- 28 May, 2019 12 commits
-
-
Chandan Rajendra authored
In ext4_block_write_begin(), only decrypt the blocks that actually need to be decrypted (up to two blocks which intersect the boundaries of the region that will be written to), rather than assuming blocksize == PAGE_SIZE and decrypting the whole page. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com> (EB: rebase onto previous changes, improve the commit message, and move the check for encrypted inode) Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Chandan Rajendra authored
If decryption fails, ext4_block_write_begin() can return with the page's buffer_head marked with the BH_Uptodate flag. This commit clears the BH_Uptodate flag in such cases. Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
In __fscrypt_decrypt_bio(), only decrypt the blocks that actually comprise the bio, rather than assuming blocksize == PAGE_SIZE and decrypting the entirety of every page used in the bio. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Rename fscrypt_decrypt_page() to fscrypt_decrypt_pagecache_blocks() and redefine its behavior to decrypt all filesystem blocks in the given region of the given page, rather than assuming that the region consists of just one filesystem block. Also remove the 'inode' and 'lblk_num' parameters, since they can be retrieved from the page as it's already assumed to be a pagecache page. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Currently fscrypt_decrypt_page() does one of two logically distinct things depending on whether FS_CFLG_OWN_PAGES is set in the filesystem's fscrypt_operations: decrypt a pagecache page in-place, or decrypt a filesystem block in-place in any page. Currently these happen to share the same implementation, but this conflates the notion of blocks and pages. It also makes it so that all callers have to provide inode and lblk_num, when fscrypt could determine these itself for pagecache pages. Therefore, move the FS_CFLG_OWN_PAGES behavior into a new function fscrypt_decrypt_block_inplace(). This mirrors fscrypt_encrypt_block_inplace(). This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Adjust fscrypt_zeroout_range() to encrypt a block at a time rather than a page at a time, so that it works when blocksize < PAGE_SIZE. This isn't optimized for performance, but then again this function already wasn't optimized for performance. As a future optimization, we could submit much larger bios here. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Rename fscrypt_encrypt_page() to fscrypt_encrypt_pagecache_blocks() and redefine its behavior to encrypt all filesystem blocks from the given region of the given page, rather than assuming that the region consists of just one filesystem block. Also remove the 'inode' and 'lblk_num' parameters, since they can be retrieved from the page as it's already assumed to be a pagecache page. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
fscrypt_encrypt_page() behaves very differently depending on whether the filesystem set FS_CFLG_OWN_PAGES in its fscrypt_operations. This makes the function difficult to understand and document. It also makes it so that all callers have to provide inode and lblk_num, when fscrypt could determine these itself for pagecache pages. Therefore, move the FS_CFLG_OWN_PAGES behavior into a new function fscrypt_encrypt_block_inplace(). This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Replace some BUG_ON()s with WARN_ON_ONCE() and returning an error code, and move the check for len divisible by FS_CRYPTO_BLOCK_SIZE into fscrypt_crypt_block() so that it's done for both encryption and decryption, not just encryption. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
fscrypt_do_page_crypto() only does a single encryption or decryption operation, with a single logical block number (single IV). So it actually operates on a filesystem block, not a "page" per se. To reflect this, rename it to fscrypt_crypt_block(). Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Now that fscrypt_ctx is not used for writes, remove the 'w' fields. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Currently, bounce page handling for writes to encrypted files is unnecessarily complicated. A fscrypt_ctx is allocated along with each bounce page, page_private(bounce_page) points to this fscrypt_ctx, and fscrypt_ctx::w::control_page points to the original pagecache page. However, because writes don't use the fscrypt_ctx for anything else, there's no reason why page_private(bounce_page) can't just point to the original pagecache page directly. Therefore, this patch makes this change. In the process, it also cleans up the API exposed to filesystems that allows testing whether a page is a bounce page, getting the pagecache page from a bounce page, and freeing a bounce page. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
-
