- 16 Dec, 2016 2 commits
-
-
Nicholas Mc Guire authored
udelay_range(2, 3) is inefficient and as discussions with Jani Nikula <jani.nikula@linux.intel.com> unnecessary here. This replaces this tight setting with a relaxed delay of min=20 and max=50. which helps the hrtimer subsystem optimize timer handling. Link: http://lkml.org/lkml/2016/12/15/127 Fixes: commit 37ab0810 ("drm/i915/bxt: DSI enable for BXT") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We usually use 'client' as identifier for the i915_guc_client. For unknown reason, few functions were using 'gc' name. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [joonas.lahtinen@linux.intel.com: Split two lines over 80] Signed-off-by:
-
- 15 Dec, 2016 1 commit
-
-
Tvrtko Ursulin authored
Cast VM pointers before substraction to save the compiler doing a smart one which includes multiplication. v2: Only keep the first optimisation and prettify it. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1481639847-9214-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
- 14 Dec, 2016 3 commits
-
-
Paulo Zanoni authored
We've been ignoring the poor bugzilla reporters that say PSR causes system lockups and all other sorts of problems. The earliest bug report is from April, so I think we can use the "revert the offending commit if no fixes are presented within 8 months" rule here. Fixes: 9b58e352 ("drm/i915: Enable PSR by default on Haswell and Broadwell.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97602 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96736 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96704 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96569 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94985 Cc: <stable@vger.kernel.org> # v4.6+ Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Mika Kuoppala authored
For limiting the max frequency of gpu, the max freq tunable is not enough to hard limit the max gap. We now have also per client boost max freq. When this tunable was introduced, it was mistakenly made read only. Allow user to gain control by setting it writable. Fixes: 29ecd78d ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Cc: <stable@vger.kernel.org> # v4.9+ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com
-
Jani Nikula authored
Commit c9c4b6f6 ("drm/i915: fix swizzle detection for gen3") added a complicated check for I915G/I945G. Pineview and other gen3 devices match IS_MOBILE() anyway. Simplify. Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 13 Dec, 2016 9 commits
-
-
Daniel Vetter authored
It's been unfixed since a while and no one is immediately working on this. And we have the FIXME already. And now also a task in the DP team's backlog. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://lists.freedesktop.org/archives/intel-gfx/2016-July/101951.htmlAcked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Adjust comment per Ville's feedback.] Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213195414.28923-1-daniel.vetter@ffwll.ch
-
Mika Kahola authored
Unify function structure as any other *_hz_to_pwm() functions are structured. Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Mika Kahola authored
Let's switch to use dev_priv instead of dev when calling intel_find_panel_downclock() function. Signed-off-by:
-
Mika Kahola authored
Let's switch to use private dev_priv instead of dev when detecting intel panels. Signed-off-by:
-
Manasi Navare authored
This patch does not change anything functionally, just cleans up the DP compliance related variables and stores them all together in a separate struct intel_dp_compliance. There is another struct intel_dp_compliance_data to store all the test data. This makes it easy to reset the compliance variables through a memset instead of individual resetting. v2: * Removed functional changes for EDID (Jani Nikula) Reviewed-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwl.ch> Signed-off-by:
-
Manasi Navare authored
If link training fails, then we need to fallback to lower link rate first and if link training fails at RBR, then fallback to lower lane count. This function finds the next lower link rate/lane count value after link training failure and limits the max link_rate and lane_count values to these fallback values. v7: * Remove unnecessary intializations and remove redundant call to intel_dp_common_rates (Jani Nikula) v6: * Cap the max link rate and lane count to the max values obtained during fallback link training (Daniel Vetter) v5: * Start the fallback at the lane count value passed not the max lane count (Jani Nikula) v4: * Remove the redundant variable link_train_failed v3: * Remove fallback_link_rate_index variable, just obtain that using the helper intel_dp_link_rate_index (Jani Nikula) v2: Squash the patch that returns the link rate index (Jani Nikula) Acked-by:
Tony Cheng <tony.cheng@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Manasi Navare authored
Sink's capabilities are advertised through DPCD registers and get updated only on hotplug. So they should be computed only once in the long pulse handler and saved off in intel_dp structure for the use later. For this reason two new fields max_sink_lane_count and max_sink_link_bw are added to intel_dp structure. This also simplifies the fallback link rate/lane count logic to handle link training failure. In that case, the max_sink_link_bw and max_sink_lane_count can be reccomputed to match the fallback values lowering the sink capabilities due to link train failure. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Jani Nikula authored
Request the GPIO by index through the consumer API. For now, use a quick hack to store the already requested ones, simply because I have no idea whether this actually works or not, and I have no way to test it. v2 by Mika: switch *NULL* to *"panel"* when requesting gpio for MIPI/DSI panel. Signed-off-by:
-
Tomeu Vizoso authored
In preparation to using a generic API in the DRM core for continuous CRC generation, move the related code out of i915_debugfs.c into a new file. Eventually, only the Intel-specific code will remain in this new file. v2: Rebased. v6: Rebased. v7: Fix whitespace issue. v9: Have intel_display_crc_init accept a drm_i915_private instead. v12: Rebased. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
-
- 12 Dec, 2016 3 commits
-
-
Vidya Srinivas authored
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes. v2 by Jani: - drop obsolete comments, drop redundant initialization (Bob) - merge debug logging into one Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Tested-by:
-
Chris Wilson authored
Some object retain an extra pin whilst they are active (e.g. contexts). This excludes them from being considered for eviction unless we idle the GPU. If before we look at the active list, we retire beforehand we can hopefully remove a few excess pins and reduce the amount of searching required. v2: Similar principle applies to evict_for_vma Signed-off-by:
-
Chris Wilson authored
In commit a4f5ea64 ("drm/i915: Refactor object page API"), I reordered the object->pages teardown to be more friendly wrt to a separate obj->mm.lock. However, I overlooked the phys object and left it with a dangling use-after-free of its phys_handle. Move the allocation of the phys handle to get_pages and it release to put_pages to prevent the invalid access and to improve symmetry. v2: Add commentary about always aligning to page size. Testcase: igt/drv_selftest/objects Reported-by:
-
- 10 Dec, 2016 1 commit
-
-
Nagaraju, Vathsala authored
For PSR2 , as per spec, PSR2_CTL bit 31 to be set. for psr1, bit 31 in SRD_CTL to be set. Reporting "HW Enabled & Active bit" status for psr2 from SRD_CTL gives wrong status. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
vathsala nagaraju <vathsala.nagaraju@intel.com> Reviewed-by:
-
- 09 Dec, 2016 1 commit
-
-
Robert Bragg authored
This adds a 'Perf' section to i915.rst with the following sub sections: - Overview - Comparison with Core Perf - i915 Driver Entry Points - i915 Perf Stream - i915 Perf Observation Architecture Stream - All i915 Perf Internals v2: section headers in i915.rst (Daniel Vetter) missing symbol docs + other fixups (Matthew Auld) Signed-off-by:Robert Bragg <robert@sixbynine.org> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 08 Dec, 2016 5 commits
-
-
Imre Deak authored
According to the previous patch, it's possible atm that we call intel_do_sagv_disable() only once during the 1ms period and time out if that call fails. As opposed to this the spec says that we need to keep retrying this request for a 1ms duration, so let's do this similarly to the CDCLK change notification request. v4-5: - Rebased on the reply_mask, reply change. v6: - Remove w/s change. (Lyude) - Rebased on the timeout_base argument change. Cc: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 656d1b89 ("drm/i915/skl: Add support for the SAGV, fix underrun hangs") Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com
-
Imre Deak authored
commit 848496e5 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c1710 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8af ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by:
-
Tvrtko Ursulin authored
Now that it is available we don't have to open code a similar error message ourselves. Signed-off-by:
-
Tvrtko Ursulin authored
Replace INTEL_ERR_OR_DBG_KMS macro with an intel_err_or_dbg_kms function to shrink the code and rodata strings. text data bss dec hex filename 1271480 41831 2016 1315327 1411ff i915.ko.0 1265160 41831 2016 1309007 13f94f i915.ko.2 Total of ~6 KiB saving across text and strings. v2: * Annotate the function for printf-style checking. * Rename to pipe_config_err. (Chris Wilson) Signed-off-by:
-
