nfs_setattr calls nfs_update_inode() directly, so we have to reset the
m/ctime there.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If the atime or mtime attributes were delegated, then we need to
propagate their new values back to the server when returning the
delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If we see that the server supports attribute delegations, then request
them by setting the appropriate OPEN arguments.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Cache whether or not the server may have support for delegated
attributes in a capability flag.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

After a reboot of the NFSv4.2 server, the recovery code needs to specify
whether the delegation to be recovered is an attribute delegation or
not.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Ensure that we update the mtime and atime correctly when we read
or write data to the file and when we truncate. Let the server manage
ctime on other attribute updates.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This argument will be used to allow the caller to specify whether or not
they need to know that this is an attribute delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When the client holds an attribute delegation, the server may retrieve
all the timestamps through a CB_GETATTR callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

We want to send the updated atime and mtime as part of the delegreturn
compound. Add a special structure to hold those variables.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Add the attribute delegation XDR definitions from the spec.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Modify it to no longer depend directly on the struct opendata.
This will enable sharing with WANT_DELEGATION.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Instead of having the fields open coded in the struct nfs_openres,
add a separate structure for them so that we can reuse that code
for the WANT_DELEGATION case.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfs_common/nfs_acl.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfs_common/grace.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfs/nfs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfs/nfsv2.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfs/nfsv3.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/nfs/nfsv4.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

'mnt_fhstatus' has been unused since
commit 065015e5 ("NFS: Remove unused XDR decoder functions").

Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Prior to the commit identified below, call_transmit_status() would
handle -EPERM and other errors related to an unreachable server by
falling through to call_status() which added a 3-second delay and
handled the failure as a timeout.

Since that commit, call_transmit_status() falls through to
handle_bind().  For UDP this moves straight on to handle_connect() and
handle_transmit() so we immediately retransmit - and likely get the same
error.

This results in an indefinite loop in __rpc_execute() which triggers a
soft-lockup warning.

For the errors that indicate an unreachable server,
call_transmit_status() should fall back to call_status() as it did
before.  This cannot cause the thundering herd that the previous patch
was avoiding, as the call_status() will insert a delay.

Fixes: ed7dc973 ("SUNRPC: Prevent thundering herd when the socket is not connected")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The original code was designed so that most calls to
rpcrdma_rep_create() would occur on the NUMA node that the device
preferred. There are a few cases where that's not possible, so
those reps are marked as temporary.

However, we have the device (and its preferred node) already in
rpcrdma_rep_create(), so let's use that to guarantee the memory
is allocated from the correct node.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Commit 7a03aeb6 ("xprtrdma: Micro-optimize MR DMA-unmapping")
removed the last use of the @r_xprt parameter in this function, but
neglected to remove the parameter itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Wait for all disconnects to complete to ensure the transport has
divested all of its hardware resources before the underlying RDMA
device can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Commit e87a911f ("nvme-rdma: use ib_client API to detect device
removal") explains the benefits of handling device removal outside
of the CM event handler.

Sketch in an IB device removal notification mechanism that can be
used by both the client and server side RPC-over-RDMA transport
implementations.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Avoid FastReg operations getting MW_BIND_ERR after a reconnect.

rpcrdma_reqs_reset() is called on transport tear-down to get each
rpcrdma_req back into a clean state.

MRs on req->rl_registered are waiting for a FastReg, are already
registered, or are waiting for invalidation. If the transport is
being torn down when reqs_reset() is called, the matching LocalInv
might never be posted. That leaves these MR registered /and/ on
req->rl_free_mrs, where they can be re-used for the next
connection.

Since xprtrdma does not keep specific track of the MR state, it's
not possible to know what state these MRs are in, so the only safe
thing to do is release them immediately.

Fixes: 5de55ce9 ("xprtrdma: Release in-flight MRs on disconnect")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFS already is void of folio size assumption, so just pass the chunk size
to __filemap_get_folio and set the large folio address_space flag for all
regular files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Modelled after the loop in iomap_write_iter(), copy larger chunks from
userspace if the filesystem has created large folios.

[hch: use mapping_max_folio_size to keep supporting file systems that do
 not support large folios]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

asm-generic/barrier.h and asm/bitops.h are already brought into the
file through the header linux/sunrpc/svc_rdma.h and the file can
still be built with their removal. They have been replaced with the
preferred linux/bitops.h and asm/barrier.h to remove the need for the
asm-generic header.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull clk fixes from Stephen Boyd:
 "A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:

   - Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
     set the alpha enable bit and not set bits that don't exist

   - Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
     warnings

   - Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
     correct

   - Fix the min/max rate clamping logic in the Allwinner driver that
     got broken in v6.9

   - Limit runtime PM enabling in the Mediatek driver to only
     mt8183-mfgcfg so that system wide resume doesn't break on other
     Mediatek SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
  clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
  clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
  clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
  clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

Pull powerpc fixes from Michael Ellerman:

 - Fix unnecessary copy to 0 when kernel is booted at address 0

 - Fix usercopy crash when dumping dtl via debugfs

 - Avoid possible crash when PCI hotplug races with error handling

 - Fix kexec crash caused by scv being disabled before other CPUs
   call-in

 - Fix powerpc selftests build with USERCFLAGS set

Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.

* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix build with USERCFLAGS set
  powerpc/pseries: Fix scv instruction crash with kexec
  powerpc/eeh: avoid possible crash when edev->pdev changes
  powerpc/pseries: Whitelist dtl slub object for copying to userspace
  powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0

Pull smb client fix from Steve French:
 "Fix for smb3 readahead performance regression"

* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix read-performance regression by dropping readahead expansion

Pull i2c fix from Wolfram Sang:
 "An i2c driver fix"

* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr

Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -Wno-error    cache_shape.c ...
  cache_shape.c:18:10: fatal error: utils.h: No such file or directory
     18 | #include "utils.h"
        |          ^~~~~~~~~
  compilation terminated.

This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.

Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.

Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.

With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
  -I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
  cache_shape.c ...

Fixes: 5553a793 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au

Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity fix from Mimi Zohar:
 "A single bug fix to properly remove all of the securityfs IMA
  measurement lists"

* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: fix wrong zero-assignment during securityfs dentry remove

Pull pci update from Bjorn Helgaas:

 - Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
   Synopsys DesignWare eDMA driver and reflect that he is no longer at
   Synopsys and isn't in a position to maintain the DesignWare xData
   traffic generator (Bjorn Helgaas)

* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
  MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the CMODX example in the recently added icache flushing
   prctl()

 - A fix to the perf driver to avoid corrupting event data on counter
   overflows when external overflow handlers are in use

 - A fix to clear all hardware performance monitor events on boot, to
   avoid dangling events firmware or previously booted kernels from
   triggering spuriously

 - A fix to the perf event probing logic to avoid erroneously reporting
   the presence of unimplemented counters. This also prevents some
   implemented counters from being reported

 - A build fix for the vector sigreturn selftest on clang

 - A fix to ftrace, which now requires the previously optional index
   argument to ftrace_graph_ret_addr()

 - A fix to avoid deadlocking if kexec crash handling triggers in an
   interrupt context

* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Avoid deadlock in kexec crash path
  riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
  riscv: selftests: Fix vsetivli args for clang
  perf: RISC-V: Check standard event availability
  drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
  drivers/perf: riscv: Do not update the event data if uptodate
  documentation: Fix riscv cmodx example

Pull drm fixes from Daniel Vetter:
 "Just small fixes all over here, all quiet as it should.

  drivers:

   - amd: mostly amdgpu display fixes + radeon vm NULL deref fix

   - xe: migration error handling + typoed register name in gt setup

   - i915: usb-c fix to shut up warnings on MTL+

   - panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
     wrongly

   - panel quirks

   - nouveau: NULL deref in get_modes

  drm core:

   - fbdev big endian fix for the dma memory backed variant

  drivers/firmware:

   - fix sysfb refcounting"

* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
  drm/xe/mcr: Avoid clobbering DSS steering
  drm/xe: fix error handling in xe_migrate_update_pgtables
  drm/ttm: Always take the bo delayed cleanup path for imported bos
  drm/fbdev-generic: Fix framebuffer on big endian devices
  drm/panthor: Fix sync-only jobs
  drm/panthor: Don't check the array stride on empty uobj arrays
  drm/amdgpu/atomfirmware: silence UBSAN warning
  drm/radeon: check bo_va->bo is non-NULL before using it
  drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
  drm/amd/display: Update efficiency bandwidth for dcn351
  drm/amd/display: Fix refresh rate range for some panel
  drm/amd/display: Account for cursor prefetch BW in DML1 mode support
  drm/amd/display: Add refresh rate range check
  drm/amd/display: Reset freesync config before update new state
  drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
  drm: panel-orientation-quirks: Add quirk for Valve Galileo
  drm/i915/display: For MTL+ platforms skip mg dp programming
  drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
  firmware: sysfb: Fix reference count of sysfb parent device

Pull gpio fixes from Bartosz Golaszewski:
 "Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
  driver:

   - add two OF lookup quirks for TSC2005 and MIPS Lantiq

   - don't try to figure out bgpio_bits from the 'ngpios' property in
     gpio-mmio"

* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: of: add polarity quirk for TSC2005
  gpio: mmio: do not calculate bgpio_bits via "ngpios"
  gpiolib: of: fix lookup quirk for MIPS Lantiq

Pull TPM fixes from Jarkko Sakkinen:
 "This contains the fixes for !chip->auth condition, preventing the
  breakage of:
   - tpm_ftpm_tee.c
   - tpm_i2c_nuvoton.c
   - tpm_ibmvtpm.c
   - tpm_tis_i2c_cr50.c
   - tpm_vtpm_proxy.c

  All drivers will continue to work as they did in 6.9, except a single
  warning (dev_warn() not WARN()) is printed to klog only to inform that
  authenticated sessions are not enabled"

* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
  tpm: Address !chip->auth in tpm_buf_append_name()
  tpm: Address !chip->auth in tpm2_*_auth_session()

Pull kvm fix from Paolo Bonzini:

 - s390: fix support for z16 systems

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix LPSWEY handling

Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.

Merge tag 'amd-drm-fixes-6.10-2024-07-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-07-03:

amdgpu:
- Freesync fixes
- DML1 bandwidth fix
- DCN 3.5 fixes
- DML2 fix
- Silence an UBSAN warning

radeon:
- GPUVM fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com

DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low".  In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493.

Fixes: d0d89493 ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Merge tag 'kvm-s390-master-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix z16 support

The z16 support might fail with the lpswey instruction. Provide a
handler.