Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
 variable old_state set but not used [-Wunused-but-set-variable]

It is never used so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Instead of trying to allocate pages with GFP_USER in
add_ballooned_pages() check the available free memory via
si_mem_available(). GFP_USER is far less limiting memory exhaustion
than the test via si_mem_available().

This will avoid dom0 running out of memory due to excessive foreign
page mappings especially on ARM and on x86 in PVH mode, as those don't
have a pre-ballooned area which can be used for foreign mappings.

As the normal ballooning suffers from the same problem don't balloon
down more than si_mem_available() pages in one iteration. At the same
time limit the default maximum number of retries.

This is part of XSA-300.
Signed-off-by: Juergen Gross <jgross@suse.com>

Commit 7457c0da ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.

This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:

[    0.772876] general protection fault: 0000 [#1] SMP NOPTI
[    0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[    0.772893] RIP: e030:int3_magic+0x0/0x7
[    0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[    0.773334] Call Trace:
[    0.773334]  alternative_instructions+0x3d/0x12e
[    0.773334]  check_bugs+0x7c9/0x887
[    0.773334]  ? __get_locked_pte+0x178/0x1f0
[    0.773334]  start_kernel+0x4ff/0x535
[    0.773334]  ? set_init_arg+0x55/0x55
[    0.773334]  xen_start_kernel+0x571/0x57a

For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.

E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
 pop %rcx;
 pop %r11;
 jmp xenint3

As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

PVH guest needs PV extentions to work, so "nopv" parameter should be
ignored for PVH but not for HVM guest.

If PVH guest boots up via the Xen-PVH boot entry, xen_pvh is set early,
we know it's PVH guest and ignore "nopv" parameter directly.

If PVH guest boots up via the normal boot entry same as HVM guest, it's
hard to distinguish PVH and HVM guest at that time. In this case, we
have to panic early if PVH is detected and nopv is enabled to avoid a
worse situation later.

Remove static from bool_x86_init_noop/x86_op_int_noop so they could be
used globally. Move xen_platform_hvm() after xen_hvm_guest_late_init()
to avoid compile error.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>

.. as "nopv" support needs it to be changeable at boot up stage.

Checkpatch reports warning, so move variable declarations from
hypervisor.c to hypervisor.h
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>

Clean up unnecessory code after that operation.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>

In virtualization environment, PV extensions (drivers, interrupts,
timers, etc) are enabled in the majority of use cases which is the
best option.

However, in some cases (kexec not fully working, benchmarking)
we want to disable PV extensions. We have "xen_nopv" for that purpose
but only for XEN. For a consistent admin experience a common command
line parameter "nopv" set across all PV guest implementations is a
better choice.

There are guest types which just won't work without PV extensions,
like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to
struct hypervisor_x86 set to true for those guest types and call
the detect functions only if nopv is false or ignore_nopv is true.
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>

.. as they are only called at early bootup stage. In fact, other
functions in x86_hyper_xen_hvm.init.* are all marked as __init.

Unexport xen_hvm_need_lapic as it's never used outside.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>

The Xen tmem (transcendent memory) driver can be removed, as the
related Xen hypervisor feature never made it past the "experimental"
state and will be removed in future Xen versions (>= 4.13).

The xen-selfballoon driver depends on tmem, so it can be removed, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

This reverts commit ca5d376e.

Commit 8990cac6 ("x86/jump_label: Initialize static branching
early") adds jump_label_init() call in setup_arch() to make static
keys initialized early, so we could use the original simpler code
again.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>

When binding an interdomain event channel to a vcpu via
IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be
bound, but the affinity of the associated IRQi must be changed, too.
Otherwise the IRQ and the event channel won't be moved to another vcpu
in case the original vcpu they were bound to is going offline.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: c48f64ab ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull more block updates from Jens Axboe:
 "A later pull request with some followup items. I had some vacation
  coming up to the merge window, so certain things items were delayed a
  bit. This pull request also contains fixes that came in within the
  last few days of the merge window, which I didn't want to push right
  before sending you a pull request.

