- 09 Dec, 2015 14 commits
-
-
David Ahern authored
[ Upstream commit e1b8d903 ] A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted that the follwoing ip command is failing with v4.3: $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154 RTNETLINK answers: Invalid argument 021dd3b8 changed the lookup of the given preferred source address to use the table id passed in, but this assumes the local entries are in the given table which is not necessarily true for non-VRF use cases. When validating the preferred source fallback to the local table on failure. Fixes: 021dd3b8 ("net: Add routes to the table associated with the device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
[ Upstream commit 4ee3bd4a ] This fixes the following lockdep warning: [ INFO: inconsistent lock state ] 4.3.0-rc7+ #1197 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a {IN-SOFTIRQ-R} state was registered at: [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0 [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4 [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116 [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5 [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465 [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633 [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15 [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e [<ffffffff8195bfef>] ip6_output+0x91/0xe5 [<ffffffff819792ae>] dst_output_sk+0x47/0x4c [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82 [<ffffffff8197981e>] mld_sendpack+0x189/0x266 [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223 [<ffffffff810de581>] call_timer_fn+0xfb/0x28c [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1 Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sabrina Dubroca authored
[ Upstream commit 2a189f9e ] In ipv6_add_dev, when addrconf_sysctl_register fails, we do not clean up the dev_snmp6 entry that we have already registered for this device. Call snmp6_unregister_dev in this case. Fixes: a317a2f1 ("ipv6: fail early when creating netdev named all or default") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 8fa677d2 ] Under low memory conditions, tcp_sk_init() and icmp_sk_init() can both iterate on all possible cpus and call inet_ctl_sock_destroy(), with eventual NULL pointer. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Habets authored
[ Upstream commit b2663a4f ] When the IP stack passes SKBs the sfc driver puts them in 2 different TX queues (called partners), one for checksummed and one for not checksummed. If the SKB has xmit_more set the driver will delay pushing the work to the NIC. When later it does decide to push the buffers this patch ensures it also pushes the partner queue, if that also has any delayed work. Before this fix the work in the partner queue would be left for a long time and cause a netdev watchdog. Fixes: 70b33fb0 ("sfc: add support for skb->xmit_more") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 4ece9009 ] sit0 device allocates its percpu storage twice : - One time in ipip6_tunnel_init() - One time in ipip6_fb_tunnel_init() Thus we leak 48 bytes per possible cpu per network namespace dismantle. ipip6_fb_tunnel_init() can be much simpler and does not return an error, and should be called after register_netdev() Note that ipip6_tunnel_clone_6rd() also needs to be called after register_netdev() (calling ipip6_tunnel_init()) Fixes: ebe084aa ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ani Sinha authored
[ Upstream commit 44f49dd8 ] Fixes the following kernel BUG : BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758 caller is __this_cpu_preempt_check+0x13/0x15 CPU: 0 PID: 2758 Comm: bash Tainted: P O 3.18.19 #2 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8 Call Trace: [<ffffffff81482b2a>] dump_stack+0x52/0x80 [<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1 [<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15 [<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c [<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e [<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810e6974>] ? pollwake+0x4d/0x51 [<ffffffff81058ac0>] ? default_wake_function+0x0/0xf [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810613d9>] ? __wake_up_common+0x45/0x77 [<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32 [<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53 [<ffffffff8139a519>] ? sock_def_readable+0x71/0x75 [<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55 [<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41 [<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86 [<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d [<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b [<ffffffff810d5738>] ? new_sync_read+0x82/0xaa [<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99 [<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32 [<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f [<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf [<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3 [<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e Signed-off-by: Ani Sinha <ani@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Phil Reid authored
