- 02 Apr, 2022 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - build fix for gpio - fix crc32 build problems - check for failed memory allocations * tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: crypto: Fix CRC32 code MIPS: rb532: move GPIOD definition into C-files MIPS: lantiq: check the return value of kzalloc() mips: sgi-ip22: add a check for the return of kzalloc()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr - Documentation improvements - Prevent module exit until all VMs are freed - PMU Virtualization fixes - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences - Other miscellaneous bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: fix sending PV IPI KVM: x86/mmu: do compare-and-exchange of gPTE via the user address KVM: x86: Remove redundant vm_entry_controls_clearbit() call KVM: x86: cleanup enter_rmode() KVM: x86: SVM: fix tsc scaling when the host doesn't support it kvm: x86: SVM: remove unused defines KVM: x86: SVM: move tsc ratio definitions to svm.h KVM: x86: SVM: fix avic spec based definitions again KVM: MIPS: remove reference to trap&emulate virtualization KVM: x86: document limitations of MSR filtering KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr KVM: x86/emulator: Emulate RDPID only if it is enabled in guest KVM: x86/pmu: Fix and isolate TSX-specific performance event logic KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs KVM: x86: Trace all APICv inhibit changes and capture overall status KVM: x86: Add wrappers for setting/clearing APICv inhibits KVM: x86: Make APICv inhibit reasons an enum and cleanup naming KVM: X86: Handle implicit supervisor access with SMAP KVM: X86: Rename variable smap to not_smap in permission_fault() ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver fix from Jens Axboe: "Got two reports on nbd spewing warnings on load now, which is a regression from a commit that went into your tree yesterday. Revert the problematic change for now" * tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block: Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fix from Bjorn Helgaas: - Fix Hyper-V "defined but not used" build issue added during merge window (YueHaibing) * tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hv: Remove unused hv_set_msi_entry_from_desc()
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Check for EC device - Fix a crash when using the cros_ec_typec driver on older hardware not capable of typec commands - Make try power role optional - Mux configuration reorganization series from Prashant cros_ec_debugfs: - Fix use after free. Thanks Tzung-bi sensorhub: - cros_ec_sensorhub fixup - Split trace include file misc: - Add new mailing list for chrome-platform development: chrome-platform@lists.linux.dev Now with patchwork!" * tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: detach log reader wq from devm platform: chrome: Split trace include file platform/chrome: cros_ec_typec: Update mux flags during partner removal platform/chrome: cros_ec_typec: Configure muxes at start of port update platform/chrome: cros_ec_typec: Get mux state inside configure_mux platform/chrome: cros_ec_typec: Move mux flag checks platform/chrome: cros_ec_typec: Check for EC device platform/chrome: cros_ec_typec: Make try power role optional MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
-
Jens Axboe authored
This reverts commit 6d35d04a. Both Gabriel and Borislav report that this commit casues a regression with nbd: sysfs: cannot create duplicate filename '/dev/block/43:0' Revert it before 5.18-rc1 and we'll investigage this separately in due time. Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/Reported-by:
Gabriel L. Somlo <somlo@cmu.edu> Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Eric Dumazet authored
Commit 7ea1a012 ("watch_queue: Free the alloc bitmap when the watch_queue is torn down") took care of the bitmap, but not the page array. BUG: memory leak unreferenced object 0xffff88810d9bc140 (size 32): comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s) hex dump (first 32 bytes): 40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc_array include/linux/slab.h:621 [inline] kcalloc include/linux/slab.h:652 [inline] watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251 pipe_ioctl+0x82/0x140 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] Reported-by: syzbot+25ea042ae28f3888727a@syzkaller.appspotmail.com Fixes: c73be61c ("pipe: Add general notification queue support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220322004654.618274-1-eric.dumazet@gmail.com/Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt (Google) authored
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. To not have the code silently bitrot, still allow building it with COMPILE_TEST. And to prevent the uapi header from being installed, then later changed, and then have an old distro user space see the old version, move the header file out of the uapi directory. Surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.comSuggested-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Li RongQing authored
