- 08 Sep, 2014 1 commit
-
-
Johan Hovold authored
Add quirk to make sure that a device is always polled for input events even if it hasn't been opened. This is needed for devices that disconnects from the bus unless the interrupt endpoint has been polled at least once or when not responding to an input event (e.g. after having shut down X). Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 27 Aug, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - fixes for potential memory corruption problems in magicmouse and picolcd drivers (the HW would have to be manufactured to be deliberately evil to trigger those) which were found by Steven Vittitoe - fix for false error message appearing in dmesg from logitech-dj driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: picolcd: sanity check report size in raw_event() callback HID: magicmouse: sanity check report size in raw_event() callback HID: logitech-dj: prevent false errors to be shown
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "The biggest of these comes from Liu Bo, who tracked down a hang we've been hitting since moving to kernel workqueues (it's a btrfs bug, not in the generic code). His patch needs backporting to 3.16 and 3.15 stable, which I'll send once this is in. Otherwise these are assorted fixes. Most were integrated last week during KS, but I wanted to give everyone the chance to test the result, so I waited for rc2 to come out before sending" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: fix task hang under heavy compressed write Btrfs: fix filemap_flush call in btrfs_file_release Btrfs: fix crash on endio of reading corrupted block btrfs: fix leak in qgroup_subtree_accounting() error path btrfs: Use right extent length when inserting overlap extent map. Btrfs: clone, don't create invalid hole extent map Btrfs: don't monopolize a core when evicting inode Btrfs: fix hole detection during file fsync Btrfs: ensure tmpfile inode is always persisted with link count of 0 Btrfs: race free update of commit root for ro snapshots Btrfs: fix regression of btrfs device replace Btrfs: don't consider the missing device when allocating new chunks Btrfs: Fix wrong device size when we are resizing the device Btrfs: don't write any data into a readonly device when scrub Btrfs: Fix the problem that the replace destroys the seed filesystem btrfs: Return right extent when fiemap gives unaligned offset and len. Btrfs: fix wrong extent mapping for DirectIO Btrfs: fix wrong write range for filemap_fdatawrite_range() Btrfs: fix wrong missing device counter decrease Btrfs: fix unzeroed members in fs_devices when creating a fs from seed fs ...
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace buffer epoll hang fix from Steven Rostedt: "Josef Bacik found a bug in the ring_buffer_poll_wait() where the condition variable (waiters_pending) was set before being added to the poll queue via poll_wait(). This allowed for a small race window to happen where an event could come in, check the condition variable see it set to true, clear it, and then wake all the waiters. But because the waiter set the variable before adding itself to the queue, the waker could have cleared the variable after it was set and then miss waking it up as it wasn't added to the queue yet. Discussing this bug, we realized that a memory barrier needed to be added too, for the rare case that something polls for a single trace event to happen (and just one, no more to come in), and miss the wakeup due to memory ordering. Ideally, a memory barrier needs to be added on the writer side too, but as that will kill tracing performance and this is for a situation that tracing wasn't even designed for (who traces one instance of an event, use a printk instead!), this isn't worth adding the barrier. But we can in the future add the barrier for when the buffer goes from empty to the first event, as that would cover this case" * tag 'trace-fixes-v3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: Fix epoll hang when we race with new entries
-
Jiri Kosina authored
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Cc: stable@vger.kernel.org Reported-by:
Steven Vittitoe <scvitti@google.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Cc: stable@vger.kernel.org Reported-by:
Steven Vittitoe <scvitti@google.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 26 Aug, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: - wire up the system calls seccomp, getrandom and memfd_create - use static system information as input to add_device_randomness - .. and three bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp: remove unnecessary XTABS flag s390/3215: fix tty output containing tabs s390: wire up memfd_create syscall s390: add system information as device randomness s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL s390: wire up seccomp and getrandom syscalls
-
Pranith Kumar authored
