This reverts commit 6ebe94ba.

The patch "nios2: Convert __pte_free_tlb() to use ptdescs" was supposed
to go together with a patchset that Vishal Moola had planned taking it
through the mm tree. By just having this patch, all NIOS2 builds are
broken.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull objtool updates from Ingo Molar:
 "Build footprint & performance improvements:

   - Reduce memory usage with CONFIG_DEBUG_INFO=y

     In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
     DWARF creates almost 200 million relocations, ballooning objtool's
     peak heap usage to 53GB. These patches reduce that to 25GB.

     On a distro-type kernel with kernel IBT enabled, they reduce
     objtool's peak heap usage from 4.2GB to 2.8GB.

     These changes also improve the runtime significantly.

  Debuggability improvements:

   - Add the unwind_debug command-line option, for more extend unwinding
     debugging output
   - Limit unreachable warnings to once per function
   - Add verbose option for disassembling affected functions
   - Include backtrace in verbose mode
   - Detect missing __noreturn annotations
   - Ignore exc_double_fault() __noreturn warnings
   - Remove superfluous global_noreturns entries
   - Move noreturn function list to separate file
   - Add __kunit_abort() to noreturns

  Unwinder improvements:

   - Allow stack operations in UNWIND_HINT_UNDEFINED regions
   - drm/vmwgfx: Add unwind hints around RBP clobber

  Cleanups:

   - Move the x86 entry thunk restore code into thunk functions
   - x86/unwind/orc: Use swap() instead of open coding it
   - Remove unnecessary/unused variables

  Fixes for modern stack canary handling"

* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
  objtool: Skip reading DWARF section data
  objtool: Free insns when done
  objtool: Get rid of reloc->rel[a]
  objtool: Shrink elf hash nodes
  objtool: Shrink reloc->sym_reloc_entry
  objtool: Get rid of reloc->jump_table_start
  objtool: Get rid of reloc->addend
  objtool: Get rid of reloc->type
  objtool: Get rid of reloc->offset
  objtool: Get rid of reloc->idx
  objtool: Get rid of reloc->list
  objtool: Allocate relocs in advance for new rela sections
  objtool: Add for_each_reloc()
  objtool: Don't free memory in elf_close()
  objtool: Keep GElf_Rel[a] structs synced
  objtool: Add elf_create_section_pair()
  objtool: Add mark_sec_changed()
  objtool: Fix reloc_hash size
  objtool: Consolidate rel/rela handling
  ...

Pull x86 mm updates from Ingo Molnar:

 - Remove Xen-PV leftovers from init_32.c

 - Fix __swp_entry_to_pte() warning splat for Xen PV guests, triggered
   on CONFIG_DEBUG_VM_PGTABLE=y

* tag 'x86-mm-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove Xen-PV leftovers from init_32.c
  x86/mm: Fix __swp_entry_to_pte() for Xen PV guests

Pull perf events updates from Ingo Molnar:

 - Rework & fix the event forwarding logic by extending the core
   interface.

   This fixes AMD PMU events that have to be forwarded from the
   core PMU to the IBS PMU.

 - Add self-tests to test AMD IBS invocation via core PMU events

 - Clean up Intel FixCntrCtl MSR encoding & handling

* tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Re-instate the linear PMU search
  perf/x86/intel: Define bit macros for FixCntrCtl MSR
  perf test: Add selftest to test IBS invocation via core pmu events
  perf/core: Remove pmu linear searching code
  perf/ibs: Fix interface via core pmu events
  perf/core: Rework forwarding of {task|cpu}-clock events

Pull locking updates from Ingo Molnar:

 - Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()

   The cmpxchg128() family of functions is basically & functionally the
   same as cmpxchg_double(), but with a saner interface.

   Instead of a 6-parameter horror that forced u128 - u64/u64-halves
   layout details on the interface and exposed users to complexity,
   fragility & bugs, use a natural 3-parameter interface with u128
   types.

 - Restructure the generated atomic headers, and add kerneldoc comments
   for all of the generic atomic{,64,_long}_t operations.

   The generated definitions are much cleaner now, and come with
   documentation.

 - Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
   taking multiple locks of the same type.

   This gets rid of one use of lockdep_set_novalidate_class() in the
   bcache code.

 - Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
   shadowing generating garbage code on Clang on certain ARM builds.

* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
  percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
  locking/atomic: treewide: delete arch_atomic_*() kerneldoc
  locking/atomic: docs: Add atomic operations to the driver basic API documentation
  locking/atomic: scripts: generate kerneldoc comments
  docs: scripts: kernel-doc: accept bitwise negation like ~@var
  locking/atomic: scripts: simplify raw_atomic*() definitions
  locking/atomic: scripts: simplify raw_atomic_long*() definitions
  locking/atomic: scripts: split pfx/name/sfx/order
  locking/atomic: scripts: restructure fallback ifdeffery
  locking/atomic: scripts: build raw_atomic_long*() directly
  locking/atomic: treewide: use raw_atomic*_<op>()
  locking/atomic: scripts: add trivial raw_atomic*_<op>()
  locking/atomic: scripts: factor out order template generation
  locking/atomic: scripts: remove leftover "${mult}"
  locking/atomic: scripts: remove bogus order parameter
  locking/atomic: xtensa: add preprocessor symbols
  locking/atomic: x86: add preprocessor symbols
  locking/atomic: sparc: add preprocessor symbols
  locking/atomic: sh: add preprocessor symbols
  ...

Pull scheduler updates from Ingo Molnar:
 "Scheduler SMP load-balancer improvements:

   - Avoid unnecessary migrations within SMT domains on hybrid systems.

     Problem:

        On hybrid CPU systems, (processors with a mixture of
        higher-frequency SMT cores and lower-frequency non-SMT cores),
        under the old code lower-priority CPUs pulled tasks from the
        higher-priority cores if more than one SMT sibling was busy -
        resulting in many unnecessary task migrations.

     Solution:

        The new code improves the load balancer to recognize SMT cores
        with more than one busy sibling and allows lower-priority CPUs
        to pull tasks, which avoids superfluous migrations and lets
        lower-priority cores inspect all SMT siblings for the busiest
        queue.

   - Implement the 'runnable boosting' feature in the EAS balancer:
     consider CPU contention in frequency, EAS max util & load-balance
     busiest CPU selection.

     This improves CPU utilization for certain workloads, while leaves
     other key workloads unchanged.

  Scheduler infrastructure improvements:

   - Rewrite the scheduler topology setup code by consolidating it into
     the build_sched_topology() helper function and building it
     dynamically on the fly.

   - Resolve the local_clock() vs. noinstr complications by rewriting
     the code: provide separate sched_clock_noinstr() and
     local_clock_noinstr() functions to be used in instrumentation code,
     and make sure it is all instrumentation-safe.