  This contains:

   - NVMe pull request, mostly fixes, but also a few minor items on the
     feature side that were timing constrained (Christoph et al)

   - Report zones fixes (Damien)

   - Removal of dead code (Damien)

   - Turn on cgroup psi memstall (Josef)

   - block cgroup MAINTAINERS entry (Konstantin)

   - Flush init fix (Josef)

   - blk-throttle low iops timing fix (Konstantin)

   - nbd resize fixes (Mike)

   - nbd 0 blocksize crash fix (Xiubo)

   - block integrity error leak fix (Wenwen)

   - blk-cgroup writeback and priority inheritance fixes (Tejun)"

* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
  MAINTAINERS: add entry for block io cgroup
  null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
  block: Limit zone array allocation size
  sd_zbc: Fix report zones buffer allocation
  block: Kill gfp_t argument of blkdev_report_zones()
  block: Allow mapping of vmalloc-ed buffers
  block/bio-integrity: fix a memory leak bug
  nvme: fix NULL deref for fabrics options
  nbd: add netlink reconfigure resize support
  nbd: fix crash when the blksize is zero
  block: Disable write plugging for zoned block devices
  block: Fix elevator name declaration
  block: Remove unused definitions
  nvme: fix regression upon hot device removal and insertion
  blk-throttle: fix zero wait time for iops throttled group
  block: Fix potential overflow in blk_report_zones()
  blkcg: implement REQ_CGROUP_PUNT
  blkcg, writeback: Implement wbc_blkcg_css()
  blkcg, writeback: Add wbc->no_cgroup_owner
  blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
  ...

Pull i2c updates from Wolfram Sang:
 "New stuff from the I2C world:

   - in the core, getting irqs from ACPI is now similar to OF

   - new driver for MediaTek MT7621/7628/7688 SoCs

   - bcm2835, i801, and tegra drivers got some more attention

   - GPIO API cleanups

   - cleanups in the core headers

   - lots of usual driver updates"

* 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits)
  i2c: mt7621: Fix platform_no_drv_owner.cocci warnings
  i2c: cpm: remove casting dma_alloc
  dt-bindings: i2c: sun6i-p2wi: Fix the binding example
  dt-bindings: i2c: mv64xxx: Fix the example compatible
  i2c: i801: Documentation update
  i2c: i801: Add support for Intel Tiger Lake
  i2c: i801: Fix PCI ID sorting
  dt-bindings: i2c-stm32: document optional dmas
  i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
  i2c: core: Tidy up handling of init_irq
  i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  i2c: core: Move ACPI IRQ handling to probe time
  i2c: acpi: Factor out getting the IRQ from ACPI
  i2c: acpi: Use available IRQ helper functions
  i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  eeprom: at24: modify a comment referring to platform data
  dt-bindings: i2c: omap: Add new compatible for J721E SoCs
  dt-bindings: i2c: mv64xxx: Add YAML schemas
  dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
  i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - add HWMON compat layer
   - new properties:
       - input power limit
       - input voltage limit

  Drivers:
   - qcom-pon: add gen2 support
   - new driver for storing reboot move in NVMEM
   - new driver for Wilco EC charger configuration
   - simplify getting the adapter of a client"

* tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: nvmem-reboot-mode: add CONFIG_OF dependency
  power_supply: wilco_ec: Add charging config driver
  power: supply: cros: allow to set input voltage and current limit
  power: supply: add input power and voltage limit properties
  power: supply: fix semicolon.cocci warnings
  power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
  dt-bindings: power: reset: add document for NVMEM based reboot-mode
  reset: qcom-pon: Add support for gen2 pon
  dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line
  power: supply: Add HWMON compatibility layer
  power: supply: sbs-manager: simplify getting the adapter of a client
  power: supply: rt9455_charger: simplify getting the adapter of a client
  power: supply: rt5033_battery: simplify getting the adapter of a client
  power: supply: max17042_battery: simplify getting the adapter of a client
  power: supply: max17040_battery: simplify getting the adapter of a client
  power: supply: max14656_charger_detector: simplify getting the adapter of a client
  power: supply: bq25890_charger: simplify getting the adapter of a client
  power: supply: bq24257_charger: simplify getting the adapter of a client
  power: supply: bq24190_charger: simplify getting the adapter of a client

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...

Pull rdma updates from Jason Gunthorpe:
 "A smaller cycle this time. Notably we see another new driver, 'Soft
  iWarp', and the deletion of an ancient unused driver for nes.

