Return zero if both dsa_slave_dev_check() and netdev_uses_dsa() are false.

Fixes: acc43b7b ("net: dsa: allow masters to join a LAG")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "burst" string is only initialized for CONFIG_SPARC.  It should be
set to "64" because that's what is used by PCI.

Fixes: 24cddbc3 ("sunhme: Combine continued messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If smc_wr_alloc_lgr_mem() fails then return an error code.  Don't return
success.

Fixes: 8799e310 ("net/smc: add v2 support to the work request layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4
register should be set. The former is already handled in
dp83867_config_init; add the latter in SGMII specific initialization.

Fixes: 2a10154a ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

memcpy: detected field-spanning write (size 168) of single field "(void *)&request->response_msg + (sizeof(struct rndis_message) - sizeof(union rndis_message_container)) + sizeof(*req_id)" at drivers/net/hyperv/rndis_filter.c:338 (size 40)
RSP: 0018:ffffc90000144de0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881766b4000 RCX: 0000000000000000
RDX: 0000000000000102 RSI: 0000000000009ffb RDI: 00000000ffffffff
RBP: ffffc90000144e38 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffc90000144c48 R11: ffffffff82f56ac8 R12: ffff8881766b403c
R13: 00000000000000a8 R14: ffff888100b75000 R15: ffff888179301d00
FS:  0000000000000000(0000) GS:ffff8884d6280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f8b024c418 CR3: 0000000176548001 CR4: 00000000003706e0
Call Trace:
 <IRQ>
 ? _raw_spin_unlock_irqrestore+0x27/0x50
 netvsc_poll+0x556/0x940 [hv_netvsc]
 __napi_poll+0x2e/0x170
 net_rx_action+0x299/0x2f0
 __do_softirq+0xed/0x2ef
 __irq_exit_rcu+0x9f/0x110
 irq_exit_rcu+0xe/0x20
 sysvec_hyperv_callback+0xb0/0xd0
 </IRQ>
 <TASK>
 asm_sysvec_hyperv_callback+0x1b/0x20
RIP: 0010:native_safe_halt+0xb/0x10

Fixes: A warning triggered when the response message len exceeds
the size of rndis_message. Inside the rndis_request structure
these fields are however followed by a RNDIS_EXT_LEN padding
so it is safe to use unsafe_memcpy.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Then the input contains '\0' or '\n', proc_mpc_write has read them,
so the return value needs +1.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changing a VF's mac address through the VF (rather than via the PF)
fails with EPERM because the latter part of efx_ef10_set_mac_address
attempts to change the vport mac address list as the VF.
Even with this fixed it still fails with EBUSY because the vadaptor
is still assigned on the VF - the vadaptor reassignment must be within
a section where the VF has torn down its state.

A major reason this has broken is because we have two functions that
ostensibly do the same thing - have a PF and VF cooperate to change a
VF mac address. Rather than do this, if we are changing the mac of a VF
that has a link to the PF in the same VM then simply call
sriov_set_vf_mac instead, which is a proven working function that does
that.

If there is no PF available, or that fails non-fatally, then attempt to
change the VF's mac address as we would a PF, without updating the PF's
data.

Test case:
Create a VF:
  echo 1 > /sys/class/net/<if>/device/sriov_numvfs
Set the mac address of the VF directly:
  ip link set <vf> addr 00:11:22:33:44:55
Set the MAC address of the VF via the PF:
  ip link set <pf> vf 0 mac 00:11:22:33:44:66
Without this patch the last command will fail with ENOENT.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Fixes: 910c8789 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC")
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User
unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and
driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For FT2000+/64 devices,
when four virtual machines share the same physical network interface,
DROP will occur due to the single core CPU performance problem.

ip_check_defrag and macvlan_process_broadcast is on the same CPU.
When the MACVLAN PORT increases, the CPU usage reaches more than 90%.
bc_queue > bc_queue_len_used (default 1000), causing DROP.
Signed-off-by: zhangxiangqian <zhangxiangqian@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS tries to get away with using the TCP input queue directly.
This does not work if there is duplicated data (multiple skbs
holding bytes for the same seq number range due to retransmits).
Check for this condition and fall back to copy mode, it should
be rare.

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

During reallocation of RX buffers, new DMA mappings are created for
those buffers.

steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done

This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b

This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.

Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.

If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler.

