Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are 3 tiny fixes for 3.18-rc4.

  One fixes up a long-stading race condition in the driver core for
  removing directories in /sys/devices/virtual/ and the other 2 fix up
  the wording of a new Kconfig option that was added in 3.18-rc1"

* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
  tiny: reverse logic for DISABLE_DEV_COREDUMP
  sysfs: driver core: Fix glue dir race condition by gdp_mutex

Pull staging driver fixes from Greg KH:
 "Here are some staging/iio fixes for 3.18-rc4.

  Nothing major, just a few bugfixes of things that have been reported"

* tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging:iio:ade7758: Remove "raw" from channel name
  staging:iio:ade7758: Fix check if channels are enabled in prenable
  staging:iio:ade7758: Fix NULL pointer deref when enabling buffer
  iio: as3935: allocate correct iio_device size
  io: accel: kxcjk-1013: Fix iio_event_spec direction
  iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined
  iio: adc: mxs-lradc: Disable the clock on probe failure
  iio: st_sensors: Fix buffer copy
  staging:iio:ad5933: Drop "raw" from channel names
  staging:iio:ad5933: Fix NULL pointer deref when enabling buffer

Pull tty/serial fixes from Greg KH:
 "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some
  reported issues"

* tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix pty master poll() after slave closes v2
  serial: of-serial: fix uninitialized kmalloc variable
  tty/vt: don't set font mappings on vc not supporting this
  tty: serial: 8250_mtk: Fix quot calculation
  tty: Prevent "read/write wait queue active!" log flooding
  tty: Fix high cpu load if tty is unreleaseable
  serial: Fix divide-by-zero fault in uart_get_divisor()

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 3.18-rc4.

  Just a bunch of little fixes resolving reported issues and new device
  ids for existing drivers.  Full details are in the shortlog"

* tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: Update default usb-storage delay_use value in kernel-parameters.txt
  USB: cdc-acm: add quirk for control-line state requests
  phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly
  USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init()
  USB: cdc-acm: only raise DTR on transitions from B0
  Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"
  usb: core: notify disconnection when core detects disconnect
  usb: core: need to call usb_phy_notify_connect after device setup
  uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models
  xhci: no switching back on non-ULT Haswell
  USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen
  USB: quirks: enable device-qualifier quirk for another Elan touchscreen
  MAINTAINERS: Remove duplicate entry for usbip driver
  usb: storage: fix build warnings !CONFIG_PM
  usb: Remove references to non-existent PLAT_S5P symbol
  uas: Add NO_ATA_1X for VIA VL711 devices
  xhci: Disable streams on Asmedia 1042 xhci controllers
  USB: HWA: fix a warning message
  uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model
  usb-storage: handle a skipped data phase
  ...

Pull i2c bugfixes from Wolfram Sang:
 "One bigger cleanup (FSF address removal) and two bugfixes for I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Dispose OF IRQ mapping at client removal time
  i2c: at91: don't account as iowait
  i2c: remove FSF address

Pull irq fixes from Thomas Gleixner:
 "Two fixlets for the armada SoC interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: armada-370-xp: Fix MPIC interrupt handling
  irqchip: armada-370-xp: Fix MSI interrupt handling

Pull media fixes from Mauro Carvalho Chehab:
 "For:
   - some regression fixes at the Remote Controller core and imon driver
   - a build fix for certain randconfigs with ir-hix5hd2
   - don't feed power to satellite system at ds3000 driver init

  It also contains some fixes for drivers added for Kernel 3.18:
   - some fixes at the new ISDB-S driver, and the corresponding bits to
     fix some descriptors for this Japanese TV standard at the DVB core
   - two warning cleanups for sp2 driver if PM is disabled
   - change the default mode for the new vivid driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] sp2: sp2_init() can be static
  [media] dvb:tc90522: fix always-false expression
  [media] dvb-core: set default properties of ISDB-S
  [media] dvb:tc90522: fix stats report
  [media] vivid: default to single planar device instances
  [media] imon: fix other RC type protocol support
  [media] ir-hix5hd2 fix build warning
  [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization
  [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding
  [media] rc-core: fix protocol_change regression in ir_raw_event_register

Pull MIPS updates from Ralf Baechle:
 "This weeks' round of MIPS bug fixes for 3.18:

   - wire up the bpf syscall
   - fix TLB dump output for R3000 class TLBs
   - fix strnlen_user return value if no NUL character was found.
   - fix build with binutils 2.24.51+.  While there is no binutils 2.25
     release yet, toolchains derived from binutils 2.24.51+ are already
     in common use.
   - the Octeon GPIO code forgot to offline GPIO IRQs.
   - fix build error for XLP.
   - fix possible BUG assertion with EVA for CMA"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix build with binutils 2.24.51+
  MIPS: R3000: Fix debug output for Virtual page number
  MIPS: Fix strnlen_user() return value in case of overlong strings.
  MIPS: CMA: Do not reserve memory if not required
  MIPS: Wire up bpf syscall.
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware

Pull xfs fixes from Dave Chinner:
 "This update fixes a warning in the new pagecache_isize_extended() and
  updates some related comments, another fix for zero-range
  misbehaviour, and an unforntuately large set of fixes for regressions
  in the bulkstat code.

  The bulkstat fixes are large but necessary.  I wouldn't normally push
  such a rework for a -rcX update, but right now xfsdump can silently
  create incomplete dumps on 3.17 and it's possible that even xfsrestore
  won't notice that the dumps were incomplete.  Hence we need to get
  this update into 3.17-stable kernels ASAP.

  In more detail, the refactoring work I committed in 3.17 has exposed a
  major hole in our QA coverage.  With both xfsdump (the major user of
  bulkstat) and xfsrestore silently ignoring missing files in the
  dump/restore process, incomplete dumps were going unnoticed if they
  were being triggered.  Many of the dump/restore filesets were so small
  that they didn't evenhave a chance of triggering the loop iteration
  bugs we introduced in 3.17, so we didn't exercise the code
  sufficiently, either.

  We have already taken steps to improve QA coverage in xfstests to
  avoid this happening again, and I've done a lot of manual verification
  of dump/restore on very large data sets (tens of millions of inodes)
  of the past week to verify this patch set results in bulkstat behaving
  the same way as it does on 3.16.

  Unfortunately, the fixes are not exactly simple - in tracking down the
  problem historic API warts were discovered (e.g xfsdump has been
  working around a 20 year old bug in the bulkstat API for the past 10
  years) and so that complicated the process of diagnosing and fixing
  the problems.  i.e. we had to fix bugs in the code as well as
  discover and re-introduce the userspace visible API bugs that we
  unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly.

  Summary:

   - incorrect warnings about i_mutex locking in pagecache_isize_extended()
     and updates comments to match expected locking
   - another zero-range bug fix for stray file size updates
   - a bunch of fixes for regression in the bulkstat code introduced in
     3.17"

* tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: track bulkstat progress by agino
  xfs: bulkstat error handling is broken
  xfs: bulkstat main loop logic is a mess
  xfs: bulkstat chunk-formatter has issues
  xfs: bulkstat chunk formatting cursor is broken
  xfs: bulkstat btree walk doesn't terminate
  mm: Fix comment before truncate_setsize()
  xfs: rework zero range to prevent invalid i_size updates
  mm: Remove false WARN_ON from pagecache_isize_extended()
  xfs: Check error during inode btree iteration in xfs_bulkstat()
  xfs: bulkstat doesn't release AGI buffer on error

Pull regulator fixes from Mark Brown:
 "More changes than I'd like here, most of them for a single bug
  repeated in a bunch of drivers with data not being initialized
  correctly, plus a fix to lower the severity of a warning introduced in
  the last merge window which can legitimately go off so we don't want
  to alarm users excessively"

* tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: s2mpa01: zero-initialize regulator match table array
  regulator: max8660: zero-initialize regulator match table array
  regulator: max77802: zero-initialize regulator match table
  regulator: max77686: zero-initialize regulator match table
  regulator: max1586: zero-initialize regulator match table array
  regulator: max77693: Fix use of uninitialized regulator config
  regulator: of: Lower the severity of the error with no container

Pull spi bugfixes from Mark Brown:
 "A couple of small driver fixes for v3.18, both quite problematic if
  you hit a use case that's affected"

* tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM
  spi: fsl-dspi: Fix CTAR selection

The ENABLE_DEV_COREDUMP option is misleading as it implies that
it gets the framework enabled, this isn't true it just allows it
to get enabled if a driver needs it.

Rename it to ALLOW_DEV_COREDUMP to better capture its semantics.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's desirable for allnconfig and tinyconfig targets to result in the
least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to
switch off DEV_COREDUMP regardless if any drivers select
WANT_DEV_COREDUMP.

This patch renames the option to ENABLE_DEV_COREDUMP and setting it to
'n' (as in allnconfig or tinyconfig) will effectively disable device
coredump.

