Add hw monitor volume control for POD HD500. The same change may
work for HD500X but I don't have it to test.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200713152852.65832-1-anarsoul@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

A few places (except for ASoC) are left unconverted for the new
fallthrough pseudo keyword.  Now replace them all.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The "fall through" comments found in switch-cases in ALSA xen driver
are all superfluous.  The kernel coding style allows the multiple
cases in a row.  Let's remove them.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The comments about fall through in sound/atmel/ac97.c are just
superfluous and rather confusing.  Let's remove them.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200708203236.GA5112@embeddedorSigned-off-by: Takashi Iwai <tiwai@suse.de>

Distorted audio appears occasionally, affecting either playback or
capture and requiring the affected substream to be closed by all
applications and re-opened.

The best way I have found to reproduce the bug is to use dmix in
combination with Chromium, which opens the audio device multiple times
in threads. Anecdotally, the problems appear to have increased with
faster CPUs. I ruled out 32-bit counter wrapping; it often happens
much earlier.

Since applying this patch I have not had problems, where previously
they would occur several times a day.

The patch targets the following issues:

* Check for progress using the counter from the hardware, not after it
  has been truncated to the buffer.

  This is a clean way to address a possible bug where if a whole
  ringbuffer advances between interrupts, it goes unnoticed.

* Move last_period state from chip to pipe

  This more logically belongs as part of pipe, and code is reasier to
  read if it is "counter position last time a period elapsed".

  Now the code has no references to period count. A period is just
  when the regular counter crosses a threshold. This increases
  readability and reduces scope for bugs.

* Treat period notification and buffer advance independently:

  This helps to clarify what is the responsibility of the interrupt
  handler, and what is pcm_pointer().

  Removing shared state between these operations means race conditions
  are fixed without introducing locks. Synchronisation is only around
  the read of pipe->dma_counter. There may be cache line contention
  around "struct audiopipe" but I did not have cause to profile this.

Pay attention to be robust where dma_counter wrapping is not a
multiple of period_size or buffer_size.

This is a revised patch based on feedback from Takashi and Giuliano.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-5-mark@xwax.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

These are valid conditions in normal circumstances, so do not "warn" but
make them for debugging.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-4-mark@xwax.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The function uses chip->comm_page which needs locking against
other use at the same time.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-3-mark@xwax.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use of atomics does not make these statements robust:

       atomic_inc(&chip->opencount);
       if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
               chip->can_set_rate=0;

and

       if (atomic_read(&chip->opencount)) {
               if (chip->opencount) {
                       changed = -EAGAIN;
               } else {
                       changed = set_digital_mode(chip, dmode);

It would be necessary to atomically increment or decrement the value
and use the returned result. And yet we still need to prevent other
threads making use of "can_set_rate" while we set it.

However in all but one case the atomic is misleading as they are already
running with "mode_mutex" held.

Decisions are made on mode setting are often intrinsically connected
to "opencount" because some operations are not permitted unless
there is sole ownership.

So instead simplify this, and use "mode_mutex" as a lock for all reference
counting and mode setting.
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-2-mark@xwax.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

This check is always false, as it's not the responsibilty of the
device-specific code to make this check. It is already checked
in snd_echo_digital_mode_put.

I do not have a Mona interface to test this change.

This patch is in preparation for follow-up patch to modify the
behavior of "opencount".
Signed-off-by: Mark Hills <mark@xwax.org>
Link: https://lore.kernel.org/r/20200708101848.3457-1-mark@xwax.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. Variables are declared in a header file included from
multiple C files, replace by #defines as suggested by Takashi

sound/usb/line6/driver.h:70:18: warning: ‘SYSEX_EXTRA_SIZE’ defined
but not used [-Wunused-const-variable=]
   70 | static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
      |                  ^~~~~~~~~~~~~~~~
sound/usb/line6/driver.h:69:18: warning: ‘SYSEX_DATA_OFS’ defined but
   not used [-Wunused-const-variable=]
   69 | static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
      |                  ^~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707184924.96291-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The commit 3ad796cb ("ALSA: pcm: Use SG-buffer only when direct
DMA is available") introduced a check of the DMA type and this caused
a build error on m68k (and possibly some others) due to the lack of
dma_is_direct() definition.  Since the check is needed only for
CONFIG_SND_DMA_SGBUF enablement (i.e. solely x86), use #ifdef instead
of IS_ENABLED() for avoiding such a build error.

Fixes: 3ad796cb ("ALSA: pcm: Use SG-buffer only when direct DMA is available")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200707111225.26826-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

External HDMI receivers have analog circuitry that needs to be powered-on
when exiting standby, and a mechanism to detect PCM v. IEC61937 data.
These two steps take time and up to 2-3 seconds of audio may be muted
when starting playback.

Intel hardware (Haswell and beyond) can keep the link active
with a 'silent stream', so that the receiver does not go through those
two steps when valid audio is transmitted. This mechanism relies
on an setting the channel_id as 0xf, sending info packet and preventing
the codec from going to D3,  which will increase the platform
static power consumption. The info packet assumes a basic 2ch stereo,
and the silent stream is enabled when connecting a monitor.
In case of format changes the detection of PCM v. IEC61937 needs to
be re-run. In this case there is no way to avoid the 2-3s mute.

