- 04 May, 2018 40 commits
-
-
Chris Mayo authored
Messages expected during device probe were being marked as errors. Signed-off-by:
Chris Mayo <aklhfex@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
Such check is already there at the routine. So, no need to repeat it outside. Cc: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: -
Akihiro Tsukada authored
This patch slightly simplifies the binding code by introducing commit 8f569c0b ("media: dvb-core: add helper functions for I2C binding"). Signed-off-by:
Akihiro Tsukada <tskd08@gmail.com> Signed-off-by:
-
Rainer Keller authored
Newer DVB receivers of this type have a different USB PID. Signed-off-by:
Rainer Keller <mail@rainerkeller.de> Signed-off-by:
-
Daniel Scheller authored
Three really tiny minors in this single commit which all on their own would just clutter up the commit history unnecessarily: * ddbridge-regs.h is lacking an include guard. Add it. * Fix an unnecessary NULL initialisation in ddbridge-ci. The declaration of the ci struct ptr is immediately followed by kzalloc(). * Clarify that the CXD2099AR is a Sony device in the cxd2099 driver at a few places including Kconfig. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Acked-by:
Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Arnd Bergmann authored
The -Warray-bounds warning in gcc-8 triggers for a newly added file: drivers/media/spi/cxd2880-spi.c: In function 'cxd2880_write_reg': drivers/media/spi/cxd2880-spi.c:111:3: error: 'memcpy' forming offset [133, 258] is out of the bounds [0, 132] of object 'send_data' with type 'u8[132]' {aka 'unsigned char[132]'} [-Werror=array-bounds] The problem appears to be that we have two range checks in this function, first comparing against BURST_WRITE_MAX (128) and then comparing against a literal '255'. The logic checking the buffer size looks at the second one and decides that this might be the actual maximum data length. This is understandable behavior from the compiler, but the code is actually safe. Since the first check is already shorter, we can remove the loop and only leave that. To be on the safe side in case BURST_WRITE_MAX might be increased, I'm leaving the check against U8_MAX. Fixes: bd24fcdd ("media: cxd2880-spi: Add support for CXD2880 SPI interface") Cc: Martin Sebor <msebor@gmail.com> Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
If state is not initialized or is freed, we can't use it: drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: potential null dereference 'state'. (kzalloc returns null) drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: we previously assumed 'state' could be null (see line 878) drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: dereferencing freed memory 'state' Fixes: 23ba635d ("media: lgdt330x: convert it to the new I2C binding way") Signed-off-by:
-
Mauro Carvalho Chehab authored
Show the UCB error counts via DVBv5. Please notice that there's no scale indication at the driver. As we don't have the datasheet, let's assume that it is receiving data at a rate of 10.000 packets per second. Ideally, this should be read or estimated. In order to avoid flooding I2C bus with data, the maximum polling rate for those stats was set to 1 second. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This routine does nothing. Remove it. Signed-off-by:
-
Mauro Carvalho Chehab authored
Change the logic at the driver to provide CNR stats via DVBv5 API. Signed-off-by:
-
Mauro Carvalho Chehab authored
In preparation to implement DVBv5 stats on this driver, move the *read_status functions to happen after SNR and signal strength routines. Signed-off-by:
-
Mauro Carvalho Chehab authored
There are several register init arrays there that can be constified. The change reduced a little bit the amount of initialized data: text data bss dec hex filename 6372 360 4 6736 1a50 old/drivers/media/dvb-frontends/lgdt330x.o 6500 264 4 6768 1a70 new/drivers/media/dvb-frontends/lgdt330x.o Signed-off-by:
-
Mauro Carvalho Chehab authored
Simplify a few ifs there. While here, add debug messages for the 8-vsb and qam log status flags. Signed-off-by:
-
Mauro Carvalho Chehab authored
Convert the driver to allow its usage with the new I2C binding way. Please notice that this patch doesn't convert the callers to bind to it using the new way. Signed-off-by:
-
Mauro Carvalho Chehab authored
