- 05 Dec, 2019 40 commits
-
-
Andy Shevchenko authored
While PCA_PCAL is defined for PCA953X type only, we still may use an offset of the input from regs structure for sake of consistency. Link: http://lkml.kernel.org/r/20191022172922.61232-10-andriy.shevchenko@linux.intel.comSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Shevchenko authored
We always will have at least one iteration of the loop due to pending being guaranteed to be non-zero. That is, we may remove extra variable and check in the IRQ handler. Link: http://lkml.kernel.org/r/20191022172922.61232-9-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
In some drivers we want to have a single operation over bitmap which is an equivalent to: *dst = (*old & ~(*mask)) | (*new & *mask) Introduce bitmap_replace() helper for this. Link: http://lkml.kernel.org/r/20191022172922.61232-8-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
This test case file is about bitmap API, and not printf() facility. Link: http://lkml.kernel.org/r/20191022172922.61232-7-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Some test cases may re-use predefined exp1 and exp2 bitmaps. Move them upper in the file. Link: http://lkml.kernel.org/r/20191022172922.61232-6-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
One function is using exp as local variable. Avoid ambiguous naming by rename global one to exp1. Link: http://lkml.kernel.org/r/20191022172922.61232-5-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
EXP_BYTES has been wrongly named. It's a size of the exp array in bits. While here, go ahead and rename to EXP1_IN_BITS to avoid double renaming when exp will be renamed to exp1 in the next patch Link: http://lkml.kernel.org/r/20191022172922.61232-4-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
There is no need to keep step and ptest macros defined in entire file. Link: http://lkml.kernel.org/r/20191022172922.61232-3-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Patch series "gpio: pca953x: Convert to bitmap (extended) API", v2. While converting gpio-pca953x driver to bitmap API, I noticed that we have no function to replace bits. So, that's how patch 7 appears. First 6 patches are preparatory of the test suite (including some warning fixes, etc). Patches 8-9 are preparatory for the GPIO driver to be easier converted to bitmap API, conversion to which happens in patch 10. Patch 11 contains simple indentation fixes. This patch (of 11): Sparse complains: lib/test_bitmap.c:345:58: warning: incorrect type in argument 1 (different address spaces) lib/test_bitmap.c:345:58: expected char const [noderef] <asn:1> *ubuf lib/test_bitmap.c:345:58: got char const *const in Force argument of bitmap_parselist_user() to proper address space. Link: http://lkml.kernel.org/r/20191022172922.61232-2-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Masahiro Yamada authored
Userspace cannot compile <asm/sembuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/sembuf.h.s In file included from <command-line>:32:0: usr/include/asm/sembuf.h:17:20: error: field `sem_perm' has incomplete type struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ ^~~~~~~~ usr/include/asm/sembuf.h:24:2: error: unknown type name `__kernel_time_t' __kernel_time_t sem_otime; /* last semop time */ ^~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:25:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused1; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:26:2: error: unknown type name `__kernel_time_t' __kernel_time_t sem_ctime; /* last change time */ ^~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:27:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused2; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:29:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t sem_nsems; /* no. of semaphores in array */ ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:30:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused3; ^~~~~~~~~~~~~~~~ usr/include/asm/sembuf.h:31:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused4; ^~~~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <asm/ipcbuf.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-3-yamada.masahiro@socionext.comSigned-off-by:Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Masahiro Yamada authored