Update the description for per cpu operations to clarify use cases of this_cpu operations and add considerations for remote access. Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Signed-off-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix scripts/kernel-doc to recognize __meminit in a function prototype and to strip it, as done with many other attributes. Fixes this warning: Warning(..//mm/page_alloc.c:2973): cannot understand function prototype: 'void * __meminit alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask) ' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Josef Bacik authored
Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is empty when we set waiters_pending but an event shows up exactly at that moment we can miss being woken up by the ring buffers irq work. Since ring_buffer_empty() is inherently racey we will sometimes think that the buffer is not empty. So we don't get woken up and we don't think there are any events even though there were some ready when we added the watch, which makes us hang. This patch fixes this by making sure that we are actually on the wait list before we set waiters_pending, and add a memory barrier to make sure ring_buffer_empty() is going to be correct. Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com Cc: stable@vger.kernel.org # 3.10+ Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 25 Aug, 2014 6 commits
-
-
Linus Torvalds authored
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Highlights: - more fixes for read/write codepath regressions * sleeping while holding the inode lock * stricter enforcement of page contiguity when coalescing requests * fix up error handling in the page coalescing code - don't busy wait on SIGKILL in the file locking code" * tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait nfs: can_coalesce_requests must enforce contiguity nfs: disallow duplicate pages in pgio page vectors nfs: don't sleep with inode lock in lock_and_join_requests nfs: fix error handling in lock_and_join_requests nfs: use blocking page_group_lock in add_request nfs: fix nonblocking calls to nfs_page_group_lock nfs: change nfs_page_group_lock argument
-
Linus Torvalds authored
Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver fix from Simon Horman: "Confine SH_INTC to platforms that need it" * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: sh: intc: Confine SH_INTC to platforms that need it
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Pretty much all across the field so with this we should be in reasonable shape for the upcoming -rc2" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: OCTEON: make get_system_type() thread-safe MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init' MIPS: EVA: Add new EVA header MIPS: scall64-o32: Fix indirect syscall detection MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64 MIPS: Loongson: Fix COP2 usage for preemptible kernel MIPS: NL: Fix nlm_xlp_defconfig build error MIPS: Remove race window in page fault handling MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G MIPS: Alchemy: Fix db1200 PSC clock enablement MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785 MIPS: Remove duplicated include from numa.c MIPS: Add common plat_irq_dispatch declaration MIPS: MSP71xx: remove unused plat_irq_dispatch() argument MIPS: GIC: Remove useless parens from GICBIS(). MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt: "The rewrite of the ftrace code that makes it possible to allow for separate trampolines had a design flaw with the interaction between the function and function_graph tracers. The main flaw was the simplification of the use of multiple tracers having the same filter (like function and function_graph, that use the set_ftrace_filter file to filter their code). The design assumed that the two tracers could never run simultaneously as only one tracer can be used at a time. The problem with this assumption was that the function profiler could be implemented on top of the function graph tracer, and the function profiler could run at the same time as the function tracer. This caused the assumption to be broken and when ftrace detected this failed assumpiton it would spit out a nasty warning and shut itself down. Instead of using a single ftrace_ops that switches between the function and function_graph callbacks, the two tracers can again use their own ftrace_ops. But instead of having a complex hierarchy of ftrace_ops, the filter fields are placed in its own structure and the ftrace_ops can carefully use the same filter. This change took a bit to be able to allow for this and currently only the global_ops can share the same filter, but this new design can easily be modified to allow for any ftrace_ops to share its filter with another ftrace_ops. The first four patches deal with the change of allowing the ftrace_ops to share the filter (and this needs to go to 3.16 as well). The fifth patch fixes a bug that was also caused by the new changes but only for archs other than x86, and only if those archs implement a direct call to the function_graph tracer which they do not do yet but will in the future. It does not need to go to stable, but needs to be fixed before the other archs update their code to allow direct calls to the function_graph trampoline" * tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Use current addr when converting to nop in __ftrace_replace_code() ftrace: Fix function_profiler and function tracer together ftrace: Fix up trampoline accounting with looping on hash ops ftrace: Update all ftrace_ops for a ftrace_hash_ops update ftrace: Allow ftrace_ops to use the hashes from other ops