Joonas Lahtinen authored
Add WARN_ON to find_fw_domain to registers related to uninitialized hardware. v2: - Print the uninitialized domains and register (Chris) Cc: Imre Deak <imre.deak@intel.com> Cc: Wang Elaine <elaine.wang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 07 Dec, 2016 15 commits
-
-
Jani Nikula authored
Pineview deserves to use its own platform enum (which was already added, unused, previously). IS_G33() no longer matches Pineview, and gets replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no longer an outlier among platform definitions. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Mahesh Kumar authored
This patch Adds a function to extract intel_crtc_state from the atomic_state, if not available it returns NULL. v2 (from Paulo): - Fix white space problem detected by checkpatch. Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
-
Mahesh Kumar authored
This patch changes Watermak calculation to fixed point calculation. Problem with current calculation is during plane_blocks_per_line calculation we divide intermediate blocks with min_scanlines and takes floor of the result because of integer operation. hence we end-up assigning less blocks than required. Which leads to flickers. Changes since V1: - Add fixed point data type as per Paulo's review Changes since V2: - use fixed_point instead of fp_16_16 Changes since V3: - rebase Changes since V4 (from Paulo): - My original renaming suggestion was misunderstood, so implement it - Simplify fixed_16_16_to_u32 implementation - Fix indentation Reviewed-by:
-
Mahesh Kumar authored
Display Workarounds #1141 IPC (Isoch Priority Control) may cause underflows. KBL WA: When IPC is enabled, watermark latency values must be increased by 4us across all levels. This brings level 0 up to 6us. Changes since V1: - Add Workaround number in commit & code Changes since V2 (from Paulo): - Bikeshed the WA tag so it looks like the others Reviewed-by:
-
Mahesh Kumar authored
Display Workarounds #1135 If IPC is enabled in BXT, display underruns are observed. WA: The Line Time programmed in the WM_LINETIME register should be half of the actual calculated Line Time. Programmed Line Time = 1/2*Calculated Line Time Changes since V1: - Add Workaround number in commit & code Changes since V2 (from Paulo): - Bikeshed white space and make the WA tag look like the others Reviewed-by:
-
Mahesh Kumar authored
This patch adds variable to check for X_tiled & y_tiled planes, instead of always checking against framebuffer-modifiers. Changes: - Created separate patch as per Paulo's comment - Added x_tiled variable as well Changes since V2: - Incorporate Paulo's comments - Rebase Changes since V3 (from Paulo): - Bikeshed indentation Reviewed-by:
-
Hans de Goede authored
Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio. Fixes: a0a6d4ff ("drm/i915/dsi: add support for gpio elements on CHV") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd2 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd2 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Robert Bragg authored
Avoid using DRM_ERROR for conditions userspace can trigger with a bad config when opening a stream or from not reading data in a timely fashion (whereby the OA buffer fills up). These conditions are tested by i-g-t which treats error messages as failures if using the test runner. This wasn't an issue while the i915-perf igt tests were being run in isolation. One message relating to seeing a spurious zeroed report was changed to use DRM_NOTE instead of DRM_ERROR. Ideally this warning shouldn't be seen, but it's not a serious problem if it is. Considering that the tail margin mechanism is only a heuristic it's possible we might see this from time to time. Signed-off-by: Robert Bragg <robert@sixbynine.org: Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
Each DSPARB register can house bits for two separate pipes, hence we must protect the registers during reprogramming so that parallel FIFO reconfigurations happening simultaneosly on multiple pipes won't corrupt each others values. We'll use a new spinlock for this instead of the wm_mutex since we'll have to move the DSPARB programming to happen from the vblank evade critical section, and we can't use mutexes in there. v2: Document why we use a spinlock instead of a mutex (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Jani Nikula authored
Duplicating the PCI ID for IS_FOO checks is redundant for a bunch of platforms. Simplify. Reviewed-by:
-
Jani Nikula authored
Distinguish them better. Reviewed-by:
-
Jani Nikula authored
Consistency FTW. Reviewed-by:
-
Jani Nikula authored
Add more consistency to our naming. Pineview remains the outlier. Keep using code names for gen5+. v2: rebased Reviewed-by:
-
Jani Nikula authored
Move G33 and Pineview higher up in the list. Add a couple of blank lines for OCD while at it. Reviewed-by:
-