Userspace cannot compile <asm/msgbuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/msgbuf.h.s In file included from usr/include/asm/msgbuf.h:6:0, from <command-line>:32: usr/include/asm-generic/msgbuf.h:25:20: error: field `msg_perm' has incomplete type struct ipc64_perm msg_perm; ^~~~~~~~ usr/include/asm-generic/msgbuf.h:27:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_stime; /* last msgsnd time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:28:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_rtime; /* last msgrcv time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:29:2: error: unknown type name `__kernel_time_t' __kernel_time_t msg_ctime; /* last change time */ ^~~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:41:2: error: unknown type name `__kernel_pid_t' __kernel_pid_t msg_lspid; /* pid of last msgsnd */ ^~~~~~~~~~~~~~ usr/include/asm-generic/msgbuf.h:42:2: error: unknown type name `__kernel_pid_t' __kernel_pid_t msg_lrpid; /* last receive pid */ ^~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <asm/ipcbuf.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-2-yamada.masahiro@socionext.comSigned-off-by: -
Masahiro Yamada authored
Userspace cannot compile <asm/ipcbuf.h> due to some missing type definitions. For example, building it for x86 fails as follows: CC usr/include/asm/ipcbuf.h.s In file included from usr/include/asm/ipcbuf.h:1:0, from <command-line>:32: usr/include/asm-generic/ipcbuf.h:21:2: error: unknown type name `__kernel_key_t' __kernel_key_t key; ^~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:22:2: error: unknown type name `__kernel_uid32_t' __kernel_uid32_t uid; ^~~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:23:2: error: unknown type name `__kernel_gid32_t' __kernel_gid32_t gid; ^~~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:24:2: error: unknown type name `__kernel_uid32_t' __kernel_uid32_t cuid; ^~~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:25:2: error: unknown type name `__kernel_gid32_t' __kernel_gid32_t cgid; ^~~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:26:2: error: unknown type name `__kernel_mode_t' __kernel_mode_t mode; ^~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:28:35: error: `__kernel_mode_t' undeclared here (not in a function) unsigned char __pad1[4 - sizeof(__kernel_mode_t)]; ^~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:31:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused1; ^~~~~~~~~~~~~~~~ usr/include/asm-generic/ipcbuf.h:32:2: error: unknown type name `__kernel_ulong_t' __kernel_ulong_t __unused2; ^~~~~~~~~~~~~~~~ It is just a matter of missing include directive. Include <linux/posix_types.h> to make it self-contained, and add it to the compile-test coverage. Link: http://lkml.kernel.org/r/20191030063855.9989-1-yamada.masahiro@socionext.comSigned-off-by: -
Julien Grall authored
At the moment, UBSAN report will be serialized using a spin_lock(). On RT-systems, spinlocks are turned to rt_spin_lock and may sleep. This will result to the following splat if the undefined behavior is in a context that can sleep: BUG: sleeping function called from invalid context at /src/linux/kernel/locking/rtmutex.c:968 in_atomic(): 1, irqs_disabled(): 128, pid: 3447, name: make 1 lock held by make/3447: #0: 000000009a966332 (&mm->mmap_sem){++++}, at: do_page_fault+0x140/0x4f8 irq event stamp: 6284 hardirqs last enabled at (6283): [<ffff000011326520>] _raw_spin_unlock_irqrestore+0x90/0xa0 hardirqs last disabled at (6284): [<ffff0000113262b0>] _raw_spin_lock_irqsave+0x30/0x78 softirqs last enabled at (2430): [<ffff000010088ef8>] fpsimd_restore_current_state+0x60/0xe8 softirqs last disabled at (2427): [<ffff000010088ec0>] fpsimd_restore_current_state+0x28/0xe8 Preemption disabled at: [<ffff000011324a4c>] rt_mutex_futex_unlock+0x4c/0xb0 CPU: 3 PID: 3447 Comm: make Tainted: G W 5.2.14-rt7-01890-ge6e057589653 #911 Call trace: dump_backtrace+0x0/0x148 show_stack+0x14/0x20 dump_stack+0xbc/0x104 ___might_sleep+0x154/0x210 rt_spin_lock+0x68/0xa0 ubsan_prologue+0x30/0x68 handle_overflow+0x64/0xe0 __ubsan_handle_add_overflow+0x10/0x18 __lock_acquire+0x1c28/0x2a28 lock_acquire+0xf0/0x370 _raw_spin_lock_irqsave+0x58/0x78 rt_mutex_futex_unlock+0x4c/0xb0 rt_spin_unlock+0x28/0x70 get_page_from_freelist+0x428/0x2b60 __alloc_pages_nodemask+0x174/0x1708 alloc_pages_vma+0x1ac/0x238 __handle_mm_fault+0x4ac/0x10b0 handle_mm_fault+0x1d8/0x3b0 do_page_fault+0x1c8/0x4f8 do_translation_fault+0xb8/0xe0 do_mem_abort+0x3c/0x98 el0_da+0x20/0x24 The spin_lock() will protect against multiple CPUs to output a report together, I guess to prevent them from being interleaved. However, they can still interleave with other messages (and even splat from __might_sleep). So the lock usefulness seems pretty limited. Rather than trying to accomodate RT-system by switching to a raw_spin_lock(), the lock is now completely dropped. Link: http://lkml.kernel.org/r/20190920100835.14999-1-julien.grall@arm.comSigned-off-by:Julien Grall <julien.grall@arm.com> Reported-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Andrey Konovalov authored
