Pull cpuset changes from Tejun Heo:
 "cpuset has always been rather odd about its configurations - a cgroup
  right after creation didn't allow any task executions before
  configuration, changing configuration in the parent modifies the
  descendants irreversibly and so on.  These behaviors are inherently
  nasty and almost hostile against sharing the hierarchy with other
  controllers making it very difficult to use in unified hierarchy.

  Li is currently in the process of updating the behaviors for
  __DEVEL__sane_behavior which is the bulk of changes in this pull
  request.  It isn't complete yet and the behaviors will change further
  but all changes are gated behind sane_behavior.  In the process, the
  rather hairy work-item punting which was used to work around the
  limitations of cgroup descendant iterator was simplified."

* 'for-3.11-cpuset' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: rename @cont to @cgrp
  cpuset: fix to migrate mm correctly in a corner case
  cpuset: allow to move tasks to empty cpusets
  cpuset: allow to keep tasks in empty cpusets
  cpuset: introduce effective_{cpumask|nodemask}_cpuset()
  cpuset: record old_mems_allowed in struct cpuset
  cpuset: remove async hotplug propagation work
  cpuset: let hotplug propagation work wait for task attaching
  cpuset: re-structure update_cpumask() a bit
  cpuset: remove cpuset_test_cpumask()
  cpuset: remove unnecessary variable in cpuset_attach()
  cpuset: cleanup guarantee_online_{cpus|mems}()
  cpuset: remove redundant check in cpuset_cpus_allowed_fallback()

Pull cgroup changes from Tejun Heo:
 "This pull request contains the following changes.

   - cgroup_subsys_state (css) reference counting has been converted to
     percpu-ref.  css is what each resource controller embeds into its
     own control structure and perform reference count against.  It may
     be used in hot paths of various subsystems and is similar to module
     refcnt in that aspect.  For example, block-cgroup's css refcnting
     was showing up a lot in Mikulaus's device-mapper scalability work
     and this should alleviate it.

   - cgroup subtree iterator has been updated so that RCU read lock can
     be released after grabbing reference.  This allows simplifying its
     users which requires blocking which used to build iteration list
     under RCU read lock and then traverse it outside.  This pull
     request contains simplification of cgroup core and device-cgroup.
     A separate pull request will update cpuset.

   - Fixes for various bugs including corner race conditions and RCU
     usage bugs.

   - A lot of cleanups and some prepartory work for the planned unified
     hierarchy support."

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (48 commits)
  cgroup: CGRP_ROOT_SUBSYS_BOUND should also be ignored when mounting an existing hierarchy
  cgroup: CGRP_ROOT_SUBSYS_BOUND should be ignored when comparing mount options
  cgroup: fix deadlock on cgroup_mutex via drop_parsed_module_refcounts()
  cgroup: always use RCU accessors for protected accesses
  cgroup: fix RCU accesses around task->cgroups
  cgroup: fix RCU accesses to task->cgroups
  cgroup: grab cgroup_mutex in drop_parsed_module_refcounts()
  cgroup: fix cgroupfs_root early destruction path
  cgroup: reserve ID 0 for dummy_root and 1 for unified hierarchy
  cgroup: implement for_each_[builtin_]subsys()
  cgroup: move init_css_set initialization inside cgroup_mutex
  cgroup: s/for_each_subsys()/for_each_root_subsys()/
  cgroup: clean up find_css_set() and friends
  cgroup: remove cgroup->actual_subsys_mask
  cgroup: prefix global variables with "cgroup_"
  cgroup: convert CFTYPE_* flags to enums
  cgroup: rename cont to cgrp
  cgroup: clean up cgroup_serial_nr_cursor
  cgroup: convert cgroup_cft_commit() to use cgroup_for_each_descendant_pre()
  cgroup: make serial_nr_cursor available throughout cgroup.c
  ...

Pull workqueue changes from Tejun Heo:
 "Surprisingly, Lai and I didn't break too many things implementing
  custom pools and stuff last time around and there aren't any follow-up
  changes necessary at this point.

  The only change in this pull request is Viresh's patches to make some
  per-cpu workqueues to behave as unbound workqueues dependent on a boot
  param whose default can be configured via a config option.  This leads
  to higher processing overhead / lower bandwidth as more work items are
  bounced across CPUs; however, it can lead to noticeable powersave in
  certain configurations - ~10% w/ idlish constant workload on a
  big.LITTLE configuration according to Viresh.

  This is because per-cpu workqueues interfere with how the scheduler
  perceives whether or not each CPU is idle by forcing pinned tasks on
  them, which makes the scheduler's power-aware scheduling decisions
  less effective.

  Its effectiveness is likely less pronounced on homogenous
  configurations and this type of optimization can probably be made
  automatic; however, the changes are pretty minimal and the affected
  workqueues are clearly marked, so it's an easy gain for some
  configurations for the time being with pretty unintrusive changes."

