<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.

IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.

Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.

Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>

Keep them around until they are cleaned up by make clean. This
uses a bit more disk space, but makes it easier to debug any
problems with the kernel link process.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The supported targets for external modules are listed in the help target
a few lines below. Let's not have duplicated information in two places.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

'make tags' and friends create tag files in the top directory, but
people may manually create tag files in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts the old commit [1], which seems questionable to me.

It claimed 'make distclean' could not remove editor backup files,
but I believe KBUILD_OUTPUT or O= was set.

When O= is given, Kbuild should always work against $(objtree).
If O= is not given, $(objtree) and $(srctree) are the same, therefore
$(srctree) is cleaned up.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=dd47df980c02eb33833b2690b033c34fba2fa80dSigned-off-by: Masahiro Yamada <masahiroy@kernel.org>

Improve the readability slightly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Rename overlay-y to multi-dtb-y, which is a consistent name with
multi-obj-y. Also, use multi-search to avoid code duplication.

Introduce real-dtb-y, which is a consistent name with real-obj-y,
to contain primitive blobs compiled from *.dts. This is used to
calculate the list of *.dt.yaml files.

Set -@ to base DTB without using $(eval ).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The suffix-search macro hard-codes the suffix, '.o'.

Make it a parameter so that the multi-search and real-search macros
can be reused for foo-dtbs syntax introduced by commit 15d16d6d
("kbuild: Add generic rule to apply fdtoverlay").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

'cross_compiling' is defined by the top Makefile and available for
arch Makefiles to check whether it is a cross build or not. A good
thing is the variable name 'cross_compiling' is self-documenting.

This is a simple replacement for m68k, mips, sh, for which $(ARCH)
and $(SRCARCH) always match.

No functional change is intended for xtensa, either.

This is rather a fix for parisc because arch/parisc/Makefile defines
UTS_MATCHINE depending on CONFIG_64BIT, therefore cc-cross-prefix
is not working in Kconfig time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de>  # parisc
Acked-by: Max Filippov <jcmvbkbc@gmail.com> # xtensa

Commit 37744fee ("sh: remove sh5 support") removed the SUPERH64
support entirely.

Remove the left-over code from the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

The pattern prefixed with '/' matches files in the same directory,
but not ones in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>

LANG gives a weak default to each LC_* in case it is not explicitly
defined. LC_ALL, if set, overrides all other LC_* variables.

  LANG  <  LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ...  <  LC_ALL

This is why documentation such as [1] suggests to set LC_ALL in build
scripts to get the deterministic result.

LANG=C is not strong enough to override LC_* that may be set by end
users.

[1]: https://reproducible-builds.org/docs/locales/Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Matthias Maennich <maennich@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, -Wunused-but-set-variable is only supported by GCC so it is
disabled unconditionally in a GCC only block (it is enabled with W=1).
clang currently has its implementation for this warning in review so
preemptively move this statement out of the GCC only block and wrap it
with cc-disable-warning so that both compilers function the same.

Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D100581Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

We maintain .gitignore and Makefiles so build artifacts are properly
ignored by Git, and cleaned up by 'make clean'. However, the code is
always changing; generated files are often moved to another directory,
or removed when they become unnecessary. Such garbage files tend to be
left over in the source tree because people usually git-pull without
cleaning the tree.

This is not only the noise for 'git status', but also a build issue
in some cases.

One solution is to remove a stale file like commit 223c24a7 ("kbuild:
Automatically remove stale <linux/version.h> file") did. Such workaround
should be removed after a while, but we forget about that if we scatter
the workaround code in random places.

So, this commit adds a new script to collect cleanings of stale files.

As a start point, move the code in arch/arm/boot/compressed/Makefile
into this script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If the timestamp of the .config file is updated, config_data.gz is
regenerated, then vmlinux is re-linked. This occurs even if the content
of the .config has not changed at all.

This issue was mitigated by commit 67424f61 ("kconfig: do not write
.config if the content is the same"); Kconfig does not update the
.config when it ends up with the identical configuration.

The issue is remaining when the .config is created by *_defconfig with
some config fragment(s) applied on top.

This is typical for powerpc and mips, where several *_defconfig targets
are constructed by using merge_config.sh.