Add kcov_remote_start()/kcov_remote_stop() annotations to the vhost_worker() function, which is responsible for processing vhost works. Since vhost_worker() threads are spawned per vhost device instance the common kcov handle is used for kcov_remote_start()/stop() annotations (see Documentation/dev-tools/kcov.rst for details). As the result kcov can now be used to collect coverage from vhost worker threads. Link: http://lkml.kernel.org/r/e49d5d154e5da6c9ada521d2b7ce10a49ce9f98b.1572366574.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Potapenko <glider@google.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Windsor <dwindsor@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Marco Elver <elver@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Andrey Konovalov authored
Add kcov_remote_start()/kcov_remote_stop() annotations to the hub_event() function, which is responsible for processing events on USB buses, in particular events that happen during USB device enumeration. Since hub_event() is run in a global background kernel thread (see Documentation/dev-tools/kcov.rst for details), each USB bus gets a unique global handle from the USB subsystem kcov handle range. As the result kcov can now be used to collect coverage from events that happen on a particular USB bus. [akpm@linux-foundation.org: avoid patch conflicts to make life easier for Andrew] Link: http://lkml.kernel.org/r/de4fe1c219db2d002d905dc1736e2a3bfa1db997.1572366574.git.andreyknvl@google.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Potapenko <glider@google.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Windsor <dwindsor@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marco Elver <elver@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Andrey Konovalov authored
Patch series " kcov: collect coverage from usb and vhost", v3. This patchset extends kcov to allow collecting coverage from backgound kernel threads. This extension requires custom annotations for each of the places where coverage collection is desired. This patchset implements this for hub events in the USB subsystem and for vhost workers. See the first patch description for details about the kcov extension. The other two patches apply this kcov extension to USB and vhost. Examples of other subsystems that might potentially benefit from this when custom annotations are added (the list is based on process_one_work() callers for bugs recently reported by syzbot): 1. fs: writeback wb_workfn() worker, 2. net: addrconf_dad_work()/addrconf_verify_work() workers, 3. net: neigh_periodic_work() worker, 4. net/p9: p9_write_work()/p9_read_work() workers, 5. block: blk_mq_run_work_fn() worker. These patches have been used to enable coverage-guided USB fuzzing with syzkaller for the last few years, see the details here: https://github.com/google/syzkaller/blob/master/docs/linux/external_fuzzing_usb.md This patchset has been pushed to the public Linux kernel Gerrit instance: https://linux-review.googlesource.com/c/linux/kernel/git/torvalds/linux/+/1524 This patch (of 3): Add background thread coverage collection ability to kcov. With KCOV_ENABLE coverage is collected only for syscalls that are issued from the current process. With KCOV_REMOTE_ENABLE it's possible to collect coverage for arbitrary parts of the kernel code, provided that those parts are annotated with kcov_remote_start()/kcov_remote_stop(). This allows to collect coverage from two types of kernel background threads: the global ones, that are spawned during kernel boot in a limited number of instances (e.g. one USB hub_event() worker thread is spawned per USB HCD); and the local ones, that are spawned when a user interacts with some kernel interface (e.g. vhost workers). To enable collecting coverage from a global background thread, a unique global handle must be assigned and passed to the corresponding kcov_remote_start() call. Then a userspace process can pass a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the kcov_remote_arg struct. This will attach the used kcov device to the code sections, that are referenced by those handles. Since there might be many local background threads spawned from different userspace processes, we can't use a single global handle per annotation. Instead, the userspace process passes a non-zero handle through the common_handle field of the kcov_remote_arg struct. This common handle gets saved to the kcov_handle field in the current task_struct and needs to be passed to the newly spawned threads via custom annotations. Those threads should in turn be annotated with kcov_remote_start()/kcov_remote_stop(). Internally kcov stores handles as u64 integers. The top byte of a handle is used to denote the id of a subsystem