Make sure v4l2_device_unregister_subdev() is called for both:
oif and sensor subdev and both media entities are freed on
driver removal.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

index variable is used to check the validity of the data by
testing for negative values. Hence make it signed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

If fimc->drv_data is NULL, then fimc->drv_data->num_entities would
cause NULL pointer dereferencing. Hence remove it from print statement.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This avoids:
Apr 12 23:52:16 homeserver kernel: imon:send_packet: task interrupted
Apr 12 23:52:16 homeserver kernel: ------------[ cut here ]------------
Apr 12 23:52:16 homeserver kernel: WARNING: at drivers/usb/core/urb.c:327 usb_submit_urb+0x353/0x370()
Apr 12 23:52:16 homeserver kernel: Hardware name: Unknow
Apr 12 23:52:16 homeserver kernel: URB f64b6f00 submitted while active
Apr 12 23:52:16 homeserver kernel: Modules linked in:
Apr 12 23:52:16 homeserver kernel: Pid: 3154, comm: LCDd Not tainted 3.8.6-htpc-00005-g9e6fc5e #26
Apr 12 23:52:16 homeserver kernel: Call Trace:
Apr 12 23:52:16 homeserver kernel: [<c012d778>] ? warn_slowpath_common+0x78/0xb0
Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370
Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370
Apr 12 23:52:16 homeserver kernel: [<c0447010>] ? imon_ir_change_protocol+0x150/0x150
Apr 12 23:52:16 homeserver kernel: [<c012d843>] ? warn_slowpath_fmt+0x33/0x40
Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370
Apr 12 23:52:16 homeserver kernel: [<c0446c67>] ? send_packet+0x97/0x270
Apr 12 23:52:16 homeserver kernel: [<c0446cfe>] ? send_packet+0x12e/0x270
Apr 12 23:52:16 homeserver kernel: [<c05c5743>] ? do_nanosleep+0xa3/0xd0
Apr 12 23:52:16 homeserver kernel: [<c044760e>] ? vfd_write+0xae/0x250
Apr 12 23:52:16 homeserver kernel: [<c0447560>] ? lcd_write+0x180/0x180
Apr 12 23:52:16 homeserver kernel: [<c01b2b19>] ? vfs_write+0x89/0x140
Apr 12 23:52:16 homeserver kernel: [<c01b2dda>] ? sys_write+0x4a/0x90
Apr 12 23:52:16 homeserver kernel: [<c05c7c45>] ? sysenter_do_call+0x12/0x26
Apr 12 23:52:16 homeserver kernel: ---[ end trace a0b6f0fcfd2f9a1d ]---
Apr 12 23:52:16 homeserver kernel: imon:send_packet: error submitting urb(-16)
Apr 12 23:52:16 homeserver kernel: imon:vfd_write: send packet #3 failed
Apr 12 23:52:16 homeserver kernel: imon:send_packet: error submitting urb(-16)
Apr 12 23:52:16 homeserver kernel: imon:vfd_write: send packet #0 failed
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This bug could be triggered if 1st interface configuration fails:
Apr  8 18:20:30 homeserver kernel: usb 5-1: new low-speed USB device number 2 using ohci_hcd
Apr  8 18:20:30 homeserver kernel: input: iMON Panel, Knob and Mouse(15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2
Apr  8 18:20:30 homeserver kernel: Registered IR keymap rc-imon-pad
Apr  8 18:20:30 homeserver kernel: input: iMON Remote (15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/rc/rc0/input3
Apr  8 18:20:30 homeserver kernel: rc0: iMON Remote (15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/rc/rc0
Apr  8 18:20:30 homeserver kernel: imon:send_packet: packet tx failed (-32)
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: remote input dev register failed
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: imon_init_intf0: rc device setup failed
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: unable to initialize intf0, err 0
Apr  8 18:20:30 homeserver kernel: imon:imon_probe: failed to initialize context!
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: unable to register, err -19
Apr  8 18:20:30 homeserver kernel: BUG: unable to handle kernel NULL pointer dereference at 00000014
Apr  8 18:20:30 homeserver kernel: IP: [<c05c4e4c>] mutex_lock+0xc/0x30
Apr  8 18:20:30 homeserver kernel: *pde = 00000000
Apr  8 18:20:30 homeserver kernel: Oops: 0002 [#1] PREEMPT SMP
Apr  8 18:20:30 homeserver kernel: Modules linked in:
Apr  8 18:20:30 homeserver kernel: Pid: 367, comm: khubd Not tainted 3.8.3-htpc-00002-g79b1403 #23 Unknow Unknow/RS780-SB700