  Fixes:

   - Fix a kthread_park() race with wait_woken()

   - Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
       - Fix UP PREEMPT bug by unifying the SMP and UP implementations
       - Fix task_struct::saved_state handling

   - Fix various rq clock update bugs, unearthed by turning on the rq
     clock debugging code.

   - Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
     by creating enough cgroups, by removing the warnign and restricting
     window size triggers to PSI file write-permission or
     CAP_SYS_RESOURCE.

   - Propagate SMT flags in the topology when removing degenerate domain

   - Fix grub_reclaim() calculation bug in the deadline scheduler code

   - Avoid resetting the min update period when it is unnecessary, in
     psi_trigger_destroy().

   - Don't balance a task to its current running CPU in load_balance(),
     which was possible on certain NUMA topologies with overlapping
     groups.

   - Fix the sched-debug printing of rq->nr_uninterruptible

  Cleanups:

   - Address various -Wmissing-prototype warnings, as a preparation to
     (maybe) enable this warning in the future.

   - Remove unused code

   - Mark more functions __init

   - Fix shadow-variable warnings"

* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
  sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
  sched/core: Fixed missing rq clock update before calling set_rq_offline()
  sched/deadline: Update GRUB description in the documentation
  sched/deadline: Fix bandwidth reclaim equation in GRUB
  sched/wait: Fix a kthread_park race with wait_woken()
  sched/topology: Mark set_sched_topology() __init
  sched/fair: Rename variable cpu_util eff_util
  arm64/arch_timer: Fix MMIO byteswap
  sched/fair, cpufreq: Introduce 'runnable boosting'
  sched/fair: Refactor CPU utilization functions
  cpuidle: Use local_clock_noinstr()
  sched/clock: Provide local_clock_noinstr()
  x86/tsc: Provide sched_clock_noinstr()
  clocksource: hyper-v: Provide noinstr sched_clock()
  clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
  x86/vdso: Fix gettimeofday masking
  math64: Always inline u128 version of mul_u64_u64_shr()
  s390/time: Provide sched_clock_noinstr()
  loongarch: Provide noinstr sched_clock_read()
  ...

Pull SGX update from Borislav Petkov:

 - A fix to avoid using a list iterator variable after the loop it is
   used in

* tag 'x86_sgx_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Avoid using iterator after loop in sgx_mmu_notifier_release()

Pull x86 SEV updates from Borislav Petkov:

 - Some SEV and CC platform helpers cleanup and simplifications now that
   the usage patterns are becoming apparent

[ I'm sure I'm the only one that has gets confused by all the TLAs, but
  in case there are others: here SEV is AMD's "Secure Encrypted
  Virtualization" and CC is generic "Confidential Computing".

  There's also Intel SGX (Software Guard Extensions) and TDX (Trust
  Domain Extensions), along with all the vendor memory encryption
  extensions (SME, TSME, TME, and WTF).

  And then we have arm64 with RMA and CCA, and I probably forgot another
  dozen or so related acronyms    - Linus ]

* tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/coco: Get rid of accessor functions
  x86/sev: Get rid of special sev_es_enable_key
  x86/coco: Mark cc_platform_has() and descendants noinstr

Pull x86 mtrr updates from Borislav Petkov:
 "A serious scrubbing of the MTRR code including adding a new map
  mechanism in order to look up the memory type of a region easily.

  Also address memory range lookup issues like returning an invalid
  memory type. Furthermore, this handles the decoupling of PAT from MTRR
  more naturally.

  All work by Juergen Gross"

* tag 'x86_mtrr_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Set default memory type for PV guests to WB
  x86/mtrr: Unify debugging printing
  x86/mtrr: Remove unused code
  x86/mm: Only check uniform after calling mtrr_type_lookup()
  x86/mtrr: Don't let mtrr_type_lookup() return MTRR_TYPE_INVALID
  x86/mtrr: Use new cache_map in mtrr_type_lookup()
  x86/mtrr: Add mtrr=debug command line option
  x86/mtrr: Construct a memory map with cache modes
  x86/mtrr: Add get_effective_type() service function
  x86/mtrr: Allocate mtrr_value array dynamically
  x86/mtrr: Move 32-bit code from mtrr.c to legacy.c
  x86/mtrr: Have only one set_mtrr() variant
  x86/mtrr: Replace vendor tests in MTRR code
  x86/xen: Set MTRR state when running as Xen PV initial domain
  x86/hyperv: Set MTRR state when running as SEV-SNP Hyper-V guest
  x86/mtrr: Support setting MTRR state for software defined MTRRs
  x86/mtrr: Replace size_or_mask and size_and_mask with a much easier concept
  x86/mtrr: Remove physical address size calculation

Pull misc x86 updates from Borislav Petkov:

 - Remove the local symbols prefix of the get/put_user() exception
   handling symbols so that tools do not get confused by the presence of
   code belonging to the wrong symbol/not belonging to any symbol

 - Improve csum_partial()'s performance

 - Some improvements to the kcpuid tool

* tag 'x86_misc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Make get/put_user() exception handling a visible symbol
  x86/csum: Fix clang -Wuninitialized in csum_partial()
  x86/csum: Improve performance of `csum_partial`
  tools/x86/kcpuid: Add .gitignore
  tools/x86/kcpuid: Dump the correct CPUID function in error

Pull x86 microcode loader updates from Borislav Petkov:

 - Load late on both SMT threads on AMD, just like it is being done in
   the early loading procedure

  - Cleanups

* tag 'x86_microcode_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Load late on both threads too
  x86/microcode/amd: Remove unneeded pointer arithmetic
  x86/microcode/AMD: Get rid of __find_equiv_id()

Pull arm documentation move from Jonathan Corbet:
 "Move the Arm architecture documentation under Documentation/arch/.

  This brings some order to the documentation directory, declutters the
  top-level directory, and makes the documentation organization more
  closely match that of the source"

* tag 'docs-arm-move' of git://git.lwn.net/linux:
  dt-bindings: Update Documentation/arm references
  docs: update some straggling Documentation/arm references
  crypto: update some Arm documentation references
  mips: update a reference to a moved Arm Document
  arm64: Update Documentation/arm references
  arm: update in-source documentation references
  arm: docs: Move Arm documentation to Documentation/arch/

Pull documentation updates from Jonathan Corbet:
 "It's been a relatively calm cycle in docsland. We do have:

   - Some initial page-table documentation from Linus (the other Linus)

   - Regression-handling documentation improvements from Thorsten

   - Addition of kerneldoc documentation for the ERR_PTR() and related
     macros from James Seo

  ... and the usual collection of fixes and updates"