-
Benjamin Tissoires authored
Commit "HID: logitech: perform bounds checking on device_id early enough" unfortunately leaks some errors to dmesg which are not real ones: - if the report is not a DJ one, then there is not point in checking the device_id - the receiver (index 0) can also receive some notifications which can be safely ignored given the current implementation Move out the test regarding the report_id and also discards printing errors when the receiver got notified. Fixes: ad3e14d7 Cc: stable@vger.kernel.org Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 24 Aug, 2014 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A couple of EFI fixes, plus misc fixes all around the map" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm64: Store Runtime Services revision firmware: Do not use WARN_ON(!spin_is_locked()) x86_32, entry: Clean up sysenter_badsys declaration x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly x86/mm: Fix RCU splat from new TLB tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "A kprobes and a perf compat ioctl fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Handle compat ioctl kprobes: Skip kretprobe hit in NMI context to avoid deadlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from this week, it's been pretty quiet and nothing really stands out as particularly noteworthy here -- mostly minor fixes across the field: - ODROID booting was fixed due to PMIC interrupts missing in DT - a collection of i.MX fixes - minor Tegra fix for regulators - Rockchip fix and addition of SoC-specific mailing list to make it easier to find posted patches" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Fix warning message ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings ARM: dts: ODROID i2c improvements ARM: dts: Enable PMIC interrupts on ODROID ARM: dts: imx6sx: fix the pad setting for uart CTS_B ARM: dts: i.MX53: fix apparent bug in VPU clks ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting ARM: dts: imx6: edmqmx6: change enet reset pin ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions. ARM: imx: remove unnecessary ARCH_HAS_OPP select ARM: imx: fix TLB missing of IOMUXC base address during suspend ARM: imx6: fix SMP compilation again ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull gpio fixes from Linus Walleij: - a largeish fix for the IRQ handling in the new Zynq driver. The quite verbose commit message gives the exact details. - move some defines for gpiod flags outside an ifdef to make stub functions work again. - various minor fixes that we can accept for -rc1. * tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio-lynxpoint: enable input sensing in resume gpio: move GPIOD flags outside #ifdef gpio: delete unneeded test before of_node_put gpio: zynq: Fix IRQ handlers gpiolib: devres: use correct structure type name in sizeof MAINTAINERS: Change maintainer for gpio-bcm-kona.c
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Intel and radeon fixes. Post KS/LC git requests from i915 and radeon stacked up. They are all fixes along with some new pci ids for radeon, and one maintainers file entry. - i915: display fixes and irq fixes - radeon: pci ids, and misc gpuvm, dpm and hdp cache" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) MAINTAINERS: Add entry for Renesas DRM drivers drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe" drm/radeon: fix active_cu mask on SI and CIK after re-init (v3) drm/radeon: fix active cu count for SI and CIK drm/radeon: re-enable selective GPUVM flushing drm/radeon: Sync ME and PFP after CP semaphore waits v4 drm/radeon: fix display handling in radeon_gpu_reset drm/radeon: fix pm handling in radeon_gpu_reset drm/radeon: Only flush HDP cache for indirect buffers from userspace drm/radeon: properly document reloc priority mask drm/i915: don't try to retrain a DP link on an inactive CRTC drm/i915: make sure VDD is turned off during system suspend drm/i915: cancel hotplug and dig_port work during suspend and unload drm/i915: fix HPD IRQ reenable work cancelation drm/i915: take display port power domain in DP HPD handler drm/i915: Don't try to enable cursor from setplane when crtc is disabled drm/i915: Skip load detect when intel_crtc->new_enable==true ...