Cc: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clients instantiated from OF get an IRQ mapping created at device
registration time. Dispose the mapping when the client is removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

iowait is for blkio [1]. I2C shouldn't use it.

[1] https://lkml.org/lkml/2014/11/3/317Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable@kernel.org

We have a central copy of the GPL for that. Some addresses were already
outdated.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Back in 2010 the default usb-storage delay_use time was reduced from 5 to 1
second (commit a4a47bc0), but
kernel-parameters.txt wasn't updated to reflect that.
Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a race condition when removing glue directory.
It can be reproduced in following test:

path 1: Add first child device
device_add()
    get_device_parent()
            /*find parent from glue_dirs.list*/
            list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry)
                    if (k->parent == parent_kobj) {
                            kobj = kobject_get(k);
                            break;
                    }
            ....
            class_dir_create_and_add()

path2: Remove last child device under glue dir
device_del()
    cleanup_device_parent()
            cleanup_glue_dir()
                    kobject_put(glue_dir);

If path2 has been called cleanup_glue_dir(), but not
call kobject_put(glue_dir), the glue dir is still
in parent's kset list. Meanwhile, path1 find the glue
dir from the glue_dirs.list. Path2 may release glue dir
before path1 call kobject_get(). So kernel will report
the warning and bug_on.

This is a "classic" problem we have of a kref in a list
that can be found while the last instance could be removed
at the same time.

This patch reuse gdp_mutex to fix this race condition.

The following calltrace is captured in kernel 3.4, but
the latest kernel still has this bug.

-----------------------------------------------------
<4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40()
<4>[ 3965.441474] Hardware name: Romley
<4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)...
...
<4>[ 3965.441605] Call Trace:
<4>[ 3965.441611]  [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0
<4>[ 3965.441615]  [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20
<4>[ 3965.441618]  [<ffffffff81215963>] kobject_get+0x33/0x40
<4>[ 3965.441624]  [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0
<4>[ 3965.441627]  [<ffffffff812d22d4>] device_add+0xd4/0x6d0
<4>[ 3965.441631]  [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40
....
<2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65!
<4>[ 3965.441915] invalid opcode: 0000 [#1] SMP
...
<4>[ 3965.686743]  [<ffffffff811a677e>] sysfs_create_group+0xe/0x10
<4>[ 3965.686748]  [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20
<4>[ 3965.686753]  [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120
<4>[ 3965.686756]  [<ffffffff812030bc>] add_disk+0x1cc/0x490
....
-------------------------------------------------------
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Cc: <stable@vger.kernel.org> #3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Starting with version 2.24.51.20140728 MIPS binutils complain loudly
about mixing soft-float and hard-float object files, leading to this
build failure since GCC is invoked with "-msoft-float" on MIPS:

{standard input}: Warning: .gnu_attribute 4,3 requires `softfloat'
  LD      arch/mips/alchemy/common/built-in.o
mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o
 uses -msoft-float (set by arch/mips/alchemy/common/prom.o),
 arch/mips/alchemy/common/sleeper.o uses -mhard-float

To fix this, we detect if GAS is new enough to support "-msoft-float" command
option, and if it does, we can let GCC pass it to GAS;  but then we also need
to sprinkle the files which make use of floating point registers with the
necessary ".set hardfloat" directives.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The bulkstat main loop progress is tracked by the "lastino"
variable, which is a full 64 bit inode. However, the loop actually
works on agno/agino pairs, and so there's a significant disconnect
between the rest of the loop and the main cursor. Convert this to
use the agino, and pass the agino into the chunk formatting function
and convert it too.

This gets rid of the inconsistency in the loop processing, and
finally makes it simple for us to skip inodes at any point in the
loop simply by incrementing the agino cursor.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

The error propagation is a horror - xfs_bulkstat() returns
a rval variable which is only set if there are formatter errors. Any
sort of btree walk error or corruption will cause the bulkstat walk
to terminate but will not pass an error back to userspace. Worse
is the fact that formatter errors will also be ignored if any inodes
were correctly formatted into the user buffer.

Hence bulkstat can fail badly yet still report success to userspace.
This causes significant issues with xfsdump not dumping everything
in the filesystem yet reporting success. It's not until a restore
fails that there is any indication that the dump was bad and tha
bulkstat failed. This patch now triggers xfsdump to fail with
bulkstat errors rather than silently missing files in the dump.

This now causes bulkstat to fail when the lastino cookie does not
fall inside an existing inode chunk. The pre-3.17 code tolerated
that error by allowing the code to move to the next inode chunk
as the agino target is guaranteed to fall into the next btree
record.

