- 26 Jun, 2024 9 commits
-
-
Johannes Berg authored
When updating a channel context, the code can apply wider bandwidth TDLS STA channel definitions to each and every channel context used by the device, an approach that will surely lead to problems if there is ever more than one. Restrict the wider BW TDLS STA consideration to only TDLS STAs that are actually related to links using the channel context being updated. Fixes: 0fabfaaf ("mac80211: upgrade BW of TDLS peers when possible") Reviewed-by:
Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143707.1ad989acecde.I5c75c94d95c3f4ea84f8ff4253189f4b13bad5c3@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
We've open-coded this twice and will need it again, add ieee80211_tdls_sta_link_id() to get the one link ID for a TDLS STA. Reviewed-by:
-
Johannes Berg authored
In channel switch without an additional channel context, where the reassign logic kicks in, we also need to update the station bandwidth and chandef minimum width correctly to avoid having station rate control configured to wider bandwidth than the channel context. Do that now. Reviewed-by:
-
Johannes Berg authored
Make ieee80211_chan_bw_change() able to use the reserved chanreq (really the chandef part of it) for the calculations, so it can be used _without_ applying the changes first. Remove the comment that indicates this is required, since it no longer is. However, this capability only gets used later. Also, this is not ideal, we really should not different so much between reserved and non-reserved usage, to simplify. That's a further cleanup later though. Reviewed-by:
-
Johannes Berg authored
We'll need this as well for channel switching cases, so add the ability now to pass the chandef to calculate for. Reviewed-by:
-
Johannes Berg authored
We'll need this function to take a new chandef in (some) channel switching cases, so prepare for that by allowing that to be passed and using it if so. Clean up the code a little bit while at it. Reviewed-by:
-
Johannes Berg authored
The code currently handles ECSA (extended channel switch announcement) public action frames. Handle also their protected dual, which actually is protected. Reviewed-by:
-
Johannes Berg authored
Public action extended channel switch announcement (ECSA) frames cannot be protected well, the spec is unclear about what should happen in the presence of stations that can receive protected dual and stations that cannot. Mitigate these issues by not treating public action frames as the absolute truth, only treat them as a hint to stop transmitting (quiet mode), and do the remainder of the CSA handling only when receiving the next beacon (or protected action frame) that contains the CSA; or, if it doesn't, simply stop being quiet and continue operating normally. This limits the exposure to malicious ECSA public action frames, since they cannot cause a disconnect now, only a short interruption in traffic. Reviewed-by:
-
Johannes Berg authored
This code is duplicated many times, refactor it into new separate functions. Reviewed-by:
-
- 18 Jun, 2024 14 commits
-
-
Alexis Lothoré authored
Issuing a system suspend command raises the following warning: WARNING: CPU: 0 PID: 15 at drivers/mmc/core/sdio.c:1042 mmc_sdio_suspend+0xd4/0x19c CPU: 0 PID: 15 Comm: kworker/u2:1 Not tainted 6.7.0-rc1-wt+ #710 Hardware name: Atmel SAMA5 Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __warn+0x98/0x160 __warn from warn_slowpath_fmt+0xcc/0x140 warn_slowpath_fmt from mmc_sdio_suspend+0xd4/0x19c mmc_sdio_suspend from mmc_bus_suspend+0x50/0x70 mmc_bus_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from async_suspend+0x24/0x9c async_suspend from async_run_entry_fn+0x6c/0x210 async_run_entry_fn from process_one_work+0x3a0/0x870 [...] This warning is due to a check in SDIO core ensuring that interrupts do not remain enabled for cards being powered down during suspend. WILC driver currently does not set the MMC_PM_KEEP_POWER flag, so disable interrupt when entering resume. Signed-off-by:
Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-6-c2f766d0988c@bootlin.com
-
Alexis Lothoré authored
WILC1000 suspend/resume implementation is currently composed of two parts: suspend/resume ops implemented in cfg80211 ops, which merely sets a flag, and suspend/resume ops in sdio/spi driver which, based on this flag, execute or not the suspend/resume mechanism. This dual set of ops is not really needed , so keep only the sdio part to implement suspend/resume. While doing so, remove the now unused suspend_event flag. Signed-off-by:
-
Alexis Lothoré authored
Just move the suspend method next to the resume method in the sdio part Signed-off-by:
-
Alexis Lothoré authored
There is no reason to keep the MMC host claimed during suspend. Signed-off-by:
-
Alexis Lothoré authored