-
Benjamin LaHaise authored
As reported by Dan Aloni, commit f8567a38 ("aio: fix aio request leak when events are reaped by userspace") introduces a regression when user code attempts to perform io_submit() with more events than are available in the ring buffer. Reverting that commit would reintroduce a regression when user space event reaping is used. Fixing this bug is a bit more involved than the previous attempts to fix this regression. Since we do not have a single point at which we can count events as being reaped by user space and io_getevents(), we have to track event completion by looking at the number of events left in the event ring. So long as there are as many events in the ring buffer as there have been completion events generate, we cannot call put_reqs_available(). The code to check for this is now placed in refill_reqs_available(). A test program from Dan and modified by me for verifying this bug is available at http://www.kvack.org/~bcrl/20140824-aio_bug.c . Reported-by:
Dan Aloni <dan@kernelim.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Acked-by:
Dan Aloni <dan@kernelim.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: stable@vger.kernel.org # v3.16 and anything that f8567a38 was backported to Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pawel Moll authored
A message warning a user about wrong vc value was printing out port instead. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Geert Uytterhoeven authored
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts refers to non-existent pinmux configuration data: pinmux core: sh-pfc does not support function i2c6 sh-pfc e6060000.pfc: invalid function i2c6 in map table Remove it to fix this. Fixes: commit 1d41f36a ("ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Marcel Ziswiler authored
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: <stable@vger.kernel.org> #v3.16+ Signed-off-by:
Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner: Pinctrl that got accidentially dropped when reorganizing the dts files and addition of the new Rockchip list to MAINTAINERS. * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Liu Bo authored
This has been reported and discussed for a long time, and this hang occurs in both 3.15 and 3.16. Btrfs now migrates to use kernel workqueue, but it introduces this hang problem. Btrfs has a kind of work queued as an ordered way, which means that its ordered_func() must be processed in the way of FIFO, so it usually looks like -- normal_work_helper(arg) work = container_of(arg, struct btrfs_work, normal_work); work->func() <---- (we name it work X) for ordered_work in wq->ordered_list ordered_work->ordered_func() ordered_work->ordered_free() The hang is a rare case, first when we find free space, we get an uncached block group, then we go to read its free space cache inode for free space information, so it will file a readahead request btrfs_readpages() for page that is not in page cache __do_readpage() submit_extent_page() btrfs_submit_bio_hook() btrfs_bio_wq_end_io() submit_bio() end_workqueue_bio() <--(ret by the 1st endio) queue a work(named work Y) for the 2nd also the real endio() So the hang occurs when work Y's work_struct and work X's work_struct happens to share the same address. A bit more explanation, A,B,C -- struct btrfs_work arg -- struct work_struct kthread: worker_thread() pick up a work_struct from @worklist process_one_work(arg) worker->current_work = arg; <-- arg is A->normal_work worker->current_func(arg) normal_work_helper(arg) A = container_of(arg, struct btrfs_work, normal_work); A->func() A->ordered_func() A->ordered_free() <-- A gets freed B->ordered_func() submit_compressed_extents() find_free_extent() load_free_space_inode() ... <-- (the above readhead stack) end_workqueue_bio() btrfs_queue_work(work C) B->ordered_free() As if work A has a high priority in wq->ordered_list and there are more ordered works queued after it, such as B->ordered_func(), its memory could have been freed before normal_work_helper() returns, which means that kernel workqueue code worker_thread() still has worker->current_work pointer to be work A->normal_work's, ie. arg's address. Meanwhile, work C is allocated after work A is freed, work C->normal_work and work A->normal_work are likely to share the same address(I confirmed this with ftrace output, so I'm not just guessing, it's rare though). When another kthread picks up work C->normal_work to process, and finds our kthread is processing it(see find_worker_executing_work()), it'll think work C as a collision and skip then, which ends up nobody processing work C. So the situation is that our kthread is waiting forever on work C. Besides, there're other cases that can lead to deadlock, but the real problem is that all btrfs workqueue shares one work->func, -- normal_work_helper, so this makes each workqueue to have its own helper function, but only a wraper pf normal_work_helper. With this patch, I no long hit the above hang. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Laurent Pinchart authored
Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Dave Airlie <airlied@gmail.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
This pull just contains some new pci ids. * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id
-
- 23 Aug, 2014 5 commits
-
-
Heiko Stuebner authored
Add the new list that Rockchip-specific patches should also be directed to. Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Heiko Stuebner authored
During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner DT changes, take 2" from Maxime Ripard: Only a single patch in here that fixes a DTC warning. * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Steven Rostedt (Red Hat) authored