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  fbcon: queue work on power efficient wq
  block: queue work on power efficient wq
  PHYLIB: queue work on system_power_efficient_wq
  workqueue: Add system wide power_efficient workqueues
  workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues

Pull per-cpu changes from Tejun Heo:
 "This pull request contains Kent's per-cpu reference counter.  It has
  gone through several iterations since the last time and the dynamic
  allocation is gone.

  The usual usage is relatively straight-forward although async kill
  confirm interface, which is not used int most cases, is somewhat icky.
  There also are some interface concerns - e.g.  I'm not sure about
  passing in @relesae callback during init as that becomes funny when we
  later implement synchronous kill_and_drain - but nothing too serious
  and it's quite useable now.

  cgroup_subsys_state refcnting has already been converted and we should
  convert module refcnt (Kent?)"

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu-refcount: use RCU-sched insted of normal RCU
  percpu-refcount: implement percpu_tryget() along with percpu_ref_kill_and_confirm()
  percpu-refcount: implement percpu_ref_cancel_init()
  percpu-refcount: add __must_check to percpu_ref_init() and don't use ACCESS_ONCE() in percpu_ref_kill_rcu()
  percpu-refcount: cosmetic updates
  percpu-refcount: consistently use plain (non-sched) RCU
  percpu-refcount: Don't use silly cmpxchg()
  percpu: implement generic percpu refcounting

Pull x86 UV update from Ingo Molnar:
 "There's a single commit in this tree, which adds support for a new SGI
  UV GRU (Global Reference Unit - fast NUMA messaging ASIC) hardware
  feature to scale up and beyond: an optional distributed mode that will
  allow per-node address mapping of local GRU space, as opposed to
  mapping all GRU hardware to the same contiguous high space"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Add GRU distributed mode mappings

Pull x86 tracing updates from Ingo Molnar:
 "This tree adds IRQ vector tracepoints that are named after the handler
  and which output the vector #, based on a zero-overhead approach that
  relies on changing the IDT entries, by Seiji Aguchi.

  The new tracepoints look like this:

   # perf list | grep -i irq_vector
    irq_vectors:local_timer_entry                      [Tracepoint event]
    irq_vectors:local_timer_exit                       [Tracepoint event]
    irq_vectors:reschedule_entry                       [Tracepoint event]
    irq_vectors:reschedule_exit                        [Tracepoint event]
    irq_vectors:spurious_apic_entry                    [Tracepoint event]
    irq_vectors:spurious_apic_exit                     [Tracepoint event]
    irq_vectors:error_apic_entry                       [Tracepoint event]
    irq_vectors:error_apic_exit                        [Tracepoint event]
   [...]"

* 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tracing: Add config option checking to the definitions of mce handlers
  trace,x86: Do not call local_irq_save() in load_current_idt()
  trace,x86: Move creation of irq tracepoints from apic.c to irq.c
  x86, trace: Add irq vector tracepoints
  x86: Rename variables for debugging
  x86, trace: Introduce entering/exiting_irq()
  tracing: Add DEFINE_EVENT_FN() macro

Pull x86 RAS update from Ingo Molnar:
 "The changes in this tree are:

   - ACPI APEI (ACPI Platform Error Interface) improvements, by Chen
     Gong
   - misc MCE fixes/cleanups"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Update MCE severity condition check
  mce: acpi/apei: Add comments to clarify usage of the various bitfields in the MCA subsystem
  ACPI/APEI: Update einj documentation for param1/param2
  ACPI/APEI: Add parameter check before error injection
  ACPI, APEI, EINJ: Fix error return code in einj_init()
  x86, mce: Fix "braodcast" typo

Pull x86 platform updates from Ingo Molnar:
 "Two changes:

   - A Kconfig dependency fix/cleanup

   - Introduce the 'make kvmconfig' KVM configuration helper utility
     that turns the current .config into a KVM-bootable config.  Useful
     for debugging specific native kernel configs that have no KVM
     config options enabled on VM setups."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform: Make X86_GOLDFISH depend on X86_EXTENDED_PLATFORM
  x86/platform: Add kvmconfig to the phony targets
  x86, platform, kvm, kconfig: Turn existing .config's into KVM-capable configs

Pull x86 mm changes from Ingo Molnar:
 "Misc improvements:

   - Fix /proc/mtrr reporting
   - Fix ioremap printout
   - Remove the unused pvclock fixmap entry on 32-bit
   - misc cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioremap: Correct function name output
  x86: Fix /proc/mtrr with base/size more than 44bits
  ix86: Don't waste fixmap entries
  x86/mm: Drop unneeded include <asm/*pgtable, page*_types.h>
  x86_64: Correct phys_addr in cleanup_highmap comment

Pull x86 microcode loading update from Ingo Molnar:
 "Two main changes that improve microcode loading on AMD CPUs:

   - Add support for all-in-one binary microcode files that concatenate
     the microcode images of multiple processor families, by Jacob Shin

   - Add early microcode loading (embedded in the initrd) support, also
     by Jacob Shin"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, amd: Another early loading fixup
  x86, microcode, amd: Allow multiple families' bin files appended together
  x86, microcode, amd: Make find_ucode_in_initrd() __init
  x86, microcode, amd: Fix warnings and errors on with CONFIG_MICROCODE=m
  x86, microcode, amd: Early microcode patch loading support for AMD
  x86, microcode, amd: Refactor functions to prepare for early loading
  x86, microcode: Vendor abstract out save_microcode_in_initrd()
  x86, microcode, intel: Correct typo in printk

Pull x86 FPU changes from Ingo Molnar:
 "There are two bigger changes in this tree:

   - Add an [early-use-]safe static_cpu_has() variant and other
     robustness improvements, including the new X86_DEBUG_STATIC_CPU_HAS
     configurable debugging facility, motivated by recent obscure FPU
     code bugs, by Borislav Petkov

   - Reimplement FPU detection code in C and drop the old asm code, by
     Peter Anvin."