* tag 'docs-6.5' of git://git.lwn.net/linux:
  docs: consolidate storage interfaces
  Documentation: update git configuration for Link: tag
  Documentation: KVM: make corrections to vcpu-requests.rst
  Documentation: KVM: make corrections to ppc-pv.rst
  Documentation: KVM: make corrections to locking.rst
  Documentation: KVM: make corrections to halt-polling.rst
  Documentation: virt: correct location of haltpoll module params
  Documentation/mm: Initial page table documentation
  docs: crypto: async-tx-api: fix typo in struct name
  docs/doc-guide: Clarify how to write tables
  docs: handling-regressions: rework section about fixing procedures
  docs: process: fix a typoed cross-reference
  docs: submitting-patches: Discuss interleaved replies
  MAINTAINERS: direct process doc changes to a dedicated ML
  Documentation: core-api: Add error pointer functions to kernel-api
  err.h: Add missing kerneldocs for error pointer functions
  Documentation: conf.py: Add __force to c_id_attributes
  docs: clarify KVM related kernel parameters' descriptions
  docs: consolidate human interface subsystems
  docs: admin-guide: Add information about intel_pstate active mode

Merge tag 'linux-kselftest-next-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - allow runners to override the timeout

   This change is made to avoid future increases of long timeouts

 - several other spelling and cleanups

 - a new subtest to video_device_test

 - enhancements to test coverage in clone3 test

 - other fixes to ftrace and cpufreq tests

* tag 'linux-kselftest-next-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftace: Fix KTAP output ordering
  selftests/cpufreq: Don't enable generic lock debugging options
  kselftests: Sort the collections list to avoid duplicate tests
  selftest: pidfd: Omit long and repeating outputs
  selftests: allow runners to override the timeout
  selftests/ftrace: Add new test case which checks for optimized probes
  selftests/clone3: test clone3 with exit signal in flags
  kselftest: vDSO: Fix accumulation of uninitialized ret when CLOCK_REALTIME is undefined
  selftests: prctl: Fix spelling mistake "anonynous" -> "anonymous"
  selftests: media_tests: Add new subtest to video_device_test

Merge tag 'linux-kselftest-kunit-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:

 - kunit_add_action() API to defer a call until test exit

 - Update document to add kunit_add_action() usage notes

 - Changes to always run cleanup from a test kthread

 - Documentation updates to clarify cleanup usage (assertions should not
   be used in cleanup)

 - Documentation update to clearly indicate that exit functions should
   run even if init fails

 - Several fixes and enhancements to existing tests

* tag 'linux-kselftest-kunit-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  MAINTAINERS: Add source tree entry for kunit
  Documentation: kunit: Rename references to kunit_abort()
  kunit: Move kunit_abort() call out of kunit_do_failed_assertion()
  kunit: Fix obsolete name in documentation headers (func->action)
  Documentation: Kunit: add MODULE_LICENSE to sample code
  kunit: Update kunit_print_ok_not_ok function
  kunit: Fix reporting of the skipped parameterized tests
  kunit/test: Add example test showing parameterized testing
  Documentation: kunit: Add usage notes for kunit_add_action()
  kunit: kmalloc_array: Use kunit_add_action()
  kunit: executor_test: Use kunit_add_action()
  kunit: Add kunit_add_action() to defer a call until test exit
  kunit: example: Provide example exit functions
  Documentation: kunit: Warn that exit functions run even if init fails
  Documentation: kunit: Note that assertions should not be used in cleanup
  kunit: Always run cleanup from a test kthread
  Documentation: kunit: Modular tests should not depend on KUNIT=y
  kunit: tool: undo type subscripts for subprocess.Popen

Pull nolibc updates from Paul McKenney:

 - Add stackprotector support

 - Fix RISC-V load-store instruction syntax to support 32-bit binaries,
   plus fixes for generic 32-bit support

 - Fix use of s390 sys_fork()

 - Add my_syscall6() for ARM

 - Support different platforms having different errno definitions

 - Fix ppoll/ppoll_time64 arguments (add the fifth argument)

 - Force use of little endian on MIPS

 - Improved testing, for example, better handling of different compilers
   and compiler versions, comparing nolibc behavior to that of libc, and
   additional test cases

 - Improve syntax and header ordering

 - Use existing <linux/reboot.h> instead of redefining constants

 - Add syscall()

* tag 'nolibc.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (53 commits)
  selftests/nolibc: make sure gcc always use little endian on MIPS
  selftests/nolibc: also count skipped and failed tests in output
  selftests/nolibc: add new gettimeofday test cases
  selftests/nolibc: remove gettimeofday_bad1/2 completely
  selftests/nolibc: support two errnos with EXPECT_SYSER2()
  tools/nolibc: open: fix up compile warning for arm
  tools/nolibc: arm: add missing my_syscall6
  selftests/nolibc: use INT_MAX instead of __INT_MAX__
  selftests/nolibc: not include limits.h for nolibc
  selftests/nolibc: fix up compile warning with glibc on x86_64
  selftests/nolibc: allow specify extra arguments for qemu
  selftests/nolibc: remove test gettimeofday_null
  tools/nolibc: ensure fast64 integer types have 64 bits
  selftests/nolibc: test_fork: fix up duplicated print
  tools/nolibc: ppoll/ppoll_time64: add a missing argument
  selftests/nolibc: remove the duplicated gettimeofday_bad2
  selftests/nolibc: print name instead of number for EOVERFLOW
  tools/nolibc: support nanoseconds in stat()
  selftests/nolibc: prevent coredumps during test execution
  tools/nolibc: add support for prctl()
  ...

Pull RCU updates from Paul McKenney:
 "Documentation updates

  Miscellaneous fixes, perhaps most notably:

   - Remove RCU_NONIDLE(). The new visibility of most of the idle loop
     to RCU has obsoleted this API.

   - Make the RCU_SOFTIRQ callback-invocation time limit also apply to
     the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.

   - Add a jiffies-based callback-invocation time limit to handle
     long-running callbacks. (The local_clock() function is only invoked
     once per 32 callbacks due to its high overhead.)

   - Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs, which
     fixes a bug that can occur on systems with non-contiguous CPU
     numbering.

  kvfree_rcu updates:

   - Eliminate the single-argument variant of k[v]free_rcu() now that
     all uses have been converted to k[v]free_rcu_mightsleep().

   - Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks too
     soon. Yes, this is closing the barn door after the horse has
     escaped, but Murphy says that there will be more horses.

  Callback-offloading updates:

   - Fix a number of bugs involving the shrinker and lazy callbacks.

  Tasks RCU updates

  Torture-test updates"

* tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
  torture: Remove duplicated argument -enable-kvm for ppc64
  doc/rcutorture: Add description of rcutorture.stall_cpu_block
  rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
  rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
  rcutorture: Correct name of use_softirq module parameter
  locktorture: Add long_hold to adjust lock-hold delays
  rcu/nocb: Make shrinker iterate only over NOCB CPUs
  rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs
  rcu: Make rcu_cpu_starting() rely on interrupts being disabled
  rcu: Mark rcu_cpu_kthread() accesses to ->rcu_cpu_has_work
  rcu: Mark additional concurrent load from ->cpu_no_qs.b.exp
  rcu: Employ jiffies-based backstop to callback time limit
  rcu: Check callback-invocation time limit for rcuc kthreads
  rcu: Remove RCU_NONIDLE()
  rcu: Add more RCU files to kernel-api.rst
  rcu-tasks: Clarify the cblist_init_generic() function's pr_info() output
  rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()
  rcu/nocb: Recheck lazy callbacks under the ->nocb_lock from shrinker
  rcu/nocb: Fix shrinker race against callback enqueuer
  rcu/nocb: Protect lazy shrinker against concurrent (de-)offloading
  ...

