-next with Andrew's gcc union fixup [1] applied to avoid dealing with an unnecessary merge conflict. [1] http://patchwork.ozlabs.org/patch/351577/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-