If apic_id is less than min, and (max - apic_id) is greater than KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but the new apic_id does not fit the bitmask. In this case __send_ipi_mask should send the IPI. This is mostly theoretical, but it can happen if the apic_ids on three iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0. Fixes: aaffcfd1 ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it can go through get_user_pages_fast(), but if it cannot then it tries to use memremap(); that is not just terribly slow, it is also wrong because it assumes that the VM_PFNMAP VMA is contiguous. The right way to do it would be to do the same thing as hva_to_pfn_remapped() does since commit add6a0cd ("KVM: MMU: try to fix up page faults before giving up", 2016-07-05), using follow_pte() and fixup_user_fault() to determine the correct address to use for memremap(). To do this, one could for example extract hva_to_pfn() for use outside virt/kvm/kvm_main.c. But really there is no reason to do that either, because there is already a perfectly valid address to do the cmpxchg() on, only it is a userspace address. That means doing user_access_begin()/user_access_end() and writing the code in assembly to handle exceptions correctly. Worse, the guest PTE can be 8-byte even on i686 so there is the extra complication of using cmpxchg8b to account for. But at least it is an efficient mess. (Thanks to Linus for suggesting improvement on the inline assembly). Reported-by:
Qiuhao Li <qiuhao@sysec.org> Reported-by:
Gaoning Pan <pgn@zju.edu.cn> Reported-by:
Yongkang Jia <kangel@zju.edu.cn> Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com Debugged-by:
Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by:
Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: bd53cb35 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs") Signed-off-by:
-
Zhenzhong Duan authored
When emulating exit from long mode, EFER_LMA is cleared with vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE again in exit_lmode() explicitly. In case EFER isn't supported by hardware, long mode isn't supported, so exit_lmode() cannot be reached. Note that, thanks to the shadow controls mechanism, this change doesn't eliminate vmread or vmwrite. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com> Signed-off-by:
-
Zhenzhong Duan authored
vmx_set_efer() sets uret->data but, in fact if the value of uret->data will be used vmx_setup_uret_msrs() will have rewritten it with the value returned by update_transition_efer(). uret->data is consumed if and only if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care of (a) updating uret->data before setting uret->load_into_hardware to true (b) setting uret->load_into_hardware to false if uret->data isn't updated. Opportunistically use "vmx" directly instead of redoing to_vmx(). Signed-off-by:
-
Maxim Levitsky authored
It was decided that when TSC scaling is not supported, the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0' value. However in this case kvm_max_tsc_scaling_ratio is not set, which breaks various assumptions. Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of host support. For consistency, do the same for VMX. Suggested-by:
-
Maxim Levitsky authored
Remove some unused #defines from svm.c Signed-off-by:
-
Maxim Levitsky authored
Another piece of SVM spec which should be in the header file Signed-off-by:
-
Maxim Levitsky authored
Due to wrong rebase, commit 4a204f78 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255") moved avic spec #defines back to avic.c. Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12 bits as well (it will be used in nested avic) Signed-off-by:
-
Paolo Bonzini authored
Signed-off-by:
-
Paolo Bonzini authored
MSR filtering requires an exit to userspace that is hard to implement and would be very slow in the case of nested VMX vmexit and vmentry MSR accesses. Document the limitation. Signed-off-by: -
Hou Wenlong authored
If MSR access is rejected by MSR filtering, kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED, and the return value is only handled well for rdmsr/wrmsr. However, some instruction emulation and state transition also use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger some unexpected results if MSR access is rejected, E.g. RDPID emulation would inject a #UD but RDPID wouldn't cause a exit when RDPID is supported in hardware and ENABLE_RDTSCP is set. And it would also cause failure when load MSR at nested entry/exit. Since msr filtering is based on MSR bitmap, it is better to only do MSR filtering for rdmsr/wrmsr. Signed-off-by:
Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com> Signed-off-by:
-
Hou Wenlong authored
When RDTSCP is supported but RDPID is not supported in host, RDPID emulation is available. However, __kvm_get_msr() would only fail when RDTSCP/RDPID both are disabled in guest, so the emulator wouldn't inject a #UD when RDPID is disabled but RDTSCP is enabled in guest. Fixes: fb6d4d34 ("KVM: x86: emulate RDPID") Signed-off-by:
-
Like Xu authored
HSW_IN_TX* bits are used in generic code which are not supported on AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence using HSW_IN_TX* bits unconditionally in generic code is resulting in unintentional pmu behavior on AMD. For example, if EventSelect[11:8] is 0x2, pmc_reprogram_counter() wrongly assumes that HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0. Also per the SDM, both bits 32 and 33 "may only be set if the processor supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set for IA32_PERFEVTSEL2." Opportunistically eliminate code redundancy, because if the HSW_IN_TX* bit is set in pmc->eventsel, it is already set in attr.config. Reported-by:
Ravi Bangoria <ravi.bangoria@amd.com> Reported-by:
Jim Mattson <jmattson@google.com> Fixes: 103af0a9 ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5") Co-developed-by:
Like Xu <likexu@tencent.com> Message-Id: <20220309084257.88931-1-likexu@tencent.com> Signed-off-by:
-
Maxim Levitsky authored
It makes more sense to print new SPTE value than the old value. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220302102457.588450-1-mlevitsk@redhat.com> Signed-off-by:
-
Jim Mattson authored
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some reserved bits are cleared, and some are not. Specifically, on Zen3/Milan, bits 19 and 42 are not cleared. When emulating such a WRMSR, KVM should not synthesize a #GP, regardless of which bits are set. However, undocumented bits should not be passed through to the hardware MSR. So, rather than checking for reserved bits and synthesizing a #GP, just clear the reserved bits. This may seem pedantic, but since KVM currently does not support the "Host/Guest Only" bits (41:40), it is necessary to clear these bits rather than synthesizing #GP, because some popular guests (e.g Linux) will set the "Host Only" bit even on CPUs that don't support EFER.SVME, and they don't expect a #GP. For example, root@Ubuntu1804:~# perf stat -e r26 -a sleep 1 Performance counter stats for 'system wide': 0 r26 1.001070977 seconds time elapsed Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30) Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace: Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90 Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by:Lotus Fenn <lotusf@google.com> Signed-off-by:
David Dunn <daviddunn@google.com> Message-Id: <20220226234131.2167175-1-jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
Trace all APICv inhibit changes instead of just those that result in APICv being (un)inhibited, and log the current state. Debugging why APICv isn't working is frustrating as it's hard to see why APICv is still inhibited, and logging only the first inhibition means unnecessary onion peeling. Opportunistically drop the export of the tracepoint, it is not and should not be used by vendor code due to the need to serialize toggling via apicv_update_lock. Note, using the common flow means kvm_apicv_init() switched from atomic to non-atomic bitwise operations. The VM is unreachable at init, so non-atomic is perfectly ok. Signed-off-by:
-
Sean Christopherson authored
Add set/clear wrappers for toggling APICv inhibits to make the call sites more readable, and opportunistically rename the inner helpers to align with the new wrappers and to make them more readable as well. Invert the flag from "activate" to "set"; activate is painfully ambiguous as it's not obvious if the inhibit is being activated, or if APICv is being activated, in which case the inhibit is being deactivated. For the functions that take @set, swap the order of the inhibit reason and @set so that the call sites are visually similar to those that bounce through the wrapper. Signed-off-by:
-
Sean Christopherson authored
Use an enum for the APICv inhibit reasons, there is no meaning behind their values and they most definitely are not "unsigned longs". Rename the various params to "reason" for consistency and clarity (inhibit may be confused as a command, i.e. inhibit APICv, instead of the reason that is getting toggled/checked). No functional change intended. Signed-off-by:
-
Lai Jiangshan authored
There are two kinds of implicit supervisor access implicit supervisor access when CPL = 3 implicit supervisor access when CPL < 3 Current permission_fault() handles only the first kind for SMAP. But if the access is implicit when SMAP is on, data may not be read nor write from any user-mode address regardless the current CPL. So the second kind should be also supported. The first kind can be detect via CPL and access mode: if it is supervisor access and CPL = 3, it must be implicit supervisor access. But it is not possible to detect the second kind without extra information, so this patch adds an artificial PFERR_EXPLICIT_ACCESS into @access. This extra information also works for the first kind, so the logic is changed to use this information for both cases. The value of PFERR_EXPLICIT_ACCESS is deliberately chosen to be bit 48 which is in the most significant 16 bits of u64 and less likely to be forced to change due to future hardware uses it. This patch removes the call to ->get_cpl() for access mode is determined by @access. Not only does it reduce a function call, but also remove confusions when the permission is checked for nested TDP. The nested TDP shouldn't have SMAP checking nor even the L2's CPL have any bearing on it. The original code works just because it is always user walk for NPT and SMAP fault is not set for EPT in update_permission_bitmask. Signed-off-by:
Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20220311070346.45023-5-jiangshanlai@gmail.com> Signed-off-by:
-
