This patch (as1464) implements the recommended policy that most errors
during suspend or hibernation should not prevent the system from going
to sleep.  In particular, failure to suspend a USB driver or a USB
device should not prevent the sleep from succeeding:

Failure to suspend a device won't matter, because the device will
automatically go into suspend mode when the USB bus stops carrying
packets.  (This might be less true for USB-3.0 devices, but let's not
worry about them now.)

Failure of a driver to suspend might lead to trouble later on when the
system wakes up, but it isn't sufficient reason to prevent the system
from going to sleep.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1465) continues implementation of the policy that errors
during suspend or hibernation should not prevent the system from going
to sleep.

In this case, failure to turn on the Suspend feature for a hub port
shouldn't be reported as an error.  There are situations where this
does actually occur (such as when the device plugged into that port
was disconnected in the recent past), and it turns out to be harmless.
There's no reason for it to prevent a system sleep.

Also, don't allow the hub driver to fail a system suspend if the
downstream ports aren't all suspended.  This is also harmless (and
should never happen, given the change mentioned above); printing a
warning message in the kernel log is all we really need to do.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Following the loss of David Brownell, I volunteer to maintain the
ohci-hcd and ehci-hcd drivers.  This patch (as1472) makes it official.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If the size of the firmware exceeds TI_FIRMWARE_BUF_SIZE we'll leak 'fw_p'
by failing to call release_firmware().
This patch fixes the leak.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-greg' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb:
  usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO
  usb: musb: host: compare status for negative error values

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Record actual last user of freed objects.
  slub: always align cpu_slab to honor cmpxchg_double requirement

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: unwind canceled flock state
  ceph: fix ENOENT logic in striped_read
  ceph: fix short sync reads from the OSD
  ceph: fix sync vs canceled write
  ceph: use ihold when we already have an inode ref

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: Staticize non-exported __rtc_set_alarm()
  rtc: Fix ioctl error path return
  ptp: Fix some locking bugs in ptp_read()
  ptp: Return -EFAULT on copy_to_user() errors

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: Revert 8ab2b7ef ftrace: Remove unnecessary disabling of irqs
  kprobes/trace: Fix kprobe selftest for gcc 4.6
  ftrace: Fix possible undefined return code
  oprofile, dcookies: Fix possible circular locking dependency
  oprofile: Fix locking dependency in sync_start()
  oprofile: Free potentially owned tasks in case of errors
  oprofile, x86: Add comments to IBS LVT offset initialization

Merge branches 'x86-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub
  x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Prevent potential NULL dereference in irq_set_irq_wake()

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-pl022: Add missing return value update

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C2410: remove the now empty mach-s3c2410/irq.c
  ARM: S3C24XX: Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c
  ARM: S3C24xx: Fix missing struct for s3c2410_dma_chan
  ARM: SAMSUNG: Remove unused onenand plat functions
  ARM: EXYNOS4: Remove compiler warning on exynos4_pwm4_resume
  ARM: S5P: Fix compilation error for exynos4_defconfig
  ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XX
  ARM: S5P64X0: Fix SPI platform device name
  ARM: S5PV210: Fix possible null pointer dereference

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix problem in setting checkpoint interval
  nilfs2: fix missing block address termination in btree node shrinking
  nilfs2: fix incorrect block address termination in node concatenation

Return error on out of range cpsdvsr value.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: use join_transaction in btrfs_evict_inode()
  Btrfs - use %pU to print fsid
  Btrfs: fix extent state leak on failed nodatasum reads
  btrfs: fix unlocked access of delalloc_inodes
  Btrfs: avoid stack bloat in btrfs_ioctl_fs_info()
  btrfs: remove 64bit alignment padding to allow extent_buffer to fit into one fewer cacheline
  Btrfs: clear current->journal_info on async transaction commit
  Btrfs: make sure to recheck for bitmaps in clusters
  btrfs: remove unneeded includes from scrub.c
  btrfs: reinitialize scrub workers
  btrfs: scrub: errors in tree enumeration
  Btrfs: don't map extent buffer if path->skip_locking is set
  Btrfs: unlock the trans lock properly
  Btrfs: don't map extent buffer if path->skip_locking is set
  Btrfs: fix duplicate checking logic
  Btrfs: fix the allocator loop logic
  Btrfs: fix bitmap regression
  Btrfs: don't commit the transaction if we dont have enough pinned bytes
  Btrfs: noinline the cluster searching functions
  Btrfs: cache bitmaps when searching for a cluster

