__irq_domain_add() has been replaced by irq_domain_instanciate() and so,
it is no more used.

Simply remove it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-21-herve.codina@bootlin.com

um_pci_init() uses __irq_domain_add(). With the introduction of
irq_domain_instantiate(), __irq_domain_add() becomes obsolete.

In order to fully remove __irq_domain_add(), use directly
irq_domain_instantiate().

[ tglx: Fixup struct initializer ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-20-herve.codina@bootlin.com

Domain creation functions use __irq_domain_add(). With the introduction
of irq_domain_instantiate(), __irq_domain_add() becomes obsolete.

In order to fully remove __irq_domain_add(), convert domain
creation function to irq_domain_instantiate()
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-19-herve.codina@bootlin.com

__irq_domain_add() wrappers use directly __irq_domain_add(). With the
introduction of irq_domain_instantiate(), __irq_domain_add() becomes
obsolete.

In order to fully remove __irq_domain_add(), convert wrappers to
irq_domain_instantiate()

[ tglx: Fixup struct initializers ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-18-herve.codina@bootlin.com

Add a devres version of irq_domain_instantiate().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-17-herve.codina@bootlin.com

The current API functions create an irq_domain and also publish this
newly created to domain. Once an irq_domain is published, consumers can
request IRQ in order to use them.

Some interrupt controller drivers have to perform some more operations
with the created irq_domain in order to have it ready to be used.
For instance:
   - Allocate generic irq chips with irq_alloc_domain_generic_chips()
   - Retrieve the generic irq chips with irq_get_domain_generic_chip()
   - Initialize retrieved chips: set register base address and offsets,
     set several hooks such as irq_mask, irq_unmask, ...

With the newly introduced irq_domain_alloc_generic_chips(), an interrupt
controller driver can use the irq_domain_chip_generic_info structure and
set the init() hook to perform its generic chips initialization.

In order to avoid a window where the domain is published but not yet
ready to be used, handle the generic chip creation (i.e the
irq_domain_alloc_generic_chips() call) before the domain is published.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-16-herve.codina@bootlin.com

Most of generic chip drivers need to perform some more additional
initializations on the generic chips allocated before they can be fully
ready.

These additional initializations need to be performed before the IRQ
domain is published to avoid a race condition between IRQ consumers and
suppliers.

Introduce the init() hook to perform these initializations at the right
place just after the generic chip creation. Also introduce the exit() hook
to allow reverting operations done by the init() hook just before the
generic chip is destroyed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-15-herve.codina@bootlin.com

The existing __irq_alloc_domain_generic_chips() uses a bunch of parameters
to describe the generic chips that need to be allocated.

Adding more parameters and wrappers to hide new parameters in the existing
code leads to more and more code without any relevant values and without
any flexibility.

Introduce irq_domain_alloc_generic_chips() where the generic chips
description is done using the irq_domain_chip_generic_info structure
instead of the bunch of parameters to allow flexibility and easy evolution.

Also introduce irq_domain_remove_generic_chips() to revert the operations
done by irq_domain_alloc_generic_chips().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-14-herve.codina@bootlin.com

The current API does not allow additional initialization before the
domain is published. This can lead to a race condition between consumers
and supplier as a domain can be available for consumers before being
fully ready.

Introduce the init() hook to allow additional initialization before
plublishing the domain. Also introduce the exit() hook to revert
operations done in init() on domain removal.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-13-herve.codina@bootlin.com

irq_domain_update_bus_token() is the only way to set the domain bus
token. This is sub-optimal as irq_domain_update_bus_token() can be called
only once the domain is created and needs to revert some operations, change
the domain name and redo the operations.

In order to avoid this revert/change/redo sequence, take the domain bus
into account token during the domain creation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-12-herve.codina@bootlin.com

__irq_domain_create() can fail for several reasons. When it fails it
returns a NULL pointer and so filters out the exact failure reason.
The only user of __irq_domain_create() is irq_domain_instantiate() which
can return a PTR_ERR value. On __irq_domain_create() failure, it uses an
arbitrary error code.

Rather than using this arbitrary error value, make __irq_domain_create()
return is own error code and use that one.