   - Revise and simplify the signature offload RDMA MR APIs

   - More progress on hoisting object allocation boiler plate code out
     of the drivers

   - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
     i40iw

   - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
     conversion

   - Removal of obsolete ib_ucm chardev and nes driver

   - netlink based discovery of chardevs and autoloading of the modules
     providing them

   - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma

   - New driver 'siw' for software based iWarp running on top of netdev,
     much like rxe's software RoCE.

   - mlx5 feature to report events in their raw devx format to userspace

   - Expose per-object counters through rdma tool

   - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
     from netdev"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
  RMDA/siw: Require a 64 bit arch
  RDMA/siw: Mark expected switch fall-throughs
  RDMA/core: Fix -Wunused-const-variable warnings
  rdma/siw: Remove set but not used variable 's'
  rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
  RDMA/siw: Add missing rtnl_lock around access to ifa
  rdma/siw: Use proper enumerated type in map_cqe_status
  RDMA/siw: Remove unnecessary kthread create/destroy printouts
  IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
  RDMA/core: Fix race when resolving IP address
  RDMA/core: Make rdma_counter.h compile stand alone
  IB/core: Work on the caller socket net namespace in nldev_newlink()
  RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
  RDMA/mlx5: Set RDMA DIM to be enabled by default
  RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
  RDMA/core: Provide RDMA DIM support for ULPs
  linux/dim: Implement RDMA adaptive moderation (DIM)
  IB/mlx5: Report correctly tag matching rendezvous capability
  docs: infiniband: add it to the driver-api bookset
  IB/mlx5: Implement VHCA tunnel mechanism in DEVX
  ...

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...

Pull drm updates from Dave Airlie:
 "The biggest thing in this is the AMD Navi GPU support, this again
  contains a bunch of header files that are large. These are the new AMD
  RX5700 GPUs that just recently became available.

  New drivers:
   - ST-Ericsson MCDE driver
   - Ingenic JZ47xx SoC

  UAPI change:
   - HDR source metadata property

  Core:
   - HDR inforframes and EDID parsing
   - drm hdmi infoframe unpacking
   - remove prime sg_table caching into dma-buf
   - New gem vram helpers to reduce driver code
   - Lots of drmP.h removal
   - reservation fencing fix
   - documentation updates
   - drm_fb_helper_connector removed
   - mode name command handler rewrite

  fbcon:
   - Remove the fbcon notifiers

  ttm:
   - forward progress fixes

  dma-buf:
   - make mmap call optional
   - debugfs refcount fixes
   - dma-fence free with pending signals fix
   - each dma-buf gets an inode

  Panels:
   - Lots of additional panel bindings

  amdgpu:
   - initial navi10 support
   - avoid hw reset
   - HDR metadata support
   - new thermal sensors for vega asics
   - RAS fixes
   - use HMM rather than MMU notifier
   - xgmi topology via kfd
   - SR-IOV fixes
   - driver reload fixes
   - DC use a core bpc attribute
   - Aux fixes for DC
   - Bandwidth calc updates for DC
   - Clock handling refactor
   - kfd VEGAM support

  vmwgfx:
   - Coherent memory support changes

  i915:
   - HDR Support
   - HDMI i2c link
   - Icelake multi-segmented gamma support
   - GuC firmware update
   - Mule Creek Canyon PCH support for EHL
   - EHL platform updtes
   - move i915.alpha_support to i915.force_probe
   - runtime PM refactoring
   - VBT parsing refactoring
   - DSI fixes
   - struct mutex dependency reduction
   - GEM code reorg

  mali-dp:
   - Komeda driver features

  msm:
   - dsi vs EPROBE_DEFER fixes
   - msm8998 snapdragon 835 support
   - a540 gpu support
   - mdp5 and dpu interconnect support

  exynos:
   - drmP.h removal

  tegra:
   - misc fixes

  tda998x:
   - audio support improvements
   - pixel repeated mode support
   - quantisation range handling corrections
   - HDMI vendor info fix

  armada:
   - interlace support fix
   - overlay/video plane register handling refactor
   - add gamma support

  rockchip:
   - RX3328 support

  panfrost:
   - expose perf counters via hidden ioctls

  vkms:
   - enumerate CRC sources list

  ast:
   - rework BO handling

  mgag200:
   - rework BO handling

  dw-hdmi:
   - suspend/resume support

  rcar-du:
   - R8A774A1 Soc Support
   - LVDS dual-link mode support
   - Additional formats
   - Misc fixes

  omapdrm:
   - DSI command mode display support

  stm
   - fb modifier support
   - runtime PM support

  sun4i:
   - use vmap ops

  vc4:
   - binner bo binding rework

  v3d:
   - compute shader support
   - resync/sync fixes
   - job management refactoring

  lima:
   - NULL pointer in irq handler fix
   - scheduler default timeout

  virtio:
   - fence seqno support
   - trace events

  bochs:
   - misc fixes

  tc458767:
   - IRQ/HDP handling

  sii902x:
   - HDMI audio support

  atmel-hlcdc:
   - misc fixes

  meson:
   - zpos support"

* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
  Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
  Revert "mm: adjust apply_to_pfn_range interface for dropped token."
  mm: adjust apply_to_pfn_range interface for dropped token.
  drm/amdgpu/navi10: add uclk activity sensor
  drm/amdgpu: properly guard the generic discovery code
  drm/amdgpu: add missing documentation on new module parameters
  drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
  drm/amd/display: avoid 64-bit division
  drm/amdgpu/psp11: simplify the ucode register logic
  drm/amdgpu: properly guard DC support in navi code
  drm/amd/powerplay: vega20: fix uninitialized variable use
  drm/amd/display: dcn20: include linux/delay.h
  amdgpu: make pmu support optional
  drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
  drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
  drm/amd/powerplay: Use memset to initialize metrics structs
  drm/amdgpu/mes10.1: Fix header guard
  drm/amd/powerplay: add temperature sensor support for navi10
  drm/amdgpu: fix scheduler timeout calc
  drm/amdgpu: Prepare for hmm_range_register API change (v2)
  ...

This reverts commit 031e610a, reversing
changes made to 52d2d44e.

The mm changes in there we premature and not fully ack or reviewed by core mm folks,
I dropped the ball by merging them via this tree, so lets take em all back out.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit 6dfc43d3.

Going to revert the whole vmwwgfx pull.
Signed-off-by: Dave Airlie <airlied@redhat.com>

mm/pgtable: drop pgtable_t variable from pte_fn_t functions
drops the token came in via the hmm tree, this caused lots of
conflicts, but applying this cleanup patch should reduce it
to something easier to handle. Just accept the token is unused
at this point.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull HMM updates from Jason Gunthorpe:
 "Improvements and bug fixes for the hmm interface in the kernel:

   - Improve clarity, locking and APIs related to the 'hmm mirror'
     feature merged last cycle. In linux-next we now see AMDGPU and
     nouveau to be using this API.

   - Remove old or transitional hmm APIs. These are hold overs from the
     past with no users, or APIs that existed only to manage cross tree
     conflicts. There are still a few more of these cleanups that didn't
     make the merge window cut off.

   - Improve some core mm APIs:
       - export alloc_pages_vma() for driver use
       - refactor into devm_request_free_mem_region() to manage
         DEVICE_PRIVATE resource reservations
       - refactor duplicative driver code into the core dev_pagemap
         struct

   - Remove hmm wrappers of improved core mm APIs, instead have drivers
     use the simplified API directly

   - Remove DEVICE_PUBLIC

   - Simplify the kconfig flow for the hmm users and core code"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits)
  mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR
  mm: remove the HMM config option
  mm: sort out the DEVICE_PRIVATE Kconfig mess
  mm: simplify ZONE_DEVICE page private data
  mm: remove hmm_devmem_add
  mm: remove hmm_vma_alloc_locked_page
  nouveau: use devm_memremap_pages directly
  nouveau: use alloc_page_vma directly
  PCI/P2PDMA: use the dev_pagemap internal refcount
  device-dax: use the dev_pagemap internal refcount
  memremap: provide an optional internal refcount in struct dev_pagemap
  memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag
  memremap: remove the data field in struct dev_pagemap
  memremap: add a migrate_to_ram method to struct dev_pagemap_ops
  memremap: lift the devmap_enable manipulation into devm_memremap_pages
  memremap: pass a struct dev_pagemap to ->kill and ->cleanup
  memremap: move dev_pagemap callbacks into a separate structure
  memremap: validate the pagemap type passed to devm_memremap_pages
  mm: factor out a devm_request_free_mem_region helper
  mm: export alloc_pages_vma
  ...