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, fpu: Use static_cpu_has_safe before alternatives
  x86: Add a static_cpu_has_safe variant
  x86: Sanity-check static_cpu_has usage
  x86, cpu: Add a synthetic, always true, cpu feature
  x86: Get rid of ->hard_math and all the FPU asm fu

Pull x86 EFI changes from Ingo Molnar:
 "Two fixes that should in principle increase robustness of our
  interaction with the EFI firmware, and a cleanup"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: retry ExitBootServices() on failure
  efi: Convert runtime services function ptrs
  UEFI: Don't pass boot services regions to SetVirtualAddressMap()

Pull x86 debug update from Ingo Molnar:
 "Misc debuggability improvements:

   - Optimize the x86 CPU register printout a bit
   - Expose the tboot TXT log via debugfs
   - Small do_debug() cleanup"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tboot: Provide debugfs interfaces to access TXT log
  x86: Remove weird PTR_ERR() in do_debug
  x86/debug: Only print out DR registers if they are not power-on defaults

Pull x86 cpu updates from Ingo Molnar:
 "Two changes:

   - Extend 32-bit double fault debugging aid to 64-bit
   - Fix a build warning"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel/cacheinfo: Shut up last long-standing warning
  x86: Extend #DF debugging aid to 64-bit

Pull x86 cleanups from Ingo Molnar:
 "Misc x86 cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, reloc: Use xorl instead of xorq in relocate_kernel_64.S
  x86, cleanups: Remove extra tab in __flush_tlb_one()
  x86/mce: Remove check for CONFIG_X86_MCE_P4THERMAL

Pull x86 boot build fix from Ingo Molnar:
 "Small fixlet for the build process"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Close opened file descriptor

Pull asm/x86 changes from Ingo Molnar:
 "Misc changes, with a bigger processor-flags cleanup/reorganization by
  Peter Anvin"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, asm, cleanup: Replace open-coded control register values with symbolic
  x86, processor-flags: Fix the datatypes and add bit number defines
  x86: Rename X86_CR4_RDWRGSFS to X86_CR4_FSGSBASE
  x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED
  linux/const.h: Add _BITUL() and _BITULL()
  x86/vdso: Convert use of typedef ctl_table to struct ctl_table
  x86: __force_order doesn't need to be an actual variable

Pull voluntary preemption fixes from Ingo Molnar:
 "This tree contains a speedup which is achieved through better
  might_sleep()/might_fault() preemption point annotations for uaccess
  functions, by Michael S Tsirkin:

  1. The only reason uaccess routines might sleep is if they fault.
     Make this explicit for all architectures.

  2. A voluntary preemption point in uaccess functions means compiler
     can't inline them efficiently, this breaks assumptions that they
     are very fast and small that e.g.  net code seems to make.  Remove
     this preemption point so behaviour matches with what callers
     assume.

  3. Accesses (e.g through socket ops) to kernel memory with KERNEL_DS
     like net/sunrpc does will never sleep.  Remove an unconditinal
     might_sleep() in the might_fault() inline in kernel.h (used when
     PROVE_LOCKING is not set).

  4. Accesses with pagefault_disable() return EFAULT but won't cause
     caller to sleep.  Check for that and thus avoid might_sleep() when
     PROVE_LOCKING is set.

  These changes offer a nice speedup for CONFIG_PREEMPT_VOLUNTARY=y
  kernels, here's a network bandwidth measurement between a virtual
  machine and the host:

   before:
        incoming: 7122.77   Mb/s
        outgoing: 8480.37   Mb/s

   after:
        incoming: 8619.24   Mb/s   [ +21.0% ]
        outgoing: 9455.42   Mb/s   [ +11.5% ]

  I kept these changes in a separate tree, separate from scheduler
  changes, because it's a mixed MM and scheduler topic"

* 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm, sched: Allow uaccess in atomic with pagefault_disable()
  mm, sched: Drop voluntary schedule from might_fault()
  x86: uaccess s/might_sleep/might_fault/
  tile: uaccess s/might_sleep/might_fault/
  powerpc: uaccess s/might_sleep/might_fault/
  mn10300: uaccess s/might_sleep/might_fault/
  microblaze: uaccess s/might_sleep/might_fault/
  m32r: uaccess s/might_sleep/might_fault/
  frv: uaccess s/might_sleep/might_fault/
  arm64: uaccess s/might_sleep/might_fault/
  asm-generic: uaccess s/might_sleep/might_fault/