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop
  ALSA: Use %pV for snd_printk()
  ALSA: hda - Fix initialization of hp pins with master_mute in Realtek
  ALSA: hda - Fix invalid unsol tag for some alc262 model quirks
  ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register
  ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context
  ASoC: fsl: fix initialization of DMA buffers
  ASoC: WM8804 does not support sample rates below 32kHz
  ASoC: Fix WM8962 headphone volume update for use of advanced caches
  ASoC: Blackfin: bf5xx-ad1836: Fix codec device name
  ALSA: hda: Fix quirk for Dell Inspiron 910
  ASoC: AD1836: Fix setting the PCM format
  ASoC: Check for NULL register bank in snd_soc_get_cache_val()
  ASoC: Add missing break in WM8915 FLL source selection
  ASoC: Only update SYSCLK_ENA when pausing WM8915 SYSCLK
  ASoC: atmel_ssc: Don't try to free ssc if request failed

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide-cd: signedness warning fix again

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio/basic_mmio: add missing include of spinlock_types.h
  gpio/nomadik: fix sleepmode for elder Nomadik

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits)
  ISDN, hfcsusb: Don't leak in hfcsusb_ph_info()
  netpoll: call dev_put() on error in netpoll_setup()
  net: ep93xx_eth: fix DMA API violations
  net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()
  net: ep93xx_eth: allocate buffers using kmalloc()
  net: ep93xx_eth: pass struct device to DMA API functions
  ep93xx: set DMA masks for the ep93xx_eth
  vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check
  dl2k: EEPROM CRC calculation wrong endianess on bigendian machine
  NET: am79c961: fix assembler warnings
  NET: am79c961: ensure multicast filter is correctly set at open
  NET: am79c961: ensure asm() statements are marked volatile
  ethtool.h: fix typos
  ep93xx_eth: Update MAINTAINERS
  ipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data
  netpoll: prevent netpoll setup on slave devices
  net: pmtu_expires fixes
  gianfar:localized filer table
  iwlegacy: fix channel switch locking
  mac80211: fix IBSS teardown race
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  AppArmor: Fix sleep in invalid context from task_setrlimit

We leak the memory allocated to 'phi' when the variable goes out of scope
in hfcsusb_ph_info().
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a dev_put(ndev) missing on an error path.  This was
introduced in 0c1ad04a "netpoll: prevent netpoll setup on slave
devices".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King said:
>
> So, to summarize what its doing:
>
> 1. It allocates buffers for rx and tx.
> 2. It maps them with dma_map_single().
>       This transfers ownership of the buffer to the DMA device.
> 3. In ep93xx_xmit,
> 3a. It copies the data into the buffer with skb_copy_and_csum_dev()
>       This violates the DMA buffer ownership rules - the CPU should
>       not be writing to this buffer while it is (in principle) owned
>       by the DMA device.
> 3b. It then calls dma_sync_single_for_cpu() for the buffer.
>       This transfers ownership of the buffer to the CPU, which surely
>       is the wrong direction.
> 4. In ep93xx_rx,
> 4a. It calls dma_sync_single_for_cpu() for the buffer.
>       This at least transfers the DMA buffer ownership to the CPU
>       before the CPU reads the buffer
> 4b. It then uses skb_copy_to_linear_data() to copy the data out.
>       At no point does it transfer ownership back to the DMA device.
> 5. When the driver is removed, it dma_unmap_single()'s the buffer.
>       This transfers ownership of the buffer to the CPU.
> 6. It frees the buffer.
>
> While it may work on ep93xx, it's not respecting the DMA API rules,
> and with DMA debugging enabled it will probably encounter quite a few
> warnings.

This patch fixes these violations.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a197b59a (mm: fail GFP_DMA allocations when ZONE_DMA is not
configured) made page allocator to return NULL if GFP_DMA is set but
CONFIG_ZONE_DMA is disabled.

This causes ep93xx_eth to fail:

 WARNING: at mm/page_alloc.c:2251 __alloc_pages_nodemask+0x11c/0x638()
 Modules linked in:
 [<c0035498>] (unwind_backtrace+0x0/0xf4) from [<c0043da4>] (warn_slowpath_common+0x48/0x60)
 [<c0043da4>] (warn_slowpath_common+0x48/0x60) from [<c0043dd8>] (warn_slowpath_null+0x1c/0x24)
 [<c0043dd8>] (warn_slowpath_null+0x1c/0x24) from [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638)
 [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638) from [<c00366fc>] (__dma_alloc+0x8c/0x3ec)
 [<c00366fc>] (__dma_alloc+0x8c/0x3ec) from [<c0036adc>] (dma_alloc_coherent+0x54/0x60)
 [<c0036adc>] (dma_alloc_coherent+0x54/0x60) from [<c0227808>] (ep93xx_open+0x20/0x864)
 [<c0227808>] (ep93xx_open+0x20/0x864) from [<c0283144>] (__dev_open+0xb8/0x108)
 [<c0283144>] (__dev_open+0xb8/0x108) from [<c0280528>] (__dev_change_flags+0x70/0x128)
 [<c0280528>] (__dev_change_flags+0x70/0x128) from [<c0283054>] (dev_change_flags+0x10/0x48)
 [<c0283054>] (dev_change_flags+0x10/0x48) from [<c001a720>] (ip_auto_config+0x190/0xf68)
 [<c001a720>] (ip_auto_config+0x190/0xf68) from [<c00233b0>] (do_one_initcall+0x34/0x18c)
 [<c00233b0>] (do_one_initcall+0x34/0x18c) from [<c0008400>] (kernel_init+0x94/0x134)
 [<c0008400>] (kernel_init+0x94/0x134) from [<c0030858>] (kernel_thread_exit+0x0/0x8)

