- 30 Oct, 2020 40 commits
-
-
Hoang Huu Le authored
dist_queue is no longer used since commit 37922ea4 ("tipc: permit overlapping service ranges in name table") Acked-by:
Jon Maloy <jmaloy@redhat.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Hoang Huu Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201028032712.31009-1-hoang.h.le@dektech.com.auSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Andrew Lunn authored
net/ipv6/calipso.c:1236: warning: Excess function parameter 'reg' description in 'calipso_req_delattr' net/ipv6/calipso.c:1236: warning: Function parameter or member 'req' not described in 'calipso_req_delattr' net/ipv6/calipso.c:435: warning: Excess function parameter 'audit_secid' description in 'calipso_doi_remove' net/ipv6/calipso.c:435: warning: Function parameter or member 'audit_info' not described in 'calipso_doi_remove' Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201028013344.931928-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
net/ipv6/rpl_iptunnel.c:15: warning: cannot understand function prototype: 'struct rpl_iptunnel_encap ' The header on the file containing the author copyright message uses kerneldoc /** opener. This confuses the parser when it gets to struct rpl_iptunnel_encap { struct ipv6_rpl_sr_hdr srh[0]; }; Similarly: net//ipv6/rpl.c:10: warning: Function parameter or member 'x' not described in 'IPV6_PFXTAIL_LEN' where IPV6_PFXTAIL_LEN is a macro definition, not a function. Convert the header comments to a plain /* comment. Signed-off-by: -
Andrew Lunn authored
net//ipv4/tcp_lp.c:120: warning: Function parameter or member 'sk' not described in 'tcp_lp_cong_avoid' net//ipv4/tcp_lp.c:135: warning: Function parameter or member 'sk' not described in 'tcp_lp_remote_hz_estimator' net//ipv4/tcp_lp.c:188: warning: Function parameter or member 'sk' not described in 'tcp_lp_owd_calculator' net//ipv4/tcp_lp.c:222: warning: Function parameter or member 'rtt' not described in 'tcp_lp_rtt_sample' net//ipv4/tcp_lp.c:222: warning: Function parameter or member 'sk' not described in 'tcp_lp_rtt_sample' net//ipv4/tcp_lp.c:265: warning: Function parameter or member 'sk' not described in 'tcp_lp_pkts_acked' net//ipv4/tcp_lp.c:97: warning: Function parameter or member 'sk' not described in 'tcp_lp_init' There are still a few kerneldoc warnings after this fix. Signed-off-by:
-
Andrew Lunn authored
net/dccp/ccids/ccid2.c:190: warning: Function parameter or member 'hc' not described in 'ccid2_update_used_window' net/dccp/ccids/ccid2.c:190: warning: Function parameter or member 'new_wnd' not described in 'ccid2_update_used_window' net/dccp/ccids/ccid2.c:360: warning: Function parameter or member 'sk' not described in 'ccid2_rtt_estimator' net/dccp/ccids/ccid3.c:112: warning: Function parameter or member 'sk' not described in 'ccid3_hc_tx_update_x' net/dccp/ccids/ccid3.c:159: warning: Function parameter or member 'hc' not described in 'ccid3_hc_tx_update_s' net/dccp/ccids/ccid3.c:268: warning: Function parameter or member 'sk' not described in 'ccid3_hc_tx_send_packet' net/dccp/ccids/ccid3.c:667: warning: Function parameter or member 'sk' not described in 'ccid3_first_li' net/dccp/ccids/ccid3.c:85: warning: Function parameter or member 'hc' not described in 'ccid3_update_send_interval' net/dccp/ccids/lib/loss_interval.c:85: warning: Function parameter or member 'lh' not described in 'tfrc_lh_update_i_mean' net/dccp/ccids/lib/loss_interval.c:85: warning: Function parameter or member 'skb' not described in 'tfrc_lh_update_i_mean' net/dccp/ccids/lib/packet_history.c:392: warning: Function parameter or member 'h' not described in 'tfrc_rx_hist_sample_rtt' net/dccp/ccids/lib/packet_history.c:392: warning: Function parameter or member 'skb' not described in 'tfrc_rx_hist_sample_rtt' net/dccp/feat.c:1003: warning: Function parameter or member 'dreq' not described in 'dccp_feat_server_ccid_dependencies' net/dccp/feat.c:1040: warning: Function parameter or member 'array_len' not described in 'dccp_feat_prefer' net/dccp/feat.c:1040: warning: Function parameter or member 'array' not described in 'dccp_feat_prefer' net/dccp/feat.c:1040: warning: Function parameter or member 'preferred_value' not described in 'dccp_feat_prefer' net/dccp/output.c:151: warning: Function parameter or member 'dp' not described in 'dccp_determine_ccmps' net/dccp/output.c:242: warning: Function parameter or member 'sk' not described in 'dccp_xmit_packet' net/dccp/output.c:305: warning: Function parameter or member 'sk' not described in 'dccp_flush_write_queue' net/dccp/output.c:305: warning: Function parameter or member 'time_budget' not described in 'dccp_flush_write_queue' net/dccp/output.c:378: warning: Function parameter or member 'sk' not described in 'dccp_retransmit_skb' net/dccp/qpolicy.c:88: warning: Function parameter or member '' not described in 'dccp_qpolicy_operations' net/dccp/qpolicy.c:88: warning: Function parameter or member '{' not described in 'dccp_qpolicy_operations' net/dccp/qpolicy.c:88: warning: Function parameter or member 'params' not described in 'dccp_qpolicy_operations' Signed-off-by: -