Fixes: be1222b5 ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>

The switch sends autocast mib in little-endian. This is problematic for
big-endian system as the values needs to be converted.

Fix this by converting each mib value to cpu byte order.

Fixes: 5c957c7c ("net: dsa: qca8k: add support for mib autocast in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The header and the data of the skb for the inband mgmt requires
to be in little-endian. This is problematic for big-endian system
as the mgmt header is written in the cpu byte order.

Fix this by converting each value for the mgmt header and data to
little-endian, and convert to cpu byte order the mgmt header and
data sent by the switch.

Fixes: 5950c7c0 ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a 8-byte write to initialize sub.usr_handle in
tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized
when issuing setsockopt(..., SOL_TIPC, ...).
This resulted in an infoleak reported by KMSAN when the packet was
received:

  =====================================================
  BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169
   instrument_copy_to_user ./include/linux/instrumented.h:121
   copyout+0xbc/0x100 lib/iov_iter.c:169
   _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527
   copy_to_iter ./include/linux/uio.h:176
   simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513
   __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419
   skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527
   skb_copy_datagram_msg ./include/linux/skbuff.h:3903
   packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469
   ____sys_recvmsg+0x2c4/0x810 net/socket.c:?
   ___sys_recvmsg+0x217/0x840 net/socket.c:2743
   __sys_recvmsg net/socket.c:2773
   __do_sys_recvmsg net/socket.c:2783
   __se_sys_recvmsg net/socket.c:2780
   __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780
   do_syscall_x64 arch/x86/entry/common.c:50
   do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120

  ...

  Uninit was stored to memory at:
   tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156
   tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375
   tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579
   tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190
   tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084
   tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201
   __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252
   __do_sys_setsockopt net/socket.c:2263
   __se_sys_setsockopt net/socket.c:2260
   __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260
   do_syscall_x64 arch/x86/entry/common.c:50
   do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120

  Local variable sub created at:
   tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562
   tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190

  Bytes 84-87 of 88 are uninitialized
  Memory access of size 88 starts at ffff88801ed57cd0
  Data copied to user address 0000000020000400
  ...
  =====================================================
Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 026321c6 ("tipc: rename tipc_server to tipc_topsrv")
Signed-off-by: David S. Miller <davem@davemloft.net>

The trial period exists until jiffies is after addr_trial_end. But as
jiffies will eventually overflow, just using time_after will eventually
give incorrect results. As the node address is set once the trial period
ends, this can be used to know that we are not in the trial period.

Fixes: e415577f ("tipc: correct discovery message handling during address trial period")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, and wifi.

Current release - regressions:

   - Revert "net/sched: taprio: make qdisc_leaf() see the
     per-netdev-queue pfifo child qdiscs", it may cause crashes when the
     qdisc is reconfigured

   - inet: ping: fix splat due to packet allocation refactoring in inet

   - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
     due to races when per-netns hash table is used

  Current release - new code bugs:

   - eth: adin1110: check in netdev_event that netdev belongs to driver

   - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.

  Previous releases - regressions:

   - ipv4: handle attempt to delete multipath route when fib_info
     contains an nh reference, avoid oob access

   - wifi: fix handful of bugs in the new Multi-BSSID code

   - wifi: mt76: fix rate reporting / throughput regression on mt7915
     and newer, fix checksum offload

   - wifi: iwlwifi: mvm: fix double list_add at
     iwl_mvm_mac_wake_tx_queue (other cases)

   - wifi: mac80211: do not drop packets smaller than the LLC-SNAP
     header on fast-rx

  Previous releases - always broken:

   - ieee802154: don't warn zero-sized raw_sendmsg()

   - ipv6: ping: fix wrong checksum for large frames

   - mctp: prevent double key removal and unref

   - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM

   - hv_netvsc: fix race between VF offering and VF association message

  Misc:

   - remove -Warray-bounds silencing in the drivers, compilers fixed"

* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  sunhme: fix an IS_ERR() vs NULL check in probe
  net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
  kcm: avoid potential race in kcm_tx_work
  tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
  net: phy: micrel: Fixes FIELD_GET assertion
  openvswitch: add nf_ct_is_confirmed check before assigning the helper
  tcp: Fix data races around icsk->icsk_af_ops.
  ipv6: Fix data races around sk->sk_prot.
  tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
  udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
  tcp/udp: Fix memory leak in ipv6_renew_options().
  mctp: prevent double key removal and unref
  selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
  netfilter: rpfilter/fib: Populate flowic_l3mdev field
  selftests: netfilter: Test reverse path filtering
  net/mlx5: Make ASO poll CQ usable in atomic context
  tcp: cdg: allow tcp_cdg_release() to be called multiple times
  inet: ping: fix recent breakage
  ipv6: ping: fix wrong checksum for large frames
  net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
  ...