Since there is no restrictions for DMA on ep93xx, we can fix this by just
removing the GFP_DMA flag from the call.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can use simply kmalloc() to allocate the buffers. This also simplifies the
code and allows us to perform DMA sync operations more easily.

Memory is allocated with only GFP_KERNEL since there are no DMA allocation
restrictions on this platform.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

We shouldn't use NULL for any DMA API functions, unless we are dealing with
ISA or EISA device. So pass correct struct dev pointer to these functions.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the driver uses the DMA API, we should pass it valid DMA masks.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Testing of VLAN_FLAG_REORDER_HDR does not belong in vlan_untag
but rather in vlan_do_receive.  Otherwise the vlan header
will not be properly put on the packet in the case of
vlan header accelleration.

As we remove the check from vlan_check_reorder_header
rename it vlan_reorder_header to keep the naming clean.

Fix up the skb->pkt_type early so we don't look at the packet
after adding the vlan tag, which guarantees we don't goof
and look at the wrong field.

Use a simple if statement instead of a complicated switch
statement to decided that we need to increment rx_stats
for a multicast packet.

Hopefully at somepoint we will just declare the case where
VLAN_FLAG_REORDER_HDR is cleared as unsupported and remove
the code.  Until then this keeps it working correctly.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix:
/tmp/ccvoZ6h8.s: Assembler messages:
/tmp/ccvoZ6h8.s:284: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:881: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:1087: Warning: register range not in ascending order

by ensuring that we have temporary variables placed into specific
registers.  Reorder the code a bit to allow the resulting assembly
to be slightly more optimal.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were clearing out the multicast filter whenever the interface was
upped, and not setting the mode bits correctly.  This can cause
problems if there are any multicast addresses already set at this
point, or if ALLMULTI was set.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without this the compiler can (and does) optimize register reads away
from within loops, and other such optimizations.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the legit warnings 'make W=3 drivers/ide/ide-cd.c'
generates is:
drivers/ide/ide-cd.c: In function ide_cd_do_request
drivers/ide/ide-cd.c:828:2: warning: conversion to int from \
unsigned int may change the sign of the result
drivers/ide/ide-cd.c:833:2: warning: conversion to int from \
unsigned int may change the sign of the result

nsectors is declared int, should be unsigned int.

blk_rq_sectors() returns unsigned int, and ide_complete_rq
expects unsigned int as well.  Fixes both warnings.
Signed-off-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It uses cpu_relax(), and so needs <asm/processor.h>

Without this patch, I see:

   CC      arch/mn10300/kernel/asm-offsets.s
  In file included from include/linux/time.h:8,
                   from include/linux/timex.h:56,
                   from include/linux/sched.h:57,
                   from arch/mn10300/kernel/asm-offsets.c:7:
  include/linux/seqlock.h: In function 'read_seqbegin':
  include/linux/seqlock.h:91: error: implicit declaration of function 'cpu_relax'

whilst building asb2364_defconfig on MN10300.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The WARN_ON() in start_transaction() was triggered while balancing.

The cause is btrfs_relocate_chunk() started a transaction and
then called iput() on the inode that stores free space cache,
and iput() called btrfs_start_transaction() again.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Checkpoint generation interval of nilfs goes wrong after user has
changed the interval parameter with nilfs-tune tool.

 segctord starting. Construction interval = 5 seconds,
 CP frequency < 30 seconds
 segctord starting. Construction interval = 0 seconds,
 CP frequency < 30 seconds

This turned out to be caused by a trivial bug in initialization code
of log writer.  This will fix it.
Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

nilfs_btree_delete function does not terminate part of virtual block
addresses when shrinking the last remaining child node into the root
node.  The missing address termination causes that dead btree node
blocks persist and chip away free disk space.

This fixes the leak bug on the btree node deletion.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

nilfs_btree_delete function wrongly terminates virtual block address
of the btree node held by its parent at index 0.  When concatenating
the index-0 node with its right sibling node, nilfs_btree_delete
terminates the block address of index-0 node instead of the right
sibling node which should be deleted.

This bug not only wears disk space in the long run, but also causes
file system corruption.  This will fix it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Get rid of FIXME comment.  Uuids from dmesg are now the same as uuids
given by btrfs-progs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>