- 26 May, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing warning fix from Steven Rostedt: "Make the GCC 9 warning for sub struct memset go away. GCC 9 now warns about calling memset() on partial structures when it goes across multiple fields. This adds a helper for the place in tracing that does this type of clearing of a structure" * tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Silence GCC 9 array bounds warning
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "The usual smattering of fixes and tunings that came in too late for the merge window, but should not wait four months before they appear in a release. I also travelled a bit more than usual in the first part of May, which didn't help with picking up patches and reports promptly" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits) KVM: x86: fix return value for reserved EFER tools/kvm_stat: fix fields filter for child events KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard kvm: selftests: aarch64: compile with warnings on kvm: selftests: aarch64: fix default vm mode kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION KVM: x86/pmu: do not mask the value that is written to fixed PMUs KVM: x86/pmu: mask the result of rdpmc according to the width of the counters x86/kvm/pmu: Set AMD's virt PMU version to 1 KVM: x86: do not spam dmesg with VMCS/VMCB dumps kvm: Check irqchip mode before assign irqfd kvm: svm/avic: fix off-by-one in checking host APIC ID KVM: selftests: do not blindly clobber registers in guest asm KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow kvm: vmx: Fix -Wmissing-prototypes warnings KVM: nVMX: Fix using __this_cpu_read() in preemptible context kvm: fix compilation on s390 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull /dev/random fix from Ted Ts'o: "Fix a soft lockup regression when reading from /dev/random in early boot" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: fix soft lockup when trying to read from an uninitialized blocking pool
-
Theodore Ts'o authored
Fixes: eb9d1bf0: "random: only read from /dev/random after its pool has received 128 bits" Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Miguel Ojeda authored
Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members. Such a call happens in the trace code to clear, at once, all members after and including `seq` on struct trace_iterator: In function 'memset', inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3: ./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds] 344 | return __builtin_memset(p, c, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member. Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header. Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.comSigned-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [ Removed unnecessary parenthesis around "iter" ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 25 May, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug fixes (including a regression fix) for ext4" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix dcache lookup of !casefolded directories ext4: do not delete unlinked inode from orphan list on failed truncate ext4: wait for outstanding dio during truncate in nojournal mode ext4: don't perform block validity checks on the journal inode
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: - Fix a regression that disabled device-mapper dax support - Remove unnecessary hardened-user-copy overhead (>30%) for dax read(2)/write(2). - Fix some compilation warnings. * tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead dax: Arrange for dax_supported check to span multiple devices libnvdimm: Fix compilation warnings with W=1
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Tom Zanussi sent me some small fixes and cleanups to the histogram code and I forgot to incorporate them. I also added a small clean up patch that was sent to me a while ago and I just noticed it" * tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kernel/trace/trace.h: Remove duplicate header of trace_seq.h tracing: Add a check_val() check before updating cond_snapshot() track_val tracing: Check keys for variable references in expressions too tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
-
Gabriel Krisman Bertazi authored
Found by visual inspection, this wasn't caught by my xfstest, since it's effect is ignoring positive dentries in the cache the fallback just goes to the disk. it was introduced in the last iteration of the case-insensitive patch. d_compare should return 0 when the entries match, so make sure we are correctly comparing the entire string if the encoding feature is set and we are on a case-INsensitive directory. Fixes: b886ee3e ("ext4: Support case-insensitive file name lookups") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is the same set of patches sent in the merge window as the final pull except that Martin's read only rework is replaced with a simple revert of the original change that caused the regression. Everything else is an obvious fix or small cleanup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Revert "scsi: sd: Keep disk read-only when re-reading partition" scsi: bnx2fc: fix incorrect cast to u64 on shift operation scsi: smartpqi: Reporting unhandled SCSI errors scsi: myrs: Fix uninitialized variable scsi: lpfc: Update lpfc version to 12.2.0.2 scsi: lpfc: add check for loss of ndlp when sending RRQ scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show scsi: lpfc: resolve lockdep warnings scsi: qedi: remove set but not used variables 'cdev' and 'udev' scsi: qedi: remove memset/memcpy to nfunc and use func instead scsi: qla2xxx: Add cleanup for PCI EEH recovery