With the fixes up to this point in the series, xfsdump now passes on
the troublesome filesystem image that exposes all these bugs.

cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>

There are a bunch of variables tha tare more wildy scoped than they
need to be, obfuscated user buffer checks and tortured "next inode"
tracking. This all needs cleaning up to expose the real issues that
need fixing.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

The loop construct has issues:
	- clustidx is completely unused, so remove it.
	- the loop tries to be smart by terminating when the
	  "freecount" tells it that all inodes are free. Just drop
	  it as in most cases we have to scan all inodes in the
	  chunk anyway.
	- move the "user buffer left" condition check to the only
	  point where we consume space int eh user buffer.
	- move the initialisation of agino out of the loop, leaving
	  just a simple loop control logic using the clusteridx.

Also, double handling of the user buffer variables leads to problems
tracking the current state - use the cursor variables directly
rather than keeping local copies and then having to update the
cursor before returning.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

The xfs_bulkstat_agichunk formatting cursor takes buffer values from
the main loop and passes them via the structure to the chunk
formatter, and the writes the changed values back into the main loop
local variables. Unfortunately, this complex dance is full of corner
cases that aren't handled correctly.

The biggest problem is that it is double handling the information in
both the main loop and the chunk formatting function, leading to
inconsistent updates and endless loops where progress is not made.

To fix this, push the struct xfs_bulkstat_agichunk outwards to be
the primary holder of user buffer information. this removes the
double handling in the main loop.

Also, pass the last inode processed by the chunk formatter as a
separate parameter as it purely an output variable and is not
related to the user buffer consumption cursor.

Finally, the chunk formatting code is not shared by anyone, so make
it local to xfs_itable.c.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

The bulkstat code has several different ways of detecting the end of
an AG when doing a walk. They are not consistently detected, and the
code that checks for the end of AG conditions is not consistently
coded. Hence the are conditions where the walk code can get stuck in
an endless loop making no progress and not triggering any
termination conditions.

Convert all the "tmp/i" status return codes from btree operations
to a common name (stat) and apply end-of-ag detection to these
operations consistently.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

XFS doesn't always hold i_mutex when calling truncate_setsize() and it
uses a different lock to serialize truncates and writes. So fix the
comment before truncate_setsize().
Reported-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>

Add new quirk for devices that cannot handle control-line state
requests.

Note that we currently send these requests to all devices, regardless of
whether they claim to support it, but that errors are only logged if
support is claimed.

Since commit 0943d8ea ("USB: cdc-acm: use tty-port dtr_rts"), which
only changed the timings for these requests slightly, this has been
reported to cause occasional firmware crashes on Simtec Electronics
Entropy Key devices after re-enumeration. Enable the quirk for this
device.
Reported-by: Nix <nix@esperi.org.uk>
Tested-by: Nix <nix@esperi.org.uk>
Cc: stable <stable@vger.kernel.org>	# v3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'fixes-for-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v3.18-rc4

A single fix this for dwc2 this time. Because of
excessive debugging messages, dwc2 would sometimes
fail enumeration. The fix is simple, just converting
a dev_info() into dev_dbg().
Signed-off-by: Felipe Balbi <balbi@ti.com>

Commit f95499c3 ("n_tty: Don't wait for buffer work in read() loop")
introduces a race window where a pty master can be signalled that the pty
slave was closed before all the data that the slave wrote is delivered.
Commit f8747d4a ("tty: Fix pty master read() after slave closes") fixed the
problem in case of n_tty_read, but the problem still exists for n_tty_poll.
This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done'
where test.py is:

import os, select, pty

(pid, pty_fd) = pty.fork()

if pid == 0:
   os.write(1, 'This string should be received by parent')
else:
   poller = select.epoll()
   poller.register( pty_fd, select.EPOLLIN )
   ready = poller.poll( 1 * 1000 )
   for fd, events in ready:
      if not events & select.EPOLLIN:
         print 'missed POLLIN event'
      else:
         print os.read(fd, 100)
   poller.close()

The string from the slave is missed several times.
This patch takes the same approach as the fix for read and special cases
this condition for poll.
Tested on 3.16.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'usb-serial-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v3.18-rc4

Two fixes of non-atomic allocations in write paths.
Signed-off-by: Johan Hovold <johan@kernel.org>

Pull PCI fix from Bjorn Helgaas:
 "This fixes an oops when enabling SR-IOV VF devices.  The oops is a
  regression I added by configuring all devices during enumeration.

    - Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)"

* tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()

Pull sound fixes from Takashi Iwai:
 "This update contains mostly only fixes for Realtek HD-audio codec
  driver in addition to a long-standing sysfs warning bug fix for
  USB-audio.