that this handle belongs to, and the lower 4 bytes are used to denote the id of a thread instance within that subsystem. A reserved value 0 is used as a subsystem id for common handles as they don't belong to a particular subsystem. The bytes 4-7 are currently reserved and must be zero. In the future the number of bytes used for the subsystem or handle ids might be increased. When a particular userspace process collects coverage by via a common handle, kcov will collect coverage for each code section that is annotated to use the common handle obtained as kcov_handle from the current task_struct. However non common handles allow to collect coverage selectively from different subsystems. Link: http://lkml.kernel.org/r/e90e315426a384207edbec1d6aa89e43008e4caf.1572366574.git.andreyknvl@google.comSigned-off-by:
-
Kees Cook authored
As we've done with VFS, string operations, etc, reject usercopy sizes larger than INT_MAX, which would be nice to have for catching bugs related to size calculation overflows[1]. This adds 10 bytes to x86_64 defconfig text and 1980 bytes to the data section: text data bss dec hex filename 19691167 5134320 1646664 26472151 193eed7 vmlinux.before 19691177 5136300 1646664 26474141 193f69d vmlinux.after [1] https://marc.info/?l=linux-s390&m=156631939010493&w=2 Link: http://lkml.kernel.org/r/201908251612.F9902D7A@keescookSigned-off-by:Kees Cook <keescook@chromium.org> Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Daniel Vetter authored
The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes") Code itself should have been fine as-is. Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.chSigned-off-by:Daniel Vetter <daniel.vetter@intel.com> Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes") Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ben Dooks (Codethink) authored
Include <linux/rio_drv.h> for the missing declarations of functions exported from this file. Fixes the following sparse warnings: drivers/rapidio/rio-access.c:59:1: warning: symbol '__rio_local_read_config_8' was not declared. Should it be static? drivers/rapidio/rio-access.c:60:1: warning: symbol '__rio_local_read_config_16' was not declared. Should it be static? drivers/rapidio/rio-access.c:61:1: warning: symbol '__rio_local_read_config_32' was not declared. Should it be static? drivers/rapidio/rio-access.c:62:1: warning: symbol '__rio_local_write_config_8' was not declared. Should it be static? drivers/rapidio/rio-access.c:63:1: warning: symbol '__rio_local_write_config_16' was not declared. Should it be static? drivers/rapidio/rio-access.c:64:1: warning: symbol '__rio_local_write_config_32' was not declared. Should it be static? drivers/rapidio/rio-access.c:112:1: warning: symbol 'rio_mport_read_config_8' was not declared. Should it be static? drivers/rapidio/rio-access.c:113:1: warning: symbol 'rio_mport_read_config_16' was not declared. Should it be static? drivers/rapidio/rio-access.c:114:1: warning: symbol 'rio_mport_read_config_32' was not declared. Should it be static? drivers/rapidio/rio-access.c:115:1: warning: symbol 'rio_mport_write_config_8' was not declared. Should it be static? drivers/rapidio/rio-access.c:116:1: warning: symbol 'rio_mport_write_config_16' was not declared. Should it be static? drivers/rapidio/rio-access.c:117:1: warning: symbol 'rio_mport_write_config_32' was not declared. Should it be static? drivers/rapidio/rio-access.c:136:5: warning: symbol 'rio_mport_send_doorbell' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191017115103.684-1-ben.dooks@codethink.co.ukSigned-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Signed-off-by:
-
Ben Dooks (Codethink) authored
Include <linux/rio_drv.h> for the missing declarations of functions exported from this file. Fixes the following sparse warnings: drivers/rapidio/rio-driver.c:53:16: warning: symbol 'rio_dev_get' was not declared. Should it be static? drivers/rapidio/rio-driver.c:70:6: warning: symbol 'rio_dev_put' was not declared. Should it be static? drivers/rapidio/rio-driver.c:150:5: warning: symbol 'rio_register_driver' was not declared. Should it be static? drivers/rapidio/rio-driver.c:169:6: warning: symbol 'rio_unregister_driver' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191017114923.10888-1-ben.dooks@codethink.co.ukSigned-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/1574306670-30234-1-git-send-email-krzk@kernel.orgSigned-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
ELF reads done by the kernel have very complicated error detection code which better live in one place. Link: http://lkml.kernel.org/r/20191005165215.GB26927@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Link: http://lkml.kernel.org/r/20191005165049.GA26927@avx2Signed-off-by:
-
Heiher authored
This adds the promised selftest for epoll. It will verify the wakeups of epoll. Including leaf and nested mode, epoll_wait() and poll() and multi-threads. Link: http://lkml.kernel.org/r/20191009121518.4027-1-r@hev.ccSigned-off-by:
hev <r@hev.cc> Reviewed-by:
Roman Penyaev <rpenyaev@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Heiher authored
Take the case where we have: t0 | (ew) e0 | (et) e1 | (lt) s0 t0: thread 0 e0: epoll fd 0 e1: epoll fd 1 s0: socket fd 0 ew: epoll_wait et: edge-trigger lt: level-trigger We remove unnecessary wakeups to prevent the nested epoll that working in edge- triggered mode to waking up continuously. Test code: #include <unistd.h> #include <sys/epoll.h> #include <sys/socket.h> int main(int argc, char *argv[]) { int sfd[2]; int efd[2]; struct epoll_event e; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sfd) < 0) goto out; efd[0] = epoll_create(1); if (efd[0] < 0) goto out; efd[1] = epoll_create(1); if (efd[1] < 0) goto out; e.events = EPOLLIN; if (epoll_ctl(efd[1], EPOLL_CTL_ADD, sfd[0], &e) < 0) goto out; e.events = EPOLLIN | EPOLLET; if (epoll_ctl(efd[0], EPOLL_CTL_ADD, efd[1], &e) < 0) goto out; if (write(sfd[1], "w", 1) != 1) goto out; if (epoll_wait(efd[0], &e, 1, 0) != 1) goto out; if (epoll_wait(efd[0], &e, 1, 0) != 0) goto out; close(efd[0]); close(efd[1]); close(sfd[0]); close(sfd[1]); return 0; out: return -1; } More tests: https://github.com/heiher/epoll-wakeup Link: http://lkml.kernel.org/r/20191009060516.3577-1-r@hev.ccSigned-off-by: -
Jason Baron authored
Currently, ep_poll_safewake() in the CONFIG_DEBUG_LOCK_ALLOC case uses ep_call_nested() in order to pass the correct subclass argument to spin_lock_irqsave_nested(). However, ep_call_nested() adds unnecessary checks for epoll depth and loops that are already verified when doing EPOLL_CTL_ADD. This mirrors a conversion that was done for !CONFIG_DEBUG_LOCK_ALLOC in: commit 37b5e521 ("epoll: remove ep_call_nested() from ep_eventpoll_poll()") Link: http://lkml.kernel.org/r/1567628549-11501-1-git-send-email-jbaron@akamai.comSigned-off-by:
Jason Baron <jbaron@akamai.com> Reviewed-by:
-
Joe Perches authored
The is_maintained_obsolete function can be called twice using the same filename. This function spawns a process using get_maintainer.pl. Store the status of each filename when spawned and use the stored result to eliminate the spawning of unnecessary duplicate child processes. Example: old: $ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null real 0m1.767s user 0m1.634s sys 0m0.141s new: $ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null real 0m1.184s user 0m1.085s sys 0m0.103s Link: http://lkml.kernel.org/r/b982566a2b9b4825badce36fdfc3032bd0005151.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Ignore all upper-case variants before and after SI units like mA, mV and uV so uses like RANGE_mA do not emit a CAMELCASE message. Link: http://lkml.kernel.org/r/5ce6f9131327fd2e12d7a0e20a55f588448de090.camel@perches.comSigned-off-by:
-
Huang Shijie authored
Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.aiSigned-off-by:
Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by:
-
Huang Shijie authored
We use addr_in_gen_pool() in a driver module. So export it. Link: http://lkml.kernel.org/r/20181224070622.22197-2-sjhuang@iluvatar.aiSigned-off-by:
-
Trent Piepho authored
In some cases the previous algorithm would not return the closest approximation. This would happen when a semi-convergent was the closest, as the previous algorithm would only consider convergents. As an example, consider an initial value of 5/4, and trying to find the closest approximation with a maximum of 4 for numerator and denominator. The previous algorithm would return 1/1 as the closest approximation, while this version will return the correct answer of 4/3. To do this, the main loop performs effectively the same operations as it did before. It must now keep track of the last three approximations, n2/d2 .. n0/d0, while before it only needed the last two. If an exact answer is not found, the algorithm will now calculate the best semi-convergent term, t, which is a single expression with two divisions: min((max_numerator - n0) / n1, (max_denominator - d0) / d1) This will be used if it is better than previous convergent. The test for this is generally a simple comparison, 2*t > a. But in an edge case, where the convergent's final term is even and the best allowable semi-convergent has a final term of exactly half the convergent's final term, the more complex comparison (d0*dp > d1*d) is used. I also wrote some comments explaining the code. While one still needs to look up the math elsewhere, they should help