Merge tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "Improvements:

   - Support Pin Assignment D in getting mux state

   - Emit an uevent when EC panics so that userland programs get chance
     to capture EC coredumps (LPC interface only)

   - Send EC_CMD_HOST_SLEEP_EVENT to EC at the very beginning/end of
     system suspend/resume so that EC can watch the duration more
     accurately (LPC interface only)

  Misc:

   - Switch back from I2C .probe_new() to .probe()

   - Use %*ph for printing hexdump of small buffers"

* tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_spi: Use %*ph for printing hexdump of a small buffer
  platform/chrome: Switch i2c drivers back to use .probe()
  platform/chrome: cros_ec_lpc: Move host command to prepare/complete
  platform/chrome: cros_ec: Report EC panic as uevent
  platform/chrome: cros_typec_switch: Add Pin D support

Pull thermal control updates from Rafael Wysocki:
 "These extend the int340x thermal driver, add thermal DT bindings for
  some Qcom platforms, add DT bindings and support for Armada AP807 and
  MSM8909, allow selecting the bang-bang thermal governor as the default
  one, address issues in several thermal drivers for ARM platforms and
  clean up code.

  Specifics:

   - Add new IOCTLs to the int340x thermal driver to allow user space to
     retrieve the Passive v2 thermal table (Srinivas Pandruvada)

   - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms
     (Konrad Dybcio)

   - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)

   - Add DT bindings for QCom ipq9574 (Praveenkumar I)

   - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)

   - Allow selecting the bang-bang governor as default (Thierry Reding)

   - Refactor and prepare the code to set the scene for RCar Gen4
     (Wolfram Sang)

   - Clean up and fix the QCom tsens drivers. Add DT bindings and
     calibration for the MSM8909 platform (Stephan Gerhold)

   - Revert a patch introducing a wrong usage of devm_of_iomap() on the
     Mediatek platform (Ricardo Cañuelo)

   - Fix the clock vs reset ordering in order to conform to the
     documentation on the sun8i (Christophe JAILLET)

   - Prevent setting up undocumented registers, enable the only
     described sensors and add the version 2.1 on the Qoriq sensor (Peng
     Fan)

   - Add DT bindings and support for the Armada AP807 (Alex Leibovich)

   - Update the mlx5 driver with the recent thermal changes (Daniel
     Lezcano)

   - Convert to platform remove callback returning void on STM32 (Uwe
     Kleine-König)

   - Add an error information printing for devm_thermal_add_hwmon_sysfs()
     and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
     Qoriq, Mediateka and QCom (Yangtao Li)

   - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)

   - Use the dev_err_probe() function in the QCom tsens alarm driver
     (Luca Weiss)"

* tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
  thermal/drivers/qcom: Remove redundant msg at probe time
  thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
  thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
  thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
  drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
  thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
  thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
  thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
  thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
  thermal/drivers/stm32: Convert to platform remove callback returning void
  net/mlx5: Update the driver with the recent thermal changes
  thermal/drivers/armada: Add support for AP807 thermal data
  dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
  thermal/drivers/qoriq: Support version 2.1
  thermal/drivers/qoriq: Only enable supported sensors
  thermal/drivers/qoriq: No need to program site adjustment register
  thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
  ...

Pull power management updates from Rafael Wysocki:
 "These add Intel TPMI (Topology Aware Register and PM Capsule
  Interface) support to the power capping subsystem, extend the
  intel_idle driver to work in VM guests where MWAIT is not available,
  extend the system-wide power management diagnostics, fix bugs and
  clean up code.

  Specifics:

   - Introduce power capping core support for Intel TPMI (Topology Aware
     Register and PM Capsule Interface) and a TPMI interface driver for
     Intel RAPL (Zhang Rui, Dan Carpenter)

   - Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
     driver (Zhang Rui)

   - Fix invalid initialization for pl4_supported field in the Intel
     RAPL power capping driver (Sumeet Pawnikar)

   - Clean up the intel_idle driver, make it work with VM guests that
     cannot use the MWAIT instruction and address the case in which the
     host may enter a deep idle state when the guest is idle (Arjan van
     de Ven)

   - Prevent cpufreq drivers that provide the ->adjust_perf() callback
     without a ->fast_switch() one which is used as a fallback from the
     former in some cases (Wyes Karny)

   - Fix some issues related to the AMD P-state cpufreq driver (Mario
     Limonciello, Wyes Karny)

   - Fix the energy_performance_preference attribute handling in the
     intel_pstate driver in passive mode (Tero Kristo)

   - Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
     (Kai-Heng Feng)

   - Correct spelling mistake in a comment in the hibernation code (Wang
     Honghui)

   - Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
     build warning (Arnd Bergmann)

   - Restrict pm_pr_dbg() to system-wide power transitions and use it in
     a few additional places (Mario Limonciello)

   - Drop verification of in-params from genpd_add_device() and ensure
     that all of its callers will do it (Ulf Hansson)

   - Prevent possible integer overflows from occurring in
     genpd_parse_state() (Nikita Zhandarovich)

   - Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
     somewhat (Christophe JAILLET)

   - Ensure that the Exynos PPMU driver is already loaded before the
     Exynos Bus driver starts probing so as to avoid a possible freeze
     loading of the kernel modules (Marek Szyprowski)

   - Fix variable deferencing before NULL check in the mtk-cci devfreq
     driver (Sukrut Bellary)"

* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
  intel_idle: Add a "Long HLT" C1 state for the VM guest mode
  cpufreq: intel_pstate: Fix energy_performance_preference for passive
  cpufreq: amd-pstate: Add a kernel config option to set default mode
  cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
  ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
  cpufreq: amd-pstate: Set default governor to schedutil
  PM: domains: Move the verification of in-params from genpd_add_device()
  cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
  cpufreq: amd-pstate: Write CPPC enable bit per-socket
  intel_idle: Add support for using intel_idle in a VM guest using just hlt
  cpufreq: Fail driver register if it has adjust_perf without fast_switch
  intel_idle: clean up the (new) state_update_enter_method function
  intel_idle: refactor state->enter manipulation into its own function
  platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
  pinctrl: amd: Use pm_pr_dbg to show debugging messages
  ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
  include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
  powercap: RAPL: Fix a NULL vs IS_ERR() bug
  powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
  powercap: RAPL: fix invalid initialization for pl4_supported field
  ...

