- 02 Dec, 2014 7 commits
-
-
Liad Kaufman authored
Sometimes there is a need to configure some registers for setting some FW properties, such as the FW monitor mode (internal/external). This patch supports setting this for PCIe mode. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Liad Kaufman authored
Send all debug-configuration HCMDs that are set in the TLVs to the FW. This may include HCMDs to configure the FW monitor and FW log level, for example. Signed-off-by:
-
Liad Kaufman authored
Debug information can be appended to the firmware file. This information will be used by the driver to enable / disable debugging features in the firmware. Signed-off-by:
-
Emmanuel Grumbach authored
Interoperability issues were identified and root caused to the Smart Fifo watermarks. These issues arose with NetGear R7000. Fix this. Cc: <stable@vger.kernel.org> [3.14+] Fixes: 1f3b0ff8 ("iwlwifi: mvm: Add Smart FIFO support") Reviewed-by:
-
Emmanuel Grumbach authored
Since the commit below, iwldvm sends the FLUSH command to the firmware. All the devices that use iwldvm have a firmware that expects the _v3 version of this command, besides 5150. 5150's latest available firmware still expects a _v2 version of the FLUSH command. This means that since the commit below, we had a mismatch for this specific device only. This mismatch led to the NMI below: Loaded firmware version: 8.24.2.2 Start IWL Error Log Dump: Status: 0x0000004C, count: 5 0x00000004 | NMI_INTERRUPT_WDG 0x000006F4 | uPc 0x000005BA | branchlink1 0x000006F8 | branchlink2 0x000008C2 | interruptlink1 0x00005B02 | interruptlink2 0x00000002 | data1 0x07030000 | data2 0x00000068 | line 0x3E80510C | beacon time 0x728A0EF4 | tsf low 0x0000002A | tsf hi 0x00000000 | time gp1 0x01BDC977 | time gp2 0x00000000 | time gp3 0x00010818 | uCode version 0x00000000 | hw version 0x00484704 | board version 0x00000002 | hcmd 0x2FF23080 | isr0 0x0103E000 | isr1 0x0000001A | isr2 0x1443FCC3 | isr3 0x11800112 | isr4 0x00000068 | isr_pref 0x000000D4 | wait_event 0x00000000 | l2p_control 0x00000007 | l2p_duration 0x00103040 | l2p_mhvalid 0x00000007 | l2p_addr_match 0x00000000 | lmpm_pmg_sel 0x00000000 | timestamp 0x00000200 | flow_handler This was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=88961 Cc: <stable@vger.kernel.org> Fixes: a0855054 ("iwlwifi: dvm: drop non VO frames when flushing") Signed-off-by:
-
Liad Kaufman authored
In 8000 B-step the FW file has changed, but by the time we know the HW step, the FW file is already requested. This patch defaults 8000 family to B-step if no HW step is detected in time. When it can it checks what HW step it really is (in 8000 family) and if it isn't B-step, the FW file is released and the A-step file is requested. Signed-off-by:
-
Oren Givon authored
Fix the 4165 series name that was called 4265 by mistake. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
- 01 Dec, 2014 17 commits
-
-
Liad Kaufman authored
Adds all FH registers between FH_MEM_UPPER_BOUND and FH_MEM_LOWER_BOUND (which should be readable to the driver) to the dump data when it is collected. Signed-off-by:
-
Eran Harary authored
The ucode load flow changed for B0 hardware step. Change the code accordingly. Signed-off-by:
Eran Harary <eran.harary@intel.com> Signed-off-by:
-
David Spinadel authored
Signed-off-by:
David Spinadel <david.spinadel@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
Not doing so would allow other possible users of the device to take ownership and prevent normal WiFi operation. This fixes the second part of: https://bugzilla.kernel.org/show_bug.cgi?id=87191Reviewed-by:
Moshe Harel <moshe.harel@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
7265D are new devices that should always have a new NVM (at least 0x0c11). The firmware has issues with older versions of the NVM which are not and will not be available to the common mortals. Reviewed-by:
-
Idan Kahlon authored
Handle NVM file header. When NVM header detected, skip the header and reading only the sections data. Signed-off-by:
Idan Kahlon <idanx.kahlon@intel.com> Reviewed-by:
-
Luciano Coelho authored
Add the channels on which there was a match for every match reported by the firmware. The firmware reports the channels as indices to the array of channels that was passed in the scheduled scan request, so we need to save the array when entering D3 to make sure it is available when we resume. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Reviewed-by:
-
Luciano Coelho authored
Add SSID information to the net-detect indication to userspace. Fetch the matched profiles from the firmware in order to find the correct SSIDs in the profiles that matched. Since the net-detect information is stored in cfg80211, and in theory it could change while we are waking up and reading the matched profiles, we need to save it when we enter D3 so it is available during resume. Signed-off-by:
-
Eliad Peller authored
A following patche will use trans_pcie->cmd_in_flight for reference accounting as well. get ready for it. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Reviewed-by:
-
Eliad Peller authored
IWL_MVM_REF_PROTECT_CSA is missing from the ref strings used by debugfs. Signed-off-by:
-
Emmanuel Grumbach authored
This impacts the partition between BT and Wifi. Signed-off-by: -
Emmanuel Grumbach authored
All the supported firmwares have this TLV flag set. Reviewed-by:
-
Emmanuel Grumbach authored
All the supported firmwares have this TLV flag set. Reviewed-by:
-
Emmanuel Grumbach authored
This TLV flag is set for all the supported firmwares. Signed-off-by: -
Emmanuel Grumbach authored
This firmware is not supported anymore. Stop loading this firmware - and remove the code that handled older versions. Reviewed-by:
-
Luciano Coelho authored
Query the firmware for scan offload matches when waking up in order to report net detect as the reason for the wake up. This requires a new command API to be implemented. Additionally, remove some net detect command entries that are not valid anymore. Signed-off-by:
-
Johannes Berg authored
The firmware file-format is described in iwl-fw-file.h, while the internal handling structures and functions are in iwl-fw.h. Fix the separation between the files by moving file format definitions to iwl-fw-file.h. Also add a missing description for a kernel-doc member, and it's not needed to include iwl-fw-file.h again from the code (thanks to Liad Kaufman). Signed-off-by:
-
- 25 Nov, 2014 1 commit
-
-
Emmanuel Grumbach authored
Signed-off-by:
-
- 24 Nov, 2014 15 commits
-
-
Emmanuel Grumbach authored
Also update the timeout for the data verification. Signed-off-by: -
Oren Givon authored
Add a new SDIO card id intended for the new 4165 series. Signed-off-by:
-
Eliad Peller authored
Signed-off-by:
-
Arik Nemtsov authored
In case of channel switch, we need to teardown the TDLS peers. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
-
Eyal Shapira authored
The driver knows whether an rx frame was beamformed and marks it in the radiotap VHT flags. However it should also declare that it knows to extract this info otherwise this gets discarded by sniffers like Wireshark. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by:
-
Chaya Rachel Ivgy authored
Add support to MFUART loading notification (print notification data with IWL_DEBUG_INFO) Signed-off-by:
Chaya Rachel Ivgy <chaya.rachel.ivgi@intel.com> Reviewed-by:
-
Eliad Peller authored
call the appropriate iwl_trans_suspend/resume ops on iwl_mvm_suspend/resume calls. Signed-off-by:
-
Eliad Peller authored
Add suspend/resume trans ops that will be called from mac80211's suspend/resume ops. Signed-off-by:
-
Luciano Coelho authored
When the device wakes up due to netdetect, we need to query different things from the firmware than when it wakes up with a normal WoWLAN. To make this easier, separate the netdetect wake up handling from the rest. For now, we don't send netdetect as a wake up reason, treating it as a non-wireless wake up. Signed-off-by:
-
Luciano Coelho authored
Refactor the iwl_mvm_query_wakeup_reasons() function to split the part that gets the firmware status from the part that sets up the WoWLAN status. This will allow netdetect to reuse the code. Signed-off-by:
-
Luciano Coelho authored
We need to send a WOWLAN_CONFIGURATION command also for netdetect and configure the rfkill release trigger if needed. To do so, refactor the code that configures wowlan and netdetect when suspending and send the WOWLAN_CONFIGURATION command also for net_detect. Signed-off-by:
-
Luciano Coelho authored
Add the net detect WoWLAN flag to indicate support and use the nd_config from the WoWLAN configuration to start net detect, if it is set. The WoWLAN configuration takes precedence over the debugfs configuration. Signed-off-by:
-
Luciano Coelho authored
When another vif is also running during a channel switch, we need to use a session protection when we move to the new channel, so that we don't miss the beacons. Without this, sometimes the other vif repeatedly gets time exactly when we should be hearing the beacons, preventing channel switch from completing. Adding a session protection that lasts from the moment the channel changes until 2 TBTTs later, ensures that we will hear the beacons on the destination channel. Signed-off-by: -
Luciano Coelho authored
If setting the CSA time event fails, we must clear the TE data, otherwise we'll try to remove it when, for instance, a disconnection occurs, causing a SYSASSERT. Signed-off-by: -
Luciano Coelho authored
After a channel switch, transmission on the new channel is only started once we see a beacon on it. Thus, beacon filtering needs to be disabled during channel switch so that mac80211 receives this beacon and finishes the process. Signed-off-by:
-