Andrew Lunn authored
net//dcb/dcbnl.c:1836: warning: Function parameter or member 'app' not described in 'dcb_getapp' net//dcb/dcbnl.c:1836: warning: Function parameter or member 'dev' not described in 'dcb_getapp' net//dcb/dcbnl.c:1858: warning: Function parameter or member 'dev' not described in 'dcb_setapp' net//dcb/dcbnl.c:1858: warning: Function parameter or member 'new' not described in 'dcb_setapp' net//dcb/dcbnl.c:1899: warning: Function parameter or member 'app' not described in 'dcb_ieee_getapp_mask' net//dcb/dcbnl.c:1899: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_mask' net//dcb/dcbnl.c:1922: warning: Function parameter or member 'dev' not described in 'dcb_ieee_setapp' net//dcb/dcbnl.c:1922: warning: Function parameter or member 'new' not described in 'dcb_ieee_setapp' net//dcb/dcbnl.c:1953: warning: Function parameter or member 'del' not described in 'dcb_ieee_delapp' net//dcb/dcbnl.c:1953: warning: Function parameter or member 'dev' not described in 'dcb_ieee_delapp' net//dcb/dcbnl.c:1986: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_prio_dscp_mask_map' net//dcb/dcbnl.c:1986: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_prio_dscp_mask_map' net//dcb/dcbnl.c:2016: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_dscp_prio_mask_map' net//dcb/dcbnl.c:2016: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_dscp_prio_mask_map' net//dcb/dcbnl.c:2045: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_default_prio_mask' For some of these warnings, change to comments to plain comments, since no attempt is being made to follow kerneldoc syntax. Signed-off-by:
-
Andrew Lunn authored
net//nfc/core.c:1046: warning: Function parameter or member 'tx_headroom' not described in 'nfc_allocate_device' net//nfc/core.c:1046: warning: Function parameter or member 'tx_tailroom' not described in 'nfc_allocate_device' net//nfc/core.c:198: warning: Excess function parameter 'protocols' description in 'nfc_start_poll' net//nfc/core.c:198: warning: Function parameter or member 'im_protocols' not described in 'nfc_start_poll' net//nfc/core.c:198: warning: Function parameter or member 'tm_protocols' not described in 'nfc_start_poll' net//nfc/core.c:441: warning: Function parameter or member 'mode' not described in 'nfc_deactivate_target' net//nfc/core.c:711: warning: Function parameter or member 'dev' not described in 'nfc_alloc_send_skb' net//nfc/core.c:711: warning: Function parameter or member 'err' not described in 'nfc_alloc_send_skb' net//nfc/core.c:711: warning: Function parameter or member 'flags' not described in 'nfc_alloc_send_skb' net//nfc/core.c:711: warning: Function parameter or member 'sk' not described in 'nfc_alloc_send_skb' net//nfc/digital_core.c:470: warning: Function parameter or member 'im_protocols' not described in 'digital_start_poll' net//nfc/digital_core.c:470: warning: Function parameter or member 'nfc_dev' not described in 'digital_start_poll' net//nfc/digital_core.c:470: warning: Function parameter or member 'tm_protocols' not described in 'digital_start_poll' net//nfc/nci/core.c:1119: warning: Function parameter or member 'tx_headroom' not described in 'nci_allocate_device' net//nfc/nci/core.c:1119: warning: Function parameter or member 'tx_tailroom' not described in 'nci_allocate_device' Signed-off-by:
-
Andrew Lunn authored
net/appletalk/aarp.c:68: warning: Function parameter or member 'dev' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'expires_at' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'hwaddr' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'last_sent' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'next' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'packet_queue' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'status' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'target_addr' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'xmit_count' not described in 'aarp_entry' net/appletalk/ddp.c:1422: warning: Function parameter or member 'dev' not described in 'atalk_rcv' net/appletalk/ddp.c:1422: warning: Function parameter or member 'orig_dev' not described in 'atalk_rcv' net/appletalk/ddp.c:1422: warning: Function parameter or member 'pt' not described in 'atalk_rcv' net/appletalk/ddp.c:1422: warning: Function parameter or member 'skb' not described in 'atalk_rcv' Signed-off-by:
-
Andrew Lunn authored
net/netlabel/netlabel_calipso.c:376: warning: Function parameter or member 'ops' not described in 'netlbl_calipso_ops_register' Signed-off-by:
Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20201028005350.930299-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
net/l3mdev/l3mdev.c:249: warning: Function parameter or member 'arg' not described in 'l3mdev_fib_rule_match' Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201028005059.930192-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
net/openvswitch/flow.c:303: warning: Function parameter or member 'key_vh' not described in 'parse_vlan_tag' net/openvswitch/flow.c:303: warning: Function parameter or member 'skb' not described in 'parse_vlan_tag' net/openvswitch/flow.c:303: warning: Function parameter or member 'untag_vlan' not described in 'parse_vlan_tag' net/openvswitch/vport.c:122: warning: Function parameter or member 'parms' not described in 'ovs_vport_alloc' Signed-off-by:
-
Andrew Lunn authored
net/llc/llc_conn.c:917: warning: Function parameter or member 'kern' not described in 'llc_sk_alloc' net/llc/llc_conn.c:917: warning: Function parameter or member 'prot' not described in 'llc_sk_alloc' Signed-off-by:
-
Jakub Kicinski authored
Andrew Lunn says: ==================== Markup some printk like functions W=1 warns of functions which look like printk but don't have attributes so the compile can check that arguments matches the format string. ==================== Link: https://lore.kernel.org/r/20201028003849.929490-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
net/tipc/netlink_compat.c: In function ‘tipc_tlv_sprintf’: net/tipc/netlink_compat.c:137:2: warning: function ‘tipc_tlv_sprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 137 | n = vscnprintf(buf, rem, fmt, args); Signed-off-by:
-
Andrew Lunn authored
net/dccp/ccid.c: In function ‘ccid_kmem_cache_create’: net/dccp/ccid.c:85:2: warning: function ‘ccid_kmem_cache_create’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 85 | vsnprintf(slab_name_fmt, CCID_SLAB_NAME_LENGTH, fmt, args); Signed-off-by:
-
Andrew Lunn authored
Now that the compiler is performing printf checking, we get the warning: net/tipc/netlink_compat.c: In function ‘tipc_nl_compat_link_stat_dump’: net/tipc/netlink_compat.c:591:39: warning: format ‘%s’ expects argument of type ‘char *’, but argument 3 has type ‘void *’ [-Wformat=] 591 | tipc_tlv_sprintf(msg->rep, "\nLink <%s>\n", | ~^ | | | char * | %p 592 | nla_data(link[TIPC_NLA_LINK_NAME])); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | void * There is no nla_string(), so cast to a char *. Signed-off-by: -
Jakub Kicinski authored
Nikolay Aleksandrov says: ==================== selftests: net: bridge: add tests for IGMPv3 This set adds tests for the bridge's new IGMPv3 support. The tests use precooked packets which are sent via mausezahn and the resulting state after each test is checked for proper X,Y sets, (*,G) source list, source list entry timers, (S,G) existence and flags, packet forwarding and blocking, exclude group expiration and (*,G) auto-add. The first 3 patches prepare the existing IGMPv2 tests, then patch 4 adds new helpers which are used throughout the rest of the v3 tests. The following new tests are added: - base case: IGMPv3 report 239.10.10.10 is_include (A) - include -> allow report - include -> is_include report - include -> is_exclude report - include -> to_exclude report - exclude -> allow report - exclude -> is_include report - exclude -> is_exclude report - exclude -> to_exclude report - include -> block report - exclude -> block report - exclude timeout (move to include + entry deletion) - S,G port entry automatic add to a *,G,exclude port The variable names and set notation are the same as per RFC 3376, for more information check RFC 3376 sections 4.2.15 and 6.4.1. MLDv2 tests will be added by a separate patch-set. ==================== Link: https://lore.kernel.org/r/20201027185934.227040-1-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
When we have *,G ports in exclude mode and a new S,G,port is added the kernel has to automatically create an S,G entry for each exclude port to get proper forwarding. Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Test that when a group in exclude mode expires it changes mode to include and the blocked entries are deleted. Signed-off-by:
-