[ tglx: Remove the pointless ERR_CAST. domain is a valid return pointer ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-11-herve.codina@bootlin.com

irq_domain_instantiate() handles all needs to be used in
irq_domain_create_hierarchy()

Avoid code duplication and use directly irq_domain_instantiate() for
hierarchy domain creation.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-10-herve.codina@bootlin.com

To use irq_domain_instantiate() from irq_domain_create_hierarchy(),
irq_domain_instantiate() needs to handle the domain hierarchy parent.

Add the required functionality.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-9-herve.codina@bootlin.com

In order to use irq_domain_instantiate() from several places such as
irq_domain_create_hierarchy(), irq_domain_instantiate() needs to handle
additional domain flags.

Add the required infrastructure.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-8-herve.codina@bootlin.com

The existing __irq_domain_create() use a bunch of parameters to create
an irq domain.

With the introduction of irq_domain_info structure, these parameters are
available in the information structure itself.
Using directly this information structure allows future flexibility to
add other parameters in a simple way without the need to change the
__irq_domain_create() prototype.

Convert __irq_domain_create() to use the information structure.

[ tglx: Fixup struct initializer ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-7-herve.codina@bootlin.com

The interrupt domain name computation and setting is directly done in
__irq_domain_create(). This leads to a quite long __irq_domain_create()
function.

In order to simplify __irq_domain_create() and isolate the domain name
computation and setting, move the related operations to a dedicated
function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-6-herve.codina@bootlin.com

The fwnode parameter has no reason to be a pointer to an un-const struct
fwnode_handle. Indeed, struct fwnode_handle is not supposed to be modified
by the function.

Be consistent with other function performing the same kind of operation
such as is_of_node(), is_acpi_device_node() or is_software_node(): constify
the fwnode parameter.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-5-herve.codina@bootlin.com

The existing irq_domain_add_*() functions used to instantiate an IRQ
domain are wrappers built on top of __irq_domain_add() and describe the
domain properties using a bunch of parameters.

Adding more parameters and wrappers to hide new parameters in the
existing code lead to more and more code without any relevant value and
without any flexibility.

Introduce irq_domain_instantiate() where the interrupt domain properties
are given using a irq_domain_info structure instead of the bunch of
parameters to allow flexibility and easy evolution.

irq_domain_instantiate() performs the same operation as the one done by
__irq_domain_add(). For compatibility reason with existing code, keep
__irq_domain_add() but convert it to irq_domain_instantiate().

[ tglx: Fixed up struct initializer coding style ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-3-herve.codina@bootlin.com

In preparation of the introduction of the irq domain instantiation,
introduce irq_domain_free() to avoid code duplication on later
modifications.

This new function is an extraction of the current operations performed
to free the irq domain. No functional change intended.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-2-herve.codina@bootlin.com

fwnode_handle_get(fwnode) is called when a domain is created with fwnode
passed as a function parameter. fwnode_handle_put(domain->fwnode) is called
when the domain is destroyed but during the creation a path exists that
does not set domain->fwnode.

If this path is taken, the fwnode get will never be put.

To avoid the unbalanced get and put, set domain->fwnode unconditionally.

Fixes: d59f6617 ("genirq: Allow fwnode to carry name information only")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614173232.1184015-4-herve.codina@bootlin.com

The GIC architecture specification defines a set of registers for
redistributors and ITSes that control the sharebility and cacheability
attributes of redistributors/ITSes initiator ports on the interconnect
(GICR_[V]PROPBASER, GICR_[V]PENDBASER, GITS_BASER<n>).

Architecturally the GIC provides a means to drive shareability and
cacheability attributes signals but it is not mandatory for designs to
wire up the corresponding interconnect signals that control the
cacheability/shareability of transactions.

Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes the
redistributors and ITSes non-coherent observers.

To enable non-coherent GIC designs on ACPI based systems, parse the MADT
GICC/GICR/ITS subtables non-coherent flags to determine whether the
respective components are non-coherent observers and force the
shareability attributes to be programmed into the redistributors and
ITSes registers.