Apr  8 18:20:30 homeserver kernel: EIP: 0060:[<c05c4e4c>] EFLAGS: 00010296 CPU: 1
Apr  8 18:20:30 homeserver kernel: EIP is at mutex_lock+0xc/0x30
Apr  8 18:20:30 homeserver kernel: EAX: 00000014 EBX: 00000014 ECX: 00000000 EDX: f590e480
Apr  8 18:20:30 homeserver kernel: ESI: f5deac00 EDI: f590e480 EBP: f5f3ee00 ESP: f6577c28
Apr  8 18:20:30 homeserver kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Apr  8 18:20:30 homeserver kernel: CR0: 8005003b CR2: 00000014 CR3: 0081b000 CR4: 000007d0
Apr  8 18:20:30 homeserver kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
Apr  8 18:20:30 homeserver kernel: DR6: ffff0ff0 DR7: 00000400
Apr  8 18:20:30 homeserver kernel: Process khubd (pid: 367, ti=f6576000 task=f649ea00 task.ti=f6576000)
Apr  8 18:20:30 homeserver kernel: Stack:
Apr  8 18:20:30 homeserver kernel: 00000000 f5deac00 c0448de4 f59714c0 f5deac64 c03b8ad2 f6577c90 00000004
Apr  8 18:20:30 homeserver kernel: f649ea00 c0205142 f6779820 a1ff7f08 f5deac00 00000001 f5f3ee1c 00000014
Apr  8 18:20:30 homeserver kernel: 00000004 00000202 15c20036 c07a03e8 fffee0ca f6795c00 f5f3ee1c f5deac00
Apr  8 18:20:30 homeserver kernel: Call Trace:
Apr  8 18:20:30 homeserver kernel: [<c0448de4>] ? imon_probe+0x494/0xde0
Apr  8 18:20:30 homeserver kernel: [<c03b8ad2>] ? rpm_resume+0xb2/0x4f0
Apr  8 18:20:30 homeserver kernel: [<c0205142>] ? sysfs_addrm_finish+0x12/0x90
Apr  8 18:20:30 homeserver kernel: [<c04170e9>] ? usb_probe_interface+0x169/0x240
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b0a94>] ? driver_probe_device+0x54/0x1e0
Apr  8 18:20:30 homeserver kernel: [<c0416abe>] ? usb_device_match+0x4e/0x80
Apr  8 18:20:30 homeserver kernel: [<c03af314>] ? bus_for_each_drv+0x34/0x70
Apr  8 18:20:30 homeserver kernel: [<c03b0a0b>] ? device_attach+0x7b/0x90
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b00ff>] ? bus_probe_device+0x5f/0x80
Apr  8 18:20:30 homeserver kernel: [<c03aeab7>] ? device_add+0x567/0x610
Apr  8 18:20:30 homeserver kernel: [<c041a7bc>] ? usb_create_ep_devs+0x7c/0xd0
Apr  8 18:20:30 homeserver kernel: [<c0413837>] ? create_intf_ep_devs+0x47/0x70
Apr  8 18:20:30 homeserver kernel: [<c04156c4>] ? usb_set_configuration+0x454/0x750
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c041de8a>] ? generic_probe+0x2a/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c0205aff>] ? sysfs_create_link+0xf/0x20
Apr  8 18:20:30 homeserver kernel: [<c04171db>] ? usb_probe_device+0x1b/0x40
Apr  8 18:20:30 homeserver kernel: [<c03b0a94>] ? driver_probe_device+0x54/0x1e0
Apr  8 18:20:30 homeserver kernel: [<c03af314>] ? bus_for_each_drv+0x34/0x70
Apr  8 18:20:30 homeserver kernel: [<c03b0a0b>] ? device_attach+0x7b/0x90
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b00ff>] ? bus_probe_device+0x5f/0x80
Apr  8 18:20:30 homeserver kernel: [<c03aeab7>] ? device_add+0x567/0x610
Apr  8 18:20:30 homeserver kernel: [<c040e6df>] ? usb_new_device+0x12f/0x1e0
Apr  8 18:20:30 homeserver kernel: [<c040f4d8>] ? hub_thread+0x458/0x1230
Apr  8 18:20:30 homeserver kernel: [<c015554f>] ? dequeue_task_fair+0x9f/0xc0
Apr  8 18:20:30 homeserver kernel: [<c0131312>] ? release_task+0x1d2/0x330
Apr  8 18:20:30 homeserver kernel: [<c01477b0>] ? abort_exclusive_wait+0x90/0x90
Apr  8 18:20:30 homeserver kernel: [<c040f080>] ? usb_remote_wakeup+0x40/0x40
Apr  8 18:20:30 homeserver kernel: [<c0146ed2>] ? kthread+0x92/0xa0
Apr  8 18:20:30 homeserver kernel: [<c05c7877>] ? ret_from_kernel_thread+0x1b/0x28
Apr  8 18:20:30 homeserver kernel: [<c0146e40>] ? kthread_freezable_should_stop+0x50/0x50
Apr  8 18:20:30 homeserver kernel: Code: 89 04 24 89 f0 e8 05 ff ff ff 8b 5c 24 24 8b 74 24 28 8b 7c 24 2c 8b 6c 24 30 83 c4 34 c3 00 83 ec 08 89 1c 24 89 74 24 04 89 c3 <f0> ff 08 79 05 e8 ca 03 00 00 64 a1 70 d6 80 c0 8b 74 24 04 89
Apr  8 18:20:30 homeserver kernel: EIP: [<c05c4e4c>] mutex_lock+0xc/0x30 SS:ESP 0068:f6577c28
Apr  8 18:20:30 homeserver kernel: CR2: 0000000000000014
Apr  8 18:20:30 homeserver kernel: ---[ end trace df134132c967205c ]---
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