[ Upstream commit e6dbe1eb ] priv->hwts_*_en indicate if timestamping is enabled/disabled at run time. But priv->dma_cap.time_stamp and priv->dma_cap.atime_stamp indicates HW is support for PTPv1/PTPv2. Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Anastasov authored
[ Upstream commit c9b3292e ] When nexthop is part of multipath route we should clear the LINKDOWN flag when link goes UP or when first address is added. This is needed because we always set LINKDOWN flag when DEAD flag was set but now on UP the nexthop is not dead anymore. Examples when LINKDOWN bit can be forgotten when no NETDEV_CHANGE is delivered: - link goes down (LINKDOWN is set), then link goes UP and device shows carrier OK but LINKDOWN remains set - last address is deleted (LINKDOWN is set), then address is added and device shows carrier OK but LINKDOWN remains set Steps to reproduce: modprobe dummy ifconfig dummy0 192.168.168.1 up here add a multipath route where one nexthop is for dummy0: ip route add 1.2.3.4 nexthop dummy0 nexthop SOME_OTHER_DEVICE ifconfig dummy0 down ifconfig dummy0 up now ip route shows nexthop that is not dead. Now set the sysctl var: echo 1 > /proc/sys/net/ipv4/conf/dummy0/ignore_routes_with_linkdown now ip route will show a dead nexthop because the forgotten RTNH_F_LINKDOWN is propagated as RTNH_F_DEAD. Fixes: 8a3d0316 ("net: track link-status of ipv4 nexthops") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Anastasov authored
[ Upstream commit 4f823def ] When fib_netdev_event calls fib_disable_ip on NETDEV_DOWN event we should not delete the local routes if the local address is still present. The confusion comes from the fact that both fib_netdev_event and fib_inetaddr_event use the NETDEV_DOWN constant. Fix it by returning back the variable 'force'. Steps to reproduce: modprobe dummy ifconfig dummy0 192.168.168.1 up ifconfig dummy0 down ip route list table local | grep dummy | grep host local 192.168.168.1 dev dummy0 proto kernel scope host src 192.168.168.1 Fixes: 8a3d0316 ("net: track link-status of ipv4 nexthops") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit 5dbebbb4 ] The EPHY on GENET v1->v3 is extremely finicky, and will show occasional failures based on the timing and reset sequence, ranging from duplicate packets, to extremely high latencies. Perform an additional software reset, and re-configuration to make sure it is in a consistent and working state. Fixes: 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Paul Maloy authored
[ Upstream commit 5cbb28a4 ] Testing of the new UDP bearer has revealed that reception of NAME_DISTRIBUTOR, LINK_PROTOCOL/RESET and LINK_PROTOCOL/ACTIVATE message buffers is not prepared for the case that those may be non-linear. We now linearize all such buffers before they are delivered up to the generic reception layer. In order for the commit to apply cleanly to 'net' and 'stable', we do the change in the function tipc_udp_recv() for now. Later, we will post a commit to 'net-next' moving the linearization to generic code, in tipc_named_rcv() and tipc_link_proto_rcv(). Fixes: commit d0f91938 ("tipc: add ip/udp media type") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
commit f504ab18 upstream. New device IDs shamelessly lifted from the vendor driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H. Nikolaus Schaller authored
commit 38850d78 upstream. Commit 8a603f91 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") unfortunately introduced a bug created but not found during discussion and patch simplification. Reported-by: Efraim Yawitz <efraim.yawitz@gmail.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Fixes: 8a603f91 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 Nov, 2015 1 commit
-
-
Linus Torvalds authored
-
- 01 Nov, 2015 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull memremap fix from Dan Williams: "The new memremap() api introduced in the 4.3 cycle to unify/replace ioremap_cache() and ioremap_wt() is mishandling the highmem case. This patch has received a build success notification from a 0day-kbuild-robot run and has received an ack from Ard" From the commit message: "The impact of this bug is low for now since the pmem driver is the only user of memremap(), but this is important to fix before more conversions to memremap arrive in 4.4" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: memremap: fix highmem support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This set of updates contains: - Another bugfix for the pathologic vm86 machinery. Clear thread.vm86 on fork to prevent corrupting the parent state. This comes along with an update to the vm86 selftest case - Fix another corner case in the ioapic setup code which causes a boot crash on some oddball systems - Fix the fallout from the dma allocation consolidation work, which leads to a NULL pointer dereference when the allocation code is called with a NULL device" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vm86: Set thread.vm86 to NULL on fork/clone selftests/x86: Add a fork() to entry_from_vm86 to catch fork bugs x86/ioapic: Prevent NULL pointer dereference in setup_ioapic_dest() x86/dma-mapping: Fix arch_dma_alloc_attrs() oops with NULL dev