Merge tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs updates from Tyler Hicks:

 - Fix error handling when ecryptfs_read_lower() encounters an error

 - Fix read-only file creation when the eCryptfs mount is configured to
   store metadata in xattrs

 - Minor code cleanups

* tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  ecryptfs: Change return type of ecryptfs_process_flags
  ecryptfs: Make ecryptfs_xattr_handler static
  ecryptfs: remove unnessesary null check in ecryptfs_keyring_auth_tok_for_sig
  ecryptfs: use print_hex_dump_bytes for hexdump
  eCryptfs: fix permission denied with ecryptfs_xattr mount option when create readonly file
  ecryptfs: re-order a condition for static checkers
  eCryptfs: fix a couple type promotion bugs

Pull UBIFS updates from Richard Weinberger:

 - Support for zstd compression

 - Support for offline signed filesystems

 - Various fixes for regressions

* tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Don't leak orphans on memory during commit
  ubifs: Check link count of inodes when killing orphans.
  ubifs: Add support for zstd compression.
  ubifs: support offline signed images
  ubifs: remove unnecessary check in ubifs_log_start_commit
  ubifs: Fix typo of output in get_cs_sqnum
  ubifs: Simplify redundant code
  ubifs: Correctly use tnc_next() in search_dh_cookie()

Pull UML updates from Richard Weinberger:

 - A new timer mode, time travel, for testing with UML

 - Many bugixes/improvements for the serial line driver

 - Various bugfixes

* tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT
  um: Fix kcov crash during startup
  um: configs: Remove useless UEVENT_HELPER_PATH
  um: Support time travel mode
  um: Pass nsecs to os timer functions
  um: Remove drivers/ssl.h
  um: Don't garbage collect in deactivate_all_fds()
  um: Silence lockdep complaint about mmap_sem
  um: Remove locking in deactivate_all_fds()
  um: Timer code cleanup
  um: fix os_timer_one_shot()
  um: Fix IRQ controller regression on console read

Pull stream_open() updates from Kirill Smelkov:
 "This time on stream_open front it is only two small changes:

   - the first one converts stream_open.cocci to treat all functions
     that start with wait_.* as blocking. Previously it was only
     wait_event_.* functions that were considered as blocking, but this
     was falsely reporting several deadlock cases as only warning.

     This was picked by linux-kbuild and entered mainline as commit
     0c4ab18f ("coccinelle: api/stream_open: treat all wait_.*()
     calls as blocking"), and already merged earlier.

   - the second one teaches stream_open.cocci to consider files as being
     stream-like even if they use noop_llseek. It results in two more
     drivers being converted to stream_open() (mousedev.c and
     hid-sensor-custom.c)"

* tag 'stream_open-5.3' of https://lab.nexedi.com/kirr/linux:
  *: convert stream-like files -> stream_open, even if they use noop_llseek

Pull x86 platform driver updates from Andy Shevchenko:
 "Gathered a bunch of x86 platform driver changes. It's rather big,
  since includes two big refactors and completely new driver:

   - ASUS WMI driver got a big refactoring in order to support the TUF
     Gaming laptops. Besides that, the regression with backlight being
     permanently off on various EeePC laptops has been fixed.

   - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
     X axis being inverted. This has been fixed.

   - Intel PMC core driver has been extended to be ACPI enumerated if
     the DSDT provides device with _HID "INT33A1". This allows to
     convert the driver to be pure platform and support new hardware
     purely based on ACPI DSDT.

   - From now on the Intel Speed Select Technology is supported thru a
     corresponding driver. This driver provides an access to the
     features of the ISST, such as Performance Profile, Core Power, Base
     frequency and Turbo Frequency.

   - Mellanox platform drivers has been refactored and now extended to
     support more systems, including new coming ones.

   - The OLPC XO-1.75 platform is now supported.

   - CB4063 Beckhoff Automation board is using PMC clocks, provided via
     pmc_atom driver, for ethernet controllers in a way that they can't
     be managed by the clock driver. The quirk has been extended to
     cover this case.

   - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
     the information of Chuwi Hi10 Air has been fixed to cover more
     models based on the same platform.

   - Xiaomi notebooks have WMI interface enabled. Thus, the driver to
     support it has been provided. It required some extension of the
     generic WMI library, which allows to propagate opaque context to
     the ->probe() of the individual drivers.

  This release includes debugfs clean up from Greg KH for several
  drivers that drop return code check and make debugfs absence or
  failure non-fatal.