Pull scheduler updates from Ingo Molnar:
 "The main changes:

   - load-calculation cleanups and improvements, by Alex Shi
   - various nohz related tidying up of statisics, by Frederic
     Weisbecker
   - factor out /proc functions to kernel/sched/proc.c, by Paul
     Gortmaker
   - simplify the RT policy scheduler, by Kirill Tkhai
   - various fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  sched/debug: Remove CONFIG_FAIR_GROUP_SCHED mask
  sched/debug: Fix formatting of /proc/<PID>/sched
  sched: Fix typo in struct sched_avg member description
  sched/fair: Fix typo describing flags in enqueue_entity
  sched/debug: Add load-tracking statistics to task
  sched: Change get_rq_runnable_load() to static and inline
  sched/tg: Remove tg.load_weight
  sched/cfs_rq: Change atomic64_t removed_load to atomic_long_t
  sched/tg: Use 'unsigned long' for load variable in task group
  sched: Change cfs_rq load avg to unsigned long
  sched: Consider runnable load average in move_tasks()
  sched: Compute runnable load avg in cpu_load and cpu_avg_load_per_task
  sched: Update cpu load after task_tick
  sched: Fix sleep time double accounting in enqueue entity
  sched: Set an initial value of runnable avg for new forked task
  sched: Move a few runnable tg variables into CONFIG_SMP
  Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking"
  sched: Don't mix use of typedef ctl_table and struct ctl_table
  sched: Remove WARN_ON(!sd) from init_sched_groups_power()
  sched: Fix memory leakage in build_sched_groups()
  ...

Pull perf updates from Ingo Molnar:
 "Kernel improvements:

   - watchdog driver improvements by Li Zefan
   - Power7 CPI stack events related improvements by Sukadev Bhattiprolu
   - event multiplexing via hrtimers and other improvements by Stephane
     Eranian
   - kernel stack use optimization by Andrew Hunter
   - AMD IOMMU uncore PMU support by Suravee Suthikulpanit
   - NMI handling rate-limits by Dave Hansen
   - various hw_breakpoint fixes by Oleg Nesterov
   - hw_breakpoint overflow period sampling and related signal handling
     fixes by Jiri Olsa
   - Intel Haswell PMU support by Andi Kleen

  Tooling improvements:

   - Reset SIGTERM handler in workload child process, fix from David
     Ahern.
   - Makefile reorganization, prep work for Kconfig patches, from Jiri
     Olsa.
   - Add automated make test suite, from Jiri Olsa.
   - Add --percent-limit option to 'top' and 'report', from Namhyung
     Kim.
   - Sorting improvements, from Namhyung Kim.
   - Expand definition of sysfs format attribute, from Michael Ellerman.

  Tooling fixes:

   - 'perf tests' fixes from Jiri Olsa.
   - Make Power7 CPI stack events available in sysfs, from Sukadev
     Bhattiprolu.
   - Handle death by SIGTERM in 'perf record', fix from David Ahern.
   - Fix printing of perf_event_paranoid message, from David Ahern.
   - Handle realloc failures in 'perf kvm', from David Ahern.
   - Fix divide by 0 in variance, from David Ahern.
   - Save parent pid in thread struct, from David Ahern.
   - Handle JITed code in shared memory, from Andi Kleen.
   - Fixes for 'perf diff', from Jiri Olsa.
   - Remove some unused struct members, from Jiri Olsa.
   - Add missing liblk.a dependency for python/perf.so, fix from Jiri
     Olsa.
   - Respect CROSS_COMPILE in liblk.a, from Rabin Vincent.
   - No need to do locking when adding hists in perf report, only 'top'
     needs that, from Namhyung Kim.
   - Fix alignment of symbol column in in the hists browser (top,
     report) when -v is given, from NAmhyung Kim.
   - Fix 'perf top' -E option behavior, from Namhyung Kim.
   - Fix bug in isupper() and islower(), from Sukadev Bhattiprolu.
   - Fix compile errors in bp_signal 'perf test', from Sukadev
     Bhattiprolu.

  ... and more things"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (102 commits)
  perf/x86: Disable PEBS-LL in intel_pmu_pebs_disable()
  perf/x86: Fix shared register mutual exclusion enforcement
  perf/x86/intel: Support full width counting
  x86: Add NMI duration tracepoints
  perf: Drop sample rate when sampling is too slow
  x86: Warn when NMI handlers take large amounts of time
  hw_breakpoint: Introduce "struct bp_cpuinfo"
  hw_breakpoint: Simplify *register_wide_hw_breakpoint()
  hw_breakpoint: Introduce cpumask_of_bp()
  hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() paths
  hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() paths
  perf/x86/intel: Add mem-loads/stores support for Haswell
  perf/x86/intel: Support Haswell/v4 LBR format
  perf/x86/intel: Move NMI clearing to end of PMI handler
  perf/x86/intel: Add Haswell PEBS support
  perf/x86/intel: Add simple Haswell PMU support
  perf/x86/intel: Add Haswell PEBS record support
  perf/x86/intel: Fix sparse warning
  perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation
  perf/x86/amd: Add IOMMU Performance Counter resource management
  ...