Pull virtio fixes from Michael Tsirkin:

 - Fix a regression in virtio pci on power

 - Add a reviewer for ifcvf

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/ifcvf: add reviewer
  virtio_pci: use irq to detect interrupt support

Pull tracing fixes from Steven Rostedt:

 - Found that the synthetic events were using strlen/strscpy() on values
   that could have come from userspace, and that is bad.

   Consolidate the string logic of kprobe and eprobe and extend it to
   the synthetic events to safely process string addresses.

 - Clean up content of text dump in ftrace_bug() where the output does
   not make char reads into signed and sign extending the byte output.

 - Fix some kernel docs in the ring buffer code.

* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix reading strings from synthetic events
  tracing: Add "(fault)" name injection to kernel probes
  tracing: Move duplicate code of trace_kprobe/eprobe.c into header
  ring-buffer: Fix kernel-doc
  ftrace: Fix char print issue in print_ip_ins()

Pull watchdog updates from Wim Van Sebroeck:

 - new driver for Exar/MaxLinear XR28V38x

 - support for exynosautov9 SoC

 - support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC

 - support for imx93

 - several other fixes and improvements

* tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
  watchdog: twl4030_wdt: add missing mod_devicetable.h include
  dt-bindings: watchdog: migrate mt7621 text bindings to YAML
  watchdog: sp5100_tco: Add "action" module parameter
  watchdog: imx93: add watchdog timer on imx93
  watchdog: imx7ulp_wdt: init wdog when it was active
  watchdog: imx7ulp_wdt: Handle wdog reconfigure failure
  watchdog: imx7ulp_wdt: Fix RCS timeout issue
  watchdog: imx7ulp_wdt: Check CMD32EN in wdog init
  watchdog: imx7ulp: Add explict memory barrier for unlock sequence
  watchdog: imx7ulp: Move suspend/resume to noirq phase
  watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code
  dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt
  watchdog: s3c2410_wdt: support exynosautov9 watchdog
  dt-bindings: watchdog: add exynosautov9 compatible
  watchdog: npcm: Enable clock if provided
  watchdog: meson: keep running if already active
  watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema
  watchdog: armada_37xx_wdt: Fix .set_timeout callback
  watchdog: sa1100: make variable sa1100dog_driver static
  watchdog: w83977f_wdt: Fix comment typo
  ...

Pull ceph updates from Ilya Dryomov:
 "A quiet round this time: several assorted filesystem fixes, the most
  noteworthy one being some additional wakeups in cap handling code, and
  a messenger cleanup"

* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
  ceph: remove Sage's git tree from documentation
  ceph: fix incorrectly showing the .snap size for stat
  ceph: fail the open_by_handle_at() if the dentry is being unlinked
  ceph: increment i_version when doing a setattr with caps
  ceph: Use kcalloc for allocating multiple elements
  ceph: no need to wait for transition RDCACHE|RD -> RD
  ceph: fail the request if the peer MDS doesn't support getvxattr op
  ceph: wake up the waiters if any new caps comes
  libceph: drop last_piece flag from ceph_msg_data_cursor

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add NFSv4.2 xattr tracepoints
   - Replace xprtiod WQ in rpcrdma
   - Flexfiles cancels I/O on layout recall or revoke

  Bugfixes and Cleanups:
   - Directly use ida_alloc() / ida_free()
   - Don't open-code max_t()
   - Prefer using strscpy over strlcpy
   - Remove unused forward declarations
   - Always return layout states on flexfiles layout return
   - Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of
     error
   - Allow more xprtrdma memory allocations to fail without triggering a
     reclaim
   - Various other xprtrdma clean ups
   - Fix rpc_killall_tasks() races"

* tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
  NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked
  SUNRPC: Add API to force the client to disconnect
  SUNRPC: Add a helper to allow pNFS drivers to selectively cancel RPC calls
  SUNRPC: Fix races with rpc_killall_tasks()
  xprtrdma: Fix uninitialized variable
  xprtrdma: Prevent memory allocations from driving a reclaim
  xprtrdma: Memory allocation should be allowed to fail during connect
  xprtrdma: MR-related memory allocation should be allowed to fail
  xprtrdma: Clean up synopsis of rpcrdma_regbuf_alloc()
  xprtrdma: Clean up synopsis of rpcrdma_req_create()
  svcrdma: Clean up RPCRDMA_DEF_GFP
  SUNRPC: Replace the use of the xprtiod WQ in rpcrdma
  NFSv4.2: Add a tracepoint for listxattr
  NFSv4.2: Add tracepoints for getxattr, setxattr, and removexattr
  NFSv4.2: Move TRACE_DEFINE_ENUM(NFS4_CONTENT_*) under CONFIG_NFS_V4_2
  NFSv4.2: Add special handling for LISTXATTR receiving NFS4ERR_NOXATTR
  nfs: remove nfs_wait_atomic_killable() and nfs_write_prepare() declaration
  NFSv4: remove nfs4_renewd_prepare_shutdown() declaration
  fs/nfs/pnfs_nfs.c: fix spelling typo and syntax error in comment
  NFSv4/pNFS: Always return layout stats on layout return for flexfiles
  ...

Pull orangefs update from Mike Marshall:
 "Change iterate to iterate_shared"

* tag 'for-linus-6.1-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  Orangefs: change iterate to iterate_shared

The devm_request_region() function does not return error pointers, it
returns NULL on error.

Fixes: 914d9b27 ("sunhme: switch to devres")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The __prestera_nexthop_group_create() function returns NULL on error
and the prestera_nexthop_group_get() returns error pointers.  Fix these
two checks.

Fixes: 0a23ae23 ("net: marvell: prestera: Add router nexthops ABI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found that kcm_tx_work() could crash [1] in:

	/* Primarily for SOCK_SEQPACKET sockets */
	if (likely(sk->sk_socket) &&
	    test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
<<*>>	clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
		sk->sk_write_space(sk);
	}

I think the reason is that another thread might concurrently
run in kcm_release() and call sock_orphan(sk) while sk is not
locked. kcm_tx_work() find sk->sk_socket being NULL.

[1]
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:86 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
Write of size 8 at addr 0000000000000008 by task kworker/u4:3/53

CPU: 0 PID: 53 Comm: kworker/u4:3 Not tainted 5.19.0-rc3-next-20220621-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kkcmd kcm_tx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
kasan_report+0xbe/0x1f0 mm/kasan/report.c:495
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
instrument_atomic_write include/linux/instrumented.h:86 [inline]
clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Link: https://lore.kernel.org/r/20221012133412.519394-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet reported a use-after-free related to the per-netns ehash
series. [0]

When we create a TCP socket from userspace, the socket always holds a
refcnt of the netns.  This guarantees that a reqsk timer is always fired
before netns dismantle.  Each reqsk has a refcnt of its listener, so the
listener is not freed before the reqsk, and the net is not freed before
the listener as well.

OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt
of its netns.  Thus, a reqsk timer can be fired after the netns dismantle
and access freed per-netns ehash.

To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets
in inet_twsk_purge() if the netns uses a per-netns ehash.

[0]: https://lore.kernel.org/netdev/CANn89iLXMup0dRD_Ov79Xt8N9FM0XdhCHEN05sf3eLwxKweM6w@mail.gmail.com/

BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo
include/net/inet_hashtables.h:181 [inline]
BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350
net/ipv4/inet_connection_sock.c:913
Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301

CPU: 1 PID: 8301 Comm: syz-executor.2 Not tainted
6.0.0-syzkaller-02757-gaf7d23f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/22/2022
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline]
reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913
inet_csk_reqsk_queue_drop net/ipv4/inet_connection_sock.c:927 [inline]
inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:939 [inline]
reqsk_timer_handler+0x724/0x1160 net/ipv4/inet_connection_sock.c:1053
call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
__run_timers kernel/time/timer.c:1768 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
__do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x5/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1107
</IRQ>

Fixes: d1e5e640 ("tcp: Introduce optional per-netns ehash.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221012145036.74960-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Zhu Lingshan has been writing and reviewing ifcvf patches for
a while now, add as reviewer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>

commit 71491c54 ("virtio_pci: don't try to use intxif pin is zero")
breaks virtio_pci on powerpc, when running as a qemu guest.

vp_find_vqs() bails out because pci_dev->pin == 0.

