- 27 Sep, 2013 2 commits
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem Also fixed-up a badly indented closing brace... Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
-
- 26 Sep, 2013 18 commits
-
-
Roger Luethi authored
Outgoing packets sent by via-rhine have their VLAN PCP field off by one (when hardware acceleration is enabled). The TX descriptor expects only VID and PCP (without a CFI/DEI bit). Peter Boström noticed and reported the bug. Signed-off-by:
Roger Luethi <rl@hellgate.ch> Cc: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arend van Spriel authored
This patch adds explicit call to bcma_core_pci_power_save() from a non-atomic context resolving 'scheduling while atomic' issue. [ 13.224317] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.224322] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.224354] CPU: 0 PID: 1800 Comm: dhcpcd Tainted: G W 3.11.0-wl #1 [ 13.224359] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.224363] ffff880177c12c40 ffff880170fd1968 ffffffff8169af5b 0000000000000007 [ 13.224374] ffff880170fd1ad0 ffff880170fd1978 ffffffff81697ee2 ffff880170fd19f8 [ 13.224383] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.224391] Call Trace: [ 13.224399] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.224403] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.224409] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.224412] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.224416] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.224420] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.224424] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.224429] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.224432] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.224437] [<ffffffffa003733a>] bcma_pcie_mdio_read.isra.5+0x8a/0x100 [bcma] [ 13.224442] [<ffffffffa00374a5>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x25/0x30 [bcma] [ 13.224448] [<ffffffffa00374f9>] bcma_core_pci_power_save+0x49/0x80 [bcma] [ 13.224452] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.224460] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.224467] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.224473] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.224478] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.224483] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.224487] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.224491] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.224495] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.224498] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.224502] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.224505] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.224509] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.224512] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.224516] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.224519] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.224523] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.224528] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.224533] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.224537] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.224541] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b Cc: <stable@vger.kernel.org> # 3.11.x Cc: Tod Jackson <tod.jackson@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
This patch removes the bcma_core_pci_power_save() call from the bcma_core_pci_{up,down}() functions as it tries to schedule thus requiring to call them from non-atomic context. The function bcma_core_pci_power_save() is now exported so the calling module can explicitly use it in non-atomic context. This fixes the 'scheduling while atomic' issue reported by Tod Jackson and Joe Perches. [ 13.210710] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.210718] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.210756] CPU: 2 PID: 1800 Comm: dhcpcd Not tainted 3.11.0-wl #1 [ 13.210762] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.210767] ffff880177c92c40 ffff880170fd1948 ffffffff8169af5b 0000000000000007 [ 13.210777] ffff880170fd1ab0 ffff880170fd1958 ffffffff81697ee2 ffff880170fd19d8 [ 13.210785] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.210794] Call Trace: [ 13.210813] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.210826] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.210837] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.210845] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.210855] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.210867] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.210877] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.210887] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.210897] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.210910] [<ffffffffa00371af>] bcma_pcie_mdio_set_phy.isra.3+0x4f/0x80 [bcma] [ 13.210921] [<ffffffffa003729f>] bcma_pcie_mdio_write.isra.4+0xbf/0xd0 [bcma] [ 13.210932] [<ffffffffa0037498>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x18/0x30 [bcma] [ 13.210942] [<ffffffffa00374ee>] bcma_core_pci_power_save+0x3e/0x80 [bcma] [ 13.210953] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.210975] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.210989] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.211003] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.211020] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.211030] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.211064] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.211076] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.211086] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.211101] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.211109] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.211117] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.211127] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.211136] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.211147] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.211155] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.211169] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.211180] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.211198] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.211202] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.211208] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b [ 13.211217] NOHZ: local_softirq_pending 202 The issue was introduced in v3.11 kernel by following commit: commit aa51e598 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sat Aug 24 00:32:31 2013 +0200 brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by:Hauke Mehrtens <hauke@hauke-m.de> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10 [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480 [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480 [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0 [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480 [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0 [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP <ffff8800001d5d40> [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Cc: <stable@vger.kernel.org> # 3.10.x, 3.11.x Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Tested-by:
-
Bing Zhao authored
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [<ffffffff815a65e0>] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9fa "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by:
Dmitry Khromov <icechrome@gmail.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 We have 4 bytes of interface header for packets delivered to SDIO and PCIe, but not for USB interface. In Tx AMSDU case, currently 4 bytes of garbage data is unnecessarily appended for USB packets. This sometimes leads to a firmware hang, because it may not interpret the data packet correctly. Problem is fixed by removing this redundant headroom for USB. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Christian Lamparter authored
Added USB ID for Corega WLUSB2GTST USB adapter. Cc: <stable@vger.kernel.org> Reported-by:
Joerg Kalisch <the_force@gmx.de> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Solomon Peachy authored
This supercedes the older patch ("cw1200: Don't perform SPI transfers in interrupt context") that badly attempted to fix this problem. This is a far simpler solution, which has the added benefit of actually working. Signed-off-by:Solomon Peachy <pizza@shaftnet.org> Signed-off-by:
-
Solomon Peachy authored
This reverts commit aec8e88c. This solution turned out to cause interrupt delivery problems, and rather than trying to fix this approach, it has been scrapped in favor of an alternative (and far simpler) implementation. Signed-off-by:
-
Bing Zhao authored
For pcie8897, the hs_cfg cancel command (0xe5) times out when host comes out of suspend. This is caused by an incompleted host sleep handshake between driver and firmware. Like SDIO interface, PCIe also needs to go through firmware power save events to complete the handshake for host sleep configuration. Only USB interface doesn't require power save events for hs_cfg. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Larry Finger authored
The private array at the end of the rtl_priv struct is not aligned. On ARM architecture, this causes an alignment trap and is fixed by aligning that array with __align(sizeof(void *)). That should properly align that space according to the requirements of all architectures. Reported-by:
Jason Andrews <jasona@cadence.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
-
Felix Fietkau authored
Prevents race conditions when un-aggregated frames are pending in the driver. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Alexey Khoroshilov authored
If request_firmware_nowait() fails in p54u_load_firmware(), p54u_load_firmware_cb is not called and no one decrements usb_dev refcnt. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Felix Fietkau authored
When .release_buffered_frames was implemented, only A-MPDU packets were buffered internally. Now that this has changed, the BUF_AMPDU flag needs to be checked before calling ath_tx_addto_baw Signed-off-by:
-
Sujith Manoharan authored
The commit "ath9k: Optimize LNA check" tried to use the "rs_firstaggr" flag to optimize the LNA combining algorithm when processing subframes in an A-MPDU. This doesn't appear to work well in practice, so revert it and use the old method of relying on "rs_moreaggr". Cc: stable@vger.kernel.org # 3.11 Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
This might trip up tx completion processing, although the condition that triggers this should not (yet) occur in practice. Signed-off-by:
-
Felix Fietkau authored
Fixes a regression from commit "ath9k: shrink a few data structures by reordering fields" When cloning a buffer, the stale flag (part of bf_state now) needs to be reset after copying the state to prevent tx processing hangs. Signed-off-by:
-
-
- 24 Sep, 2013 5 commits
-
-
Hannes Frederic Sowa authored
In the following scenario the socket is corked: If the first UDP packet is larger then the mtu we try to append it to the write queue via ip6_ufo_append_data. A following packet, which is smaller than the mtu would be appended to the already queued up gso-skb via plain ip6_append_data. This causes random memory corruptions. In ip6_ufo_append_data we also have to be careful to not queue up the same skb multiple times. So setup the gso frame only when no first skb is available. This also fixes a shortcoming where we add the current packet's length to cork->length but return early because of a packet > mtu with dontfrag set (instead of sutracting it again). Found with trinity. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
malahal@us.ibm.com authored
Also changed a log message to indicate that memory was not allocated instead of memory not available! Signed-off-by:
Malahal Naineni <malahal@us.ibm.com> Acked-by:
Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by:
