- 19 Sep, 2022 40 commits
-
-
Charlene Liu authored
[why] Expose few dchubbun functions in dcn31 and dcn32 to leverage. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Pavle Kotarac authored
[WHY] New dcn301 has 2 less phys Reviewed-by:
Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by:
-
Pavle Kotarac authored
[WHY] Adding new asic id for dcn301 Reviewed-by:
-
Sherry Wang authored
[Why] Hostvm should be enabled/disabled accordding to the status of riommu_active, but hostvm always be disabled on DCN31 which causes underflow [How] Set correct hostvm flag on DCN31 Reviewed-by:
Sherry Wang <Yao.Wang1@amd.com> Tested-by:
-
George Shen authored
[Why] The urgent latency override is useful when debugging issues relating to underflow. Current overridden variable is not correct and has no effect on DCN3.2 and DCN3.21 DML calculations. [How] For DCN3.2 and DCN3.21, override the correct urgent latency variable when bounding box override is present. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
George Shen <george.shen@amd.com> Tested-by:
-
Alvin Lee authored
[Why & How] Uncomment SubVP pipe split assignment in driver since FW headers are now promoted Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
zhikzhai authored
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by:
zhikzhai <zhikai.zhai@amd.com> Tested-by:
-
Hugo Hu authored
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by:
Hugo Hu <hugo.hu@amd.com> Tested-by:
-
Ian Chen authored
[Why & How] Move extra panel power sequencer settings into panel_cofig struct. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Ian Chen <ian.chen@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following fixes: - Port DCN30 420 logic to DCN32 - Remove some unused definitions from DCN32/321 - Remove dp dig pixle rate div policy from dcn314 - Fix dcn315 reading of memory channel count and width - Fix SubVP and ODM relevant issues - Fix pipe split, MPO and ODM relevant issues - Support proper mst payload removal when link is not in mst mode in dc - Assume an LTTPR is always present on fixed_vs links - Rework recent update PHY state commit - Add debug option and logs Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Anthony Koo authored
- Handle pipe split case for SubVP: Pass in pipe split index for main and phantom pipes Reviewed-by:
-
Alvin Lee authored
[Why and How] - Don't skip bottom and next odm pipe when calculating num ways for subvp - Don't need to double cache lines for DCC (divide by 256) Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Alvin Lee authored
[Why and How] - For driver disable cases in current implementation, if P-State is unsupported or still supported by firmware, we force it supported by DCN. - SubVP now needs to be included in this case along with FPO. Reviewed-by:
-
Alvin Lee authored
[Why and How] For SubVP pipe split case, pass in split index for main and phantom pipes to ensure that the P-State sequence will force P-State for all required pipes. Reviewed-by:
-
Alvin Lee authored
[Why and How] - Add a debug option for allocating extra way for cursor - Remove usage of cache_cursor_addr since it's not gaurenteed to be populated - Include cursor size in MALL calculation if it exceeds the DCN cursor buffer size (and don't need extra way for cursor) Reviewed-by:
Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by:
-
Alvin Lee authored
[Why & How] ODM seamless transitions require DIV_MODE_AUTO. However, DIV_MODE_AUTO only works when all the horizontal timing params are divisible by the ODM combine factor. Therefore, disable the ODM 2:1 policy when the horizontal timing params are not divisible by 2. Reviewed-by:
-
Wenjing Liu authored
[why] When user unplugs mst hubs, the current code will forcefully zero entire mst payload allocation table structure stored in link before we deallocate actual payload when disabling stream. During the first disable stream sequence, we will use current mst payload allocation table to determine if link should be turned off. Because we zero out it before we are disabling stream, the payload allocation table stored in link doesn't represent the actual allocation status, so we turn off link at the first disable stream without waiting until all streams' payloads have been deallocated. This avoilates the designed deallocation sequence and caused system hang in DP2 scenario. [how] Remove payload during deallocation and never zero payload allocation structure without actually deallocating payload. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Original change 594b237b ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b ("drm/amd/display: Add interface to track PHY state") Reviewed-by:
-
Yifan Zhang authored
This patch addes MES and MES-KIQ version in debugfs. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Tim Huang <Tim.Huang@amd.com> Acked-by:
-
Michael Strauss authored
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Dmytro Laktyushkin authored
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by:
-
Leo Li authored
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Tested-by:
-
Alvin Lee authored
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by:
-
Leo Chen authored
[Why & How] Added logs for panel delays, spread_spectrum_percentage, and gpuclk_ss_percentage to facilitate debugging. Reviewed-by:
Leo Chen <sancchen@amd.com> Tested-by:
-
Charlene Liu authored
[Why & How] Support dramclk change latency change via debug option and add some code isolation. Reviewed-by:
-
Alvin Lee authored
[Why & How] - Pipe split prediction previously only took into account MPC split. We must also consider when ODM combine is required, and when we apply ODM combine by policy. - Also re-work DET allocation function as it wasn't properly splitting the DET per stream, per plane. Reviewed-by:
-
Aurabindo Pillai authored
[Why&How] After reg offset initialization was switched to runtime rather than compile time, some of the defintions are not needed anymore and can be removed. Acked-by:
-
Chris Park authored
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2182Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2181Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2180Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2179Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2178Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2177Reported-by:
-
Colin Ian King authored
There is a spelling mistake in a pr_debug message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Hawking Zhang authored
amdgpu_firmware_info debugfs will show rlcv/rlcp ucode version info Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Hawking Zhang authored
To support query rlcp and rlcv firmware version from existing AMDGPU_INFO_FW_VERSION interface Signed-off-by:
-
Hawking Zhang authored
add rlc v2_x support to print_rlc_hdr helper Signed-off-by:
-
Hawking Zhang authored
cache rlcv/rlcvp ucode version info in amdgpu_gfx structure Signed-off-by:
-
Shiwu Zhang authored
To remove duplication for GFX11 as well, use the common MQD manager functions defined in kfd_mqd_manager.c for all version of managers Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