One workaround is to have the copy of the .config. The filechk rule
updates the copy, kernel/config_data, by checking the content instead
of the timestamp.

With this commit, the second run with the same configuration avoids
the needless rebuilds.

  $ make ARCH=mips defconfig all
   [ snip ]
  $ make ARCH=mips defconfig all
  *** Default configuration is based on target '32r2el_defconfig'
  Using ./arch/mips/configs/generic_defconfig as base
  Merging arch/mips/configs/generic/32r2.config
  Merging arch/mips/configs/generic/el.config
  Merging ./arch/mips/configs/generic/board-boston.config
  Merging ./arch/mips/configs/generic/board-ni169445.config
  Merging ./arch/mips/configs/generic/board-ocelot.config
  Merging ./arch/mips/configs/generic/board-ranchu.config
  Merging ./arch/mips/configs/generic/board-sead-3.config
  Merging ./arch/mips/configs/generic/board-xilfpga.config
  #
  # configuration written to .config
  #
    SYNC    include/config/auto.conf
    CALL    scripts/checksyscalls.sh
    CALL    scripts/atomic/check-atomics.sh
    CHK     include/generated/compile.h
    CHK     include/generated/autoksyms.h
Reported-by: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

modules.builtin used to be created in every directory.

Since commit 8b41fc44 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), modules.builtin is created only
in the top directory.

Add the '/' prefix so that it matches to only the modules.builtin located
in the top directory.

It has been more than one year since that change. I hope this will not
flood 'Untracked files' of 'git status'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

For consistency, move tags and TAGS close to the cscope and GNU Global
patterns.

I removed the '/' prefix in case somebody wants to manually create tag
files in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

timeconst.h and hz.bc used to exist in kernel/.

Commit 5cee9645 ("time/timers: Move all time(r) related files into
kernel/time") moved them to kernel/time/.

Commit 0a227985 ("time: Move timeconst.h into include/generated")
moved timeconst.h to include/generated/ and removed hz.bc .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The current .gitignore intends to ignore everything under usr/include/
except .gitignore and Makefile.

A cleaner solution is to use a pattern suffixed with '/', which matches
only directories. It works well here because all the exported headers
are located in sub-directories, like <linux/*.h>, <asm/*.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

(shipped source) is a stale comment.

Since commit 833e6224 ("genksyms: generate lexer and parser during
build instead of shipping"), there is no source file to be shipped in
this directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

cmd_shipped uses 'cat' instead of 'cp' for copying a file. The reason
is explained in the commit [1], but it was in the pre-git era.

  $ touch a
  $ chmod -w a
  $ cp a b
  $ cp a b
  cp: cannot create regular file 'b': Permission denied

Add comments so that you can see the reason without looking into
the history.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=a70dba8086160449cc94c5bdaff78419b6b8e3c8Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Many architectures duplicate similar shell scripts.

This commit converts sparc to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Many architectures duplicate similar shell scripts.

This commit converts sparc to use scripts/syscalltbl.sh. This also
unifies syscall_table_64.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Many architectures duplicate similar shell scripts.

This commit converts sh to use scripts/syscallhdr.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Many architectures duplicate similar shell scripts.

This commit converts sh to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ext4 updates from Ted Ts'o:
 "New features for ext4 this cycle include support for encrypted
  casefold, ensure that deleted file names are cleared in directory
  blocks by zeroing directory entries when they are unlinked or moved as
  part of a hash tree node split. We also improve the block allocator's
  performance on a freshly mounted file system by prefetching block
  bitmaps.

  There are also the usual cleanups and bug fixes, including fixing a
  page cache invalidation race when there is mixed buffered and direct
  I/O and the block size is less than page size, and allow the dax flag
  to be set and cleared on inline directories"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
  ext4: wipe ext4_dir_entry2 upon file deletion
  ext4: Fix occasional generic/418 failure
  fs: fix reporting supported extra file attributes for statx()
  ext4: allow the dax flag to be set and cleared on inline directories
  ext4: fix debug format string warning
  ext4: fix trailing whitespace
  ext4: fix various seppling typos
  ext4: fix error return code in ext4_fc_perform_commit()
  ext4: annotate data race in jbd2_journal_dirty_metadata()
  ext4: annotate data race in start_this_handle()
  ext4: fix ext4_error_err save negative errno into superblock
  ext4: fix error code in ext4_commit_super
  ext4: always panic when errors=panic is specified
  ext4: delete redundant uptodate check for buffer
  ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
  ext4: make prefetch_block_bitmaps default
  ext4: add proc files to monitor new structures
  ext4: improve cr 0 / cr 1 group scanning
  ext4: add MB_NUM_ORDERS macro
  ext4: add mballoc stats proc file
  ...