Pull ACPI updates from Rafael Wysocki:
 "These rework the handling of notifications in ACPI button drivers (to
  enable future simplifications and cleanups), clean up the ACPI thermal
  driver, update the ACPI backlight driver, add quirks working around
  AML bugs on some systems, fix some assorted issues and clean up code.

  Specifics:

   - Reduce ACPI device enumeration overhead related to devices with
     dependencies (Rafael Wysocki)

   - Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
     Limonciello)

   - Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
     Bergmann)

   - Drop several ACPI resource management quirks related to IRQ
     ovverides on AMD "Zen" systems (Mario Limonciello)

   - Modify the ACPI EC driver to make it only clear the EC GPE status
     when handling the GPE (Jeremy Compostella)

   - Add quirks to work around ACPI tables defects on Lenovo Yoga Book
     yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)

   - Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
     X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
     vendor backlight control on relatively recent systems (Hans de
     Goede)

   - Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
     ACPI LPSS (Intel SoC) driver (Hans de Goede)

   - Add nfit_intel_shutdown_status() declaration to a local header to
     avoid a "missing prototypes" build warning (Arnd Bergmann)

   - Clean up the ACPI thermal driver and drop some dead or otherwise
     unneded code from it (Rafael Wysocki)

   - Rework the handling of notifications in the ACPI button drivers so
     as to allow the common notification handling code for devices to be
     simplified (Rafael Wysocki)

   - Make ghes_get_devices() return NULL to indicate that there are no
     GHES devices so as to allow vendor-specific EDAC drivers to probe
     then (Li Yang)

   - Mark bert_disable() as __initdata and drop an unused function from
     the APEI GHES code (Miaohe Lin)

   - Make the ACPI PAD (Processor Aggregator Device) driver realize that
     Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)

   - Drop the certainly unnecessary and likely incorrect inclusion of
     linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"

* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
  ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
  ACPI: thermal: Drop struct acpi_thermal_flags
  ACPI: thermal: Drop struct acpi_thermal_state
  ACPI: bus: Simplify installation and removal of notify callback
  ACPI: tiny-power-button: Eliminate the driver notify callback
  ACPI: button: Use different notify handlers for lid and buttons
  ACPI: button: Eliminate the driver notify callback
  ACPI: thermal: Eliminate struct acpi_thermal_state_flags
  ACPI: thermal: Move acpi_thermal_driver definition
  ACPI: thermal: Move symbol definitions to one place
  ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
  ACPI: thermal: Use BIT() macro for defining flags
  APEI: GHES: correctly return NULL for ghes_get_devices()
  ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
  ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
  ACPI: APEI: mark bert_disable as __initdata
  ACPI: EC: Clear GPE on interrupt handling only
  ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
  ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
  ACPI: resource: Remove "Zen" specific match and quirks
  ...

Pull arm64 updates from Catalin Marinas:
 "Notable features are user-space support for the memcpy/memset
  instructions and the permission indirection extension.

   - Support for the Armv8.9 Permission Indirection Extensions. While
     this feature doesn't add new functionality, it enables future
     support for Guarded Control Stacks (GCS) and Permission Overlays

   - User-space support for the Armv8.8 memcpy/memset instructions

   - arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
     identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
     cleanups

   - Removal of superfluous ISBs on context switch (following
     retrospective architecture tightening)

   - Decode the ISS2 register during faults for additional information
     to help with debugging

   - KPTI clean-up/simplification of the trampoline exit code

   - Addressing several -Wmissing-prototype warnings

   - Kselftest improvements for signal handling and ptrace

   - Fix TPIDR2_EL0 restoring on sigreturn

   - Clean-up, robustness improvements of the module allocation code

   - More sysreg conversions to the automatic register/bitfields
     generation

   - CPU capabilities handling cleanup

   - Arm documentation updates: ACPI, ptdump"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
  kselftest/arm64: Add a test case for TPIDR2 restore
  arm64/signal: Restore TPIDR2 register rather than memory state
  arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
  Documentation/arm64: Add ptdump documentation
  arm64: hibernate: remove WARN_ON in save_processor_state
  kselftest/arm64: Log signal code and address for unexpected signals
  docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
  arm64/fpsimd: Exit streaming mode when flushing tasks
  docs: perf: Add new description for HiSilicon UC PMU
  drivers/perf: hisi: Add support for HiSilicon UC PMU driver
  drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
  perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
  perf/arm-cmn: Add sysfs identifier
  perf/arm-cmn: Revamp model detection
  perf/arm_dmc620: Add cpumask
  arm64: mm: fix VA-range sanity check
  arm64/mm: remove now-superfluous ISBs from TTBR writes
  Documentation/arm64: Update ACPI tables from BBR
  Documentation/arm64: Update references in arm-acpi
  Documentation/arm64: Update ARM and arch reference
  ...

Pull ARM updates from Russell King:

 - lots of build cleanups from Arnd spread throughout the arch/arm tree

 - replace strlcpy() with the preferred strscpy()

 - use sign_extend32() in the module linker

 - drop handle_irq() machine descriptor method

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
  ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
  ARM: 9313/1: vdso: add missing prototypes
  ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
  ARM: 9311/1: decompressor: move function prototypes to misc.h
  ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
  ARM: 9309/1: add missing syscall prototypes
  ARM: 9308/1: move setup functions to header
  ARM: 9307/1: nommu: include asm/idmap.h
  ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
  ARM: 9305/1: add clear/copy_user_highpage declarations
  ARM: 9304/1: add prototype for function called only from asm
  ARM: 9303/1: kprobes: avoid missing-declaration warnings
  ARM: 9302/1: traps: hide unused functions on NOMMU
  ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
  ARM: 9300/1: Replace all non-returning strlcpy with strscpy
  ARM: 9299/1: module: use sign_extend32() to extend the signedness
  ARM: 9298/1: Drop custom mdesc->handle_irq()

Pull m68k updates from Geert Uytterhoeven:

  - miscellaneous NuBus fixes and improvements

  - defconfig updates

* tag 'm68k-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.4-rc1
  nubus: Don't list slot resources by default
  nubus: Remove proc entries before adding them
  nubus: Partially revert proc_create_single_data() conversion

Pull x86 cleanups from Dave Hansen:
 "As usual, these are all over the map. The biggest cluster is work from
  Arnd to eliminate -Wmissing-prototype warnings:

   - Address -Wmissing-prototype warnings

   - Remove repeated 'the' in comments

   - Remove unused current_untag_mask()

   - Document urgent tip branch timing

   - Clean up MSR kernel-doc notation

   - Clean up paravirt_ops doc

   - Update Srivatsa S. Bhat's maintained areas

   - Remove unused extern declaration acpi_copy_wakeup_routine()"

* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
  Documentation: virt: Clean up paravirt_ops doc
  x86/mm: Remove unused current_untag_mask()
  x86/mm: Remove repeated word in comments
  x86/lib/msr: Clean up kernel-doc notation
  x86/platform: Avoid missing-prototype warnings for OLPC
  x86/mm: Add early_memremap_pgprot_adjust() prototype
  x86/usercopy: Include arch_wb_cache_pmem() declaration
  x86/vdso: Include vdso/processor.h
  x86/mce: Add copy_mc_fragile_handle_tail() prototype
  x86/fbdev: Include asm/fb.h as needed
  x86/hibernate: Declare global functions in suspend.h
  x86/entry: Add do_SYSENTER_32() prototype
  x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
  x86/mm: Include asm/numa.h for set_highmem_pages_init()
  x86: Avoid missing-prototype warnings for doublefault code
  x86/fpu: Include asm/fpu/regset.h
  x86: Add dummy prototype for mk_early_pgtbl_32()
  x86/pci: Mark local functions as 'static'
  x86/ftrace: Move prepare_ftrace_return prototype to header
  ...