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "The last round of minimalistic fixes for clocksource drivers: - Prevent multiple shutdown of the sh_mtu2 clocksource - Annotate a bunch of clocksource/schedclock functions with notrace to prevent an annoying ftrace recursion issue" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sh_mtu2: Fix multiple shutdown call issue clocksource/drivers/digicolor: Prevent ftrace recursion clocksource/drivers/fsl_ftm_timer: Prevent ftrace recursion clocksource/drivers/vf_pit_timer: Prevent ftrace recursion clocksource/drivers/prima2: Prevent ftrace recursion clocksource/drivers/samsung_pwm_timer: Prevent ftrace recursion clocksource/drivers/pistachio: Prevent ftrace recursion clocksource/drivers/arm_global_timer: Prevent ftrace recursion
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "The last two one-liners for 4.3 from the irqchip space: - Regression fix for armada SoC which addresses the fallout from the set_irq_flags() cleanup - Add the missing propagation of the irq_set_type() callback to the parent interrupt controller of the tegra interrupt chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/tegra: Propagate IRQ type setting to parent irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "This should be our final batch of fixes for 4.3: - A patch from Sudeep Holla that fixes annotation of wakeup sources properly, old unused format seems to have spread through copying. - Two patches from Tony for OMAP. One dealing with MUSB setup problems due to runtime PM being enabled too early on the parent device. The other fixes IRQ numbering for OMAP1" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: usb: musb: omap2430: Fix regression caused by driver core change ARM: OMAP1: fix incorrect INT_DMA_LCD ARM: dts: fix gpio-keys wakeup-source property
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is three essential bug fixes for various SCSI parts. The only affected users are SCSI multi-path via device handler (basically all the enterprise) and mvsas users. The dh bugs are an async entanglement in boot resulting in a serious WARN_ON trip and a use after free on remove leading to a crash with strict memory accounting. The mvsas bug manifests as a null deref oops but only on abort sequences; however, these can commonly occur with SATA attached devices, hence the fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi_dh: don't try to load a device handler during async probing scsi_dh: fix use-after-free when removing scsi device mvsas: Fix NULL pointer dereference in mvs_slot_task_free
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md bug fixes from Neil Brown: "Two more bug fixes for md. One bugfix for a list corruption in raid5 because of incorrect locking. Other for possible data corruption when a recovering device is failed, removed, and re-added. Both tagged for -stable" * tag 'md/4.3-rc7-fixes' of git://neil.brown.name/md: Revert "md: allow a partially recovered device to be hot-added to an array." md/raid5: fix locking in handle_stripe_clean_event()
-
- 31 Oct, 2015 12 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Two drm atomic core fixes. And two radeon patches needed to fix a backlight regression on some older hardware" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Correct arguments to list_tail_add in create blob ioctl drm: crtc: integer overflow in drm_property_create_blob() drm/radeon: fix dpms when driver backlight control is disabled drm/radeon: move bl encoder assignment into bl init
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fix from Sage Weil: "This sets the stable pages flag on the RBD block device when we have CRCs enabled. (This is necessary since the default assumption for block devices changed in 3.9)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: require stable pages if message data CRCs are enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs bug fixes from Miklos Szeredi: "This contains fixes for bugs that appeared in earlier kernels (all are marked for -stable)" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: free lower_mnt array in ovl_put_super ovl: free stack of paths in ovl_fill_super ovl: fix open in stacked overlay ovl: fix dentry reference leak ovl: use O_LARGEFILE in ovl_copy_up()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix two regressions in ipv6 route lookups, particularly wrt output interface specifications in the lookup key. From David Ahern. 