Pull core irq changes from Ingo Molnar:
 "The main changes:

  - generic-irqchip driver additions, cleanups and fixes

  - 3 new irqchip drivers: ARMv7-M NVIC, TB10x and Marvell Orion SoCs

  - irq_get_trigger_type() simplification and cross-arch cleanup

  - various cleanups, simplifications

  - documentation updates"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  softirq: Use _RET_IP_
  genirq: Add the generic chip to the genirq docbook
  genirq: generic-chip: Export some irq_gc_ functions
  genirq: Fix can_request_irq() for IRQs without an action
  irqchip: exynos-combiner: Staticize combiner_init
  irqchip: Add support for ARMv7-M NVIC
  irqchip: Add TB10x interrupt controller driver
  irqdomain: Use irq_get_trigger_type() to get IRQ flags
  MIPS: octeon: Use irq_get_trigger_type() to get IRQ flags
  arm: orion: Use irq_get_trigger_type() to get IRQ flags
  mfd: stmpe: use irq_get_trigger_type() to get IRQ flags
  mfd: twl4030-irq: Use irq_get_trigger_type() to get IRQ flags
  gpio: mvebu: Use irq_get_trigger_type() to get IRQ flags
  genirq: Add irq_get_trigger_type() to get IRQ flags
  genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chips
  genirq: Set irq thread to RT priority on creation
  irqchip: Add support for Marvell Orion SoCs
  genirq: Add kerneldoc for irq_disable.
  genirq: irqchip: Add mask to block out invalid irqs
  genirq: Generic chip: Add linear irq domain support
  ...

Pull RCU updates from Ingo Molnar:
 "The major changes:

  - Simplify RCU's grace-period and callback processing based on the new
    numbering for callbacks.

  - Removal of TINY_PREEMPT_RCU in favor of TREE_PREEMPT_RCU for
    single-CPU low-latency systems.

  - SRCU-related changes and fixes.

  - Miscellaneous fixes, including converting a few remaining printk()
    calls to pr_*().

  - Documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  rcu: Shrink TINY_RCU by reworking CPU-stall ifdefs
  rcu: Shrink TINY_RCU by moving exit_rcu()
  rcu: Remove TINY_PREEMPT_RCU tracing documentation
  rcu: Consolidate rcutiny_plugin.h ifdefs
  rcu: Remove rcu_preempt_note_context_switch()
  rcu: Remove the CONFIG_TINY_RCU ifdefs in rcutiny.h
  rcu: Remove check_cpu_stall_preempt()
  rcu: Simplify RCU_TINY RCU callback invocation
  rcu: Remove rcu_preempt_process_callbacks()
  rcu: Remove rcu_preempt_remove_callbacks()
  rcu: Remove rcu_preempt_check_callbacks()
  rcu: Remove show_tiny_preempt_stats()
  rcu: Remove TINY_PREEMPT_RCU
  powerpc,kvm: fix imbalance srcu_read_[un]lock()
  rcu: Remove srcu_read_lock_raw() and srcu_read_unlock_raw().
  rcu: Apply Dave Jones's NOCB Kconfig help feedback
  rcu: Merge adjacent identical ifdefs
  rcu: Drive quiescent-state-forcing delay from HZ
  rcu: Remove "Experimental" flags
  kthread: Add kworker kthreads to OS-jitter documentation
  ...

Pull WW mutex support from Ingo Molnar:
 "This tree adds support for wound/wait style locks, which the graphics
  guys would like to make use of in the TTM graphics subsystem.

  Wound/wait mutexes are used when other multiple lock acquisitions of a
  similar type can be done in an arbitrary order.  The deadlock handling
  used here is called wait/wound in the RDBMS literature: The older
  tasks waits until it can acquire the contended lock.  The younger
  tasks needs to back off and drop all the locks it is currently
  holding, ie the younger task is wounded.

  See this LWN.net description of W/W mutexes:

     https://lwn.net/Articles/548909/

  The comments there outline specific usecases for this facility (which
  have already been implemented for the DRM tree).

  Also see Documentation/ww-mutex-design.txt for more details"

* 'core-mutexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking-selftests: Handle unexpected failures more strictly
  mutex: Add more w/w tests to test EDEADLK path handling
  mutex: Add more tests to lib/locking-selftest.c
  mutex: Add w/w tests to lib/locking-selftest.c
  mutex: Add w/w mutex slowpath debugging
  mutex: Add support for wound/wait style locks
  arch: Make __mutex_fastpath_lock_retval return whether fastpath succeeded or not

Pull locking changes from Ingo Molnar:
 "Four miscellanous standalone fixes for futexes, rtmutexes and
  Kconfig.locks."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Use freezable blocking call
  futex: Take hugepages into account when generating futex_key
  rtmutex: Document rt_mutex_adjust_prio_chain()
  locking: Fix copy/paste errors of "ARCH_INLINE_*_UNLOCK_BH"

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These are 18 branches on 9 platforms with board specific changes,
  mostly for defconfig files, but nothing really exciting in here.