send_packet() is used during initialization, before send_packet_delay
is set. So, move ictx->send_packet_delay to happen earlier.

[mchehab@redhat.com: fold two patches into one to make git history clearer]
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The last part of the "u_ent.name" buffer isn't cleared so it still has
uninitialized stack memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The intend of this patch is to improve the support of the dib7090 and
dib7790. The AGC1 min value is set to 32768 by default. The actual AGC1 min
and the external attenuation are controled depending on the received RF
level.
Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The intend of this patch is to remove the support for the dib7090E. The
DiB7090E-package has never left prototype state and never made it to
mass-prod-state.
Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The intend of this patch is to improve the support of the dib8096. The PLL
parameters are not automatically computed. The limit to set/unset external
diode for attenuation has been updated. The TFE8096P board is using the
new I2C API.
Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The intend of this patch is to improve the support of the dib0090 tuner.
The ramp tables have been updated. Also some minor enhancements has been
added (EFUSE and reset).
Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The intend of this patch is to improve the support of the dib7000p. It is
now possible to set the minimum value for the AGC1. Also, the driver takes
into account the frequency offset introduced in the tuned frequency.
Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The intend of this patch is to improve the support of the dib8000.
Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

commit 61ff5d69 "em28xx: improve em2710/em2820 distinction" missed the
le16_to_cpu conversion of the USB vendor ID.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The 6010 produces MPEG-4 part 2, while 6110 produces H.264.
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Because they're signed, "is_video" and "is_audio" can be 0 and -1
instead of 0 and 1 as intended.  It doesn't cause a bug, but it makes
Sparse complain:
drivers/staging/media/go7007/go7007-priv.h:94:31: error: dubious one-bit signed bitfield
drivers/staging/media/go7007/go7007-priv.h:95:31: error: dubious one-bit signed bitfield
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Legacy PCI suspend-resume handlers are called with interrupts enabled.

But cx8800_suspend/cx8800_resume and
cx8802_suspend_common/cx8802_resume_common use spin_lock/spin_unlock
functions to acquire dev->slock, while the same lock is acquired in the
corresponding irq-handlers: cx8800_irq and cx8802_irq.

That means a deadlock is possible if an interrupt happens while suspend
or resume owns the lock. The patch replaces spin_lock/spin_unlock with
spin_lock_irqsave/spin_unlock_irqrestore.

Found by Linux Driver Verification project (linuxtesting.org).

[mchehab@redhat.com: Fix CodingStyle]
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Sparse complains that these are "dubious one-bit signed bitfields" and
the comment says it was intended to be 1 and 0 instead of -1 and 0.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Currently modular V4L2 build with enabled OF is broken dur to the
of_get_next_parent() function being unavailable to modules. Export it to
fix the build.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

As requested by Samuel Ortiz <sameo@linux.intel.com>, revert
this patch.

This reverts commit 3f8ec5df.

Conflicts:
	drivers/mfd/Kconfig
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

As requested by Andrey Smirnov <andrew.smirnov@gmail.com>, revert
this patch.

This reverts commit 30bac911.