Pull dlm updates from David Teigland:
 "This includes more dlm networking cleanups and improvements for making
  dlm shutdowns more robust"

* tag 'dlm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: fix missing unlock on error in accept_from_sock()
  fs: dlm: add shutdown hook
  fs: dlm: flush swork on shutdown
  fs: dlm: remove unaligned memory access handling
  fs: dlm: check on minimum msglen size
  fs: dlm: simplify writequeue handling
  fs: dlm: use GFP_ZERO for page buffer
  fs: dlm: change allocation limits
  fs: dlm: add check if dlm is currently running
  fs: dlm: add errno handling to check callback
  fs: dlm: set subclass for othercon sock_mutex
  fs: dlm: set connected bit after accept
  fs: dlm: fix mark setting deadlock
  fs: dlm: fix debugfs dump

Pull fuse updates from Miklos Szeredi:

 - Fix a page locking bug in write (introduced in 2.6.26)

 - Allow sgid bit to be killed in setacl()

 - Miscellaneous fixes and cleanups

* tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  cuse: simplify refcount
  cuse: prevent clone
  virtiofs: fix userns
  virtiofs: remove useless function
  virtiofs: split requests that exceed virtqueue size
  virtiofs: fix memory leak in virtio_fs_probe()
  fuse: invalidate attrs when page writeback completes
  fuse: add a flag FUSE_SETXATTR_ACL_KILL_SGID to kill SGID
  fuse: extend FUSE_SETXATTR request
  fuse: fix matching of FUSE_DEV_IOC_CLONE command
  fuse: fix a typo
  fuse: don't zero pages twice
  fuse: fix typo for fuse_conn.max_pages comment
  fuse: fix write deadlock

Pull overlayfs update from Miklos Szeredi:

 - Fix a regression introduced in 5.2 that resulted in valid overlayfs
   mounts being rejected with ELOOP (Too many levels of symbolic links)

 - Fix bugs found by various tools

 - Miscellaneous improvements and cleanups

* tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: add debug print to ovl_do_getxattr()
  ovl: invalidate readdir cache on changes to dir with origin
  ovl: allow upperdir inside lowerdir
  ovl: show "userxattr" in the mount data
  ovl: trivial typo fixes in the file inode.c
  ovl: fix misspellings using codespell tool
  ovl: do not copy attr several times
  ovl: remove ovl_map_dev_ino() return value
  ovl: fix error for ovl_fill_super()
  ovl: fix missing revert_creds() on error path
  ovl: fix leaked dentry
  ovl: restrict lower null uuid for "xino=auto"
  ovl: check that upperdir path is not on a read-only mount
  ovl: plumb through flush method

Merge misc updates from Andrew Morton:
 "A few misc subsystems and some of MM.

  175 patches.

  Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
  ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
  kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
  mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
  pagealloc, and memory-failure)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits)
  mm/memory-failure: unnecessary amount of unmapping
  mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
  mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
  net: page_pool: use alloc_pages_bulk in refill code path
  net: page_pool: refactor dma_map into own function page_pool_dma_map
  SUNRPC: refresh rq_pages using a bulk page allocator
  SUNRPC: set rq_page_end differently
  mm/page_alloc: inline __rmqueue_pcplist
  mm/page_alloc: optimize code layout for __alloc_pages_bulk
  mm/page_alloc: add an array-based interface to the bulk page allocator
  mm/page_alloc: add a bulk page allocator
  mm/page_alloc: rename alloced to allocated
  mm/page_alloc: duplicate include linux/vmalloc.h
  mm, page_alloc: avoid page_to_pfn() in move_freepages()
  mm/Kconfig: remove default DISCONTIGMEM_MANUAL
  mm: page_alloc: dump migrate-failed pages
  mm/mempolicy: fix mpol_misplaced kernel-doc
  mm/mempolicy: rewrite alloc_pages_vma documentation
  mm/mempolicy: rewrite alloc_pages documentation
  mm/mempolicy: rename alloc_pages_current to alloc_pages
  ...

