- 01 Oct, 2014 2 commits
-
-
Feng Kan authored
Add a generic SYSCON register mapped reset mechanism. Signed-off-by:
Feng Kan <fkan@apm.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Puthikorn Voravootivat authored
This patch fix the following issues. - Flag for bq27742 is 2 bytes contracy to 1 byte for older hardware - Don't read FLAG_CI as bq27742 does not have it - Use Battery full capacity register as last measure discharge Signed-off-by:
Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
- 26 Sep, 2014 14 commits
-
-
Pramod Gurav authored
This change replaces use of arm_pm_restart with recently introduced reset mechanism in Linux kernel called restart_notifier. Choosing priority 128, which is default priority, as according to documentation, this mechanism is sufficient to restart the entire system. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-pm@vger.kernel.org Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
David Riley authored
This driver registers a restart handler to set a GPIO line high/low to reset a board based on devicetree bindings. Signed-off-by:
David Riley <davidriley@chromium.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Sebastian Reichel authored
Immutable branch with restart handler patches for v3.18
-
Lee Jones authored
Signed-off-by:
Christophe Kerello <christophe.kerello@st.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Lee Jones authored
This driver adds the restart functionality for STiH415 and STiH416 platforms from STMicroelectronics. This driver registers an arm_pm_restart function to reset the platform. Signed-off-by:
Christophe Kerello <christophe.kerello@st.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Krzysztof Kozlowski authored
NULL pointer exception happens during charger-manager probe if 'cm-fuel-gauge' property is not present. [ 2.448536] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 2.456572] pgd = c0004000 [ 2.459217] [00000000] *pgd=00000000 [ 2.462759] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 2.468047] Modules linked in: [ 2.471089] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc6-00251-ge44cf96cd525-dirty #969 [ 2.479765] task: ea890000 ti: ea87a000 task.ti: ea87a000 [ 2.485161] PC is at strcmp+0x4/0x30 [ 2.488719] LR is at power_supply_match_device_by_name+0x10/0x1c [ 2.494695] pc : [<c01f4220>] lr : [<c030fe38>] psr: a0000113 [ 2.494695] sp : ea87bde0 ip : 00000000 fp : eaa97010 [ 2.506150] r10: 00000004 r9 : ea97269c r8 : ea3bbfd0 [ 2.511360] r7 : eaa97000 r6 : c030fe28 r5 : 00000000 r4 : ea3b0000 [ 2.517869] r3 : 0000006d r2 : 00000000 r1 : 00000000 r0 : c057c195 [ 2.524381] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.531671] Control: 10c5387d Table: 4000404a DAC: 00000015 [ 2.537399] Process swapper/0 (pid: 1, stack limit = 0xea87a240) [ 2.543388] Stack: (0xea87bde0 to 0xea87c000) [ 2.547733] bde0: ea3b0210 c026b1c8 eaa97010 eaa97000 eaa97010 eabb60a8 ea3b0210 00000000 [ 2.555891] be00: 00000008 ea2db210 ea1a3410 c030fee0 ea3bbf90 c03138fc c068969c c013526c [ 2.564050] be20: eaa040c0 00000000 c068969c 00000000 eaa040c0 ea2da300 00000002 00000000 [ 2.572208] be40: 00000001 ea2da3c0 00000000 00000001 00000000 eaa97010 c068969c 00000000 [ 2.580367] be60: 00000000 c068969c 00000000 00000002 00000000 c026b71c c026b6f0 eaa97010 [ 2.588527] be80: c0e82530 c026a330 00000000 eaa97010 c068969c eaa97044 00000000 c061df50 [ 2.596686] bea0: ea87a000 c026a4dc 00000000 c068969c c026a448 c0268b5c ea8054a8 eaa8fd50 [ 2.604845] bec0: c068969c ea2db180 c06801f8 c0269b18 c0590f68 c068969c c0656c98 c068969c [ 2.613004] bee0: c0656c98 ea3bbe40 c06988c0 c026aaf0 00000000 c0656c98 c0656c98 c00088a4 [ 2.621163] bf00: 00000000 c0055f48 00000000 00000004 00000000 ea890000 c05dbc54 c062c178 [ 2.629323] bf20: c0603518 c005f674 00000001 ea87a000 eb7ff83b c0476440 00000091 c003d41c [ 2.637482] bf40: c05db344 00000007 eb7ff858 00000007 c065a76c c0647d24 00000007 c062c170 [ 2.645642] bf60: c06988c0 00000091 c062c178 c0603518 00000000 c0603cc4 00000007 00000007 [ 2.653801] bf80: c0603518 c0c0c0c0 00000000 c0453948 00000000 00000000 00000000 00000000 [ 2.661959] bfa0: 00000000 c0453950 00000000 c000e728 00000000 00000000 00000000 00000000 [ 2.670118] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.678277] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [ 2.686454] [<c01f4220>] (strcmp) from [<c030fe38>] (power_supply_match_device_by_name+0x10/0x1c) [ 2.695303] [<c030fe38>] (power_supply_match_device_by_name) from [<c026b1c8>] (class_find_device+0x54/0xac) [ 