-
- 24 May, 2019 17 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes from a few folks. - bio and sbitmap before atomic barrier fixes (Andrea) - Hang fix for blk-mq freeze and unfreeze (Bob) - Single segment count regression fix (Christoph) - AoE now has a new maintainer - tools/io_uring/ Makefile fix, and sync with liburing (me) * tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits) tools/io_uring: sync with liburing tools/io_uring: fix Makefile for pthread library link blk-mq: fix hang caused by freeze/unfreeze sequence block: remove the bi_seg_{front,back}_size fields in struct bio block: remove the segment size check in bio_will_gap block: force an unlimited segment size on queues with a virt boundary block: don't decrement nr_phys_segments for physically contigous segments sbitmap: fix improper use of smp_mb__before_atomic() bio: fix improper use of smp_mb__before_atomic() aoe: list new maintainer for aoe driver nvme-pci: use blk-mq mapping for unmanaged irqs nvme: update MAINTAINERS nvme: copy MTFA field from identify controller nvme: fix memory leak for power latency tolerance nvme: release namespace SRCU protection before performing controller ioctls nvme: merge nvme_ns_ioctl into nvme_ioctl nvme: remove the ifdef around nvme_nvm_ioctl nvme: fix srcu locking on error return in nvme_get_ns_from_disk nvme: Fix known effects nvme-pci: Sync queues on reset ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - Two fixes to regressions introduced in kselftest Makefile test run output refactoring work (Kees Cook) - Adding Atom support to syscall_arg_fault test (Tong Bo) * tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/timers: Add missing fflush(stdout) calls selftests: Remove forced unbuffering for test running selftests/x86: Support Atom for syscall_arg_fault test
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: - Update checkpatch.pl to use DT vendor-prefixes.yaml - Fix DT binding references to files converted to DT schema - Clean-up Arm CPU binding examples to match schema - Add Sifive block versioning scheme documentation - Pass binding directory base to validation tools for reference lookups * tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: checkpatch.pl: Update DT vendor prefix check dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example dt-bindings: arm: Clean up CPU binding examples dt: fix refs that were renamed to json with the same file name dt-bindings: Pass binding directory to validation tools dt-bindings: sifive: describe sifive-blocks versioning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pule more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98 ...
-
Waiman Long authored
The kernel test robot has reported that the use of __this_cpu_add() causes bug messages like: BUG: using __this_cpu_add() in preemptible [00000000] code: ... Given the imprecise nature of the count and the possibility of resetting the count and doing the measurement again, this is not really a big problem to use the unprotected __this_cpu_*() functions. To make the preemption checking code happy, the this_cpu_*() functions will be used if CONFIG_DEBUG_PREEMPT is defined. The imprecise nature of the locking counts are also documented with the suggestion that we should run the measurement a few times with the counts reset in between to get a better picture of what is going on under the hood. Fixes: a8654596 ("locking/rwsem: Enable lock event counting") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Bonzini authored
Commit 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes", 2019-04-02) introduced a "return false" in a function returning int, and anyway set_efer has a "nonzero on error" conventon so it should be returning 1. Reported-by: Pavel Machek <pavel@denx.de> Fixes: 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes") Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Stefan Raspl authored
