- 30 Apr, 2016 40 commits
-
-
subashab@codeaurora.org authored
[ Upstream commit 071d36bf ] A crash is observed when a decrypted packet is processed in receive path. get_rps_cpus() tries to dereference the skb->dev fields but it appears that the device is freed from the poison pattern. [<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0 [<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc [<ffffffc000af6094>] netif_rx+0x74/0x94 [<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0 [<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c [<ffffffc000ba6eb8>] esp_input_done+0x20/0x30 [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 [<ffffffc0000bb40c>] kthread+0xe0/0xec -013|get_rps_cpu( | dev = 0xFFFFFFC08B688000, | skb = 0xFFFFFFC0C76AAC00 -> ( | dev = 0xFFFFFFC08B688000 -> ( | name = "...................................................... | name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev = 0xAAAAAAAAAAA Following are the sequence of events observed - - Encrypted packet in receive path from netdevice is queued - Encrypted packet queued for decryption (asynchronous) - Netdevice brought down and freed - Packet is decrypted and returned through callback in esp_input_done - Packet is queued again for process in network stack using netif_rx Since the device appears to have been freed, the dereference of skb->dev in get_rps_cpus() leads to an unhandled page fault exception. Fix this by holding on to device reference when queueing packets asynchronously and releasing the reference on call back return. v2: Make the change generic to xfrm as mentioned by Steffen and update the title to xfrm Suggested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Jerome Stanislaus <jeromes@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Manish Chopra authored
[ Upstream commit 2c9a266a ] When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Arnd Bergmann authored
commit e725a66c upstream. gcc-6 finds an out of bounds access in the fst_add_one function when calculating the end of the mmio area: drivers/net/wan/farsync.c: In function 'fst_add_one': drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds] #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^ include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof' #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^~~~~~~~ drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET' + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]); ^~~~~~~~~~ The warning is correct, but not critical because this appears to be a write-only variable that is set by each WAN driver but never accessed afterwards. I'm taking the minimal fix here, using the correct pointer by pointing 'mem_end' to the last byte inside of the register area as all other WAN drivers do, rather than the first byte outside of it. An alternative would be to just remove the mem_end member entirely. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 8e2ad411 ] The stack expects link layer headers in the skb linear section. Macvtap can create skbs with llheader in frags in edge cases: when (IFF_VNET_HDR is off or vnet_hdr.hdr_len < ETH_HLEN) and prepad + len > PAGE_SIZE and vnet_hdr.flags has no or bad csum. Add checks to ensure linear is always at least ETH_HLEN. At this point, len is already ensured to be >= ETH_HLEN. For backwards compatiblity, rounds up short vnet_hdr.hdr_len. This differs from tap and packet, which return an error. Fixes b9fb9ee0 ("macvtap: add GSO/csum offload support") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit c1b7fca6 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Willem de Bruijn authored
commit ea47781c upstream. As variable length protocol, AX25 fails link layer header validation tests based on a minimum length. header_ops.validate allows protocols to validate headers that are shorter than hard_header_len. Implement this callback for AX25. See also http://comments.gmane.org/gmane.linux.network/401064Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 2793a23a ] Netdevice parameter hard_header_len is variously interpreted both as an upper and lower bound on link layer header length. The field is used as upper bound when reserving room at allocation, as lower bound when validating user input in PF_PACKET. Clarify the definition to be maximum header length. For validation of untrusted headers, add an optional validate member to header_ops. Allow bypassing of validation by passing CAP_SYS_RAWIO, for instance for deliberate testing of corrupt input. In this case, pad trailing bytes, as some device drivers expect completely initialized headers. See also http://comments.gmane.org/gmane.linux.network/401064Signed-off-by:
-
Bill Sommerfeld authored
[ Upstream commit 59dca1d8 ] IPv4 interprets a negative return value from a protocol handler as a request to redispatch to a new protocol. In contrast, IPv6 interprets a negative value as an error, and interprets a positive value as a request for redispatch. UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to return a positive value for redispatch. Note that the socket's encap_rcv hook still needs to return a negative value to request dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to identify the byte containing the next protocol. Signed-off-by:
Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 48906f62 ] Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit 544c8f65 upstream. This turned out to be a bootloader device ID. No need for that in this driver. It will only provide a single serial function. Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit bf13c94c ] The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by:
-
Patrik Halfar authored
commit fb5eb24c upstream. New revison of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi
™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by:Patrik Halfar <patrik_halfar@halfarit.cz> Signed-off-by:
-
Kristian Evensen authored
commit 18715b26 upstream. SIMCom 7230E is a QMI LTE module with support for most "normal" bands. Manual testing has showed that only interface five works. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
-
Kristian Evensen authored
commit e439bd4a upstream. The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Petr Štetiar authored
commit b3d8cf01 upstream. This device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout where EC20 has QMI on interface 4 instead of 0. lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by:
Petr Štetiar <ynezz@true.cz> Acked-by:
-
Bjørn Mork authored
commit 0db65fcf upstream. New device IDs shamelessly lifted from the vendor driver. Signed-off-by:
-
Pieter Hollants authored
commit 2070c48c upstream. Added the USB IDs 0x413c:0x81b1 for the "Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card", a Dell-branded Sierra Wireless EM7305 LTE card in M.2 form factor, used eg. in Dell's Latitude E7540 Notebook series. Signed-off-by:
Pieter Hollants <pieter@hollants.com> Signed-off-by:
-
Reinhard Speyerer authored
commit e3426ca7 upstream. Sierra Wireless MC7305/MC7355 with USB ID 1199:9041 also provide a second QMI/network interface like the MC73xx with USB ID 1199:68c0 on USB interface #10 when used in the appropriate USB configuration. Add the corresponding QMI_FIXED_INTF entry to the qmi_wwan driver. Please note that the second QMI/network interface is not working for early MC73xx firmware versions like 01.08.x as the device does not respond to QMI messages on the second /dev/cdc-wdm port. Signed-off-by:
Reinhard Speyerer <rspmn@arcor.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 40b4f0fd ] As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by sctp_cmp_addr_exact(). Now sctp_v6_cmp_addr just check the port when two addresses have different family, and lack the port check for two ipv6 addresses. that will make sctp_hash_cmp() cannot work well. so fix it by adding ports comparison in sctp_v6_cmp_addr(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Diego Viola authored
[ Upstream commit ee50c130 ] The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351Signed-off-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit ff1cab37 upstream. The BSP team noticed that there is spin/mutex lock issue on sh-sci when CPUFREQ is used. The issue is that the notifier function may call mutex_lock() while the spinlock is held, which can lead to a BUG(). This may happen if CPUFREQ is changed while another CPU calls clk_get_rate(). Taking the spinlock was added to the notifier function in commit e552de24 ("sh-sci: add platform device private data"), to protect the list of serial ports against modification during traversal. At that time the Common Clock Framework didn't exist yet, and clk_get_rate() just returned clk->rate without taking a mutex. Note that since commit d535a230 ("serial: sh-sci: Require a device per port mapping."), there's no longer a list of serial ports to traverse, and taking the spinlock became superfluous. To fix the issue, just remove the cpufreq notifier: 1. The notifier doesn't work correctly: all it does is update the stored clock rate; it does not update the divider in the hardware. The divider will only be updated when calling sci_set_termios(). I believe this was broken back in 2004, when the old drivers/char/sh-sci.c driver (where the notifier did update the divider) was replaced by drivers/serial/sh-sci.c (where the notifier just updated port->uartclk). Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH] Remove old sh-sci driver"). 2. On modern SoCs, the sh-sci parent clock rate is no longer related to the CPU clock rate anyway, so using a cpufreq notifier is futile. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Eryu Guan authored
commit 5e1021f2 upstream. ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is ignored in the following "if" condition and ext4_expand_extra_isize() might be called with NULL iloc.bh set, which triggers NULL pointer dereference. This is uncovered by commit 8b4953e1 ("ext4: reserve code points for the project quota feature"), which enlarges the ext4_inode size, and run the following script on new kernel but with old mke2fs: #/bin/bash mnt=/mnt/ext4 devname=ext4-error dev=/dev/mapper/$devname fsimg=/home/fs.img trap cleanup 0 1 2 3 9 15 cleanup() { umount $mnt >/dev/null 2>&1 dmsetup remove $devname losetup -d $backend_dev rm -f $fsimg exit 0 } rm -f $fsimg fallocate -l 1g $fsimg backend_dev=`losetup -f --show $fsimg` devsize=`blockdev --getsz $backend_dev` good_tab="0 $devsize linear $backend_dev 0" error_tab="0 $devsize error $backend_dev 0" dmsetup create $devname --table "$good_tab" mkfs -t ext4 $dev mount -t ext4 -o errors=continue,strictatime $dev $mnt dmsetup load $devname --table "$error_tab" && dmsetup resume $devname echo 3 > /proc/sys/vm/drop_caches ls -l $mnt exit 0 [ Patch changed to simplify the function a tiny bit. -- Ted ] Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Martin Schwidefsky authored