host_wakeup_notify and host_sleep_notify are surrounded by chip_wakeup and chip_allow_sleep calls, which theorically need to be protected with the hif_cs lock. This lock protection is currently missing. Instead of adding the lock where those two functions are called, move those in host->chip suspend notifications to benefit from the lock already used there (in bus_acquire/bus_release) Signed-off-by:
-
Ajay Singh authored
Driver systematically disables some power mechanism each time it starts the chip firmware (so mostly when interface is brought up). This has a negative impact on some specific scenarios when the chip is exposed as a hotpluggable SDIO card (eg: WILC1000 SD): - when executing suspend/resume sequence while interface has been brought up - rebooting the platform while module is plugged and interface has been brought up Those scenarios lead to mmc core trying to initialize again the chip which is now unresponsive (because of the power sequencer setting), so it fails in mmc_rescan->mmc_attach_sdio and enter a failure loop while trying to send CMD5: mmc0: error -110 whilst initialising SDIO card mmc0: error -110 whilst initialising SDIO card mmc0: error -110 whilst initialising SDIO card [...] Preventing the driver from disabling this "power sequencer" fixes those enumeration issues without affecting nominal operations. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Russell King (Oracle) authored
wlcore firmware versions are structured thusly: chip.if-type.major.sub-type.minor e.g. 8 9 0 0 58 With WL18xx ignoring the major firmware version, looking for a firmware version that conforms to: chip >= 8 if-type >= 9 major (don't care) sub-type (don't care) minor >= 58 Each test is satisfied if the value read from the firmware is greater than the minimum, but if it is equal (or we don't care about the field), then the next field is checked. Thus it doesn't recognise 8.9.1.x.0 as being newer than 8.9.0.x.58 since the major and sub-type numbers are "don't care" and the minor needs to be greater or equal to 58. We need to change the major version from "ignore" to "0" for this later firmware to be correctly detected, and allow the dual-firmware version support to work. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King (Oracle) authored
Add the necessary code to read the 8.9.1 firmware status into the driver private status structure, augmenting the 8.9.0 firmware status code. New structure layout taken from: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7Signed-off-by:
-
Russell King (Oracle) authored
TI Wl18xx firmware adds a "pn16" field for AES and TKIP keys as per their patch: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Add support for this, but rather than requiring the field to be present (which would break existing firmwares), make it optional. Signed-off-by:
-
Russell King (Oracle) authored
Updates for WL18xx firmware 8.9.1.x.x need to know the AP encryption key type. Store this when a new key is set. Patch extracted from: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7Signed-off-by:
-
Russell King (Oracle) authored
wlcore_fw_status() is passed a pointer to the struct wl_fw_status to decode the status into, which is always wl->fw_status. Rather than referencing wl->fw_status within wlcore_fw_status(), use the supplied argument so that we access this member in a consistent manner. Signed-off-by:
-
Russell King (Oracle) authored
Referring to status->counters.tx_lnk_free_pkts[i] multiple times leads to less efficient code. Cache this value in a local variable. This also makes the code clearer. Signed-off-by:
-
Russell King (Oracle) authored
wl18xx_tx_immediate_complete() iterates through the completed transmit descriptors in a circular fashion, and in doing so uses a modulus operation that is not a power of two. This leads to inefficient code generation, which can be easily solved by providing a helper to increment to the next descriptor. Use this more efficient solution. Signed-off-by:
-
Russell King (Oracle) authored
Fix the calculation of clear_offset, which may overflow the end of the buffer. However, this is harmless if it does because in that case it will be recalculated when we copy the chunk of messages at the start of the buffer. Signed-off-by:
-
- 12 Jun, 2024 17 commits
-
-
Wolfram Sang authored
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_timeout() causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_interruptible_timeout() causing patterns like: timeout = wait_for_completion_interruptible_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Fix to the proper variable type 'long' while here. Signed-off-by:
-
Wolfram Sang authored
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_timeout() causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Signed-off-by:
-
Wolfram Sang authored
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_event_timeout() causing patterns like: timeout = wait_event_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Fix to the proper variable type 'long' while here. Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Erick Archer authored