It is useful to know if the driver load succeded. So, add a printk info there. While here, improve the .init debug printed message. Signed-off-by:
-
Mauro Carvalho Chehab authored
Cleanup the usecases of dprintk() by using pr_fmt() and replace printk by pr_foo(). Signed-off-by:
-
Mauro Carvalho Chehab authored
As we're about to convert this driver to use the new i2c binding way, let's first solve most coding style issues, in order to avoid mixing coding style changes with code changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
Change the lgdt330x_config documentation to use kernel-doc style. No functional changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit be7fd3c3 ("media: em28xx: Hauppauge DualHD second tuner functionality") removed the logic with sets the alternate for the DVB device. Without setting the right alternate, the device won't be able to submit URBs, and userspace fails with -EMSGSIZE: ERROR DMX_SET_PES_FILTER failed (PID = 0x2000): 90 Message too long Tested with Hauppauge HVR-950 model A1C0. Fixes: be7fd3c3 ("media: em28xx: Hauppauge DualHD second tuner functionality") Cc: Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Mauro Carvalho Chehab authored
Videobuf has been replaced by videobuf2. Now, no drivers use the videobuf-dvb helper module anymore. So, get rid of it. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This driver doesn't use videobuf-dvb. So, stop adding an unused struct and unused header on it. Signed-off-by:
-
Mauro Carvalho Chehab authored
There's no need to use coherent buffers there. So, let the DVB core do the allocation. That should give some performance gain outside x86. Signed-off-by:
-
Mauro Carvalho Chehab authored
There's a user-after-free there, if the frontend is attached via the new I2C way: [ 112.539806] usbcore: deregistering interface driver dvb_usb_dvbsky [ 112.568489] ================================================================== [ 112.568600] BUG: KASAN: use-after-free in dvb_unregister_frontend+0x18/0xb0 [dvb_core] [ 112.568610] Read of size 8 at addr ffff8803a6f61530 by task rmmod/2246 [ 112.568622] CPU: 0 PID: 2246 Comm: rmmod Not tainted 4.16.0-rc4+ #103 [ 112.568624] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 112.568625] Call Trace: [ 112.568631] dump_stack+0x5c/0x7c [ 112.568636] print_address_description+0x6a/0x270 [ 112.568640] kasan_report+0x258/0x380 [ 112.568657] ? dvb_unregister_frontend+0x18/0xb0 [dvb_core] [ 112.568673] dvb_unregister_frontend+0x18/0xb0 [dvb_core] [ 112.568681] dvb_usbv2_exit+0x156/0x4a0 [dvb_usb_v2] [ 112.568689] dvb_usbv2_disconnect+0xa0/0x140 [dvb_usb_v2] [ 112.568694] usb_unbind_interface+0xd8/0x3f0 [ 112.568700] device_release_driver_internal+0x1ce/0x2f0 [ 112.568705] driver_detach+0x66/0xc0 [ 112.568709] bus_remove_driver+0x86/0x150 [ 112.568713] usb_deregister+0x90/0x180 [ 112.568718] SyS_delete_module+0x293/0x330 [ 112.568721] ? free_module+0x330/0x330 [ 112.568725] ? _cond_resched+0x16/0x50 [ 112.568729] ? task_work_run+0x7d/0xd0 [ 112.568732] ? mem_cgroup_handle_over_high+0x1c/0xc0 [ 112.568736] ? free_module+0x330/0x330 [ 112.568740] do_syscall_64+0xe7/0x250 [ 112.568744] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 112.568747] RIP: 0033:0x7facafa272a7 [ 112.568749] RSP: 002b:00007fffdea14cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 112.568753] RAX: ffffffffffffffda RBX: 00007fffdea14d28 RCX: 00007facafa272a7 [ 112.568755] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005599557337c8 [ 112.568756] RBP: 0000559955733760 R08: 000000000000000a R09: 0000000000000000 [ 112.568758] R10: 00007facafaa0280 R11: 0000000000000206 R12: 00007fffdea14ef0 [ 112.568761] R13: 00007fffdea16eac R14: 0000559955733260 R15: 0000559955733760 [ 112.568808] Allocated by task 638: [ 112.568816] kasan_kmalloc+0xa0/0xd0 [ 112.568820] kmem_cache_alloc_trace+0x114/0x230 [ 112.568826] m88ds3103_probe+0x9a/0x643 [m88ds3103] [ 112.568830] i2c_device_probe+0x2e9/0x3c0 [ 112.568833] driver_probe_device+0x46e/0x6a0 [ 112.568836] bus_for_each_drv+0xd6/0x130 [ 112.568838] __device_attach+0x166/0x1f0 [ 112.568841] bus_probe_device+0xea/0x110 [ 112.568844] device_add+0x6a3/0x9f0 [ 112.568847] i2c_new_device+0x28f/0x5c0 [ 112.568861] dvb_module_probe+0x91/0x110 [dvb_core] [ 112.568867] dvbsky_s960c_attach+0x1c4/0x460 [dvb_usb_dvbsky] [ 112.568873] dvb_usbv2_probe+0x1191/0x1950 [dvb_usb_v2] [ 112.568877] usb_probe_interface+0x1b3/0x430 [ 