The fields filter would not work with child fields, as the respective parents would not be included. No parents displayed == no childs displayed. To reproduce, run on s390 (would work on other platforms, too, but would require a different filter name): - Run 'kvm_stat -d' - Press 'f' - Enter 'instruct' Notice that events like instruction_diag_44 or instruction_diag_500 are not displayed - the output remains empty. With this patch, we will filter by matching events and their parents. However, consider the following example where we filter by instruction_diag_44: kvm statistics - summary regex filter: instruction_diag_44 Event Total %Total CurAvg/s exit_instruction 276 100.0 12 instruction_diag_44 256 92.8 11 Total 276 12 Note that the parent ('exit_instruction') displays the total events, but the childs listed do not match its total (256 instead of 276). This is intended (since we're filtering all but one child), but might be confusing on first sight. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Thomas Huth authored
struct kvm_nested_state is only available on x86 so far. To be able to compile the code on other architectures as well, we need to wrap the related code with #ifdefs. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrew Jones authored
aarch64 fixups needed to compile with warnings as errors. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrew Jones authored
VM_MODE_P52V48_4K is not a valid mode for AArch64. Replace its use in vm_create_default() with a mode that works and represents a good AArch64 default. (We didn't ever see a problem with this because we don't have any unit tests using vm_create_default(), but it's good to get it fixed in advance.) Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrew Jones authored
The memory slot size must be aligned to the host's page size. When testing a guest with a 4k page size on a host with a 64k page size, then 3 guest pages are not host page size aligned. Since we just need a nearly arbitrary number of extra pages to ensure the memslot is not aligned to a 64 host-page boundary for this test, then we can use 16, as that's 64k aligned, but not 64 * 64k aligned. Fixes: 76d58e0f ("KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size", 2019-04-17) Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Christian Borntraeger authored
kselftests exposed a problem in the s390 handling for memory slots. Right now we only do proper memory slot handling for creation of new memory slots. Neither MOVE, nor DELETION are handled properly. Let us implement those. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of each MSR may be written with any value, and the high-order 8 bits are sign-extended according to the value of bit 31", but the fixed counters in real hardware are limited to the width of the fixed counters ("bits beyond the width of the fixed-function counter are reserved and must be written as zeros"). Fix KVM to do the same. Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
This patch will simplify the changes in the next, by enforcing the masking of the counters to RDPMC and RDMSR. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Borislav Petkov authored
After commit: 672ff6cf ("KVM: x86: Raise #GP when guest vCPU do not support PMU") my AMD guests started #GPing like this: general protection fault: 0000 [#1] PREEMPT SMP CPU: 1 PID: 4355 Comm: bash Not tainted 5.1.0-rc6+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:x86_perf_event_update+0x3b/0xa0 with Code: pointing to RDPMC. It is RDPMC because the guest has the hardware watchdog CONFIG_HARDLOCKUP_DETECTOR_PERF enabled which uses perf. Instrumenting kvm_pmu_rdpmc() some, showed that it fails due to: if (!pmu->version) return 1; which the above commit added. Since AMD's PMU leaves the version at 0, that causes the #GP injection into the guest. Set pmu->version arbitrarily to 1 and move it above the non-applicable struct kvm_pmu members. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Cc: Mihai Carabas <mihai.carabas@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86@kernel.org Cc: stable@vger.kernel.org Fixes: 672ff6cf ("KVM: x86: Raise #GP when guest vCPU do not support PMU") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Userspace can easily set up invalid processor state in such a way that dmesg will be filled with VMCS or VMCB dumps. Disable this by default using a module parameter. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Peter Xu authored
When assigning kvm irqfd we didn't check the irqchip mode but we allow KVM_IRQFD to succeed with all the irqchip modes. However it does not make much sense to create irqfd even without the kernel chips. Let's provide a arch-dependent helper to check whether a specific irqfd is allowed by the arch. At least for x86, it should make sense to check: - when irqchip mode is NONE, all irqfds should be disallowed, and, - when irqchip mode is SPLIT, irqfds that are with resamplefd should be disallowed. For either of the case, previously we'll silently ignore the irq or the irq ack event if the irqchip mode is incorrect. However that can cause misterious guest behaviors and it can be hard to triage. Let's fail KVM_IRQFD even earlier to detect these incorrect configurations. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Radim Krčmář <rkrcmar@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-