  Since the shmobile platform still uses board files for some of the
  newer machines, we get a few changes there as the result of drivers
  getting enabled for those boards.  This causes some conflicts with
  contents getting added from multiple branches in sh-mobile specific
  files.  Renesas is putting a lot of work into migrating to device-tree
  based setup, which will make all those files obsolete in the future
  and avoid both the conflicts and the need to have these files in the
  first place."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  arm: multi_v7_defconfig: Enable initrd/initramfs support
  arm: multi_v7_defconfig: Enable Zynq UART driver
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x
  ARM: shmobile: BOCK-W: change Ether device name
  ARM: ux500: board-mop500: remove unused pin modes
  ARM: shmobile: bockw: add MMCIF support
  ARM: shmobile: bockw: add SPI FLASH support
  ARM: shmobile: bockw: add I2C device support
  ARM: shmobile: BOCK-W: add Ether support
  ARM: tegra: defconfig updates
  ARM: shmobile: bockw defconfig: add MMCIF support
  ARM: shmobile: bockw defconfig: add M25P80 support
  ARM: shmobile: bockw defconfig: add RTC RX8581 support
  ARM: shmobile: marzen: keep local function as static
  ARM: shmobile: bockw: add SDHI0 support
  ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
  ARM: shmobile: lager: support GPIO switches
  ...

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
 "These are various bug fixes that were not considered important enough
  for merging into 3.10.

  The majority of the ARM fixes are for the OMAP and at91 platforms, and
  there is another set of bug fixes for device drivers that resolve
  'randconfig' build errors and that the subsystem maintainers either
  did not pick up or preferred to get merged through the arm-soc tree."

* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
  ARM: at91/PMC: fix at91sam9n12 USB FS init
  ARM: at91/PMC: at91sam9n12 family has a PLLB
  ARM: at91/PMC: sama5d3 family doesn't have a PLLB
  ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
  ARM: mxs: don't select HAVE_PWM
  ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
  cpuidle: calxeda: select ARM_CPU_SUSPEND
  ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
  ARM: at91: cpuidle: Fix target_residency
  ARM: at91: fix at91_extern_irq usage for non-dt boards
  ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
  clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
  X.509: do not emit any informational output
  mtd: omap2: allow bulding as a module
  [SCSI] nsp32: use mdelay instead of large udelay constants
  hwrng: bcm2835: fix MODULE_LICENSE tag
  ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
  ARM: at91: Fix link breakage when !CONFIG_PHYLIB
  MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
  ...

Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the big driver core merge for 3.11-rc1

  Lots of little things, and larger firmware subsystem updates, all
  described in the shortlog.  Nice thing here is that we finally get rid
  of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
  been always on for a number of kernel releases, now it's just
  removed)"

* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
  driver core: device.h: fix doc compilation warnings
  firmware loader: fix another compile warning with PM_SLEEP unset
  build some drivers only when compile-testing
  firmware loader: fix compile warning with PM_SLEEP set
  kobject: sanitize argument for format string
  sysfs_notify is only possible on file attributes
  firmware loader: simplify holding module for request_firmware
  firmware loader: don't export cache_firmware and uncache_firmware
  drivers/base: Use attribute groups to create sysfs memory files
  firmware loader: fix compile warning
  firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
  Documentation: Updated broken link in HOWTO
  Finally eradicate CONFIG_HOTPLUG
  driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
  driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
  Documentation: Tidy up some drivers/base/core.c kerneldoc content.
  platform_device: use a macro instead of platform_driver_register
  firmware: move EXPORT_SYMBOL annotations
  firmware: Avoid deadlock of usermodehelper lock at shutdown
  dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
  ...

Pull char/misc updates from Greg KH:
 "Here's the big char/misc driver tree merge for 3.11-rc1

  A variety of different driver patches here.  All of these have been in
  linux-next for a while, and the networking patches were acked-by David
  Miller, as it made sense for those patches to come through this tree"

* tag 'char-misc-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (102 commits)
  Revert "char: misc: assign file->private_data in all cases"
  drivers: uio_pdrv_genirq: Use of_match_ptr() macro
  mei: check whether hw start has succeeded
  mei: check if the hardware reset succeeded
  mei: mei_cl_connect: don't multiply the timeout twice
  mei: do not override a client writing state when buffering
  mei: move mei_cl_irq_write_complete to client.c
  UIO: Fix concurrency issue
  drivers: uio_dmem_genirq: Use of_match_ptr() macro
  char: misc: assign file->private_data in all cases
  drivers: hv: allocate synic structures before hv_synic_init()
  drivers: hv: check interrupt mask before read_index
  vme: vme_tsi148.c: fix error return code in tsi148_probe()
  FMC: fix error handling in probe() function
  fmc: avoid readl/writel namespace conflict
  FMC: NULL dereference on allocation failure
  UIO: fix uio_pdrv_genirq with device tree but no interrupt
  UIO: allow binding uio_pdrv_genirq.c to devices using command line option
  FMC: add a char-device mezzanine driver
  FMC: add a driver to write mezzanine EEPROM
  ...