Pull x86 tdx updates from Dave Hansen:

 - Fix a race window where load_unaligned_zeropad() could cause a fatal
   shutdown during TDX private<=>shared conversion

   The race has never been observed in practice but might allow
   load_unaligned_zeropad() to catch a TDX page in the middle of its
   conversion process which would lead to a fatal and unrecoverable
   guest shutdown.

 - Annotate sites where VM "exit reasons" are reused as hypercall
   numbers.

* tag 'x86_tdx_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix enc_status_change_finish_noop()
  x86/tdx: Fix race between set_memory_encrypted() and load_unaligned_zeropad()
  x86/mm: Allow guest.enc_status_change_prepare() to fail
  x86/tdx: Wrap exit reason with hcall_func()

Pull x86 platform updates from Dave Hansen:
 "Allow CPUs in SGX/HPE Ultraviolet to start using Sub-NUMA clustering
  (SNC) mode. SNC has been around outside the UV world for a while but
  evidently never worked on UV systems.

  SNC is rather notorious for breaking bad assumptions of a 1:1
  relationship between physical sockets and NUMA nodes. The UV code was
  rather prolific with these assumptions and took quite a bit of
  refactoring to remove them"

* tag 'x86_platform_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Update UV[23] platform code for SNC
  x86/platform/uv: Remove remaining BUG_ON() and BUG() calls
  x86/platform/uv: UV support for sub-NUMA clustering
  x86/platform/uv: Helper functions for allocating and freeing conversion tables
  x86/platform/uv: When searching for minimums, start at INT_MAX not 99999
  x86/platform/uv: Fix printed information in calc_mmioh_map
  x86/platform/uv: Introduce helper function uv_pnode_to_socket.
  x86/platform/uv: Add platform resolving #defines for misc GAM_MMIOH_REDIRECT*

Pull x86 irq updates from Dave Hansen:
 "Add Hyper-V interrupts to /proc/stat"

* tag 'x86_irq_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Add hardcoded hypervisor interrupts to /proc/stat

Pull x86 cpu updates from Borislav Petkov:

 - Compute the purposeful misalignment of zen_untrain_ret automatically
   and assert __x86_return_thunk's alignment so that future changes to
   the symbol macros do not accidentally break them.

 - Remove CONFIG_X86_FEATURE_NAMES Kconfig option as its existence is
   pointless

* tag 'x86_cpu_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retbleed: Add __x86_return_thunk alignment checks
  x86/cpu: Remove X86_FEATURE_NAMES
  x86/Kconfig: Make X86_FEATURE_NAMES non-configurable in prompt

Pull x86 confidential computing update from Borislav Petkov:

 - Add support for unaccepted memory as specified in the UEFI spec v2.9.

   The gist of it all is that Intel TDX and AMD SEV-SNP confidential
   computing guests define the notion of accepting memory before using
   it and thus preventing a whole set of attacks against such guests
   like memory replay and the like.

   There are a couple of strategies of how memory should be accepted -
   the current implementation does an on-demand way of accepting.

* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt: sevguest: Add CONFIG_CRYPTO dependency
  x86/efi: Safely enable unaccepted memory in UEFI
  x86/sev: Add SNP-specific unaccepted memory support
  x86/sev: Use large PSC requests if applicable
  x86/sev: Allow for use of the early boot GHCB for PSC requests
  x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
  x86/sev: Fix calculation of end address based on number of pages
  x86/tdx: Add unaccepted memory support
  x86/tdx: Refactor try_accept_one()
  x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
  efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
  efi: Add unaccepted memory support
  x86/boot/compressed: Handle unaccepted memory
  efi/libstub: Implement support for unaccepted memory
  efi/x86: Get full memory map in allocate_e820()
  mm: Add support for unaccepted memory

Pull x86 resource control updates from Borislav Petkov:

 - Implement a rename operation in resctrlfs to facilitate handling of
   application containers with dynamically changing task lists

 - When reading the tasks file, show the tasks' pid which are only in
   the current namespace as opposed to showing the pids from the init
   namespace too

 - Other fixes and improvements

* tag 'x86_cache_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/x86: Documentation for MON group move feature
  x86/resctrl: Implement rename op for mon groups
  x86/resctrl: Factor rdtgroup lock for multi-file ops
  x86/resctrl: Only show tasks' pid in current pid namespace

Pull x86 build update from Borislav Petkov:

 - Remove relocation information from vmlinux as it is not needed by
   other tooling and thus a slimmer binary is generated.

   This is important for distros who have to distribute vmlinux blobs
   with their kernel packages too and that extraneous unnecessary data
   bloats them for no good reason

* tag 'x86_build_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Avoid relocation information in final vmlinux

Pull x86 instruction alternatives updates from Borislav Petkov:

 - Up until now the Fast Short Rep Mov optimizations implied the
   presence of the ERMS CPUID flag. AMD decoupled them with a BIOS
   setting so decouple that dependency in the kernel code too

 - Teach the alternatives machinery to handle relocations

 - Make debug_alternative accept flags in order to see only that set of
   patching done one is interested in

 - Other fixes, cleanups and optimizations to the patching code

* tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternative: PAUSE is not a NOP
  x86/alternatives: Add cond_resched() to text_poke_bp_batch()
  x86/nospec: Shorten RESET_CALL_DEPTH
  x86/alternatives: Add longer 64-bit NOPs
  x86/alternatives: Fix section mismatch warnings
  x86/alternative: Optimize returns patching
  x86/alternative: Complicate optimize_nops() some more
  x86/alternative: Rewrite optimize_nops() some
  x86/lib/memmove: Decouple ERMS from FSRM
  x86/alternative: Support relocations in alternatives
  x86/alternative: Make debug-alternative selective

Pull RAS updates from Borislav Petkov:

 - Add initial support for RAS hardware found on AMD server GPUs (MI200).