An ACPI global function (acpi_get_madt_revision()) is added to retrieve
the MADT revision, in that it is essential to check the MADT revision
before checking for flags that were added with MADT revision 7 so that
if the kernel is booted with an ACPI MADT table with revision < 7 it
skips parsing the newly added flags (that should be zeroed reserved
values for MADT versions < 7 but they could turn out to be buggy and
should be ignored).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240606094238.757649-2-lpieralisi@kernel.org

The IX45 block has additional mask registers (NMSK/IMSK/TMSK) compared
to the RZ/G2L (family) SoC.

A new rzfive_irqc_chip irq_chip is introduced for RZ/Five, where function
pointers for irq_[un]mask() and irq_[dis|en]able() handle the ([un]masking
of the interrupts. The irq_chip pointer is now passed as an init callback
and stored in the priv pointer to differentiate between RZ/G2L and RZ/Five.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240604173710.534132-3-prabhakar.mahadev-lad.rj@bp.renesas.com

Document RZ/Five (R9A07G043F) IRQC bindings. The IRQC block on the RZ/Five
SoC is almost identical to the one found on the RZ/G2L SoC, with the only
difference being that it has additional mask control registers for
NMI/IRQ/TINT.

Hence new compatible string "renesas,r9a07g043f-irqc" is added for RZ/Five
SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240604173710.534132-2-prabhakar.mahadev-lad.rj@bp.renesas.com

During compilation, several warning of the following form were raised:
  Function parameter or struct member 'x' not described in 'yyy'

Add the missing function parameter descriptions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240527161450.326615-10-herve.codina@bootlin.com

Improve the readability of irqdomain debugging information in debugfs by
printing the flags field of domain files as human-readable strings instead
of a raw bitmask, which aligned with the existing style used for irqchip
flags in the irq debug files.

Before:
	#cat :cpus:cpu@0:interrupt-controller
	name:   :cpus:cpu@0:interrupt-controller
	 size:   0
	 mapped: 2
	 flags:  0x00000003

After:
	#cat :cpus:cpu@0:interrupt-controller
	name:   :cpus:cpu@0:interrupt-controller
	 size:   0
	 mapped: 3
	 flags:  0x00000003
	            IRQ_DOMAIN_FLAG_HIERARCHY
	            IRQ_DOMAIN_NAME_ALLOCATED
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240529091628.3666379-1-ruanjinjie@huawei.com

Interrupts which have no action and chained interrupts can be
ignored due to the following reasons (as per tglx's comment):

  1) Interrupts which have no action are completely uninteresting as
     there is no real information attached.

  2) Chained interrupts do not have a count at all.

So there is no point to evaluate the number of accounted interrupts before
checking for non-requested or chained interrupts.

Remove the any_count logic and simply check whether the interrupt
descriptor has the kstat_irqs member populated.

[ tglx: Adapted to upstream changes ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiwei Sun <sunjw10@lenovo.com>
Link: https://lore.kernel.org/r/20240515100632.1419-1-ahuang12@lenovo.com
Link: https://lore.kernel.org/lkml/87h6f0knau.ffs@tglx/

Pull ata fixes from Niklas Cassel:

 - Add a quirk for three different devices that have shown issues with
   LPM (link power management). These devices appear to not implement
   LPM properly, since we see command timeouts when enabling LPM. The
   quirk disables LPM for these problematic devices. (Me)

 - Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
   needed and was originally added by mistake when LPM support was
   enabled for this AHCI controller. Enabling the quirk when not needed
   causes the the controller to not be able to detect the connected
   devices on some platforms.

* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
  ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
  ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous topology parsing fixes:

   - Fix topology parsing regression on older CPUs in the new AMD/Hygon
     parser

   - Fix boot crash on odd Intel Quark and similar CPUs that do not fill
     out cpuinfo_x86::x86_clflush_size and zero out
     cpuinfo_x86::x86_cache_alignment as a result.

     Provide 32 bytes as a general fallback value.