Pull pin control updates from Linus Walleij:
 "There is a lot going on!

  Core changes:

   - A semantic change to handle pinmux and pinconf in explicit order
     while up until now we depended on the semantic order in the device
     tree. The device tree is a functional programming language and does
     not imply any order, so the right thing is for the pin control core
     to provide these semantics.

   - Add a new pinmux-select debugfs file which makes it possible to go
     in and select functions for a pin manually (iteratively, at the
     prompt) for debugging purposes.

   - Fixes to gpio regmap handling for a new pin control driver making
     use of regmap-gpio.

   - Use octal permissions on debugfs files.

  New drivers:

   - A massive rewrite of the former custom pin control driver for MIPS
     Broadcom devices to instead use the pin control subsystem. New pin
     control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
     BCM63268 and BCM6318 SoC variants are implemented.

   - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
     in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
     supported.

   - Support for the Rockchip RK3568/RK3566 pin controller.

   - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.

   - Support for Mediatek MTK8195.

   - Add a new Xilinx ZynqMP pin control driver.

  Driver improvements and non-urgent fixes:

   - Modularization and improvements of the Rockchip drivers.

   - Some new pins added to the description of new Renesas SoCs.

   - Clarifications of the GPIO base calculation in the Intel driver.

   - Fix the function names for the MPP54 and MPP55 pins in the Armada
     CP110 pin controller.

   - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.

   - Support for ACPI probing of the Qualcomm SC8180x.

   - Fix interrupt clear status on rockchip

   - Fix some missing pins on the Ingenic JZ4770, some semantic fixes
     for the behaviour of the Ingenic pin controller. Add DMIC pins for
     JZ4780, X1000, X1500 and X1830.

   - A slew of janitorial like of_node_put() calls"

* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: Add Xilinx ZynqMP pinctrl driver support
  firmware: xilinx: Add pinctrl support
  pinctrl: rockchip: do coding style for mux route struct
  pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
  pinctrl: Introduce MODE group in enum pin_config_param
  pinctrl: Keep enum pin_config_param ordered by name
  dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
  pinctrl: core: Fix kernel doc string for pin_get_name()
  pinctrl: mediatek: use spin lock in mtk_rmw
  pinctrl: add drive for I2C related pins on MT8195
  pinctrl: add pinctrl driver on mt8195
  dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
  pinctrl: Ingenic: Add pinctrl driver for X2000.
  pinctrl: Ingenic: Add pinctrl driver for JZ4775.
  pinctrl: Ingenic: Add pinctrl driver for JZ4755.
  pinctrl: Ingenic: Add pinctrl driver for JZ4750.
  pinctrl: Ingenic: Add pinctrl driver for JZ4730.
  dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
  pinctrl: Ingenic: Reformat the code.
  pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
  ...

Pull i2c updates from Wolfram Sang:

 - new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit

 - bigger refactoring for the MPC driver

 - support for full software nodes - no need to work around with only
   properties anymore

 - we now have 'devm_i2c_add_adapter', too

 - sub-system wide fixes for the RPM refcounting problem which often
   caused a leak when an error was encountered during probe

 - the rest is usual driver updates and improvements

* 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching
  i2c: mediatek: Fix wrong dma sync flag
  i2c: mediatek: Fix send master code at more than 1MHz
  i2c: sh7760: fix IRQ error path
  i2c: i801: Add support for Intel Alder Lake PCH-M
  i2c: core: Fix spacing error by checkpatch
  i2c: s3c2410: simplify getting of_device_id match data
  i2c: nomadik: Fix space errors
  i2c: iop3xx: Fix coding style issues
  i2c: amd8111: Fix coding style issues
  i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()
  i2c: mpc: Use device_get_match_data() helper
  i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery
  i2c: mpc: Use devm_clk_get_optional()
  i2c: mpc: Update license and copyright
  i2c: mpc: Interrupt driven transfer
  i2c: sh7760: add IRQ check
  i2c: rcar: add IRQ check
  i2c: mlxbf: add IRQ check
  i2c: jz4780: add IRQ check
  ...