   Those GPUs and CPUs are connected together through the coherent
   fabric and the GPU memory controllers report errors through x86's MCA
   so EDAC needs to support them. The amd64_edac driver supports now HBM
   (High Bandwidth Memory) and thus such heterogeneous memory controller
   systems

 - Other small cleanups and improvements

* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/amd64: Cache and use GPU node map
  EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
  EDAC/amd64: Document heterogeneous system enumeration
  x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
  x86/amd_nb: Re-sort and re-indent PCI defines
  x86/amd_nb: Add MI200 PCI IDs
  ras/debugfs: Fix error checking for debugfs_create_dir()
  x86/MCE: Check a hw error's address to determine proper recovery action

Pull EDAC updates from Borislav Petkov:

 - amd64_edac: Add support for Zen4 client hardware

 - amd64_edac: Remove the version string as it is useless and actively
   confusing when looking at backported versions of the driver

 - Add a driver for the Nuvoton NPCM memory controller

 - A debugfs error checking cleanup

* tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/npcm: Add NPCM memory controller driver
  dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
  EDAC/thunderx: Check debugfs file creation retval properly
  EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh
  EDAC/amd64: Remove module version string

Pull x86 core updates from Thomas Gleixner:
 "A set of fixes for kexec(), reboot and shutdown issues:

   - Ensure that the WBINVD in stop_this_cpu() has been completed before
     the control CPU proceedes.

     stop_this_cpu() is used for kexec(), reboot and shutdown to park
     the APs in a HLT loop.

     The control CPU sends an IPI to the APs and waits for their CPU
     online bits to be cleared. Once they all are marked "offline" it
     proceeds.

     But stop_this_cpu() clears the CPU online bit before issuing
     WBINVD, which means there is no guarantee that the AP has reached
     the HLT loop.

     This was reported to cause intermittent reboot/shutdown failures
     due to some dubious interaction with the firmware.

     This is not only a problem of WBINVD. The code to actually "stop"
     the CPU which runs between clearing the online bit and reaching the
     HLT loop can cause large enough delays on its own (think
     virtualization). That's especially dangerous for kexec() as kexec()
     expects that all APs are in a safe state and not executing code
     while the boot CPU jumps to the new kernel. There are more issues
     vs kexec() which are addressed separately.

     Cure this by implementing an explicit synchronization point right
     before the AP reaches HLT. This guarantees that the AP has
     completed the full stop proceedure.

   - Fix the condition for WBINVD in stop_this_cpu().

     The WBINVD in stop_this_cpu() is required for ensuring that when
     switching to or from memory encryption no dirty data is left in the
     cache lines which might cause a write back in the wrong more later.

     This checks CPUID directly because the feature bit might have been
     cleared due to a command line option.

     But that CPUID check accesses leaf 0x8000001f::EAX unconditionally.
     Intel CPUs return the content of the highest supported leaf when a
     non-existing leaf is read, while AMD CPUs return all zeros for
     unsupported leafs.

     So the result of the test on Intel CPUs is lottery and on AMD its
     just correct by chance.

     While harmless it's incorrect and causes the conditional wbinvd()
     to be issued where not required, which caused the above issue to be
     unearthed.

   - Make kexec() robust against AP code execution

     Ashok observed triple faults when doing kexec() on a system which
     had been booted with "nosmt".

     It turned out that the SMT siblings which had been brought up
     partially are parked in mwait_play_dead() to enable power savings.

     mwait_play_dead() is monitoring the thread flags of the AP's idle
     task, which has been chosen as it's unlikely to be written to.

     But kexec() can overwrite the previous kernel text and data
     including page tables etc. When it overwrites the cache lines
     monitored by an AP that AP resumes execution after the MWAIT on
     eventually overwritten text, stack and page tables, which obviously
     might end up in a triple fault easily.

     Make this more robust in several steps:

      1) Use an explicit per CPU cache line for monitoring.

      2) Write a command to these cache lines to kick APs out of MWAIT
         before proceeding with kexec(), shutdown or reboot.

         The APs confirm the wakeup by writing status back and then
         enter a HLT loop.

      3) If the system uses INIT/INIT/STARTUP for AP bringup, park the
         APs in INIT state.

         HLT is not a guarantee that an AP won't wake up and resume
         execution. HLT is woken up by NMI and SMI. SMI puts the CPU
         back into HLT (+/- firmware bugs), but NMI is delivered to the
         CPU which executes the NMI handler. Same issue as the MWAIT
         scenario described above.

         Sending an INIT/INIT sequence to the APs puts them into wait
         for STARTUP state, which is safe against NMI.

     There is still an issue remaining which can't be fixed: #MCE

     If the AP sits in HLT and receives a broadcast #MCE it will try to
     handle it with the obvious consequences.

     INIT/INIT clears CR4.MCE in the AP which will cause a broadcast
     #MCE to shut down the machine.

     So there is a choice between fire (HLT) and frying pan (INIT).
     Frying pan has been chosen as it's at least preventing the NMI
     issue.

     On systems which are not using INIT/INIT/STARTUP there is not much
     which can be done right now, but at least the obvious and easy to
     trigger MWAIT issue has been addressed"

* tag 'x86-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Put CPUs into INIT on shutdown if possible
  x86/smp: Split sending INIT IPI out into a helper function
  x86/smp: Cure kexec() vs. mwait_play_dead() breakage
  x86/smp: Use dedicated cache-line for mwait_play_dead()
  x86/smp: Remove pointless wmb()s from native_stop_other_cpus()
  x86/smp: Dont access non-existing CPUID leaf
  x86/smp: Make stop_other_cpus() more robust

Pull timer updates from Thomas Gleixner:
 "Time, timekeeping and related device driver updates:

  Core:

   - A set of fixes, cleanups and enhancements to the posix timer code:

       - Prevent another possible live lock scenario in the exit() path,
         which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.

       - Fix a loop termination issue which was reported syzcaller/KSAN
         in the posix timer ID allocation code.

         That triggered a deeper look into the posix-timer code which
         unearthed more small issues.

       - Add missing READ/WRITE_ONCE() annotations

       - Fix or remove completely outdated comments

       - Document places which are subtle and completely undocumented.

   - Add missing hrtimer modes to the trace event decoder

   - Small cleanups and enhancements all over the place

  Drivers:

   - Rework the Hyper-V clocksource and sched clock setup code

   - Remove a deprecated clocksource driver

   - Small fixes and enhancements all over the place"

* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
  dt-bindings: timers: Add Ralink SoCs timer
  clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
  dt-bindings: timer: brcm,kona-timer: convert to YAML
  clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
  clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
  hrtimer: Add missing sparse annotations to hrtimer locking
  clocksource/drivers/imx-gpt: Use only a single name for functions
  clocksource/drivers/loongson1: Move PWM timer to clocksource framework
  dt-bindings: timer: Add Loongson-1 clocksource
  MIPS: Loongson32: Remove deprecated PWM timer clocksource
  clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
  tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
  posix-timers: Add sys_ni_posix_timers() prototype
  tick/rcu: Fix bogus ratelimit condition
  alarmtimer: Remove unnecessary (void *) cast
  alarmtimer: Remove unnecessary initialization of variable 'ret'
  posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
  posix-timers: Polish coding style in a few places
  posix-timers: Remove pointless comments
  ...