This is an effort to get rid of all multiplications from allocation functions in order to prevent integer overflows [1][2]. As the "cmd_buf" variable is a pointer to "struct at76_command" and this structure ends in a flexible array: struct at76_command { [...] u8 data[]; } __packed; the preferred way in the kernel is to use the struct_size() helper to do the arithmetic instead of the calculation "size + count" in the kmalloc() function. Also, declare a new variable (total_size) since the return value of the struct_size() helper is used several times. At the same time, prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). In this case, it is important to note that the attribute used is "__counted_by_le" since the counter type is "__le16". This way, the code is more readable and safer. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/160 [2] Signed-off-by:Erick Archer <erick.archer@outlook.com> Signed-off-by:
-
Erick Archer authored
It is preferred to use sizeof(*pointer) instead of sizeof(type) due to the type of the variable can change and one needs not change the former (unlike the latter). This patch has no effect on runtime behavior. At the same time remove some redundant NULL initializations. Signed-off-by:
-
Shaul Triebitz authored
This is the first step towards removing the P2P Device MAC. Use ROC (which uses the AUX MAC) for P2P Device discoveribility and action frames. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Johannes Berg authored
If non-BSS and remain-on-channel (ROC) blocking were to occur simultaneously, they'd step on each other's toes, unblocking when not yet supported. Disentangle these bits, and ROC doesn't need to use the non_bss_link() function then. Fixes: a1efeb82 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by:
-
Miri Korenblit authored
Stop supporting all FWs older than the max API version. These FW versions were supported since v6.5. Signed-off-by:
-
Miri Korenblit authored
When EMLSR gets unblocked, the current code checks if the last exit was due to an EXIT reason (as opposed to a BLOCKING one), and if so, it does nothing, as in this case a MLO scan was scheduled to run in 30 seconds. But the code doesn't consider the time that passed from the last exit, so if immediately after the exit a blocker occurred (e.g. non-BSS interface), and lasts for more than 30 seconds, then the MLO scan and the following link selection will decide not to enter EMLSR, and when the unblocking event finally happens, the reason is still set to the EXIT one, so it will do nothing, and we will not have the chance to re-enable EMLSR. Fix this by checking also the time that has passed since the last exit, only if it is less than 30 seconds, we can count on the scheduled MLO scan. Note that clearing the reason itself can't be done since it is needed for the EMLSR prevention mechanism. Fixes: 2f33561e ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR") Signed-off-by:
-
Yedidya Benshimol authored
This was needed when we had multiple types of transports. Now we only have pcie, so there is no need for this ops. Cleanup the code such as the different trans APIs will call the pcie function directly, instead of calling the callback, and remove struct iwl_trans_ops. Signed-off-by:
Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by:
-
Johannes Berg authored
The TX queue code was mostly moved out to support an internal transport that we were never going to publish, but we're no longer using that. Since we're also going to be dissolving the virtual transport layer entirely, integrate the TX queue code into the PCIe layer. This also has a small kernel of already removing the virtual transport function layer, since iwl_trans_send_cmd() calls iwl_trans_pcie_send_hcmd() directly now, even if that still calls the transport send_cmd method for now, we'll clean it up later. Also, not everything is renamed yet. Signed-off-by:
-
Johannes Berg authored
This needs to include dbg-tlv.h since it uses the value of IWL_FW_INI_ALLOCATION_NUM from that file. Signed-off-by:
-
Johannes Berg authored
This really isn't correct to be in the opmode, do the clamping (and power-of-2 fixup that may be necessary due to this, or even otherwise) in the queue code. Also move down the retrying of the allocation, it should be after all the size fixups, but also it just makes sense, and avoids retrying same-size allocations in the case of the BZ-family A-step workaround. Signed-off-by:
-
Johannes Berg authored
When entering D3 we want to configure skip over DTIM, but it can't use the deflink configuration, that will not even exist. Adjust the code to handle multiple links by taking the min skip, even if we should only have a single active link at this point. Signed-off-by:
-
Miri Korenblit authored
Stop supporting older FWs. Signed-off-by:
-
Miri Korenblit authored
These entries are not used, remove them. Signed-off-by:
-