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) BLOCK (A) EXCLUDE (X+(A-Y),Y) (A-X-Y)=Group Timer Send Q(G,A-Y) Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) BLOCK (B) INCLUDE (A) Send Q(G,A*B) Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=Group Timer Delete (X-A) Delete (Y-A) Send Q(G,A-Y) Group Timer=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=GMI Delete (X-A) Delete (Y-A) Group Timer=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A,Y-A) (A)=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action EXCLUDE (X,Y) ALLOW (A) EXCLUDE (X+A,Y-A) (A)=GMI Signed-off-by:
-
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0 Delete (A-B) Send Q(G,A*B) Group Timer=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) IS_EX (B) EXCLUDE (A*B,B-A) (B-A)=0 Delete (A-B) Group Timer=GMI Signed-off-by: -
Nikolay Aleksandrov authored
The test checks for the following case: state report result action INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=GMI Signed-off-by:
-
Nikolay Aleksandrov authored
First we test is_include/include mode then we build on that with allow effectively achieving: state report result action INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=GMI Signed-off-by:
-
Nikolay Aleksandrov authored
Add helpers which will be used in subsequent tests, they are: - check_sg_entries: check for proper source list and S,G entry existence - check_sg_fwding: check for proper traffic forwarding/blocking - check_sg_state: check for proper blocked/forwarding entry state Signed-off-by:
-
Nikolay Aleksandrov authored
We have to specifically check for udp protocol in addition to the mac address because in IGMPv3 tests group-specific queries will use the same mac address. Signed-off-by:
-
Nikolay Aleksandrov authored
Add support for one more argument which specifies the source address to use. It will be later used for IGMPv3 S,G entry testing. Signed-off-by:
-
Nikolay Aleksandrov authored
To prepare the bridge_igmp.sh for IGMPv3 we need to rename the current test to IGMPv2. Signed-off-by:
-
Andy Shevchenko authored
Refactor phy_led_trigger_register() and deduplicate its functionality when registering LED trigger for link. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Vineetha G. Jaya Kumaran authored
This patch enables the HW LPI Timer which controls the automatic entry and exit of the LPI state. The EEE LPI timer value is configured through ethtool. The driver will auto select the LPI HW timer if the value in the HW timer supported range. Else, the driver will fallback to SW timer. Signed-off-by:
Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Link: https://lore.kernel.org/r/20201027160051.22898-1-weifeng.voon@intel.comSigned-off-by:
-
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playgroundJakub Kicinski authored
Arnd Bergmann says: ==================== wimax: move to staging After I sent a fix for what appeared to be a harmless warning in the wimax user interface code, the conclusion was that the whole thing has most likely not been used in a very long time, and the user interface possibly been broken since b61a5eea ("wimax: use genl_register_family_with_ops()"). Using a shared branch between net-next and staging should help coordinate patches getting submitted against it. ==================== Signed-off-by:
-
Jon Maloy authored
TIPC reserves 64 service types for current and future internal use. Therefore, the bind() function is meant to block regular user sockets from being bound to these values, while it should let through such bindings from internal users. However, since we at the design moment saw no way to distinguish between regular and internal users the filter function ended up with allowing all bindings of the reserved types which were really in use ([0,1]), and block all the rest ([2,63]). This is risky, since a regular user may bind to the service type representing the topology server (TIPC_TOP_SRV == 1) or the one used for indicating neighboring node status (TIPC_CFG_SRV == 0), and wreak havoc for users of those services, i.e., most users. The reality is however that TIPC_CFG_SRV never is bound through the bind() function, since it doesn't represent a regular socket, and TIPC_TOP_SRV can also be made to bypass the checks in tipc_bind() by introducing a different entry function, tipc_sk_bind(). It should be noted that although this is a change of the API semantics, there is no risk we will break any currently working applications by doing this. Any application trying to bind to the values in question would be badly broken from the outset, so there is no chance we would find any such applications in real-world production systems. v2: Added warning printout when a user is blocked from binding, as suggested by Jakub Kicinski Acked-by: -
Zhang Qilong authored