commit 3446c13b upstream. The fork of a process with four page table levels is broken since git commit 6252d702 "[S390] dynamic page tables." All new mm contexts are created with three page table levels and an asce limit of 4TB. If the parent has four levels dup_mmap will add vmas to the new context which are outside of the asce limit. The subsequent call to copy_page_range will walk the three level page table structure of the new process with non-zero pgd and pud indexes. This leads to memory clobbers as the pgd_index *and* the pud_index is added to the mm->pgd pointer without a pgd_deref in between. The init_new_context() function is selecting the number of page table levels for a new context. The function is used by mm_init() which in turn is called by dup_mm() and mm_alloc(). These two are used by fork() and exec(). The init_new_context() function can distinguish the two cases by looking at mm->context.asce_limit, for fork() the mm struct has been copied and the number of page table levels may not change. For exec() the mm_alloc() function set the new mm structure to zero, in this case a three-level page table is created as the temporary stack space is located at STACK_TOP_MAX = 4TB. This fixes CVE-2016-2143. Reported-by:
Marcin Kościelnicki <koriakin@0x04.net> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.16: - 31-bit s390 is still supported so keep the #ifdef CONFIG_64BIT conditions - PMDs are not accounted so don't call mm_inc_nr_pmds() - Adjust context] Signed-off-by:
-
Ignat Korchagin authored
commit b348d7dd upstream. Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by:
Ignat Korchagin <ignat.korchagin@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Oliver Neukum authored
commit 1666984c upstream. In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Hector Marco-Gisbert authored
commit 8b8addf8 upstream. Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only the stack and the executable are randomized but not other mmapped files (libraries, vDSO, etc.). This patch enables randomization for the libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode. By default on i386 there are 8 bits for the randomization of the libraries, vDSO and mmaps which only uses 1MB of VA. This patch preserves the original randomness, using 1MB of VA out of 3GB or 4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR. The first obvious security benefit is that all objects are randomized (not only the stack and the executable) in legacy mode which highly increases the ASLR effectiveness, otherwise the attackers may use these non-randomized areas. But also sensitive setuid/setgid applications are more secure because currently, attackers can disable the randomization of these applications by setting the ulimit stack to "unlimited". This is a very old and widely known trick to disable the ASLR in i386 which has been allowed for too long. Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE personality flag, but fortunately this doesn't work on setuid/setgid applications because there is security checks which clear Security-relevant flags. This patch always randomizes the mmap_legacy_base address, removing the possibility to disable the ASLR by setting the stack to "unlimited". Signed-off-by:
Hector Marco-Gisbert <hecmargi@upv.es> Acked-by:
Ismael Ripoll Ripoll <iripoll@upv.es> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.esSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kees Cook authored
commit 82168140 upstream. In preparation for splitting out ET_DYN ASLR, this refactors the use of mmap_rnd() to be used similarly to arm, and extracts the checking of PF_RANDOMIZE. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Florian Westphal authored
commit 6e94e0cf upstream. Otherwise this function may read data beyond the ruleset blob. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
commit bdf533de upstream. We should check that e->target_offset is sane before mark_source_chains gets called since it will fetch the target entry for loop detection. Signed-off-by:
-
Helge Deller authored
commit 2ef4dfd9 upstream. Handling exceptions from modules never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. When a module triggers an exception in get_user() we need to load the main kernel dp value before accessing the exception_data structure, and afterwards restore the original dp value of the module on exit. Noticed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Helge Deller <deller@gmx.de> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Helge Deller authored
commit ef72f311 upstream. The kernel module testcase (lib/test_user_copy.c) exhibited a kernel crash on parisc if the parameters for copy_from_user were reversed ("illegal reversed copy_to_user" testcase). Fix this potential crash by checking the fault handler if the faulting address is in the exception table. Signed-off-by:
-
Helge Deller authored
commit e3893027 upstream. We want to avoid the kernel module loader to create function pointers for the kernel fixup routines of get_user() and put_user(). Changing the external reference from function type to int type fixes this. This unbreaks exception handling for get_user() and put_user() when called from a kernel module. Signed-off-by:
-
Yong Li authored
commit 9b8e3ec3 upstream. The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Signed-off-by:
Yong Li <sdliyong@gmail.com> Reviewed-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Grygorii Strashko authored