Pull staging tree update from Greg KH:
 "Here's the large staging tree merge for 3.11-rc1

  Huge thing here is the Lustre client code.  Unfortunatly, due to it
  not building properly on a wide variety of different architectures
  (this was production code???), it is currently disabled from the build
  so as to not annoy people.

  Other than Lustre, there are loads of comedi patches, working to clean
  up that subsystem, iio updates and new drivers, and a load of cleanups
  from the OPW applicants in their quest to get a summer internship.

  All of these have been in the linux-next releases for a while (hence
  the Lustre code being disabled)"

Fixed up trivial conflict in drivers/staging/serqt_usb2/serqt_usb2.c due
to independent renamings in the staging driver cleanup and the USB
tree..

* tag 'staging-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (868 commits)
  Revert "Revert "Revert "staging/lustre: drop CONFIG_BROKEN dependency"""
  staging: rtl8192u: fix line length in r819xU_phy.h
  staging: rtl8192u: rename variables in r819xU_phy.h
  staging: rtl8192u: fix comments in r819xU_phy.h
  staging: rtl8192u: fix whitespace in r819xU_phy.h
  staging: rtl8192u: fix newlines in r819xU_phy.c
  staging: comedi: unioxx5: use comedi_alloc_spriv()
  staging: comedi: unioxx5: fix unioxx5_detach()
  silicom: checkpatch: errors caused by macros
  Staging: silicom: remove the board_t typedef in bpctl_mod.c
  Staging: silicom: capitalize labels in the bp_media_type enum
  Staging: silicom: remove bp_media_type enum typedef
  staging: rtl8192u: replace msleep(1) with usleep_range() in r819xU_phy.c
  staging: rtl8192u: rename dwRegRead and rtStatus in r819xU_phy.c
  staging: rtl8192u: replace __FUNCTION__ in r819xU_phy.c
  staging: rtl8192u: limit line size in r819xU_phy.c
  zram: allow request end to coincide with disksize
  staging: drm/imx: use generic irq chip unused field to block out invalid irqs
  staging: drm/imx: use generic irqchip
  staging: drm/imx: ipu-dmfc: use defines for ipu channel numbers
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big TTY / Serial driver merge for 3.11-rc1.

  It's not all that big, nothing major changed in the tty api, which is
  a nice change, just a number of serial driver fixes and updates and
  new drivers, along with some n_tty fixes to help resolve some reported
  issues.

  All of these have been in the linux-next releases for a while, with
  the exception of the last revert patch, which was reported this past
  weekend by two different people as being needed."

* tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (51 commits)
  Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"
  pch_uart: Add uart_clk selection for the MinnowBoard
  tty: atmel_serial: prepare clk before calling enable
  tty: Reset itty for other pty
  n_tty: Buffer work should not reschedule itself
  n_tty: Fix unsafe update of available buffer space
  n_tty: Untangle read completion variables
  n_tty: Encapsulate minimum_to_wake within N_TTY
  serial: omap: Fix device tree based PM runtime
  serial: imx: Fix serial clock unbalance
  serial/mpc52xx_uart: fix kernel panic when system reboot
  serial: mfd: Add sysrq support
  serial: imx: enable the clocks for console
  tty: serial: add Freescale lpuart driver support
  serial: imx: Improve Kconfig text
  serial: imx: Allow module build
  serial: imx: Fix warning when !CONFIG_SERIAL_IMX_CONSOLE
  tty/serial/sirf: fix error propagation in sirfsoc_uart_probe()
  serial: omap: fix potential NULL pointer dereference in serial_omap_runtime_suspend()
  tty: serial: Enable uartlite for ARM zynq
  ...

Pull USB updates from Greg KH:
 "Here's the big USB 3.11-rc1 merge request.

  Lots of gadget and finally, chipidea driver updates (they were much
  needed), along with a new host controller driver, lots of little
  serial driver fixes, the removal of the 255 usb-serial device
  limitation, and a variety of other minor things.

  All of these have been in the linux-next releases for a while"

* tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (254 commits)
  usb: musb: omap2430: make it compile again
  usb: chipidea: ci_hdrc_imx: access phy via private data
  xhci: Add missing unlocks on error paths
  USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
  ehci-atmel.c: prepare clk before calling enable
  USB: ohci-at91: prepare clk before calling enable
  USB: HWA: fix device probe failure
  wusbcore: add entries in Documentation/ABI for new wusbhc sysfs attributes
  wusbcore: add sysfs attribute for retry count
  wusbcore: add sysfs attribute for DNTS count and interval
  usb: chipidea: drop "13xxx" infix
  usb: phy: tegra: remove duplicated include from phy-tegra-usb.c
  usb: host: xhci-plat: release mem region while removing module
  usbmisc_imx: allow autoloading on according to dt ids
  usb: fix build error without CONFIG_USB_PHY
  usb: check usb_hub_to_struct_hub() return value
  xhci: check for failed dma pool allocation
  usb: gadget: f_subset: fix missing unlock on error in geth_alloc()
  usb: gadget: f_ncm: fix missing unlock on error in ncm_alloc()
  usb: gadget: f_ecm: fix missing unlock on error in ecm_alloc()
  ...