112.568880] driver_probe_device+0x46e/0x6a0 [ 112.568882] __driver_attach+0xeb/0x110 [ 112.568885] bus_for_each_dev+0xe4/0x140 [ 112.568888] bus_add_driver+0x249/0x380 [ 112.568891] driver_register+0xc6/0x170 [ 112.568893] usb_register_driver+0xec/0x200 [ 112.568896] do_one_initcall+0x8f/0x1ee [ 112.568900] do_init_module+0xde/0x320 [ 112.568902] load_module+0x3ed0/0x4850 [ 112.568905] SYSC_finit_module+0x192/0x1c0 [ 112.568908] do_syscall_64+0xe7/0x250 [ 112.568911] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 112.568916] Freed by task 2246: [ 112.568923] __kasan_slab_free+0x136/0x180 [ 112.568925] kfree+0xa5/0x1e0 [ 112.568931] m88ds3103_remove+0x42/0x60 [m88ds3103] [ 112.568934] i2c_device_remove+0x72/0xd0 [ 112.568937] device_release_driver_internal+0x1ce/0x2f0 [ 112.568940] bus_remove_device+0x197/0x270 [ 112.568942] device_del+0x239/0x550 [ 112.568945] device_unregister+0x16/0x70 [ 112.568949] dvbsky_exit+0x4c/0x70 [dvb_usb_dvbsky] [ 112.568955] dvb_usbv2_disconnect+0x98/0x140 [dvb_usb_v2] [ 112.568958] usb_unbind_interface+0xd8/0x3f0 [ 112.568961] device_release_driver_internal+0x1ce/0x2f0 [ 112.568964] driver_detach+0x66/0xc0 [ 112.568967] bus_remove_driver+0x86/0x150 [ 112.568970] usb_deregister+0x90/0x180 [ 112.568973] SyS_delete_module+0x293/0x330 [ 112.568976] do_syscall_64+0xe7/0x250 [ 112.568979] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 112.568985] The buggy address belongs to the object at ffff8803a6f61100 which belongs to the cache kmalloc-2048 of size 2048 [ 112.568998] The buggy address is located 1072 bytes inside of 2048-byte region [ffff8803a6f61100, ffff8803a6f61900) [ 112.569008] The buggy address belongs to the page: [ 112.569015] page:ffffea000e9bd800 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 112.569025] flags: 0x17ffe000008100(slab|head) [ 112.569034] raw: 0017ffe000008100 0000000000000000 0000000000000000 00000001000f000f [ 112.569044] raw: ffffea000ee2d000 0000000500000005 ffff880407002a80 0000000000000000 [ 112.569053] page dumped because: kasan: bad access detected [ 112.569062] Memory state around the buggy address: [ 112.569070] ffff8803a6f61400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 112.569079] ffff8803a6f61480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 112.569088] >ffff8803a6f61500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 112.569095] ^ [ 112.569103] ffff8803a6f61580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 112.569112] ffff8803a6f61600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 112.569119] ================================================================== [ 112.569127] Disabling lock debugging due to kernel taint [ 112.571161] dvb_usb_v2: 'DVBSky S960CI:2-2' successfully deinitialized and disconnected Fix it by letting the dvb-usb-v2 core to know that the frontend was already removed. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of repeating countless times a complex logic, use the new dvb_module_probe()/dvb_module_release(), simplifying the module. That reduced about 15% at the module's size: text data bss dec hex filename 7083 1108 12 8203 200b old/drivers/media/usb/dvb-usb-v2/dvbsky.o 5817 1108 12 6937 1b19 new/drivers/media/usb/dvb-usb-v2/dvbsky.o Tested with a DVBSky S960C DVB-S2 tuner (0572:960c) Signed-off-by:
-
Daniel Scheller authored
Set DDBRIDGE_VERSION in ddbridge.h to 0.9.33-integrated to reflect the updated driver. Signed-off-by:
-
Daniel Scheller authored
Add needed logic into dvb_input_attach(), ddb_port_probe() and ddb_ports_init() to initialize and support these new cards. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Add PCI IDs and ddb_info for the new MCI-based MaxSX8 cards. Also add needed defines so the cards can be hooked up into ddbridge's probe and attach handling. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Implement frontend attachment as ddb_fe_attach_mci() into the ddbridge-max module. The MaxSX8 MCI cards are part of the Max card series and make use of the LNB controller driven by the already existing lnb functionality, so here's where this code belongs to. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