Pull HID updates from Jiri Kosina:

 - Surface Aggregator Module support from Maximilian Luz

 - Apple Magic Mouse 2 support from John Chen

 - Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode
   from Hans de Goede

 - Thinkpad X1 Tablet keyboard support from Hans de Goede

 - Support for FTDI FT260 I2C host adapter from Michael Zaidman

 - other various small device-specific quirks, fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
  HID: wacom: Setup pen input capabilities to the targeted tools
  HID: hid-sensor-hub: Move 'hsdev' description to correct struct definition
  HID: hid-sensor-hub: Remove unused struct member 'quirks'
  HID: wacom_sys: Demote kernel-doc abuse
  HID: hid-sensor-custom: Remove unused variable 'ret'
  HID: hid-uclogic-params: Ensure function names are present and correct in kernel-doc headers
  HID: hid-uclogic-rdesc: Kernel-doc is for functions and structs
  HID: hid-logitech-hidpp: Fix conformant kernel-doc header and demote abuses
  HID: hid-picolcd_core: Remove unused variable 'ret'
  HID: hid-kye: Fix incorrect function name for kye_tablet_enable()
  HID: hid-core: Fix incorrect function name in header
  HID: hid-alps: Correct struct misnaming
  HID: usbhid: hid-pidff: Demote a couple kernel-doc abuses
  HID: usbhid: Repair a formatting issue in a struct description
  HID: hid-thrustmaster: Demote a bunch of kernel-doc abuses
  HID: input: map battery capacity (00850065)
  HID: magicmouse: fix reconnection of Magic Mouse 2
  HID: magicmouse: fix 3 button emulation of Mouse 2
  HID: magicmouse: add Apple Magic Mouse 2 support
  HID: lenovo: Add support for Thinkpad X1 Tablet Thin keyboard
  ...

Pull sound updates from Takashi Iwai:
 "No surprises in this development cycle, and most of work is about the
  fixes and the improvements of the existing code, while a new LED
  control layer and a few new drivers have been introduced.

  Here are some highlights:

  Core:
   - A common mute-LED framework was introduced. It is used by HD-audio
     for now, more adaption will follow later. The former "Mic Mute-LED
     Mode" mixer control has been replaced with the corresponding sysfs
     now.
   - User-control management was changed to count consumed bytes instead
     of capping by number of elements; this will allow more controls in
     the normal usage pattern while avoiding the possible memory
     exhaustion DoS

  ASoC:
   - Continued refactoring and cleanups in ASoC core and generic card
     drivers
   - Wide range of small cppcheck and warning fixes
   - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
     accessory detection, and Realtek RT1019, RT1316, RT711 and RT715

  USB-audio:
   - Continued improvements and fixes of the implicit feedback mode,
     including better support for Pioneer and Roland/BOSS devices

  HD-audio:
   - Default back to non-buffer preallocation on x86
   - Cirrus codec improvements, more quirks for Realtek codecs

  Others:
   - New virtio sound driver
   - FireWire Bebob updates"

* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
  ALSA: hda/conexant: Re-order CX5066 quirk table entries
  ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
  ALSA: hda/realtek: Re-order ALC662 quirk table entries
  ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
  ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
  ALSA: usb-audio: Remove redundant assignment to len
  ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
  ALSA: virtio: fix kernel-doc
  ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  ALSA: sb: Fix two use after free in snd_sb_qsound_build
  ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
  ...

Pull more drm updates from Dave Airlie:
 "Looks like I missed a tegra feature request for next, but should still
  be fine since it's pretty self contained.