The 'break' is unnecessary because of previous 'return', and we could discard it. Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201027135159.71444-1-zhangqilong3@huawei.comSigned-off-by:
-
Łukasz Stelmach authored
Unify the set of information returned by mii_ethtool_get_link_ksettings(), mii_ethtool_gset() and phy_ethtool_ksettings_get(). Make the mii_*() functions report advertised settings when autonegotiation if disabled. Suggested-by:
Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by:
-
Jakub Kicinski authored
Henrik Bjoernlund says: ==================== net: bridge: cfm: Add support for Connectivity Fault Management(CFM) Connectivity Fault Management (CFM) is defined in 802.1Q section 12.14. Connectivity Fault Management (CFM) comprises capabilities for detecting, verifying, and isolating connectivity failures in Virtual Bridged Networks. These capabilities can be used in networks operated by multiple independent organizations, each with restricted management access to each other’s equipment. CFM functions are partitioned as follows: — Path discovery — Fault detection — Fault verification and isolation — Fault notification — Fault recovery The primary CFM protocol shims are called Maintenance Points (MPs). A MP can be either a MEP or a MHF. The MEP: -It is the Maintenance association End Point described in 802.1Q section 19.2. -It is created on a specific level (1-7) and is assuring that no CFM frames are passing through this MEP on lower levels. -It initiates and terminates/validates CFM frames on its level. -It can only exist on a port that is related to a bridge. The MHF: -It is the Maintenance Domain Intermediate Point (MIP) Half Function (MHF) described in 802.1Q section 19.3. -It is created on a specific level (1-7). -It is extracting/injecting certain CFM frame on this level. -It can only exist on a port that is related to a bridge. -Currently not supported. There are defined the following CFM protocol functions: -Continuity Check -Loopback. Currently not supported. -Linktrace. Currently not supported. This CFM component supports create/delete of MEP instances and configuration of the different CFM protocols. Also status information can be fetched and delivered through notification due to defect status change. The user interacts with CFM using the 'cfm' user space client program, the client talks with the kernel using netlink. Any notification emitted by CFM from the kernel can be monitored in user space by starting 'cfm_server' program. Currently this 'cfm' and 'cfm_server' programs are standalone placed in a cfm repository https://github.com/microchip-ung/cfm but it is considered to integrate this into 'iproute2'. v1 -> v2 Added the CFM switchdev interface and also added utilization by calling the interface from the kernel CFM implementation trying to offload CFM functionality to HW. This offload (CFM driver) is currently not implemented. Corrections based on RCF comments: -The single CFM kernel implementation Patch is broken up into three patches. -Changed the list of MEP instances from list_head to hlist_head. -Removed unnecessary RCU list traversing. -Solved RCU unlocking problem. -Removed unnecessary comments. -Added ASSERT_RTNL() where required. -Shaping up on error messages. -Correction NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. v2 -> v3 -The switchdev definition and utilization has been removed as there was no switchdev implementation. -Some compiling issues are fixed as Reported-by: kernel test robot <lkp@intel.com>. v3 -> v4 -Fixed potential crash during hlist walk where elements are removed. -Giving all commits unique titles. -NETLINK implementation split into three commits. -Commit "bridge: cfm: Bridge port remove" is merged with commit "bridge: cfm: Kernel space implementation of CFM. MEP create/delete." v4 -> v5 -Reordered members in struct net_bridge to bring member frame_type_list to the first cache line. -Helper functions nla_get_mac() and nla_get_maid() are removed. -The NLA_POLICY_NESTED() macro is used to initialize the br_cfm_policy array. -Fixed reverse xmas tree. v5 -> v6 -Fixed that the SKB buffer was not freed during error handling return. -Removed unused struct definition. -Changed bool to u8 bitfields for space save. -Utilizing the NETLINK policy validation feature. v6 -> v7 -Removed check of parameters in br_cfm_mep_config_set() and br_cfm_cc_peer_mep_add() in first commit of MEP implementation (Patch 4 out of 10) Reviewed-by:Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
Henrik Bjoernlund <henrik.bjoernlund@microchip.com> ==================== Link: https://lore.kernel.org/r/20201027100251.3241719-1-henrik.bjoernlund@microchip.comSigned-off-by:
-