2) Fix checks in ipv6 IPSEC tunnel pre-encap fragmentation, from Herbert Xu. 3) Fix mis-advertisement of 1000BASE-T on bcm63xx_enet, from Simon Arlott. 4) Some smsc phys misbehave with energy detect mode enabled, so add a DT property and disable it on such switches. From Heiko Schocher. 5) Fix TSO corruption on TX in mv643xx_eth, from Philipp Kirchhofer. 6) Fix regression added by removal of openvswitch vport stats, from James Morse. 7) Vendor Kconfig options should be bool, not tristate, from Andreas Schwab. 8) Use non-_BH() net stats bump in tcp_xmit_probe_skb(), otherwise we barf during TCP REPAIR operations. 9) Fix various bugs in openvswitch conntrack support, from Joe Stringer. 10) Fix NETLINK_LIST_MEMBERSHIPS locking, from David Herrmann. 11) Don't have VSOCK do sock_put() in interrupt context, from Jorgen Hansen. 12) Fix skb_realloc_headroom() failures properly in ISDN, from Karsten Keil. 13) Add some device IDs to qmi_wwan, from Bjorn Mork. 14) Fix ovs egress tunnel information when using lwtunnel devices, from Pravin B Shelar. 15) Add missing NETIF_F_FRAGLIST to macvtab feature list, from Jason Wang. 16) Fix incorrect handling of throw routes when the result of the throw cannot find a match, from Xin Long. 17) Protect ipv6 MTU calculations from wrap-around, from Hannes Frederic Sowa. 18) Fix failed autonegotiation on KSZ9031 micrel PHYs, from Nathan Sullivan. 19) Add missing memory barries in descriptor accesses or xgbe driver, from Thomas Lendacky. 20) Fix release conditon test in pppoe_release(), from Guillaume Nault. 21) Fix gianfar bugs wrt filter configuration, from Claudiu Manoil. 22) Fix violations of RX buffer alignment in sh_eth driver, from Sergei Shtylyov. 23) Fixing missing of_node_put() calls in various places around the networking, from Julia Lawall. 24) Fix incorrect leaf now walking in ipv4 routing tree, from Alexander Duyck. 25) RDS doesn't check pskb_pull()/pskb_trim() return values, from Sowmini Varadhan. 26) Fix VLAN configuration in mlx4 driver, from Jack Morgenstein. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) ipv6: protect mtu calculation of wrap-around and infinite loop by rounding issues Revert "Merge branch 'ipv6-overflow-arith'" net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes net/mlx4_en: Explicitly set no vlan tags in WQE ctrl segment when no vlan is present vhost: fix performance on LE hosts bpf: sample: define aarch64 specific registers amd-xgbe: Fix race between access of desc and desc index RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv forcedeth: fix unilateral interrupt disabling in netpoll path openvswitch: Fix skb leak using IPv6 defrag ipv6: Export nf_ct_frag6_consume_orig() openvswitch: Fix double-free on ip_defrag() errors fib_trie: leaf_walk_rcu should not compute key if key is less than pn->key net: mv643xx_eth: add missing of_node_put ath6kl: add missing of_node_put net: phy: mdio: add missing of_node_put netdev/phy: add missing of_node_put net: netcp: add missing of_node_put net: thunderx: add missing of_node_put ipv6: gre: support SIT encapsulation ...
-
Andy Lutomirski authored
thread.vm86 points to per-task information -- the pointer should not be copied on clone. Fixes: d4ce0f26 ("x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'") Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Stas Sergeev <stsp@list.ru> Link: http://lkml.kernel.org/r/71c5d6985d70ec8197c8d72f003823c81b7dcf99.1446270067.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Andy Lutomirski authored
Mere possession of vm86 state is strange. Make sure that nothing gets corrupted if we fork after calling vm86(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Stas Sergeev <stsp@list.ru> Link: http://lkml.kernel.org/r/08f83295460a80e41dc5e3e81ec40d6844d316f5.1446270067.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer fixes from Dmitry Torokhov: - a change to the ALPS driver where we had limit the quirk for trackstick handling from being active on all Dells to just a few models - a fix for a build dependency issue in the sur40 driver - a small clock handling fixup in the LPC32xx touchscreen driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits Input: sur40 - add dependency on VIDEO_V4L2 Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Sorry for this last-minute update; it's been in -next for quite a while, but I forgot about it until I started getting ready for the merge window. It's small and fixes a way a user could cause a panic via sysfs, so I think it's worth getting it in v4.3. NUMA: - Prevent out of bounds access in sysfs numa_node override (Sasha Levin)" * tag 'pci-v4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Prevent out of bounds access in numa_node override
-
Olof Johansson authored
Merge tag 'omap-for-v4.3/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two omap regression fixes: - Fix omap3 MUSB with DMA caused by driver core changes - Fix LCD DMA interrupt number for omap1 that did not get changed for sparse IRQ changes * tag 'omap-for-v4.3/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: usb: musb: omap2430: Fix regression caused by driver core change ARM: OMAP1: fix incorrect INT_DMA_LCD Signed-off-by: Olof Johansson <olof@lixom.net>