a lot to follow how the code relates to that math. This routine is used in two places in the video4linux code, but in those cases it is only used to reduce a fraction to lowest terms, which the existing code will do correctly. This could be done more efficiently with a different library routine but it would still be the Euclidean alogrithm at its heart. So no change. The remain users are places where a fractional PLL divider is programmed. What would happen is something asked for a clock of X MHz but instead gets Y MHz, where Y is close to X but not exactly due to the hardware limitations. After this change they might, in some cases, get Y' MHz, where Y' is a little closer to X then Y was. Users like this are: Three UARTs, in 8250_mid, 8250_lpss, and imx. One GPU in vp4_hdmi. And three clock drivers, clk-cdce706, clk-si5351, and clk-fractional-divider. The last is a generic clock driver and so would have more users referenced via device tree entries. I think there's a bug in that one, it's limiting an N bit field that is offset-by-1 to the range 0 .. (1<<N)-2, when it should be (1<<N)-1 as the upper limit. I have an IMX system, one of the UARTs using this, so I can provide a real example. If I request a custom baud rate of 1499978, the driver will program the PLL to produce a baud rate of 1500000. After this change, the fractional divider in the UART is programmed to a ratio of 65535/65536, which produces a baud rate of 1499977.0625. Closer to the requested value. Link: http://lkml.kernel.org/r/20190330205855.19396-1-tpiepho@gmail.comSigned-off-by:Trent Piepho <tpiepho@gmail.com> Cc: Oskar Schirmer <oskar@scara.com> Signed-off-by:
-
Laura Abbott authored
kmem_cache_alloc_bulk/kmem_cache_free_bulk are used to make multiple allocations of the same size to avoid the overhead of multiple kmalloc/kfree calls. Extend the kmem_cache tests to make some calls to these APIs. Link: http://lkml.kernel.org/r/20191107191447.23058-1-labbott@redhat.comSigned-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Sandeep Patil <sspatil@android.com> Cc: Jann Horn <jannh@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by:
-
Wei Yang authored
After move parent assignment out, we can check the color directly. Link: http://lkml.kernel.org/r/20191028021442.5450-2-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Wei Yang authored
Both in Case 2 and 3, we exchange n and s. This mean no matter whether child2 is NULL or not, successor's parent should be assigned to node's. This patch takes this step out to make it explicit and reduce the ambiguity. Besides, this step reduces some symbol size like rb_erase(). KERN_CONFIG upstream patched OPT_FOR_PERF 877 870 OPT_FOR_SIZE 635 621 Link: http://lkml.kernel.org/r/20191028021442.5450-1-richardw.yang@linux.intel.comSigned-off-by:
-
William Breathitt Gray authored
Replace verbose implementation in set_multiple callback with for_each_set_clump8 macro to simplify code and improve clarity. Link: http://lkml.kernel.org/r/3543ffc3668ad4ed4c00e8ebaf14a5559fd6ddf2.1570641097.git.vilhelm.gray@gmail.comSigned-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Tested-by:
-
William Breathitt Gray authored
Replace verbose implementation in get_multiple callback with for_each_set_clump8 macro to simplify code and improve clarity. Link: http://lkml.kernel.org/r/c2b1ed62caf6fce6e5681809a50c05ce6acdf2a6.1570641097.git.vilhelm.gray@gmail.comSigned-off-by:
-
William Breathitt Gray authored
Replace verbose implementation in get_multiple callback with for_each_set_clump8 macro to simplify code and improve clarity. Link: http://lkml.kernel.org/r/8a39ee772247d4b7d752b32dbacc06c1cdcb60b5.1570641097.git.vilhelm.gray@gmail.comSigned-off-by:
-
William Breathitt Gray authored
Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and bitmap_get_value8 functions, where appropriate. In addition, remove the now unnecessary temp_mask and temp_shift members of the intel_soc_dts_sensor_entry structure. Link: http://lkml.kernel.org/r/2d3c74e9a00a52954f31d19e04623a7f4bc85520.1570641097.git.vilhelm.gray@gmail.comSigned-off-by:
-
William Breathitt Gray authored
Replace verbose implementation in set_multiple callback with for_each_set_clump8 macro to simplify code and improve clarity. Link: http://lkml.kernel.org/r/7ea2df7182a50a1136ca36edc46dffcb2446fd27.1570641097.git.vilhelm.gray@gmail.comSigned-off-by:
-
William Breathitt Gray authored
Replace verbose implementation in set_multiple callback with for_each_set_clump8 macro to simplify code and improve clarity. An improvement in this case is that banks that are not masked will now be skipped. Link: http://lkml.kernel.org/r/5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@gmail.comSigned-off-by:
-