In __ftrace_replace_code(), when converting the call to a nop in a function it needs to compare against the "curr" (current) value of the ftrace ops, and not the "new" one. It currently does not affect x86 which is the only arch to do the trampolines with function graph tracer, but when other archs that do depend on this code implement the function graph trampoline, it can crash. Here's an example when ARM uses the trampolines (in the future): ------------[ cut here ]------------ WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4() Modules linked in: omap_rng rng_core ipv6 CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52 [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24) [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94) [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c) [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34) [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4) [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c) [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164) [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c) [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134) [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130) [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc) [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc) [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20) ---[ end trace dc9ce72c5b617d8f ]--- [ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c [ 65.054070] actual: 85:1b:00:eb Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
The latest rewrite of ftrace removed the separate ftrace_ops of the function tracer and the function graph tracer and had them share the same ftrace_ops. This simplified the accounting by removing the multiple layers of functions called, where the global_ops func would call a special list that would iterate over the other ops that were registered within it (like function and function graph), which itself was registered to the ftrace ops list of all functions currently active. If that sounds confusing, the code that implemented it was also confusing and its removal is a good thing. The problem with this change was that it assumed that the function and function graph tracer can never be used at the same time. This is mostly true, but there is an exception. That is when the function profiler uses the function graph tracer to profile. The function profiler can be activated the same time as the function tracer, and this breaks the assumption and the result is that ftrace will crash (it detects the error and shuts itself down, it does not cause a kernel oops). To solve this issue, a previous change allowed the hash tables for the functions traced by a ftrace_ops to be a pointer and let multiple ftrace_ops share the same hash. This allows the function and function_graph tracer to have separate ftrace_ops, but still share the hash, which is what is done. Now the function and function graph tracers have separate ftrace_ops again, and the function tracer can be run while the function_profile is active. Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out) Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 22 Aug, 2014 6 commits
-
-
David Jeffery authored
If a SIGKILL is sent to a task waiting in __nfs_iocounter_wait, it will busy-wait or soft lockup in its while loop. nfs_wait_bit_killable won't sleep, and the loop won't exit on the error return. Stop the busy-wait by breaking out of the loop when nfs_wait_bit_killable returns an error. Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Weston Andros Adamson authored
Commit 6094f838 "nfs: allow coalescing of subpage requests" got rid of the requirement that requests cover whole pages, but it made some incorrect assumptions. It turns out that callers of this interface can map adjacent requests (by file position as seen by req_offset + req->wb_bytes) to different pages, even when they could share a page. An example is the direct I/O interface - iov_iter_get_pages_alloc may return one segment with a partial page filled and the next segment (which is adjacent in the file position) starts with a new page. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Weston Andros Adamson authored
Adjacent requests that share the same page are allowed, but should only use one entry in the page vector. This avoids overruning the page vector - it is sized based on how many bytes there are, not by request count. This fixes issues that manifest as "Redzone overwritten" bugs (the vector overrun) and hangs waiting on page read / write, as it waits on the same page more than once. This also adds bounds checking to the page vector with a graceful failure (WARN_ON_ONCE and pgio error returned to application). Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Weston Andros Adamson authored
This handles the 'nonblock=false' case in nfs_lock_and_join_requests. If the group is already locked and blocking is allowed, drop the inode lock and wait for the group lock to be cleared before trying it all again. This should fix warnings found in peterz's tree (sched/wait branch), where might_sleep() checks are added to wait.[ch]. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Reviewed-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Weston Andros Adamson authored
This fixes handling of errors from nfs_page_group_lock in nfs_lock_and_join_requests. It now releases the inode lock and the reference to the head request. Reported-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Reviewed-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Weston Andros Adamson authored
__nfs_pageio_add_request was calling nfs_page_group_lock nonblocking, but this can return -EAGAIN which would end up passing -EIO to the application. There is no reason not to block in this path, so change the two calls to do so. Also, there is no need to check the return value of nfs_page_group_lock when nonblock=false, so remove the error handling code. Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Reviewed-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-