-
Maneet Singh authored
Arguments passed to list_add_tail were reversed resulting in deletion of old blob property everytime the new one is added. Fixes commit e2f5d2ea Author: Daniel Stone <daniels@collabora.com> Date: Fri May 22 13:34:51 2015 +0100 drm/mode: Add user blob-creation ioctl Signed-off-by: Maneet Singh <mmaneetsingh@nvidia.com> [seanpaul tweaked commit subject a little] Signed-off-by: Sean Paul <seanpaul@chromium.org> Cc: stable@kernel.org # v4.2 Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
-
NeilBrown authored
This reverts commit 7eb41885. This commit is poorly justified, I can find not discusison in email, and it clearly causes a problem. If a device which is being recovered fails and is subsequently re-added to an array, there could easily have been changes to the array *before* the point where the recovery was up to. So the recovery must start again from the beginning. If a spare is being recovered and fails, then when it is re-added we really should do a bitmap-based recovery up to the recovery-offset, and then a full recovery from there. Before this reversion, we only did the "full recovery from there" which is not corect. After this reversion with will do a full recovery from the start, which is safer but not ideal. It will be left to a future patch to arrange the two different styles of recovery. Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: NeilBrown <neilb@suse.com> Cc: stable@vger.kernel.org (3.14+) Fixes: 7eb41885 ("md: allow a partially recovered device to be hot-added to an array.")
-
Dan Carpenter authored
The size here comes from the user via the ioctl, it is a number between 1-u32max so the addition here could overflow on 32 bit systems. Fixes: f453ba04 ('DRM: add mode setting support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Cc: stable@kernel.org # v4.2 Signed-off-by: Dave Airlie <airlied@gmail.com>
-
- 30 Oct, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Apologies for this being so late, but we've uncovered a few nasty issues on arm64 which didn't settle down until yesterday and the fixes all look suitable for 4.3. Of the four patches, three of them are Cc'd to stable, with the remaining patch fixing an issue that only took effect during the merge window. Summary: - Fix corruption in SWP emulation when STXR fails due to contention - Fix MMU re-initialisation when resuming from a low-power state - Fix stack unwinding code to match what ftrace expects - Fix relocation code in the EFI stub when DRAM base is not 2MB aligned" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: do not assume DRAM base is aligned to 2 MB Revert "ARM64: unwind: Fix PC calculation" arm64: kernel: fix tcr_el1.t0sz restore on systems with extended idmap arm64: compat: fix stxr failure case in SWP emulation
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 kcmp syscall from Tony Luck: "Missed adding the kcmp() syscall a long time ago. Now it seems that it is essential to build systemd" * tag 'please-pull-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Wire up kcmp syscall
-
Roman Gushchin authored
After commit 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done neilb: original was against a 3.x kernel. I forward-ported to 4.3-rc. This verison is suitable for any kernel since Commit: 59fc630b ("RAID5: batch adjacent full stripe write") (v4.1+). I'll post a version for earlier kernels to stable. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by: NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> Cc: <stable@vger.kernel.org> # 3.13 - 4.2
-
Ronny Hegewald authored
rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Cc: stable@vger.kernel.org # 3.9+, needs backporting Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
- 29 Oct, 2015 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
regression fix for backlight on old laptops. * 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dpms when driver backlight control is disabled drm/radeon: move bl encoder assignment into bl init
-
Ard Biesheuvel authored
The current arm64 Image relocation code in the UEFI stub assumes that the dram_base argument it receives is always a multiple of 2 MB. In reality, it is simply the lowest start address of all RAM entries in the UEFI memory map, which means it could be any multiple of 4 KB. Since the arm64 kernel Image needs to reside TEXT_OFFSET bytes beyond a 2 MB aligned base, or it will fail to boot, make sure we round dram_base to 2 MB before using it to calculate the relocation address. Fixes: e38457c3 ("arm64: efi: prefer AllocatePages() over efi_low_alloc() for vmlinux") Reported-by: Timur Tabi <timur@codeaurora.org> Tested-by: Timur Tabi <timur@codeaurora.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
-