  Also miscellaneous fixes here and there, mostly for Acer WMI and
  various Intel drivers"

* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: Fix PCENGINES_APU2 Kconfig warning
  tools/power/x86/intel-speed-select: Add .gitignore file
  platform/x86: mlx-platform: Fix error handling in mlxplat_init()
  platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
  platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
  platform/x86: asus-wmi: Use dev_get_drvdata()
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Add more reset cause attributes
  platform/x86: mlx-platform: Modify DMI matching order
  platform/x86: mlx-platform: Add regmap structure for the next generation systems
  platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
  platform/x86: mlx-platform: Move regmap initialization before all drivers activation
  MAINTAINERS: Update for Intel Speed Select Technology
  tools/power/x86: A tool to validate Intel Speed Select commands
  platform/x86: ISST: Restore state on resume
  platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
  platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
  platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
  platform/x86: ISST: Add Intel Speed Select mmio interface
  platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  ...

Pull mailbox updates from Jassi Brar:

 - stm32: race fix by adding a spinlock

 - mhu: trim included headers

 - omap: add support for K3 SoCs

 - imx: Irq disable fix

 - bcm: tidy up extracting driver data

 - tegra: make resume 'noirq'

 - api: fix error handling

* tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: handle failed named mailbox channel request
  mailbox: tegra: avoid resume NULL mailboxes
  mailbox: tegra: hsp: add noirq resume
  mailbox: bcm-flexrm-mailbox: using dev_get_drvdata directly
  mailbox: imx: Clear GIEn bit at shutdown
  mailbox: omap: Add support for TI K3 SoCs
  dt-bindings: mailbox: omap: Update bindings for TI K3 SoCs
  mailbox: arm_mhu: reorder header inclusion and drop unneeded ones
  mailbox: stm32_ipcc: add spinlock to fix channels concurrent access

Pull percpu updates from Dennis Zhou:
 "This includes changes to let percpu_ref release the backing percpu
  memory earlier after it has been switched to atomic in cases where the
  percpu ref is not revived.

  This will help recycle percpu memory earlier in cases where the
  refcounts are pinned for prolonged periods of time"

* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu_ref: release percpu memory early without PERCPU_REF_ALLOW_REINIT
  md: initialize percpu refcounters using PERCU_REF_ALLOW_REINIT
  io_uring: initialize percpu refcounters using PERCU_REF_ALLOW_REINIT
  percpu_ref: introduce PERCPU_REF_ALLOW_REINIT flag

Pull perf fixes from Ingo Molnar:
 "A number of PMU driver corner case fixes, a race fix, an event
  grouping fix, plus a bunch of tooling fixes/updates"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  perf/x86/intel: Fix spurious NMI on fixed counter
  perf/core: Fix exclusive events' grouping
  perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs
  perf/x86/amd/uncore: Do not set 'ThreadMask' and 'SliceMask' for non-L3 PMCs
  perf/core: Fix race between close() and fork()
  perf intel-pt: Fix potential NULL pointer dereference found by the smatch tool
  perf intel-bts: Fix potential NULL pointer dereference found by the smatch tool
  perf script: Assume native_arch for pipe mode
  perf scripts python: export-to-sqlite.py: Fix DROP VIEW power_events_view
  perf scripts python: export-to-postgresql.py: Fix DROP VIEW power_events_view
  perf hists browser: Fix potential NULL pointer dereference found by the smatch tool
  perf cs-etm: Fix potential NULL pointer dereference found by the smatch tool
  perf parse-events: Remove unused variable: error
  perf parse-events: Remove unused variable 'i'
  perf metricgroup: Add missing list_del_init() when flushing egroups list
  perf tools: Use list_del_init() more thorougly
  perf tools: Use zfree() where applicable
  tools lib: Adopt zalloc()/zfree() from tools/perf
  perf tools: Move get_current_dir_name() cond prototype out of util.h
  perf namespaces: Move the conditional setns() prototype to namespaces.h
  ...

Pull locking fix from Ingo Molnar:
 "A single fix for a locking statistics bug"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix lock used or unused stats error

Pull x86 fix from Ingo Molnar:
 "A single build system bugfix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Fix flip/flop vdso build bug

Pull scheduler fix from Ingo Molnar:
 "Fix a sched statistics related bug that would trigger a kernel warning
  on certain configs"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix preempt warning in ttwu

This patch continues 10dce8af (fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock) and c5bf68fe (*: convert stream-like files from
nonseekable_open -> stream_open) and teaches steam_open.cocci to
consider files as being stream-like not only if they have
.llseek=no_llseek, but also if they have .llseek=noop_llseek.