2.705106] [<c026b1c8>] (class_find_device) from [<c030fee0>] (power_supply_get_by_name+0x1c/0x30) [ 2.714137] [<c030fee0>] (power_supply_get_by_name) from [<c03138fc>] (charger_manager_probe+0x3d8/0xe58) [ 2.723683] [<c03138fc>] (charger_manager_probe) from [<c026b71c>] (platform_drv_probe+0x2c/0x5c) [ 2.732532] [<c026b71c>] (platform_drv_probe) from [<c026a330>] (driver_probe_device+0x10c/0x224) [ 2.741384] [<c026a330>] (driver_probe_device) from [<c026a4dc>] (__driver_attach+0x94/0x98) [ 2.749813] [<c026a4dc>] (__driver_attach) from [<c0268b5c>] (bus_for_each_dev+0x54/0x88) [ 2.757969] [<c0268b5c>] (bus_for_each_dev) from [<c0269b18>] (bus_add_driver+0xd4/0x1d0) [ 2.766123] [<c0269b18>] (bus_add_driver) from [<c026aaf0>] (driver_register+0x78/0xf4) [ 2.774110] [<c026aaf0>] (driver_register) from [<c00088a4>] (do_one_initcall+0x80/0x1bc) [ 2.782276] [<c00088a4>] (do_one_initcall) from [<c0603cc4>] (kernel_init_freeable+0x100/0x1cc) [ 2.790952] [<c0603cc4>] (kernel_init_freeable) from [<c0453950>] (kernel_init+0x8/0xec) [ 2.799029] [<c0453950>] (kernel_init) from [<c000e728>] (ret_from_fork+0x14/0x2c) [ 2.806572] Code: e12fff1e e1a03000 eafffff7 e4d03001 (e4d12001) [ 2.812832] ---[ end trace 7f12556111b9e7ef ]--- Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 856ee611 ("charger-manager: Support deivce tree in charger manager driver") Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Guenter Roeck authored
Implementing a restart handler in a module don't make sense as there would be no guarantee that the module is loaded when a restart is needed. Unexport arm_pm_restart to ensure that no one gets the idea to do it anyway. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
The kernel core now provides an API to trigger a system restart. Register with it instead of setting arm_pm_restart. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
The kernel core now provides an API to trigger a system restart. Register with it to restart the system instead of misusing the reboot notifier. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
The kernel now provides an API to trigger a system restart. Register with it instead of setting arm_pm_restart. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
The kernel core now supports a restart handler call chain for system restart functions. With this change, the arm_pm_restart callback is now optional, so drop its initialization and check if it is set before calling it. Only call the kernel restart handler if arm_pm_restart is not set. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
The kernel core now supports a restart handler call chain to restart the system. Call it if arm_pm_restart is not set. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
machine_restart is supported on non-ARM platforms, and and ultimately calls arm_pm_restart, so dont call arm_pm_restart directly but use the more generic function. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Guenter Roeck authored
Various drivers implement architecture and/or device specific means to restart (reset) the system. Various mechanisms have been implemented to support those schemes. The best known mechanism is arm_pm_restart, which is a function pointer to be set either from platform specific code or from drivers. Another mechanism is to use hardware watchdogs to issue a reset; this mechanism is used if there is no other method available to reset a board or system. Two examples are alim7101_wdt, which currently uses the reboot notifier to trigger a reset, and moxart_wdt, which registers the arm_pm_restart function. The existing mechanisms have a number of drawbacks. Typically only one scheme to restart the system is supported (at least if arm_pm_restart is used). At least in theory there can be multiple means to restart the system, some of which may be less desirable (for example one mechanism may only reset the CPU, while another may reset the entire system). Using arm_pm_restart can also be racy if the function pointer is set from a driver, as the driver may be in the process of being unloaded when arm_pm_restart is called. Using the reboot notifier is always racy, as it is unknown if and when other functions using the reboot notifier have completed execution by the time the watchdog fires. Introduce a system restart handler call chain to solve the described problems. This call chain is expected to be executed from the architecture specific machine_restart() function. Drivers providing system restart functionality (such as the watchdog drivers mentioned above) are expected to register with this call chain. By using the priority field in the notifier block, callers can control restart handler execution sequence and thus ensure that the restart handler with the optimal restart capabilities for a given system is called first. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