commit adf9a3ab upstream. The Keystone 2 supports DT-boot only, as result dma_mask will be always configured properly from DT - of_platform_device_create_pdata()->of_dma_configure(). More over, dwc3-keystone.c can be built as module and in this case it's unsafe to assign local variable as dma_mask. Hence, remove dma_mask configuration code. Cc: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Bjørn Mork authored
commit d48d5691 upstream. Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Martyn Welch authored
commit cddc9434 upstream. The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
-
Josh Boyer authored
commit ea6db90e upstream. A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Filipe Manana authored
commit 56f23fdb upstream. If we rename an inode A (be it a file or a directory), create a new inode B with the old name of inode A and under the same parent directory, fsync inode B and then power fail, at log tree replay time we end up removing inode A completely. If inode A is a directory then all its files are gone too. Example scenarios where this happens: This is reproducible with the following steps, taken from a couple of test cases written for fstests which are going to be submitted upstream soon: # Scenario 1 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir -p /mnt/a/x echo "hello" > /mnt/a/x/foo echo "world" > /mnt/a/x/bar sync mv /mnt/a/x /mnt/a/y mkdir /mnt/a/x xfs_io -c fsync /mnt/a/x <power failure happens> The next time the fs is mounted, log tree replay happens and the directory "y" does not exist nor do the files "foo" and "bar" exist anywhere (neither in "y" nor in "x", nor the root nor anywhere). # Scenario 2 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/a echo "hello" > /mnt/a/foo sync mv /mnt/a/foo /mnt/a/bar echo "world" > /mnt/a/foo xfs_io -c fsync /mnt/a/foo <power failure happens> The next time the fs is mounted, log tree replay happens and the file "bar" does not exists anymore. A file with the name "foo" exists and it matches the second file we created. Another related problem that does not involve file/data loss is when a new inode is created with the name of a deleted snapshot and we fsync it: mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/testdir btrfs subvolume snapshot /mnt /mnt/testdir/snap btrfs subvolume delete /mnt/testdir/snap rmdir /mnt/testdir mkdir /mnt/testdir xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir <power failure> The next time the fs is mounted the log replay procedure fails because it attempts to delete the snapshot entry (which has dir item key type of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry, resulting in the following error that causes mount to fail: [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [52174.512570] ------------[ cut here ]------------ [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]() [52174.514681] BTRFS: Transaction aborted (error -2) [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1 [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758 [52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd [52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88 [52174.524053] Call Trace: [52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90 [52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2 [52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50 [52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284 [52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs] [52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs] [52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs] [52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs] [52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs] [52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs] [52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs] [52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3 [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8 [52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59 [52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f [52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]--- Fix this by forcing a transaction commit when such cases happen. This means we check in the commit root of the subvolume tree if there was any other inode with the same reference when the inode we are fsync'ing is a new inode (created in the current transaction). Test cases for fstests, covering all the scenarios given above, were submitted upstream for fstests: * fstests: generic test for fsync after renaming directory https://patchwork.kernel.org/patch/8694281/ * fstests: generic test for fsync after renaming file https://patchwork.kernel.org/patch/8694301/ * fstests: add btrfs test for fsync after snapshot deletion https://patchwork.kernel.org/patch/8670671/Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit b6ee376c upstream. When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set before ip6_tnl_create2 is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Fixes: 0b112457 ("ip6tnl: add support of link creation via rtnl") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Paolo Bonzini authored
commit 95272c29 upstream. -ftracer can duplicate asm blocks causing compilation to fail in noclone functions. For example, KVM declares a global variable in an asm like asm("2: ... \n .pushsection data \n .global vmx_return \n vmx_return: .long 2b"); and -ftracer causes a double declaration. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: kvm@vger.kernel.org Reported-by:
Linda Walsh <lkml@tlinx.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.16: apply to compiler-gcc{4,5}.h] Signed-off-by:
-