Conflicts:
	drivers/media/radio/Kconfig
	drivers/media/radio/radio-si476x.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

From Fengguang Wu <fengguang.wu@intel.com>:

> drivers/media/pci/sta2x11/sta2x11_vip.c: In function 'sta2x11_vip_init_one':
> drivers/media/pci/sta2x11/sta2x11_vip.c:1314:2: error: implicit declaration of function 'i2c_get_adapter' [-Werror=implicit-function-declaration]
> drivers/media/pci/sta2x11/sta2x11_vip.c:1314:15: warning: assignment makes pointer from integer without a cast [enabled by default]
> drivers/media/pci/sta2x11/sta2x11_vip.c:1330:2: error: implicit declaration of function 'i2c_put_adapter' [-Werror=implicit-function-declaration]

And also:

> warning: (STA2X11_VIP) selects VIDEO_ADV7180 which has unmet direct dependencies (MEDIA_SUPPORT && VIDEO_V4L2 && I2C)
> drivers/media/i2c/adv7180.c: In function '__adv7180_status':
> drivers/media/i2c/adv7180.c:194:2: error: implicit declaration of function 'i2c_smbus_read_byte_data' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c: In function 'adv7180_s_routing':
> drivers/media/i2c/adv7180.c:251:2: error: implicit declaration of function 'i2c_smbus_write_byte_data' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c: In function 'adv7180_probe':
> drivers/media/i2c/adv7180.c:551:2: error: implicit declaration of function 'i2c_check_functionality' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c:554:2: error: implicit declaration of function 'i2c_adapter_id' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c: At top level:
> drivers/media/i2c/adv7180.c:663:1: warning: data definition has no type or storage class [enabled by default]
> drivers/media/i2c/adv7180.c:663:1: warning: type defaults to 'int' in declaration of 'module_i2c_driver' [-Wimplicit-int]
> drivers/media/i2c/adv7180.c:663:1: warning: parameter names (without types) in function declaration [enabled by default]
> drivers/media/i2c/adv7180.c:649:26: warning: 'adv7180_driver' defined but not used [-Wunused-variable]

This is due to the lack of I2C support:

...
> CONFIG_I2C is not set
...

So, Make sure that sta2x11_vip depends on I2C.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

There are three drivers with *it913x name on it, and they all
belong to the same device:
	a tuner, at it913x.c;
	a frontend: it913x-fe.c;
	a bridge: it913x.c, renamed to dvb_usb_it913x by the
building system.

This is confusing. Even more confusing are the two .c files with
the same name under different directories, with different contents
and different functions. So, prepend the tuner one.

This also breaks the out-of-tree compilation system.
Reported-by: Frederic Fays <frederic.fays@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Fix mceusb_cmdsize() which returns incorrect datasize=0 for
sub-commands MCE_RSP_GETPORTSTATUS, MCE_RSP_GETWAKESOURCE,
MCE_RSP_EQDEVDETAILS, MCE_RSP_EQEMVER, and MCE_RSP_EQIRNUMPORTS.

While here, change mceusb_cmdsize() name to reflect that it returns
data size not cmd size.
Signed-off-by: William Steidtmann <billstei@hbci.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Don't print proc_dir_entry data in debug as we're soon to have no direct
access to the contents of the PDE.  Print what was put in there instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

VIDEO_GO7007 uses usb interfaces so it should depend on USB.
It also selects CYPRESS_FIRMWARE, which depends on USB.
Fixes build errors and a kconfig warning:
go7007-loader.c:(.text+0xcc7d0): undefined reference to `usb_get_dev'
go7007-loader.c:(.init.text+0x49f0): undefined reference to `usb_register_driver'
go7007-loader.c:(.exit.text+0x17ce): undefined reference to `usb_deregister'
warning: (DVB_USB_AZ6007 && VIDEO_GO7007) selects CYPRESS_FIRMWARE which has unmet direct dependencies (MEDIA_SUPPORT && USB)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Commit cd634f1b ("[media] v4l2: put VIDIOC_DBG_G_CHIP_NAME under
ADV_DEBUG") missed the initializer of radio_ioctl_ops:
drivers/media/usb/em28xx/em28xx-video.c:1830:2: error: unknown field 'vidioc_g_chip_info' specified in initializer
drivers/media/usb/em28xx/em28xx-video.c:1830:26: error: 'vidioc_g_chip_info' undeclared here (not in a function)
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb-frontends/cxd2820r_t2.c: In function 'cxd2820r_set_frontend_t2':
drivers/media/dvb-frontends/cxd2820r_t2.c:128:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

As of now TI has no maintainer/supporter for davinci media
drivers, Until it has any I'll be maintaining it.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Map RC_MAP_REDDO to that device.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

It is very similar than rc-msi-digivox-iii but new keytable is needed
as there is one existing scancode mapped to different button. Also that
one has less buttons.
NEC extended protocol with address 0x61d6.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The length of mmap() can be bigger than length of vb2 buffer, so
it should be checked.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Driver author has disappeared, even mails are bouncing back.
I will keep care with that as I have done for a while.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

I have the hardware and I have already made almost all changes what
are needed during the recent few years, so lets mark it as maintained.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>