But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would
succeed if we called it - which is what the code used to do.

This seems to happen because pci_dev->pin is not populated in
pci_assign_irq(). A PCI core bug? Maybe.

However Linus said:
	I really think that that is basically the only time you should use
	that 'pci_dev->pin' thing: it basically exists not for "does this
	device have an IRQ", but for "what is the routing of this irq on this
	device".

and
	The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does
		if (dev->irq) ...

so let's just check irq and be done with it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 71491c54 ("virtio_pci: don't try to use intxif pin is zero")
Cc: "Angus Chen" <angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221012220312.308522-1-mst@redhat.com>

Johannes Berg says:

====================
More wireless fixes for 6.1

This has only the fixes for the scan parsing issues.

* tag 'wireless-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: update hidden BSSes to avoid WARN_ON
  wifi: mac80211: fix crash in beacon protection for P2P-device
  wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
  wifi: cfg80211: avoid nontransmitted BSS list corruption
  wifi: cfg80211: fix BSS refcounting bugs
  wifi: cfg80211: ensure length byte is present before access
  wifi: mac80211: fix MBSSID parsing use-after-free
  wifi: cfg80211/mac80211: reject bad MBSSID elements
  wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()
====================

Link: https://lore.kernel.org/r/20221013100522.46346-1-johannes@sipsolutions.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull in the fixes for various scan parsing bugs found by
Sönke Huster by fuzzing.

FIELD_GET() must only be used with a mask that is a compile-time
constant. Mark the functions as __always_inline to avoid the problem.

Fixes: 21b688da ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Link: https://lore.kernel.org/r/20221011095437.12580-1-Divya.Koppera@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A WARN_ON call trace would be triggered when 'ct(commit, alg=helper)'
applies on a confirmed connection:

  WARNING: CPU: 0 PID: 1251 at net/netfilter/nf_conntrack_extend.c:98
  RIP: 0010:nf_ct_ext_add+0x12d/0x150 [nf_conntrack]
  Call Trace:
   <TASK>
   nf_ct_helper_ext_add+0x12/0x60 [nf_conntrack]
   __nf_ct_try_assign_helper+0xc4/0x160 [nf_conntrack]
   __ovs_ct_lookup+0x72e/0x780 [openvswitch]
   ovs_ct_execute+0x1d8/0x920 [openvswitch]
   do_execute_actions+0x4e6/0xb60 [openvswitch]
   ovs_execute_actions+0x60/0x140 [openvswitch]
   ovs_packet_cmd_execute+0x2ad/0x310 [openvswitch]
   genl_family_rcv_msg_doit.isra.15+0x113/0x150
   genl_rcv_msg+0xef/0x1f0

which can be reproduced with these OVS flows:

  table=0, in_port=veth1,tcp,tcp_dst=2121,ct_state=-trk
  actions=ct(commit, table=1)
  table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+new
  actions=ct(commit, alg=ftp),normal

The issue was introduced by commit 248d45f1 ("openvswitch: Allow
attaching helper in later commit") where it somehow removed the check
of nf_ct_is_confirmed before asigning the helper. This patch is to fix
it by bringing it back.

Fixes: 248d45f1 ("openvswitch: Allow attaching helper in later commit")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/c5c9092a22a2194650222bffaf786902613deb16.1665085502.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
tcp/udp: Fix memory leaks and data races around IPV6_ADDRFORM.

This series fixes some memory leaks and data races caused in the
same scenario where one thread converts an IPv6 socket into IPv4
with IPV6_ADDRFORM and another accesses the socket concurrently.

  v4: https://lore.kernel.org/netdev/20221004171802.40968-1-kuniyu@amazon.com/
  v3 (Resend): https://lore.kernel.org/netdev/20221003154425.49458-1-kuniyu@amazon.com/
  v3: https://lore.kernel.org/netdev/20220929012542.55424-1-kuniyu@amazon.com/
  v2: https://lore.kernel.org/netdev/20220928002741.64237-1-kuniyu@amazon.com/
  v1: https://lore.kernel.org/netdev/20220927161209.32939-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20221006185349.74777-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops
under lock_sock(), but tcp_(get|set)sockopt() read it locklessly.  To
avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE()
for the reads and writes.