Lai Jiangshan authored
Comments above the variable says the bit is set when SMAP is overridden or the same meaning in update_permission_bitmask(): it is not subjected to SMAP restriction. Renaming it to reflect the negative implication and make the code better readability. Signed-off-by:
-
Lai Jiangshan authored
The commit 09f037aa ("KVM: MMU: speedup update_permission_bitmask") refactored the code of update_permission_bitmask() and change the comments. It added a condition into a list to match the new code, so the number/order for conditions in the comments should be updated too. Signed-off-by:
-
Lai Jiangshan authored
Change the type of access u32 to u64 for FNAME(walk_addr) and ->gva_to_gpa(). The kinds of accesses are usually combinations of UWX, and VMX/SVM's nested paging adds a new factor of access: is it an access for a guest page table or for a final guest physical address. And SMAP relies a factor for supervisor access: explicit or implicit. So @access in FNAME(walk_addr) and ->gva_to_gpa() is better to include all these information to do the walk. Although @access(u32) has enough bits to encode all the kinds, this patch extends it to u64: o Extra bits will be in the higher 32 bits, so that we can easily obtain the traditional access mode (UWX) by converting it to u32. o Reuse the value for the access kind defined by SVM's nested paging (PFERR_GUEST_FINAL_MASK and PFERR_GUEST_PAGE_MASK) as @error_code in kvm_handle_page_fault(). Signed-off-by:
-
David Woodhouse authored
It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Sean Christopherson authored
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code with a unified enum/bitmask. Using explicit names makes it easier to review and audit call sites. Opportunistically add a WARN to prevent passing garbage; instantating a cache without declaring its usage is either buggy or pointless. Signed-off-by:
-
Peter Gonda authored
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(), which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove include from svm_onhpyerv.c which was done only because of lack of include in svm.h. Fixes: 883b0a91 ("KVM: SVM: Move Nested SVM Implementation to nested.c") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20220304161032.2270688-1-pgonda@google.com> Signed-off-by:
-
Jim Mattson authored
The third nybble of AMD's event select overlaps with Intel's IN_TX and IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel platforms that support TSX. Declare a raw_event_mask in the kvm_pmu structure, initialize it in the vendor-specific pmu_refresh() functions, and use that mask for PERF_TYPE_RAW configurations in reprogram_gp_counter(). Fixes: 710c4765 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW") Signed-off-by:
-
Sean Christopherson authored
Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
David Woodhouse authored
If the cache's user host virtual address becomes invalid, there is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc() could release the pfn but the gpc->pfn field has not been overwritten with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will call put_page again on the same page. Cc: stable@vger.kernel.org Fixes: 982ed0de ("KVM: Reinstate gfn_to_pfn_cache with invalidation support") Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Sean Christopherson authored
Re-introduce zapping only leaf SPTEs in kvm_zap_gfn_range() and kvm_tdp_mmu_unmap_gfn_range(), this time without losing a pending TLB flush when processing multiple roots (including nested TDP shadow roots). Dropping the TLB flush resulted in random crashes when running Hyper-V Server 2019 in a guest with KSM enabled in the host (or any source of mmu_notifier invalidations, KSM is just the easiest to force). This effectively revert commits 873dd122 and fcb93eb6, and thus restores commit cf3e2642, plus this delta on top: bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, gfn_t end, struct kvm_mmu_page *root; for_each_tdp_mmu_root_yield_safe(kvm, root, as_id) - flush = tdp_mmu_zap_leafs(kvm, root, start, end, can_yield, false); + flush = tdp_mmu_zap_leafs(kvm, root, start, end, can_yield, flush); return flush; } Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220325230348.2587437-1-seanjc@google.com> Signed-off-by:
-
Yi Wang authored
As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b0677 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by:Yi Liu <liu.yi24@zte.com.cn> Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
If kvm->arch.tdp_mmu_zap_wq cannot be created, the failure has to be propagated up to kvm_mmu_init_vm and kvm_arch_init_vm. kvm_arch_init_vm also has to undo all the initialization, so group all the MMU initialization code at the beginning and handle cleaning up of kvm_page_track_init. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs updates from Al Viro: "Assorted bits and pieces" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: drop needless assignment in aio_read() clean overflow checks in count_mounts() a bit seq_file: fix NULL pointer arithmetic warning uml/x86: use x86 load_unaligned_zeropad() asm/user.h: killed unused macros constify struct path argument of finish_automount()/do_add_mount() fs: Remove FIXME comment in generic_write_checks()
-