Pull FS-Cache updates from David Howells:
 "This contains a number of fixes for various FS-Cache issues plus some
  cleanups.  The commits are, in order:

   1) Provide a system wait_on_atomic_t() and wake_up_atomic_t() sharing
      the bit-wait table (enhancement for #8).

   2) Don't put spin_lock() in a while-condition as spin_lock() may have
      a do {} while(0) wrapper (cleanup).

   3) Symbolically name i_mutex lock classes rather than using numbers
      in CacheFiles (cleanup).

   4) Don't sleep in page release if __GFP_FS is not set (deadlock vs
      ext4).

   5) Uninline fscache_object_init() (cleanup for #7).

   6) Wrap checks on object state (cleanup for #7).

   7) Simplify the object state machine by separating work states from
      wait states.

   8) Simplify cookie retention by objects (NULL pointer deref fix).

   9) Remove unused list_to_page() macro (cleanup).

  10) Make the remaining-pages counter in the retrieval op atomic
      (assertion failure fix).

  11) Don't use spin_is_locked() in assertions (assertion failure fix)"

* tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  FS-Cache: Don't use spin_is_locked() in assertions
  FS-Cache: The retrieval remaining-pages counter needs to be atomic_t
  cachefiles: remove unused macro list_to_page()
  FS-Cache: Simplify cookie retention for fscache_objects, fixing oops
  FS-Cache: Fix object state machine to have separate work and wait states
  FS-Cache: Wrap checks on object state
  FS-Cache: Uninline fscache_object_init()
  FS-Cache: Don't sleep in page release if __GFP_FS is not set
  CacheFiles: name i_mutex lock class explicitly
  fs/fscache: remove spin_lock() from the condition in while()
  Add wait_on_atomic_t() and wake_up_atomic_t()

Pull dlm updates from David Teigland:
 "This set includes a number of SCTP related fixes in the dlm, and a few
  other minor fixes and changes."

* tag 'dlm-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: Avoid LVB truncation
  dlm: log an error for unmanaged lockspaces
  dlm: config: using strlcpy instead of strncpy
  dlm: remove duplicated include from lowcomms.c
  dlm: disable nagle for SCTP
  dlm: retry failed SCTP sends
  dlm: try other IPs when sctp init assoc fails
  dlm: clear correct bit during sctp init failure handling
  dlm: set sctp assoc id during setup
  dlm: clear correct init bit during sctp setup

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches:
   - remount_fs callback function
   - restore parent inode number to enhance the fsync performance
   - xattr security labels
   - reduce the number of redundant lock/unlock data pages
   - avoid frequent write_inode calls

  The other minor bug fixes are as follows.
   - endian conversion bugs
   - various bugs in the roll-forward recovery routine"

* tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (56 commits)
  f2fs: fix to recover i_size from roll-forward
  f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes()
  f2fs: remove reusing any prefree segments
  f2fs: code cleanup and simplify in func {find/add}_gc_inode
  f2fs: optimize the init_dirty_segmap function
  f2fs: fix an endian conversion bug detected by sparse
  f2fs: fix crc endian conversion
  f2fs: add remount_fs callback support
  f2fs: recover wrong pino after checkpoint during fsync
  f2fs: optimize do_write_data_page()
  f2fs: make locate_dirty_segment() as static
  f2fs: remove unnecessary parameter "offset" from __add_sum_entry()
  f2fs: avoid freqeunt write_inode calls
  f2fs: optimise the truncate_data_blocks_range() range
  f2fs: use the F2FS specific flags in f2fs_ioctl()
  f2fs: sync dir->i_size with its block allocation
  f2fs: fix i_blocks translation on various types of files
  f2fs: set sb->s_fs_info before calling parse_options()
  f2fs: support xattr security labels
  f2fs: fix iget/iput of dir during recovery
  ...

Pull GFS2 updates from Steven Whitehouse:
 "There are a few bug fixes for various, mostly very minor corner cases,
  plus some interesting new features.

  The new features include atomic_open whose main benefit will be the
  reduction in locking overhead in case of combined lookup/create and
  open operations, sorting the log buffer lists by block number to
  improve the efficiency of AIL writeback, and aggressively issuing
  revokes in gfs2_log_flush to reduce overhead when dropping glocks."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Reserve journal space for quota change in do_grow
  GFS2: Fix fstrim boundary conditions
  GFS2: fix warning message
  GFS2: aggressively issue revokes in gfs2_log_flush
  GFS2: fix regression in dir_double_exhash
  GFS2: Add atomic_open support
  GFS2: Only do one directory search on create
  GFS2: fix error propagation in init_threads()
  GFS2: Remove no-op wrapper function
  GFS2: Cocci spatch "ptr_ret.spatch"
  GFS2: Eliminate gfs2_rg_lops
  GFS2: Sort buffer lists by inplace block number