  Apart from that got a set of i915 and amdgpu fixes as per usual along
  with a few misc fixes.

  tegra:
   - Tegra186 hardware cursor support
   - better capability reporting for different SoC
   - better framebuffer modifier support
   - host1x fixes

  ttm:
   - fix unswappable BO handling

  efifb:
   - check for PCI before using it

  amdgpu:
   - Fixes for Aldebaran
   - Display LTTPR fixes
   - eDP fixes
   - Fixes for Vangogh
   - RAS fixes
   - ASPM support
   - Renoir SMU fixes
   - Modifier fixes
   - Misc code cleanups
   - Freesync fixes

  i915:
   - Several fixes to GLK handling in recent display refactoring
   - Rare watchdog timer race fix
   - Cppcheck redundant condition fix
   - Overlay error code propagation fix
   - Documentation fix
   - gvt: Remove one unused function warning
   - gvt: Fix intel_gvt_init_device() return type
   - gvt: Remove one duplicated register accessible check"

* tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm: (111 commits)
  efifb: Check efifb_pci_dev before using it
  drm/i915: Fix docbook descriptions for i915_gem_shrinker
  drm/i915: fix an error code in intel_overlay_do_put_image()
  drm/i915/display/psr: Fix cppcheck warnings
  drm/i915: Disable LTTPR detection on GLK once again
  drm/i915: Restore lost glk ccs w/a
  drm/i915: Restore lost glk FBC 16bpp w/a
  drm/i915: Take request reference before arming the watchdog timer
  drm/ttm: fix error handling if no BO can be swapped out v4
  drm/i915/gvt: Remove duplicated register accessible check
  drm/amdgpu/gmc9: remove dummy read workaround for newer chips
  drm/amdgpu: Add mem sync flag for IB allocated by SA
  drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran
  drm/amdgpu: Reset RAS error count and status regs
  Revert "drm/amdgpu: workaround the TMR MC address issue (v2)"
  drm/amd/display: 3.2.132
  drm/amd/display: [FW Promotion] Release 0.0.62
  drm/amd/display: add helper for enabling mst stream features
  drm/amd/display: Report Proper Quantization Range in AVI Infoframe
  drm/amd/display: Fix call to pass bpp in 16ths of a bit
  ...

Pull module updates from Jessica Yu:
 "Fix an age old bug involving jump_calls and static_labels when
  CONFIG_MODULE_UNLOAD=n.

  When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
  normally the __exit sections of a module are not loaded at all.
  However, dynamic code patching (jump_label, static_call, alternatives)
  can have sites in __exit sections even if __exit is never executed.

  Reported by Peter Zijlstra:
     'Alternatives, jump_labels and static_call all can have relocations
      into __exit code. Not loading it at all would be BAD.'

  Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
  and discard them after init"

* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...

Pull Xtensa updates from Max Filippov:

 - switch to generic syscall generation scripts

 - new GDBIO implementation for xtensa semihosting interface

 - various small code fixes and cleanups

 - a few typo fixes in comments and Kconfig help text

* tag 'xtensa-20210429' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: add GDBIO implementation to semihosting interface
  xtensa: ISS: split simcall implementation from semihosting interface
  xtensa: simcall.h: Change compitible to compatible
  xtensa: Couple of typo fixes
  xtensa: drop extraneous register load from initialize_mmu
  xtensa: fix pgprot_noncached assumptions
  xtensa: simplify coherent_kvaddr logic
  xtensa: syscalls: switch to generic syscallhdr.sh
  xtensa: syscalls: switch to generic syscalltbl.sh
  xtensa: stop filling syscall array with sys_ni_syscall
  xtensa: remove unneeded export in boot-elf/Makefile
  xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig
  xtensa: fix warning comparing pointer to 0
  xtensa: fix spelling mistake in Kconfig "wont" -> "won't"

It appears that unmap_mapping_range() actually takes a 'size' as its third
argument rather than a location, the current calling fashion causes
unnecessary amount of unmapping to occur.

Link: https://lkml.kernel.org/r/20210420002821.2749748-1-jane.chu@oracle.com
Fixes: 6100e34b ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are a couple of kernel-doc comments in include/linux/mmzone.h but
they have minor formatting issues that would cause kernel-doc warnings.

Fix the formatting of those comments, add missing Return: descriptions and
link include/linux/mmzone.h to Documentation/core-api/mm-api.rst

Link: https://lkml.kernel.org/r/20210426141927.1314326-2-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>