   - Fix topology enumeration on certain rare CPUs where the BIOS locks
     certain CPUID leaves and the kernel unlocked them late, which broke
     with the new topology parsing code. Factor out this unlocking logic
     and move it earlier in the parsing sequence"

* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology/intel: Unlock CPUID before evaluating anything
  x86/cpu: Provide default cache line size if not enumerated
  x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater

Pull scheduler fix from Ingo Molnar:
 "Export a symbol to make life easier for instrumentation/debugging"

* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/x86: Export 'percpu arch_freq_scale'

Pull perf events fix from Ingo Molnar:
 "Add missing MODULE_DESCRIPTION() lines"

* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
  perf/x86/rapl: Add missing MODULE_DESCRIPTION() line

Pull hardening fixes from Kees Cook:

 - scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
   strings

 - mailmap: update entry for Kees Cook

 - kunit/fortify: Remove __kmalloc_node() test

* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kunit/fortify: Remove __kmalloc_node() test
  mailmap: update entry for Kees Cook
  scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings

Pull powerpc fixes from Michael Ellerman:

 - Enforce full ordering for ATOMIC operations with BPF_FETCH

 - Fix uaccess build errors seen with GCC 13/14

 - Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT

 - Drop error message from lparcfg guest name lookup

Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.

* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
  powerpc/uaccess: Use YZ asm constraint for ld
  powerpc/uaccess: Fix build errors seen with GCC 13/14
  powerpc/pseries/lparcfg: drop error message from guest name lookup
  powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH

Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "After merging a commit 1fffe7a3 ("script: modpost: emit a warning
  when the description is missing"), MODULE_DESCRIPTOR seems to be
  mandatory for kernel modules. In FireWire subsystem, the most of
  practical kernel modules have the field, while KUnit test modules do
  not. A single patch is applied to fix them"

* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: add missing MODULE_DESCRIPTION() to test modules

Pull smb client fixes from Steve French:
 "Two small smb3 fixes:

   - Fix socket creation with sfu mount option (spotted by test generic/423)

   - Minor cleanup: fix missing description in two files"

* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix creating sockets when using sfu mount options
  fs: smb: common: add missing MODULE_DESCRIPTION() macros

Merge tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix a Kconfig bug regarding comparisons to 'm' or 'n'

 - Replace missed $(srctree)/$(src)

 - Fix unneeded kallsyms step 3

 - Remove incorrect "compatible" properties from image nodes in
   image.fit

 - Improve gen_kheaders.sh

 - Fix 'make dt_binding_check'

 - Clean up unnecessary code

* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
  kheaders: use `command -v` to test for existence of `cpio`
  kheaders: explicitly define file modes for archived headers
  scripts/make_fit: Drop fdt image entry compatible string
  kbuild: remove a stale comment about cleaning in link-vmlinux.sh
  kbuild: fix short log for AS in link-vmlinux.sh
  kbuild: change scripts/mksysmap into sed script
  kbuild: avoid unneeded kallsyms step 3
  kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
  kconfig: remove redundant check in expr_join_or()
  kconfig: fix comparison to constant symbols, 'm', 'n'
  kconfig: remove unused expr_is_no()

Pull xfs fixes from Chandan Babu:

 - Fix a livelock by dropping an xfarray sortinfo folio when an error
   is encountered

 - During extended attribute operations, Initialize transaction
   reservation computation based on attribute operation code

 - Relax symbolic link's ondisk verification code to allow symbolic
   links with short remote targets

 - Prevent soft lockups when unmapping file ranges and also during
   remapping blocks during a reflink operation

 - Fix compilation warnings when XFS is built with W=1 option

* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Add cond_resched to block unmap range and reflink remap path
  xfs: don't open-code u64_to_user_ptr
  xfs: allow symlinks with short remote targets
  xfs: fix xfs_init_attr_trans not handling explicit operation codes
  xfs: drop xfarray sortinfo folio on error
  xfs: Stop using __maybe_unused in xfs_alloc.c
  xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()

Pull tty fix from Greg KH:
 "Here is a single revert for a much-reported regression in 6.10-rc1
  when it comes to a few older architectures.

  Turns out that the VT ioctls don't work the same across all cpu types
  because of some old compatibility requrements for stuff like alpha and
  powerpc. So revert the change that attempted to have them use the
  _IO() macros and go back to the known-working values instead.

  This has NOT been in linux-next but has had many reports that it fixes
  the issue with 6.10-rc1"

* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "VT: Use macros to define ioctls"

Pull landlock fix from Mickaël Salaün:
 "This fixes a wrong path walk triggered by syzkaller"

* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add layout1.refer_mount_root
  landlock: Fix d_parent walk

This reverts commit 8c467f33.

Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>