This is safe to do: the comment about noop_llseek says

	This is an implementation of ->llseek useable for the rare special case when
	userspace expects the seek to succeed but the (device) file is actually not
	able to perform the seek. In this case you use noop_llseek() instead of
	falling back to the default implementation of ->llseek.

and in general noop_llseek was massively added to drivers in 6038f373
(llseek: automatically add .llseek fop) when changing default for NULL .llseek
from NOP to no_llseek with the idea to avoid breaking compatibility, if
maybe some user-space program was using lseek on a device without caring
about the result, but caring if it was an error or not.

Amended semantic patch produces two changes when applied tree-wide:

        drivers/hid/hid-sensor-custom.c:690:8-24: WARNING: hid_sensor_custom_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
        drivers/input/mousedev.c:564:1-17: ERROR: mousedev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.

Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jan Blunck <jblunck@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
     as well as some other functions only used by drivers that haven't
     (yet?) made it upstream.

   - A fix for a bug in our handling of hardware watchpoints (eg. perf
     record -e mem: ...) which could lead to register corruption and
     kernel crashes.

   - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
     vmalloc when using the Radix MMU.

   - A large but incremental rewrite of our exception handling code to
     use gas macros rather than multiple levels of nested CPP macros.

  And the usual small fixes, cleanups and improvements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
  Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
  Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
  Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
  Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
  Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
  Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
  Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
  Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
  Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
  Jitindar Singh, Thiago Jung Bauermann, YueHaibing"

* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
  powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
  powerpc/eeh: Handle hugepages in ioremap space
  ocxl: Update for AFU descriptor template version 1.1
  powerpc/boot: pass CONFIG options in a simpler and more robust way
  powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
  powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
  powerpc/module64: Use symbolic instructions names.
  powerpc/module32: Use symbolic instructions names.
  powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
  powerpc/module64: Fix comment in R_PPC64_ENTRY handling
  powerpc/boot: Add lzo support for uImage
  powerpc/boot: Add lzma support for uImage
  powerpc/boot: don't force gzipped uImage
  powerpc/8xx: Add microcode patch to move SMC parameter RAM.
  powerpc/8xx: Use IO accessors in microcode programming.
  powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
  powerpc/8xx: refactor programming of microcode CPM params.
  powerpc/8xx: refactor printing of microcode patch name.
  powerpc/8xx: Refactor microcode write
  powerpc/8xx: refactor writing of CPM microcode arrays
  ...

Pull sparc updates from David Miller:
 "Just a few small changes:

   - Fix console naming inconsistency with hypervisor consoles, from
     John Paul Adrian Glaubitz

   - Fix userland compilation due to use of u_int, from Masahiro Yamada"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Add missing newline at end of file
  sparc: fix unknown type name u_int in uapi header
  sparc: configs: Remove useless UEVENT_HELPER_PATH
  sparc: Remove redundant copy of the LGPL-2.0
  sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

Pull networking fixes from David Miller:

 1) Fix excessive stack usage in cxgb4, from Arnd Bergmann.

 2) Missing skb queue lock init in tipc, from Chris Packham.

 3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet.

 4) Elide flow dissection of local packets in FIB rules, from Petar
    Penkov.

 5) Fix TLS support build failure in mlx5, from Tariq Toukab.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"
  net: dsa: qca8k: replace legacy gpio include
  net: hisilicon: Use devm_platform_ioremap_resource
  cxgb4: reduce kernel stack usage in cudbg_collect_mem_region()
  tipc: ensure head->lock is initialised
  tc-tests: updated skbedit tests
  nfp: flower: ensure ip protocol is specified for L4 matches
  nfp: flower: fix ethernet check on match fields
  net/mlx5e: Provide cb_list pointer when setting up tc block on rep
  net: phy: make exported variables non-static
  net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd()
  davinci_cpdma: don't cast dma_addr_t to pointer
  net: openvswitch: do not update max_headroom if new headroom is equal to old headroom
  net/mlx5e: Convert single case statement switch statements into if statements
  net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage
  net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off
  net/mlx5e: Fix compilation error in TLS code
  ipv6: fix static key imbalance in fl_create()
  ipv6: fix potential crash in ip6_datagram_dst_update()
  ipv6: tcp: fix flowlabels reflection for RST packets
  ...