Pull SMP updates from Thomas Gleixner:
 "A large update for SMP management:

   - Parallel CPU bringup

     The reason why people are interested in parallel bringup is to
     shorten the (kexec) reboot time of cloud servers to reduce the
     downtime of the VM tenants.

     The current fully serialized bringup does the following per AP:

       1) Prepare callbacks (allocate, intialize, create threads)
       2) Kick the AP alive (e.g. INIT/SIPI on x86)
       3) Wait for the AP to report alive state
       4) Let the AP continue through the atomic bringup
       5) Let the AP run the threaded bringup to full online state

     There are two significant delays:

       #3 The time for an AP to report alive state in start_secondary()
          on x86 has been measured in the range between 350us and 3.5ms
          depending on vendor and CPU type, BIOS microcode size etc.

       #4 The atomic bringup does the microcode update. This has been
          measured to take up to ~8ms on the primary threads depending
          on the microcode patch size to apply.

     On a two socket SKL server with 56 cores (112 threads) the boot CPU
     spends on current mainline about 800ms busy waiting for the APs to
     come up and apply microcode. That's more than 80% of the actual
     onlining procedure.

     This can be reduced significantly by splitting the bringup
     mechanism into two parts:

       1) Run the prepare callbacks and kick the AP alive for each AP
          which needs to be brought up.

          The APs wake up, do their firmware initialization and run the
          low level kernel startup code including microcode loading in
          parallel up to the first synchronization point. (#1 and #2
          above)

       2) Run the rest of the bringup code strictly serialized per CPU
          (#3 - #5 above) as it's done today.

          Parallelizing that stage of the CPU bringup might be possible
          in theory, but it's questionable whether required surgery
          would be justified for a pretty small gain.

     If the system is large enough the first AP is already waiting at
     the first synchronization point when the boot CPU finished the
     wake-up of the last AP. That reduces the AP bringup time on that
     SKL from ~800ms to ~80ms, i.e. by a factor ~10x.

     The actual gain varies wildly depending on the system, CPU,
     microcode patch size and other factors. There are some
     opportunities to reduce the overhead further, but that needs some
     deep surgery in the x86 CPU bringup code.

     For now this is only enabled on x86, but the core functionality
     obviously works for all SMP capable architectures.

   - Enhancements for SMP function call tracing so it is possible to
     locate the scheduling and the actual execution points. That allows
     to measure IPI delivery time precisely"

* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  trace,smp: Add tracepoints for scheduling remotelly called functions
  trace,smp: Add tracepoints around remotelly called functions
  MAINTAINERS: Add CPU HOTPLUG entry
  x86/smpboot: Fix the parallel bringup decision
  x86/realmode: Make stack lock work in trampoline_compat()
  x86/smp: Initialize cpu_primary_thread_mask late
  cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
  x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
  x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
  x86/smpboot: Support parallel startup of secondary CPUs
  x86/smpboot: Implement a bit spinlock to protect the realmode stack
  x86/apic: Save the APIC virtual base address
  cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
  x86/apic: Provide cpu_primary_thread mask
  x86/smpboot: Enable split CPU startup
  cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
  cpu/hotplug: Reset task stack state in _cpu_up()
  cpu/hotplug: Remove unused state functions
  riscv: Switch to hotplug core state synchronization
  parisc: Switch to hotplug core state synchronization
  ...

Pull x86 boot updates from Thomas Gleixner:
 "Initialize FPU late.

  Right now FPU is initialized very early during boot. There is no real
  requirement to do so. The only requirement is to have it done before
  alternatives are patched.

  That's done in check_bugs() which does way more than what the function
  name suggests.

  So first rename check_bugs() to arch_cpu_finalize_init() which makes
  it clear what this is about.

  Move the invocation of arch_cpu_finalize_init() earlier in
  start_kernel() as it has to be done before fork_init() which needs to
  know the FPU register buffer size.

  With those prerequisites the FPU initialization can be moved into
  arch_cpu_finalize_init(), which removes it from the early and fragile
  part of the x86 bringup"

* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
  x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
  x86/fpu: Mark init functions __init
  x86/fpu: Remove cpuinfo argument from init functions
  x86/init: Initialize signal frame size late
  init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
  init: Invoke arch_cpu_finalize_init() earlier
  init: Remove check_bugs() leftovers
  um/cpu: Switch to arch_cpu_finalize_init()
  sparc/cpu: Switch to arch_cpu_finalize_init()
  sh/cpu: Switch to arch_cpu_finalize_init()
  mips/cpu: Switch to arch_cpu_finalize_init()
  m68k/cpu: Switch to arch_cpu_finalize_init()
  loongarch/cpu: Switch to arch_cpu_finalize_init()
  ia64/cpu: Switch to arch_cpu_finalize_init()
  ARM: cpu: Switch to arch_cpu_finalize_init()
  x86/cpu: Switch to arch_cpu_finalize_init()
  init: Provide arch_cpu_finalize_init()

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core:

   - Convert the interrupt descriptor storage to a maple tree to
     overcome the limitations of the radixtree + fixed size bitmap.

     This allows us to handle very large servers with a huge number of
     guests without imposing a huge memory overhead on everyone

   - Implement optional retriggering of interrupts which utilize the
     fasteoi handler to work around a GICv3 architecture issue

  Drivers:

   - A set of fixes and updates for the Loongson/Loongarch related
     drivers

   - Workaound for an ASR8601 integration hickup which ends up with CPU
     numbering which can't be represented in the GIC implementation

   - The usual set of boring fixes and updates all over the place"

* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
  irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
  irqchip/stm32-exti: Fix warning on initialized field overwritten
  irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
  irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
  irqchip/mxs: Include linux/irqchip/mxs.h
  irqchip/clps711x: Remove unused clps711x_intc_init() function
  irqchip/mmp: Remove non-DT codepath
  irqchip/ftintc010: Mark all function static
  irqdomain: Include internals.h for function prototypes
  irqchip/loongson-eiointc: Add DT init support
  dt-bindings: interrupt-controller: Add Loongson EIOINTC
  irqchip/loongson-eiointc: Fix irq affinity setting during resume
  irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
  irqchip/loongson-liointc: Fix IRQ trigger polarity
  irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
  irqchip/loongson-pch-pic: Fix initialization of HT vector register
  irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
  genirq: Allow fasteoi handler to resend interrupts on concurrent handling
  genirq: Expand doc for PENDING and REPLAY flags
  ...