The silent stream is enabled with a Kconfig option, as well as a kernel
parameter should there be a need to override the build time default.
This approach is used based on the power_save capability as an example,
but in the future, it may be used with a kcontrol,
depending on UCM support for HDaudio legacy.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Emmanuel Jillela <emmanuel.jillela@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1594068797-14011-1-git-send-email-harshapriya.n@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. Mark all unused tables with __maybe_unused.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-24-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning.

sound/drivers/vx/vx_core.c: In function ‘snd_vx_threaded_irq_handler’:
sound/drivers/vx/vx_core.c:515:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
  515 |   ; /* so far, nothing to do yet */
      |   ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-23-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings - add missing context parameter in description
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-22-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. Mark variables as __always_unused.

sound/pci/via82xx.c: In function ‘snd_via82xx_codec_wait’:
sound/pci/via82xx.c:547:6: warning: variable ‘err’ set but not used
[-Wunused-but-set-variable]
  547 |  int err;
      |      ^~~
sound/pci/via82xx_modem.c: In function ‘snd_via82xx_codec_wait’:
sound/pci/via82xx_modem.c:401:6: warning: variable ‘err’ set but not
used [-Wunused-but-set-variable]
  401 |  int err;
      |      ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-21-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings, add missing field descriptions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-20-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. Mark the 'audiostatus' variable as __always_unused.

sound/pci/es1938.c: In function ‘snd_es1938_interrupt’:
sound/pci/es1938.c:1622:24: warning: variable ‘audiostatus’ set but
not used [-Wunused-but-set-variable]
 1622 |  unsigned char status, audiostatus;
      |                        ^~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-19-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. Mark the 'req' variable as __always_unused.

sound/xen/xen_snd_front.c: In function ‘xen_snd_front_stream_close’:
sound/xen/xen_snd_front.c:117:21: warning: variable ‘req’ set but not
used [-Wunused-but-set-variable]
  117 |  struct xensnd_req *req;
      |                     ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-18-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings:

sound/pci/oxygen/xonar_wm87x6.c: In function ‘wm8776_write’:
sound/pci/oxygen/xonar_wm87x6.c:119:11: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
  119 |   if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER)
      |           ^~
sound/pci/oxygen/xonar_wm87x6.c: In function ‘wm8766_write’:
sound/pci/oxygen/xonar_wm87x6.c:147:12: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
  147 |   if ((reg >= WM8766_LDA1 && reg <= WM8766_RDA1) ||
      |            ^~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-17-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning:

sound/pci/rme9652/hdspm.c: In function ‘hdspm_autosync_ref’:
sound/pci/rme9652/hdspm.c:3030:16: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
 3030 |   if ((syncref >= HDSPM_AES32_AUTOSYNC_FROM_WORD) &&
      |                ^~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-16-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. Two variables are only used for debug logs, mark
with __maybe_unused:

sound/pci/korg1212/korg1212.c: In function ‘snd_korg1212_create’:
sound/pci/korg1212/korg1212.c:2152:36: warning: variable ‘iomem2_size’
set but not used [-Wunused-but-set-variable]
 2152 |  unsigned ioport_size, iomem_size, iomem2_size;
      |                                    ^~~~~~~~~~~
sound/pci/korg1212/korg1212.c:2152:11: warning: variable ‘ioport_size’
set but not used [-Wunused-but-set-variable]
 2152 |  unsigned ioport_size, iomem_size, iomem2_size;
      |           ^~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-15-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. The loopsize variable is only used in compiled-out
code, so mark with __maybe_unused.

sound/pci/emu10k1/emu10k1_patch.c: In function
‘snd_emu10k1_sample_new’:
sound/pci/emu10k1/emu10k1_patch.c:30:22: warning: variable ‘loopsize’
set but not used [-Wunused-but-set-variable]
   30 |  int truesize, size, loopsize, blocksize;
      |                      ^~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-14-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. Remove excess function parameter from description

Fixes: 7bc93821 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-13-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. Mark variables used for reads as __always_unused.

sound/pci/emu10k1/emu10k1_main.c: In function
‘snd_emu10k1_cardbus_init’:
sound/pci/emu10k1/emu10k1_main.c:626:15: warning: variable ‘value’ set
but not used [-Wunused-but-set-variable]
  626 |  unsigned int value;
      |               ^~~~~
sound/pci/emu10k1/emu10k1_main.c: In function
‘snd_emu1010_load_firmware_entry’:
sound/pci/emu10k1/emu10k1_main.c:656:15: warning: variable
‘write_post’ set but not used [-Wunused-but-set-variable]
  656 |  unsigned int write_post;
      |               ^~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-12-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. The files contain formatting that isn't kernel-doc.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-10-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. Add missing arguments and description.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-9-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning by nothing variable as always unused.