Pull IDE update from David Miller:
 "Small cleanup"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: use BIT() macro for defining bit-flags

Pull MTD updates from Miquel Raynal:
 "This contains the following changes for MTD:

  MTD core changes:
   - New Hyperbus framework
   - New _is_locked (concat) implementation
   - Various cleanups

  NAND core changes:
   - use longest matching pattern in ->exec_op() default parser
   - export NAND operation tracer
   - add flag to indicate panic_write in MTD
   - use kzalloc() instead of kmalloc() and memset()

  Raw NAND controller drivers changes:
   - brcmnand:
       - fix BCH ECC layout for large page NAND parts
       - fallback to detected ecc-strength, ecc-step-size
       - when oops in progress use pio and interrupt polling
       - code refactor code to introduce helper functions
       - add support for v7.3 controller
   - FSMC:
       - use nand_op_trace for operation tracing
   - GPMI:
       - move all driver code into single file
       - various cleanups (including dmaengine changes)
       - use runtime PM to manage clocks
       - implement exec_op
   - MTK:
       - correct low level time calculation of r/w cycle
       - improve data sampling timing for read cycle
       - add validity check for CE# pin setting
       - fix wrongly assigned OOB buffer pointer issue
       - re-license MTK NAND driver as Dual MIT/GPL
   - STM32:
       - manage the get_irq error case
       - increase DMA completion timeouts

  Raw NAND chips drivers changes:
   - Macronix: add read-retry support

  Onenand driver changes:
   - add support for 8Gb datasize chips
   - avoid fall-through warnings

  SPI-NAND changes:
   - define macros for page-read ops with three-byte addresses
   - add support for two-byte device IDs and then for GigaDevice
     GD5F1GQ4UFxxG
   - add initial support for Paragon PN26G0xA
   - handle the case where the last page read has bitflips

  SPI-NOR core changes:
   - add support for the mt25ql02g and w25q16jv flashes
   - print error in case of jedec read id fails
   - is25lp256: add post BFPT fix to correct the addr_width

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
   - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
   - cadence-quadspi: add reset control"

* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
  mtd: concat: implement _is_locked mtd operation
  mtd: concat: refactor concat_lock/concat_unlock
  mtd: abi: do not use C++ style comments in uapi header
  mtd: afs: remove unneeded NULL check
  mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
  mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
  mtd: hyperbus: Add driver for TI's HyperBus memory controller
  mtd: spinand: read returns badly if the last page has bitflips
  mtd: spinand: Add initial support for Paragon PN26G0xA
  mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
  mtd: rawnand: gpmi: remove double assignment to block_size
  dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
  mtd: rawnand: brcmnand: Add support for v7.3 controller
  mtd: rawnand: brcmnand: Refactored code to introduce helper functions
  mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
  mtd: Add flag to indicate panic_write
  mtd: rawnand: Add Macronix NAND read retry support
  mtd: onenand: Avoid fall-through warnings
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
  mtd: spinand: Add support for two-byte device IDs
  ...

Merge tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add encrypted byte-offset initialization vector (eboiv) to DM crypt.

 - Add optional discard features to DM snapshot which allow freeing
   space from a DM device whose free space was exhausted.

 - Various small improvements to use struct_size() and kzalloc().

 - Fix to check if DM thin metadata is in fail_io mode before attempting
   to update the superblock to set the needs_check flag. Otherwise the
   DM thin-pool can hang.

 - Fix DM bufio shrinker's potential for ABBA recursion deadlock with DM
   thin provisioning on loop usecase.

* tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm bufio: fix deadlock with loop device
  dm snapshot: add optional discard support features
  dm crypt: implement eboiv - encrypted byte-offset initialization vector
  dm crypt: remove obsolete comment about plumb IV
  dm crypt: wipe private IV struct after key invalid flag is set
  dm integrity: use kzalloc() instead of kmalloc() + memset()
  dm: update stale comment in end_clone_bio()
  dm log writes: fix incorrect comment about the logged sequence example
  dm log writes: use struct_size() to calculate size of pending_block
  dm crypt: use struct_size() when allocating encryption context
  dm integrity: always set version on superblock update
  dm thin metadata: check if in fail_io mode when setting needs_check