Thanks to Eric Dumazet for providing the syzbot report:

BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect

write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0:
tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240
__inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724
__sys_connect_file net/socket.c:1976 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1993
__do_sys_connect net/socket.c:2003 [inline]
__se_sys_connect net/socket.c:2000 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:2000
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1:
tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted
6.0.0-rc4-syzkaller-00331-g4ed9c1e9-dirty #0

Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 08/26/2022

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 086d4905 ("ipv6: annotate some data-races around sk->sk_prot")
fixed some data-races around sk->sk_prot but it was not enough.

Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot
without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid
load tearing.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM.  However, commit 03485f2a ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:

setsockopt(IPV6_ADDRFORM)                 sendmsg()
+-----------------------+                 +-------+
- do_ipv6_setsockopt(sk, ...)             - udpv6_sendmsg(sk, ...)
  - sockopt_lock_sock(sk)                   ^._ called via udpv6_prot
    - lock_sock(sk)                             before WRITE_ONCE()
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)
  - inet6_destroy_sock()                    - if (!corkreq)
  - sockopt_release_sock(sk)                  - ip6_make_skb(sk, ...)
    - release_sock(sk)                          ^._ lockless fast path for
                                                    the non-corking case

                                                - __ip6_append_data(sk, ...)
                                                  - ipv6_local_rxpmtu(sk, ...)
                                                    - xchg(&np->rxpmtu, skb)
                                                      ^._ rxpmtu is never freed.

                                                - goto out_no_dst;

                                            - lock_sock(sk)

For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e2732600 ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there.  Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.

We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport.  So they can be posted as a follow-up later for net-next.

Fixes: 03485f2a ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 4b340ae2 ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM.  After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.

This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.

However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 03485f2a ("udpv6: Add lockless
sendmsg() support").  We will fix this case in the following patch.

Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.

Fixes: 4b340ae2 ("IPv6: Complete IPV6_DONTFRAG support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported a memory leak [0] related to IPV6_ADDRFORM.

The scenario is that while one thread is converting an IPv6 socket into
IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and
allocates memory to inet6_sk(sk)->XXX after conversion.

Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources,
which inet6_destroy_sock() should have cleaned up.

setsockopt(IPV6_ADDRFORM)                 setsockopt(IPV6_DSTOPTS)
+-----------------------+                 +----------------------+
- do_ipv6_setsockopt(sk, ...)
  - sockopt_lock_sock(sk)                 - do_ipv6_setsockopt(sk, ...)
    - lock_sock(sk)                         ^._ called via tcpv6_prot
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)          before WRITE_ONCE()
  - xchg(&np->opt, NULL)
  - txopt_put(opt)
  - sockopt_release_sock(sk)
    - release_sock(sk)                      - sockopt_lock_sock(sk)
                                              - lock_sock(sk)
                                            - ipv6_set_opt_hdr(sk, ...)
                                              - ipv6_update_options(sk, opt)
                                                - xchg(&inet6_sk(sk)->opt, opt)
                                                  ^._ opt is never freed.

                                            - sockopt_release_sock(sk)
                                              - release_sock(sk)

Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this
memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after
acquiring the lock.

This issue exists from the initial commit between IPV6_ADDRFORM and
IPV6_PKTOPTIONS.

[0]:
BUG: memory leak
unreferenced object 0xffff888009ab9f80 (size 96):
  comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s)
  hex dump (first 32 bytes):
    01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00  ....H...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline]
    [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566
    [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318
    [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline]
    [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668
    [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021
    [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789
    [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252
    [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline]
    [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline]
    [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260
    [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull more KUnit updates from Shuah Khan:
 "Features and fixes:

   - simplify resource use

   - make kunit_malloc() and kunit_free() allocations and frees
     consistent. kunit_free() frees only the memory allocated by
     kunit_malloc()

   - stop downloading risc-v opensbi binaries using wget

   - other fixes and improvements to tool and KUnit framework"

* tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: Update description of --alltests option
  kunit: declare kunit_assert structs as const
  kunit: rename base KUNIT_ASSERTION macro to _KUNIT_FAILED
  kunit: remove format func from struct kunit_assert, get it to 0 bytes
  kunit: tool: Don't download risc-v opensbi firmware with wget
  kunit: make kunit_kfree(NULL) a no-op to match kfree()
  kunit: make kunit_kfree() not segfault on invalid inputs
  kunit: make kunit_kfree() only work on pointers from kunit_malloc() and friends
  kunit: drop test pointer in string_stream_fragment
  kunit: string-stream: Simplify resource use