  One significant fix for Realtek codecs is the update of EAPD init
  codes.  This avoids invalid COEF setups for some codec models and may
  fix "lost sound" in some cases.

  The rest are a bit high volume but only new quirks and ALC668-specific
  COEF tables"

* tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Restore default value for ALC668
  ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect
  ALSA: hda - fix mute led problem for three HP laptops
  ALSA: hda/realtek - Update Initial AMP for EAPD control
  ALSA: hda - change three SSID quirks to one pin quirk
  ALSA: hda - Set GPIO 4 low for a few HP machines
  ALSA: hda - Add ultra dock support for Thinkpad X240.

Pull MMC fix from Ulf Hansson:
 "Fix card detection regression in the MMC core.

  The MMC_CAP2_CD_ACTIVE_HIGH and MMC_CAP2_RO_ACTIVE_HIGH could under
  some circumstances be set incorrectly, causing the card detection to
  fail"

* tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: core: fix card detection regression

Pull another filesystem fix from Al Viro:
 "A fix for embarrassing braino in o2net_send_tcp_msg().  -stable
  fodder..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix breakage in o2net_send_tcp_msg()

Virtual page number of R3000 in entryhi is 20 bit from MSB. But in
dump_tlb(), the bit mask to read it from entryhi is 19 bit (0xffffe000).
The patch fixes that to 0xfffff000.
Signed-off-by: Isamu Mogi <isamu@leafytree.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8290/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

If PM_RUNTIME is enabled, it is easy to trigger the following backtrace
on pxa2xx hosts:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /home/lumag/linux/arch/arm/mach-pxa/clock.c:35 clk_disable+0xa0/0xa8()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00007-g1b3d2ee-dirty #104
[<c000de68>] (unwind_backtrace) from [<c000c078>] (show_stack+0x10/0x14)
[<c000c078>] (show_stack) from [<c001d75c>] (warn_slowpath_common+0x6c/0x8c)
[<c001d75c>] (warn_slowpath_common) from [<c001d818>] (warn_slowpath_null+0x1c/0x24)
[<c001d818>] (warn_slowpath_null) from [<c0015e80>] (clk_disable+0xa0/0xa8)
[<c0015e80>] (clk_disable) from [<c02507f8>] (pxa2xx_spi_suspend+0x2c/0x34)
[<c02507f8>] (pxa2xx_spi_suspend) from [<c0200360>] (platform_pm_suspend+0x2c/0x54)
[<c0200360>] (platform_pm_suspend) from [<c0207fec>] (dpm_run_callback.isra.14+0x2c/0x74)
[<c0207fec>] (dpm_run_callback.isra.14) from [<c0209254>] (__device_suspend+0x120/0x2f8)
[<c0209254>] (__device_suspend) from [<c0209a94>] (dpm_suspend+0x50/0x208)
[<c0209a94>] (dpm_suspend) from [<c00455ac>] (suspend_devices_and_enter+0x8c/0x3a0)
[<c00455ac>] (suspend_devices_and_enter) from [<c0045ad4>] (pm_suspend+0x214/0x2a8)
[<c0045ad4>] (pm_suspend) from [<c04b5c34>] (test_suspend+0x14c/0x1dc)
[<c04b5c34>] (test_suspend) from [<c000880c>] (do_one_initcall+0x8c/0x1fc)
[<c000880c>] (do_one_initcall) from [<c04aecfc>] (kernel_init_freeable+0xf4/0x1b4)
[<c04aecfc>] (kernel_init_freeable) from [<c0378078>] (kernel_init+0x8/0xec)
[<c0378078>] (kernel_init) from [<c0009590>] (ret_from_fork+0x14/0x24)
---[ end trace 46524156d8faa4f6 ]---

This happens because suspend function tries to disable a clock that is
already disabled by runtime_suspend callback. Add if
(!pm_runtime_suspended()) checks to suspend/resume path.

Fixes: 7d94a505 (spi/pxa2xx: add support for runtime PM)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The info pointer points to an uninitialized kmalloced space.
If a device doesn't have clk property, then info->clk may
have unpredicated value and cause call trace. So use kzalloc
to make sure it is NULL initialized.
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We can call this function for a dummy console that doesn't support
setting the font mapping, which will result in a null ptr BUG. So check
for this case and return error for consoles w/o font mapping support.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The calculation of value quot for highspeed register set to three
was wrong. This patch fixes the calculation so that the serial port
for baudrates bigger then 576000 baud is working correctly.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>