This adds initial support for the new MCI-based (micro-code interface) DD cards, with the first one being the MaxSX8 eight-tuner DVB-S/S2/S2X PCIe card. The MCI is basically a generalized interface implemented in the card's FPGA firmware and usable for all kind of cards, without the need to implement any demod/tuner drivers as this interface "hides" any I2C interface to the actual ICs, in other words any required driver is implemented in the card firmware. At this stage, the MCI interface is quite rudimentary with things like signal statistics reporting missing, but is already working to serve DVB streams to DVB applications. Missing functionality will be enabled over time. This implements only the ddbridge-mci sub-object and hooks it up to the Makefile so the object gets build. The upcoming commits hook this module into all other ddbridge parts where required, including device IDs etc. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
The Octopus V3 and Octopus Mini devices support set up of a dummy tuner mode on port 0 that will deliver a continuous data stream of 125MBytes per second while raising IRQs and filling the DMA buffers, which comes handy for some stress, PCIe link and IRQ handling testing. The dummy frontend is registered using dvb_dummy_fe's QAM dummy frontend. Set ddbridge.dummy_tuner to 1 to enable this on the supported cards. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Make the number of DMA buffers and their size configurable using module parameters. Being able to set these to a higher number might help on busy systems when handling overall high data rates without having to edit the driver sources and recompile things. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Currently, /sys/class/ddbridgeX/devid always reports 0 due to devid not being set at all. Set the devid field alongside while storing all other hardware ID data. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
A 188 byte gap has to be left between the writer and the consumer. This requires 2*188 bytes available to be able to write to the output buffers. So, change ddb_output_free() to report free bytes according to this rule. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Make sure to save IRQ states before taking the dma lock, as already done in it's input_work() counterpart. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Improve IRQ handling in the separated MSG/I2C and IO/TSDATA handlers by applying a mask for recognized bits immediately upon reading the IRQ mask from the hardware, so only the bits/IRQs that actually were set will be acked. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Currently, each IRQ requires one IRQ_HANDLE() line to call each IRQ handler that was set up. Add a IRQ_HANDLE_NIBBLE() and IRQ_HANDLE_BYTE() macro to call all handlers in blocks of four (_NIBBLE) or eight (_BYTE) handlers at a time, to make this construct more compact. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Introduce the ddb_irq_set() helper function (along with a matching prototype in ddbridge.h) to improve the set up of the IRQ handlers and handler_data, and rework storing this data into the ddb_link using a new ddb_irq struct. This also does the necessary rework of affected variables. And while at it, always do queue_work in input_handler() as there's not much of a difference to directly calling input_work if there's no ptr at input->redi, or queueing this call. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Instead of trying to manage IRQ numbers on itself, utilise the pci_irq_vector() function to do this, which will take care of correct IRQ numbering for MSI and non-MSI IRQs. While at it, request and enable MSI-X interrupts for hardware (boards and cards) that support this. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Introduce the ddb_msi_exit() helper to be used for cleaning up previously allocated MSI IRQ vectors. Deduplicates code and makes things look cleaner as for all cleanup work the CONFIG_PCI_MSI ifdeffery is only needed in the helper now. Also, replace the call to the deprecated pci_disable_msi() function with pci_free_irq_vectors(). Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
Daniel Scheller authored
Move the ddbridge module initialisation and cleanup code to ddbridge-core and set up the ddb_wq workqueue there, and create and destroy the ddb device class there aswell. Due to this, the prototypes for ddb_wq, ddb_class_create() and ddb_class_destroy() aren't required in ddbridge.h anymore, so remove them. Also, declare ddb_wq and the ddb_class_*() functions static. Picked up from the upstream dddvb-0.9.33 release. Signed-off-by:
-