-
Mikulas Patocka authored
In my patch c194992c ("skge: fix broken driver") I didn't fix the skge bug correctly. The value of the new mapping (not old) was passed to pci_unmap_single. If we enable CONFIG_DMA_API_DEBUG, it results in this warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:986 check_sync+0x4c4/0x580() skge 0000:02:07.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000023a0096c0] [size=1536 bytes] This patch makes the skge driver pass the correct value to pci_unmap_single and fixes the warning. It copies the old descriptor to on-stack variable "ee" and unmaps it if mapping of the new descriptor succeeded. This patch should be backported to 3.11-stable. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Reported-by:
Francois Romieu <romieu@fr.zoreil.com> Tested-by:
-
Duan Jiong authored
Redirect isn't an error condition, it should leave the error handler without touching the socket. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Duan Jiong authored
Redirect isn't an error condition, it should leave the error handler without touching the socket. Signed-off-by:
-
- 23 Sep, 2013 15 commits
-
-
Noel Burton-Krahn authored
MRP doesn't implement the periodictimer in 802.1Q, so it never retries if packets get lost. I ran into this problem when MRP sent a MVRP JoinIn before the interface was fully up. The JoinIn was lost, MRP didn't retry, and MVRP registration failed. Tested against Juniper QFabric switches Signed-off-by:
Noel Burton-Krahn <noel@burton-krahn.com> Acked-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
josselin.costanzi@mobile-devices.fr authored
Actually re-send packets when the T1 timer runs out. This fixes a bug where packets are waiting on the write queue until disconnection when no other traffic is outstanding. Signed-off-by:
Josselin Costanzi <josselin.costanzi@mobile-devices.fr> Signed-off-by:
Maxime Jayat <maxime.jayat@mobile-devices.fr> Signed-off-by:
-
Ken O'Brien authored
Add generic rule on encountering Belkin bluetooth usb device F8065bf. Relevant section from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms Signed-off-by:
Ken O'Brien <kernel@kenobrien.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
David S. Miller authored
Yuval Mintz says: ==================== This patch contains various bug fixes, half of which are SR-IOV related (some fixing issues in the recently added VF RSS support), while the other fix a wide assortments of issues in the driver. ==================== Signed-off-by: -
Ariel Elior authored
Commit b9871bcf "bnx2x: VF RSS support - PF side" has deprecated one of the previous existing messages. If an old VF driver were to send this message to the PF then the PF will not reply and leave the mailbox in an unsteady state (and cause a timeout on the VF side). Wait until firmware ack is written before unlocking channel Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yuval Mintz authored
During flows which mask block attentions (e.g., register dump) all parities are masked. However, unlike other blocks the MCP's attention is not masked inside the block but rather the indication to the driver. If another attention (e.g., link change) will occour while there's an MCP parity, the driver will ignore the fact that the parity is masked and erroneously report a parity. This patch forces the driver to read the MCP masking while checking for parities. Signed-off-by:
-
Yuval Mintz authored
During error flows while loading cnic the return value was incorrectly replaced by that of bnx2x_set_real_num_queues(); If that function was to finish successfully then the cnic would have mistakenly thought the load ended successfully, causing issues (& panics) later on. Signed-off-by:
-
Ariel Elior authored
bnx2x_iov_static_resc() should be called after IGU was read for information on the number of available VFs, so that resources will be correctly set. Signed-off-by:
-
Ariel Elior authored
Due to incorrect usage of PF macros when reading information relating to interrupts, some PFs were erroneously unable to support VFs. Signed-off-by:
-
Eilon Greenstein authored
When system CPU is stressed it's possible that the driver will not be able to pulse the FW every second, which will cause the log to be filled with error messages. Increasing the threshold to 5 seconds seems to be enough to eliminate the issue. Signed-off-by:
-
Yaniv Rosner authored
On 848xx PHY (10G-baseT), half-duplex was always advertised regardless of the actual configuration. Change the 848xx duplex settings to advertise half-duplex only if configured. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Fix Warpcore mode setting when active DAC (Direct Attached Cable) is detected. Signed-off-by:
-
Yaniv Rosner authored
when 1G-optic module was plugged in, internal loopback test failed because the driver used to check the optic module (with no need), and for 1G optic module, the link speed was forced down to 1G, while the XMAC (10G MAC) was enabled. This patch avoid accessing optic module in case internal loopback was selected, and update the link speed in case 1G optic module was detected during init stage. Signed-off-by:
-
Yaniv Rosner authored
Relocate bnx2x_disable_kr2 function, and use it to disable KR2 in case it is not configured in order to clear it's configuration, otherwise the link may come up at 20G instead of the requested 10G-KR. In addition, restart AN after disabling KR2 as part of the KR2 work-around. Signed-off-by:
-
Yaniv Rosner authored
Previously, in case of KR link down, the driver would reset the PHY and restart auto negotiation only when old Warpcore microcode was used (below D108). This patch comes to generalize this by keep trying to restart KR link, regardless of Warpcore microcode, since it was found that it solves another link issue which source is a link-partner. As part of this change, the signal detect is no longer a condition to apply the work-around to cover this new case. Like before, as long as the link is down, AN will be restarted every 2 seconds. Signed-off-by:
-