- 25 Sep, 2014 1 commit
-
-
Krzysztof Kozlowski authored
Make the max14577 charger driver depending on SYSFS instead selecting it. This fixes warning on x86_64 with allmodconfig: scripts/kconfig/conf --allmodconfig Kconfig fs/sysfs/Kconfig:1:error: recursive dependency detected! fs/sysfs/Kconfig:1: symbol SYSFS is selected by CHARGER_MAX14577 drivers/power/Kconfig:327: symbol CHARGER_MAX14577 depends on POWER_SUPPLY drivers/power/Kconfig:1: symbol POWER_SUPPLY is selected by HID_SONY drivers/hid/Kconfig:638: symbol HID_SONY depends on NEW_LEDS drivers/leds/Kconfig:8: symbol NEW_LEDS is selected by SENSORS_APPLESMC drivers/hwmon/Kconfig:299: symbol SENSORS_APPLESMC depends on HWMON drivers/hwmon/Kconfig:5: symbol HWMON is selected by EEEPC_LAPTOP drivers/platform/x86/Kconfig:496: symbol EEEPC_LAPTOP depends on HOTPLUG_PCI drivers/pci/hotplug/Kconfig:5: symbol HOTPLUG_PCI depends on SYSFS Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
- 24 Sep, 2014 13 commits
-
-
Sebastian Reichel authored
Immutable branch between MFD, Power, Charger and Regulator for v3.18
-
Heiko Stuebner authored
Some gpio implementations return interesting values for gpio_get_value when the value is not 0 - as seen on a imx6sl board. Therefore do not use the value returned from gpio_get_value directly but simply check for 0 or not 0. Signed-off-by:
Heiko Stuebner <heiko.stuebner@bq.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Tested-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Krzysztof Kozlowski authored
Use of_get_child_by_name to obtain reference to charger node instead of of_find_node_by_name which can walk outside of the parent node. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Krzysztof Kozlowski authored
Check the return value of devm_kzalloc() to fix possible NULL pointer dereference and properly exit the probe() on memory allocation failure. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Puthikorn Voravootivat authored
Add support to bq27742 in bq27x00 driver. bq27742 register addresses are mostly mostly the same as bq27500 addresses with minor differences. Signed-off-by:
Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Rhyland Klein <rklein@nvidia.com> Reviewed-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Krzysztof Kozlowski authored
Document the 'fast charge timer' setting exported by max14577 driver through sysfs entry. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Add document describing device tree bindings for MAX14577 MFD drivers: MFD core, extcon, regulator and charger. Both MAX14577 and MAX77836 chipsets are documented. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
MAX77836 has the same Fuel Gauge as MAX17040/17048. The max17040 driver can be safely re-used. The patch adds MAX77836 device to the array of i2c_device_id. Additionally it removes the id associated with MAX17040 device as the value is not used. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Remove hard-coded values for: - Fast Charge current, - End Of Charge current, - Fast Charge timer, - Overvoltage Protection Threshold, - Battery Constant Voltage, and use DTS or sysfs to configure them. This allows using the max14577 charger driver with different batteries. Now the charger driver requires valid configuration data from DTS. In case of wrong configuration data it fails during probe. The fast charge timer is configured through sysfs entry. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
This patch prepares for changing the max14577 charger driver to allow configuring battery-dependent settings from DTS. The patch moves from regulator driver to MFD core driver and exports: - function for calculating register value for charger's current; - table of limits for chargers (MAX14577, MAX77836). Previously they were used only by the max14577 regulator driver. In next patch the charger driver will use them as well. Exporting them will reduce unnecessary code duplication. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Mark Brown <broonie@linaro.org> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Add support for MAX77836 charger to the max14577 driver. The MAX77836 charger is almost the same as 14577 model except: - No dead-battery detection; - Support for special charger (like in MAX77693); - Support for DX over-voltage protection (like in MAX77693); - Lower values of charging current (two times lower current for slow/fast charge, much lower EOC current); - Slightly different values in ChgTyp field of STATUS2 register. On MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the 0x6 means special charger and 0x7 is reserved. Regardless of these differences the driver maps them to one enum max14577_muic_charger_type. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Add a "maxim,max14577-charger" of_compatible to the mfd_cell so the MFD child device (the charger) will have its own of_node set. This will be used by the max14577 charger driver in next patches to obtain battery configuration from DTS. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Prepare for adding support for MAX77836 charger to the max14577 charger driver by adding necessary new defines and prefixes to existing ones. The MAX77836 uses slightly different values for ChgTyp field of STATUS2 register. On the MAX14577 value of 0x6 is reserved and 0x7 dead battery. On the MAX77836 the opposite: - 0x6 means special charger, - 0x7 is reserved. Regardless of these differences use one common enum max14577_muic_charger_type. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Andrew Morton <akpm@linux-foundation.org>
-
- 16 Sep, 2014 10 commits
-
-
René Moll authored
LTC2952 is an external power control chip, which signals the OS to shut down. This patch documents the DT binding for the chip. Signed-off-by:
René Moll <rene.moll@xsens.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
René Moll authored
This adds a driver for the LTC2952, an external power control chip, which signals the OS to shut down. Additionally this driver lets the kernel power down the board. Signed-off-by:
René Moll <rene.moll@xsens.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
This piece of code was added so that we return -EPROBE_DEFER when no devices are registered. But even if class_for_each_device() returns 0, we are going to return -EPROBE_DEFER only. And so this code isn't required at all. Remove it. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
Using 'goto' statements for freeing resources on failures is a good choice as it makes code very clean, and reduces the chances of human errors. Though in most cases compiler may take care of this. But adding unnecessary 'goto' statements wouldn't make anything better. Code becomes less readable actually. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
In power_supply_show_property() routine, we call ->get_property() conditionally and should check for failure in that case only. There is no point comparing 'ret' for errors when 'ret' is surely zero. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
At multiple places we are doing exactly what PTR_ERR_OR_ZERO() does. And so that routine can be reused instead of increasing lines of code here. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
The 'if' statements in power_supply_changed_work() are mostly there for taking care of races and normally they will always evaluate to true. Optimize them for fast execution with 'likely' statements. Also there is need to have better comments in code to mention about the races clearly. Get them in place. Cc: Zoran Markovic <zrn.markovic@gmail.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
There is no need to check the value of ret.intval before returning it, as we will be returning zero explicitly when ret.intval is zero. So essentially we will end up returning value of ret.intval as it is. Drop the unnecessary 'if' statements. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
We need to stop 'class_for_each_device' loop when a supply matches with the of-node. In order to achieve this we currently return -EINVAL from __power_supply_populate_supplied_from() on successful match. class_for_each_device() is free to return similar errors in other cases as well and so the choice of return value here isn't particularly great. This commit isn't removing the Hack but making it more elegant by returning '1' instead. Also power_supply_find_supply_from_node() can return errors other than -EPROBE_DEFER now if class_for_each_device() fails. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Viresh Kumar authored
Callers of power_supply_find_supply_from_node(), i.e. power_supply_check_supplies(), must propagate the errors returned by it instead of returning their own. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-