sound/pci/aw2/aw2-saa7146.c: In function ‘snd_aw2_saa7146_interrupt’:
sound/pci/aw2/aw2-saa7146.c:333:15: warning: variable ‘iicsta’ set but
not used [-Wunused-but-set-variable]
  333 |  unsigned int iicsta;
      |               ^~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. One variable is only used in a conditionally-compiled
block, mark as __maybe_unused

sound/pci/echoaudio/echoaudio.c: In function ‘snd_echo_probe’:
sound/pci/echoaudio/echoaudio.c:1958:6: warning: variable ‘i’ set but
not used [-Wunused-but-set-variable]
 1958 |  int i, err;
      |      ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings, mark variables as __always_unused

sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_get’:
sound/pci/asihpi/asihpi.c:1907:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
 1907 |  u32 num_bands;
      |      ^~~~~~~~~
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_put’:
sound/pci/asihpi/asihpi.c:1934:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
 1934 |  u32 num_bands;
      |      ^~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings. The code certainly predates .rst syntax, adjust as
needed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings by removing 2 unnecessary initializations and
removing a variable that's not used.

sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_get’:
sound/pci/asihpi/asihpi.c:1907:6: warning: variable ‘num_bands’ set
but not used [-Wunused-but-set-variable]
 1907 |  u32 num_bands = 0;
      |      ^~~~~~~~~
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_tuner_band_put’:
sound/pci/asihpi/asihpi.c:1934:6: warning: variable ‘num_bands’ set
 but not used [-Wunused-but-set-variable]
 1934 |  u32 num_bands = 0;
      |      ^~~~~~~~~
sound/pci/asihpi/asihpi.c: In function ‘snd_asihpi_mux_info’:
sound/pci/asihpi/asihpi.c:2164:6: warning: variable ‘err’ set but not
 used [-Wunused-but-set-variable]
 2164 |  int err;
      |      ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning by noting variable as __always_unused.

sound/isa/gus/gus_uart.c: In function ‘snd_gf1_interrupt_midi_in’:
sound/isa/gus/gus_uart.c:16:22: warning: variable ‘data’ set but not
used [-Wunused-but-set-variable]
   16 |  unsigned char stat, data, byte;
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warnings by adding prototypes to header file

sound/isa/gus/gus_timer.c:141:6: warning: no previous prototype for
‘snd_gf1_timers_init’ [-Wmissing-prototypes]
  141 | void snd_gf1_timers_init(struct snd_gus_card * gus)
      |      ^~~~~~~~~~~~~~~~~~~
sound/isa/gus/gus_timer.c:177:6: warning: no previous prototype for
‘snd_gf1_timers_done’ [-Wmissing-prototypes]
  177 | void snd_gf1_timers_done(struct snd_gus_card * gus)
      |      ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193604.169059-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Also documented the galpess transitions. Please note that these are not
really stream states, but show how the stream steps in gapless mode
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-3-vkoul@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

So we had some discussions of the stream states, so I thought it is a
good idea to document the state transitions, so add it documentation
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-2-vkoul@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix kconfig warnings and lots of subsequent build errors by
adding yet another ugly select statement:

WARNING: unmet direct dependencies detected for LEDS_CLASS
  Depends on [n]: NEW_LEDS [=n]
  Selected by [y]:
  - SND_HDA_GENERIC [=y] && SOUND [=y] && !UML && SND [=y] && SND_HDA [=y] && SND_HDA_GENERIC_LEDS [=y]

WARNING: unmet direct dependencies detected for LEDS_TRIGGERS
  Depends on [n]: NEW_LEDS [=n] && LEDS_CLASS [=y]
  Selected by [y]:
  - SND_HDA_GENERIC [=y] && SOUND [=y] && !UML && SND [=y] && SND_HDA [=y] && SND_HDA_GENERIC_LEDS [=y]
  Selected by [m]:
  - MAC80211_LEDS [=y] && NET [=y] && WIRELESS [=y] && MAC80211 [=m] && LEDS_CLASS [=y]
  - IWLWIFI_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_INTEL [=y] && IWLWIFI [=m] && (LEDS_CLASS [=y]=y || LEDS_CLASS [=y]=IWLWIFI [=m]) && (IWLMVM [=m] || IWLDVM [=m])

WARNING: unmet direct dependencies detected for LEDS_TRIGGER_AUDIO
  Depends on [n]: NEW_LEDS [=n] && LEDS_TRIGGERS [=y]
  Selected by [y]:
  - SND_HDA_GENERIC [=y] && SOUND [=y] && !UML && SND [=y] && SND_HDA [=y] && SND_HDA_GENERIC_LEDS [=y]

Fixes: 7cdf8c49 ("ALSA: hda: generic: Add a helper for mic-mute LED with LED classdev")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/01233744-9625-38b3-0342-1b37250dbc72@infradead.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix W=1 warning. The kernel doc uses the hwparams type instead of the
argument name.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200702193842.169215-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix the following typos in comments and in the code:
 - KHz -> kHz
 - procssed -> processed
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200629032607.255419-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>